LG Electronics USA LNM1880NNTL CAR NAVIGATION User Manual

LG Electronics USA CAR NAVIGATION

User Manual

Download: LG Electronics USA LNM1880NNTL CAR NAVIGATION User Manual
Mirror Download [FCC.gov]LG Electronics USA LNM1880NNTL CAR NAVIGATION User Manual
Document ID3712165
Application IDU1cUxcQivTO1zspjK5SJuA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize225.14kB (2814253 bits)
Date Submitted2018-01-12 00:00:00
Date Available2018-07-11 00:00:00
Creation Date2017-12-15 10:31:04
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2018-01-12 09:10:57
Document TitleUser Manual
Document CreatorAdobe InDesign CS6 (Windows)

ENGLISH
Car Navigation System
OWNER’S MANUAL
TUSON
*XXXXXXXXX*
Thank you for purchasing this Car Navigation system.
This owner’s manual explains how to use the Hyundai Vehicle’s Navigation system.
Before using the product, read the contents of this owner’s manual carefully and use this product safely.
••The screens shown in this manual may differ from the actual screens of the product.
••The design and specification of this product may change without prior notification for product improvement.
••When transferring the vehicle to another individual, include this owner’s manual so that the next driver can continue
its use.
Precautions for safety
Safety notes
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with the arrowhead symbol
within an equilateral triangle is intended to alert
the user about the presence of uninsulated
dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Always operate the vehicle in a safe manner. Do
not be distracted by the vehicle while driving and
always be fully aware of all driving conditions.
Do not change settings or any functions.
Pull over in a safe and legal manner before
attempting such operations.
To promote safety, certain functions are disabled
unless the parking brake is on.
To reduce the risk of electric shock, do not
remove the cover or back of this product. There
are no user-serviceable parts inside. Refer
servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do
not expose this product to dripping or splashing
water, rain, or moisture.
When driving your vehicle, be sure to keep the
volume of the unit low enough to allow you to
hear sounds coming from the outside.
Do not drop it and avoid heavy impacts at
anytime.
The driver should not watch the monitor while
driving. If the driver watches the monitor while
driving, it may lead to carelessness and cause an
accident.
Precautions for safety
WARNING:
•• Don’t use a mobile phone when you are driving.
You must stop at a safe place to use a mobile
phone.
•• The use of the navigation radio by no means
relieves the driver of his/her responsibilities.
The highway code must always be observed.
Always observe the current traffic situation.
•• The applicable traffic regulations and the
prevailing traffic situation always take
precedence over the instructions issued by
the navigation system if they contradict one
another.
•• For traffic safety reasons, use the navigation
system menus only before starting a journey or
when the vehicle is stationary.
•• In certain areas, one-way streets, turn-off,
and entry prohibitions (e.g. pedestrian zones),
the navigation system will give a warning. Pay
particular attention to these kind of cases.
•• The navigation system does not take the
relative safety of the suggested routes into
consideration:
Road blocks, building sites, height or weight
restrictions, traffic or weather conditions or
other influences which affect the route safety
or travel time are not taken into consideration
for the suggested routes. Use your own
discretion in order to decide on the suitability
of the suggested routes.
•• The current legal road traffic speed limit always
takes priority over the values saved in the
data. It is impossible to provide an assurance
that the speed values of the navigation system
will always match those of the current traffic
regulations in every situation.
•• Do not rely exclusively on the navigation
system when attempting to locate an
emergency service (hospital, fire service etc.).
It cannot be guaranteed that all available
emergency services in your vicinity are saved
in the database. Use your own discretion and
abilities to secure help in such situations.
CAUTION:
•• Do not keep the navigation system running with
the engine stopped. Doing so may discharge the
vehicle battery. When you use the navigation
system, always keep the engine running.
•• Do not disassemble or modify this system.
If you do, it may result in accidents, fire, or
electrical shock.
•• Some states/provinces may have laws limiting
the use of video screens while driving. Use the
system only where it is legal to do so.
Table of contents
Precautions for safety
Table of contents
General information
Safety notes�������������������������������������������������� 3
About USB������������������������������������������������������ 8
Music file information������������������������������������ 9
Video file information������������������������������������ 9
Using iPod devices ���������������������������������������� 9
Precautions upon using iPod������������������������9
Supported iPod devices���������������������������������9
Cautions upon using SD cards ���������������������� 9
Ejecting and inserting SD cards������������������9
Usage of SD cards������������������������������������������9
Name of each component
10
Basic operation
13
Head unit�������������������������������������������������������10
Steering wheel remote control���������������������12
Starting the system for the first time���������13
Turning the system on���������������������������������13
Turning the system off���������������������������������13
AV OFF ���������������������������������������������������������13
AV ON �����������������������������������������������������������13
Adjusting the volume �����������������������������������13
Resetting the system �����������������������������������14
[Home] screen ���������������������������������������������14
Configuration for Home screen�����������������14
Basic operation for [Home] screen���������15
Editing the [All menus]��������������������������������15
Adding your favourite menu items to
[My Menu]������������������������������������������������������16
Rearranging the favourite menu items
of [My Menu]������������������������������������������������17
Deleting the favourite menu items of
[My Menu]������������������������������������������������������17
Playing last media source ��������������������������17
Radio operation
18
Listening to AM���������������������������������������������18
Opening the station list sorted in
numerical order���������������������������������������������18
Auto search����������������������������������������������������18
Saving AM favourites�����������������������������������19
Listening to FM���������������������������������������������19
Opening the station list�������������������������������20
Saving FM favourites�����������������������������������20
Scan���������������������������������������������������������������20
Sound settings ���������������������������������������������20
USB operation
21
Playing USB music ���������������������������������������21
Pause����������������������������������������������������������������21
Skip�������������������������������������������������������������������21
Search��������������������������������������������������������������21
Seek������������������������������������������������������������������21
Delete current file�����������������������������������������22
List���������������������������������������������������������������������22
Repeat��������������������������������������������������������������23
Shuffle�������������������������������������������������������������23
Sound settings�����������������������������������������������23
Viewing USB video���������������������������������������23
Switching to menu screen or full screen��23
Pause����������������������������������������������������������������23
Skip�������������������������������������������������������������������23
Search��������������������������������������������������������������24
Seek������������������������������������������������������������������24
List���������������������������������������������������������������������24
Repeat��������������������������������������������������������������24
Info��������������������������������������������������������������������24
Sound settings�����������������������������������������������24
Display settings����������������������������������������������24
iPod operation
25
Auxiliary device operation
26
Playing iPod �������������������������������������������������25
Pause����������������������������������������������������������������25
Skip�������������������������������������������������������������������25
Search��������������������������������������������������������������25
Seek������������������������������������������������������������������25
List���������������������������������������������������������������������25
Repeat��������������������������������������������������������������25
Shuffle�������������������������������������������������������������25
Sound settings�����������������������������������������������25
Playing an AUX source���������������������������������26
Sound settings�����������������������������������������������26
Table of contents
Bluetooth® audio
27
Playing Bluetooth audio�������������������������������27
Starting the Bluetooth audio����������������������27
Pause����������������������������������������������������������������27
Skip�������������������������������������������������������������������27
Repeat��������������������������������������������������������������27
Shuffle�������������������������������������������������������������27
Connection settings��������������������������������������27
Sound settings�����������������������������������������������27
Getting started with navigation 28
Precautions for safe driving�������������������������28
What is GNSS? ���������������������������������������������28
About satellite signals�����������������������������������28
Acquiring satellite signals�����������������������������28
Operating navigation screen�������������������������29
Map screen�����������������������������������������������������29
Zoom in / Zoom out�������������������������������������30
Quick menu�����������������������������������������������������30
Sound setting for navigation����������������������30
Scrolling the map screen�����������������������������30
Main Menu ���������������������������������������������������31
Sub-menu operation�������������������������������������31
Searching for destination
32
Address search���������������������������������������������32
POI (Points of interest) �������������������������������32
Searching for POI by [POI]������������������������32
Keyword search �������������������������������������������33
Favorite���������������������������������������������������������34
Adding favorite����������������������������������������������34
Finding favorite����������������������������������������������34
Viewing favorite��������������������������������������������35
Editing favorite����������������������������������������������35
Deleting favorite��������������������������������������������35
Recent�����������������������������������������������������������35
Hyundai service���������������������������������������������35
Coordinate�����������������������������������������������������35
Intersection���������������������������������������������������36
Category�������������������������������������������������������36
Current Position �������������������������������������������36
Using the route menu
37
Itinerary���������������������������������������������������������37
Adding itinerary's way points��������������������37
Viewing the map information���������������������37
Saving itinerary to [My Itinerary]������������37
Rearranging itinerary's way points����������38
Vacating itinerary's way points from
[Itinerary]��������������������������������������������������������38
Loading itinerary from [My Itinerary]
into [Itinerary]�����������������������������������������������38
Renaming itinerary from [My Itinerary]��38
Deleting itinerary from [My Itinerary]����38
Route Options�����������������������������������������������38
Turn List �������������������������������������������������������39
Best Fit���������������������������������������������������������39
Cancel Route�������������������������������������������������39
Demo�������������������������������������������������������������39
Stop Demo�����������������������������������������������������40
Bypass Waypoint�������������������������������������������40
Detour�����������������������������������������������������������40
Restricted Area���������������������������������������������40
Settings for navigation
41
Settings���������������������������������������������������������41
Map�������������������������������������������������������������������41
Display��������������������������������������������������������������41
Language���������������������������������������������������������42
POI Icon�����������������������������������������������������������42
Guidance����������������������������������������������������������42
Unit��������������������������������������������������������������������43
Speed Alert�����������������������������������������������������43
Sound���������������������������������������������������������������43
Trail�������������������������������������������������������������������44
Factory Default����������������������������������������������44
Safe Mode�������������������������������������������������������44
Checking on navigation system 45
Information���������������������������������������������������45
My Data���������������������������������������������������������45
Android Auto/Apple CarPlay - option46
What is Android Auto/Apple CarPlay?���������46
Cautions�����������������������������������������������������������46
Using Android Auto or Apple CarPlay ���������47
NOTICE�������������������������������������������������������������47
NOTICE-Android Auto����������������������������������47
NOTICE-Apple CarPlay���������������������������������47
Table of contents
Bluetooth® Wireless Technology 48
Before using the Bluetooth hands-free������48
What is Bluetooth Wireless Technology?���48
Precautions for safe driving����������������������48
Cautions upon connecting Bluetooth
phone���������������������������������������������������������������48
Pairing and connecting the unit and a
Bluetooth phone�������������������������������������������48
When no phones have been paired���������48
When a phone is already paired���������������49
When pairing additional device�����������������49
Disconnecting the connected phone��������50
Deleting Bluetooth devices�������������������������50
Making a call by entering phone number ���50
Making a call by redialling���������������������������50
Answering/Rejecting a call���������������������������51
Switching call to the mobile phone �������������51
Ending a call�������������������������������������������������51
Using the menu during a phone call������������51
Calling list�����������������������������������������������������52
Making a call from calling list��������������������52
Downloading call history�����������������������������52
Contacts �������������������������������������������������������52
Making a call from contacts����������������������52
Downloading mobile phone contacts�������53
Searching by name or number������������������53
Favourites�����������������������������������������������������53
Calling favourites�������������������������������������������53
Adding as a favourite�����������������������������������54
Deleting favourites����������������������������������������54
Phone settings ���������������������������������������������54
Settings55
[Settings] menu overview�����������������������������55
Sound �����������������������������������������������������������55
Display�����������������������������������������������������������56
Bluetooth�������������������������������������������������������57
Bluetooth connections���������������������������������57
Auto connection priority�����������������������������57
System Bluetooth info���������������������������������58
Vehicle name��������������������������������������������������58
Passkey������������������������������������������������������������58
Default��������������������������������������������������������������58
Phone projection �����������������������������������������58
Custom button�����������������������������������������������59
Date/Time�����������������������������������������������������59
Language�������������������������������������������������������59
Screensaver���������������������������������������������������60
Advanced�������������������������������������������������������60
System info���������������������������������������������������60
Version info����������������������������������������������������60
Update��������������������������������������������������������������61
Default��������������������������������������������������������������61
Using rear camera
62
About rear camera���������������������������������������62
Before thinking there is a product
defect63
Troubleshooting65
Trademarks and licenses
67
Bluetooth® Wireless Technology���������������67
iPod® ����������������������������������������������������������������67
OPEN SOURCE SOFTWARE NOTICE���������67
DivX® ����������������������������������������������������������������67
Specification68
General information
About USB
•• Take precautions regarding static electricity
when connecting/disconnecting external USB
devices.
•• Encoded MP3 players will not be recognised
when connected as an external device.
•• When connecting an external USB device, the
device may not properly recognise the USB is
in some states.
•• USB devices formatted as FAT 16/32, exFAT or
NTFS are supported.
--Read: FAT 16/32, exFAT, NTFS
--Write: FAT 16/32 (It may be limited when
using the POI export function.)
•• Some USB devices may not be supported due
to compatibility issues.
•• Avoid contact between the USB connector and
bodily parts/foreign objects.
•• Repeated connecting/disconnecting of USB
devices within short periods of time may result
in product malfunction.
•• The amount of time required to recognise the
external USB device may differ depending on
the type, size, or file formats stored on the
USB. Such differences in required time are not
indications of malfunction.
•• The device may not recognise the USB device if
separately purchased USB hubs and extension
cables are being used. Connect the USB directly
with the multimedia terminal of the vehicle.
•• When application programmes are installed to
specific USB, files may not properly play.
•• The device may not operate normally if MP3
players, mobile phones, digital cameras, or other
electronic devices (USB devices not recognised
as portable disk drives) are connected with the
device.
•• Charging through the USB may not work for
some mobile devices.
•• The device may not support normal operation
when using a USB memory type other than
metal cover type USB memory.
•• The device may not support normal operation
when using formats such as HDD type, CF, or
SD memory.
•• The device will not support files locked by DivX
DRM (Digital Rights Management).
•• USB memory sticks used by connecting an
adaptor (SD type or CF type) may not be
properly recognised.
General information
Music file information
•• Sampling frequency:
- 32, 44.1, 48 kHz (MP3, WMA, OGG, WAV)
- 1 Hz - 48 kHz (FLAC)
•• Bit rate:
- 32 ~ 320 kbps (MP3, WMA, OGG, FLAC)
- 8 bit/16 bit (WAV)
•• Version: Any version
•• Playable file format: “.mp3”/ “.wma”/ “.ogg”/
“.flac”/ “.wav”
Video file information
•• Playable file format: “.mpg”, “.mpeg”, “.dat”,
“.asf”, “.wmv”, “.mp4”, “.m4v”, “.divx”, “.avi”,
“.mkv”
•• It may not properly work depending on the
storage type.
•• During ACC ON state, connecting the iPod
through the iPod cable (The cable that is
supplied when purchasing iPod/iPhone
product.) will charge the iPod through the
system. (However, iPad is not charged.)
•• The use of genuine iPod cables supplied by
Apple is recommended. (The use of other
products may result in noise or abnormal
operation.)
•• With some iPhones, streaming audio and iPod
control may occasionally conflict. If problems
persist, remove the iPhone and connect again.
•• Use iPod with complete synchronisation to
iTunes. Unauthorised song addition may cause
abnormal operation.
•• If iPod and Bluetooth are connected
simultaneously with the same iPhone, you
cannot use Bluetooth audio function.
•• If iPod touch or iPhone is used, iOS5.0 or a
later version is recommended.
Using iPod devices
Supported iPod devices
Precautions upon using iPod
iPhone7, iPhone7 Plus
iPhoneSE
iPhone6, iPhone6 Plus, iPhone6s, iPhone6s Plus
iPhone5C, iPhone5S, iPhone5
iPhone4S, iPhone4
iPhone3GS, iPhone3G, iPhone
iPod Touch (1st through~ 5th generation)
iPod® is a registered trademark of Apple Inc.
•• Some iPods with unsupported communication
protocols may not properly operate with the
system.
•• If the iPod malfunctions due to an iPod device
defect, reset the iPod and try again. (To learn
more, refer to your iPod manual.)
iPod Nano (1st through~ 7th generation)
iPod Classic (1st through~ 6th generation)
iPad WiFi (1st through~ 4th generation)
iPad Air WiFi (1st ~2nd generation)
iPad Mini (1st ~2nd generation)
Cautions upon using SD cards
Ejecting and inserting SD cards
•• Ejecting and inserting SD cards while the
system is operating may result in SD card or
system errors. To eject or insert the SD card,
first turn off the system and the vehicle should
be off status.
•• Eject/insert SD cards only to update the map
with a new version.
•• When an SD card with the new version of
update software is installed, then the system
will reboot automatically.
Usage of SD cards
•• The SD card is formatted to include only map
and new navi S/W.
•• The SD card cannot be used to save and play
music.
•• Do not add, delete, or format files within the SD
card.
Name of each component
Head unit
1. Cover for protecting SD card (SD
card insert slot)
Insert the SD card into the slot.
2. RADIO button
Converts to the last played radio mode
(FM, AM).
3. Reset hole
Press with a thin object to reset the unit
when it does not operate normally.
4. MEDIA button
If the playable media source is one, it
moves to the corresponding screen. If
the playable media sources are more
than two, it moves to the [Media] screen.
You can select a media source. ([USB
Music]/[USB Video]/[iPod]/[Apple
CarPlay]/[AUX]/[Bluetooth
Audio]/[Android Auto])
10
5. • POWER PUSH button
--Power on
Press this button in system OFF status.
--Power off
Press and hold this button in power ON
status.
• Volume control knob (VOL)
Turn anticlockwise or clockwise to control
volume.
• AV on/off
Press this button to turn AV on or off in
power ON status.
Name of each component
10
11
6. SSEEK/TRACKW button
--When it is pressed for a short time
•• AM mode: plays previous/next available
frequency.
•• FM mode: plays previous/next available
station existing within [List] menu. (If
there is no or one station in the [List]
menu, the “Auto tuning” function is
executed.)
•• MEDIA mode: plays previous/next file.
--When it is pressed and held
•• AM mode: plays previous/next available
frequency.
•• FM mode: plays previous/next available
station existing within [List] menu.
•• MEDIA mode (except for Bluetooth,
AUX and Android Auto): rewinds or fast
forwards the file.
7. MAP button
Press to display the map screen of the
current location.
8. NAV button
Press to move to the navigation menu
screen.
9. SETUP button
Press to go to the [Settings] menu.
11
10.
(Custom button)
Press to go to the [Custom button settings]
menu. After setting, press to use desired
function.
11. ENTER/TUNE/FILE button
--AM mode: turn left/right to tune manually.
--MEDIA mode (except for Bluetooth, AUX,
Apple CarPlay and Android Auto): turn
left/right to search for the desired file and
press.
--Navigation mode: turn to the left/right to
change the map scale on the map screen.
Name of each component
Steering wheel remote control
92/
92/
1.
(MODE) button
•• Each time this button is pressed, the radio
or media mode is changed. You can select
the modes to toggle in settings.
•• If the media is not connected, it is changed
in the order FM → AM →FM.
••When it is pressed and held, AV is turned
off. (But, the voice guidance works
normally in navigation mode.)
2.
button
Press to switch to voice recognition mode
when the phone supporting Android
Auto/Apple CarPlay function is connected.
To cancel it, press the button again.
3. • Volume (VOL+/VOL-) button
Increases or decreases the volume level.
•
(MUTE) button
Press to mute the sound. (It will be paused
in some media modes.)
4. S/W button
--When it is pressed for a short time
••Radio (FM, AM) mode: plays previous/
next favourites.
••MEDIA mode: plays previous/next file.
--When it is pressed and held
••Radio (FM, AM) mode: plays previous/
next available frequency.
12
•• MEDIA mode (except for Bluetooth, AUX
and Android Auto): rewinds or fast
forwards the file.
5.
6.
button
Press to operate Bluetooth hands-free
function.
•• Press to accept a call.
•• Press to make a call from last calls.
•• Press and hold for redialling.
button
•• Press to end the phone call during a call.
•• Press to reject the call in the incoming call
screen.
Basic operation
Starting the system for the
first time
1. Press the engine start button or set the
ignition key to On or ACC.
Once the system is turned on, the booting
process will start and the safety warning
page is displayed.
warnings are related to safety, please closely
read and comply with the safety warnings.
•• If there is no operation for 10 seconds in the
safety warning screen the system automatically
switches to the last played mode.
Turning the system on
Press [POWER PUSH] on the head unit in system
OFF status.
Note
Pay attention to the volume setting when turning
the system on. A sudden output of extreme
volume upon turning the system on could lead
to hearing impairment. Adjust the volume to a
suitable levels before turning off the system.
2. Press [Confirm].
If you want to change the system language,
press [Language]. For more details, refer to
“Language” on page 59.
Notes
•• You cannot operate the system while it is
booting up. It may take some time for all of the
features to be ready.
Turning the system off
Press and hold [POWER PUSH] on the head unit
in system ON status.
AV OFF
Press [POWER PUSH] on the head unit to turn
AV off in power ON status.
•• The safety warning page is displayed every
time the ignition is turned on. The displayed
13
AV ON
Press [POWER PUSH] on the head unit to turn
AV on in AV OFF status.
Adjusting the volume
Turn the volume control knob (VOL) on the head
unit to the left/right.
Mode
Description
Radio or media
During the radio or media
playback, turn to the
left/right.
Bluetooth call
During a Bluetooth call,
turn it to the left/right.
Bluetooth bell
During an incoming call,
turn to the left/right.
Basic operation
Resetting the system
1. Date/Time
This feature is used to reset the system in the
occurrence of an unforeseen error or problem.
Press “RESET” button. (The use of a clip or pin is
recommended when resetting the system.)
•• Shows the current date and time.
•• Press the area to move to date and clock
settings.
2. AV widget
•• Shows brief information on the radio or
media currently playing.
•• Press the area to move to the mode for
what you are listening to.
3. All menus
[Home] screen
Press [All menus] to move to all of the
items of the system menu.
Configuration for Home screen
•• [Phone]: Operates Bluetooth hands-free
function.
•• [Android Auto]: Runs [Android Auto]
function.
•• [Apple CarPlay]: Runs [Apple CarPlay]
function.
•• [Quick guide]: Moves to the quick guide
menu. ([Using the touch screen], [Home],
[Bluetooth], [Phone projection])
•• [Radio]: Converts to the last played radio
mode.
14
•• [Music]: Converts to the last played music
mode.
•• [USB Video]: Converts to the last played
video mode.
•• [Current position]: Displays the map screen
of the current position.
•• [Navigation]: Moves to the [Navigation]
menu.
•• [Settings]: Moves to the [Settings] menu.
•• [My Menu]: Moves to the [My Menu]
menu.
4. Navigation
Press to move to the [Navigation] menu.
5. My Menu
•• You can add and save up 24 menu items.
•• You can add your favourite menu items to
have quick and easy access.
Basic operation
Basic operation for [Home] screen
Editing the [All menus]
1. Press [
1. Press [All menus] on the [Home] screen.
3. Select the desired menu item from the list,
then drag and drop it to a desired place.
2. Press [Edit] on the [All menus] screen.
4. Press [
] on the screen.
2. Select a desired item and it moves to the
corresponding screen.
15
].
Basic operation
Adding your favourite menu items to
[My Menu]
3. Select one of the [Radio favourites], or
[Menu shortcuts] on the screen.
Note
•• Press [
] to move to the previous screen.
•• Up to 24 menu items can be added to [My
Menu].
1. Press [My Menu] on the [Home] screen or
[All menus] screen.
•• If you select the menu item added to [My
Menu], it moves to the corresponding screen.
2. Press [Add to My Menu].
If your favourite menu items are already
added, press [Menu] > [Add].

4. Select one of the categories.
5. Mark the subcategories.
6. Press [Add] > [Yes].
•• [Mark all]: Marks all items.
•• [Unmark all]: Unmarks all items.
16
Basic operation
Rearranging the favourite menu
items of [My Menu]
Deleting the favourite menu items
of [My Menu]
1. Press [My Menu] on the [Home] screen.
1. Press [My Menu] on the [Home] screen.
2. Press [Menu] > [Rearrange].
2. Press [Menu] > [Delete].
3. Select the desired menu item from the list,
then drag and drop it to a desired place.
3. Select the desired items, then press [Delete]
> [Yes].
•• [Mark all]: Marks all items.
•• [Unmark all]: Unmarks all items.
4. Press [
].
17
Playing last media source
When you press the Engine Start button or set
the ignition key to ON/ACC ON, the media source
played the last time will play automatically. But,
the message "Reconnect last media source to
play." is displayed on the home screen if you set
the ignition key to ON/ACC ON with the existing
media source disconnected or removed.
Radio operation
Listening to AM
1. Press [RADIO] on the head unit.
2.	Press [AM] on the screen.
The AM screen of the most recent listened
station is displayed.
Favourites tuning:
Press [Favourites]. Press the favourites
numbers of the desired broadcast station.
Opening the station list sorted in
numerical order
Auto search
This function lets you automatically search the
broadcast stations with superior reception.
1. Select the AM band.
2. Press [List].
You can see station list with superior reception.
1. Press [AM] on the screen.
2. Press [List].
3. Press [
Note
Each time the [RADIO] button on the head unit is
pressed, the mode is changed in the order AM →
FM → AM.
].
Note
If you want to save the stations to [Favourites]
menu, press [ ] and then press the desired
favourites number.
3.	
Auto tuning:
Press [SSEEK/TRACKW] on the head unit.
--Plays next/previous available station.
Manual tuning:
Turn the right knob of the head unit left/right.
--The frequency moves up and down
accordingly.
18
Radio operation
Saving AM favourites
Manual tuning:
It manually saves the listening frequency to
desired favourites list.
•• In the FM mode, press [Menu] > [Manual
tune FM].
Station bar
1. Select the AM band.
2. Select the frequency to save.
3.	Press [Favourites].
4.	Press the desired favourites number.
If you want to overwrite an existing
favourites, press and hold the respective
favourites number.
Note
Each time the [RADIO] button on the head unit is
pressed, the mode is changed in the order FM →
AM → FM.
3. Auto tuning (When there are no or one
station in [List] menu):
•• Press [SSEEK/TRACKW] on the head unit.
--Plays next/previous available station.
List tuning (When there are two or more
stations in [List] menu):
Listening to FM
1. Press [RADIO] on the head unit.
2.	Press [FM] on the screen.
•• Press [SSEEK/TRACKW] on the head unit.
--Plays next/previous available station
existing within [List] menu.
The FM screen of the most recent listened
station is displayed.
19
--Drag the station bar to the left/right to
find the radio station that you want.
--Press [C/V].
--Turn the right knob of the head unit
left/right, then press it when the desired
station is displayed in a highlighted colour.
Favourites:
•• Press [Favourites]. Press the favourites
numbers of the desired broadcast station.
•• Press [S/W] on the steering wheel
remote control.
Radio operation
Scan
Opening the station list
Saving FM favourites
You can see the station list with superior
reception.
It saves the listening station to the desired
favourites list.
1. Press [FM] on the screen.
1. Press [FM] on the screen.
This function scans all stations and plays only
stations with good signal strength for 5 seconds
each.
2. Press [List].
2. Select the desired station.
Press [d Scan].
3.	Press [Favourites].
Press [Z Stop] to stop the scan function.
4.	Press the desired favourites number.
If you want to overwrite an existing
favourites, press and hold the respective
favourites number.
•• If you want to save the stations to the
[Favourites] menu, press [ ] and then
press the desired favourites number.
•• Press [Station] or [Programme type] to
arrange the list in station or programme
type order.
20
Sound settings
1. Press [Menu] > [Sound settings].
2. For details refer to page 55 (“Sound”).
USB operation
Playing USB music
You can play music files stored in a USB memory
device.
Connect a USB device to the USB port and
playback starts automatically.
Skip
Search
You can play the previous or next file.
You can fast rewind/forward to a specific point
of a file.
Position
Description
Screen
•• Press [C/V].
•• Pressing [C] after 3
seconds of playback time
plays the current file from the
beginning.
Head unit
•• Press [SSEEK/TRACKW].
•• Pressing [SSEEK] after 3
seconds of playback time
plays the current file from the
beginning.
Note
To play USB music while a different source is
playing, press [MEDIA] > [USB Music].
Position
Description
Screen
Press and hold [C/V] and
then release at the point you
want.
Head unit
Press and hold [SSEEK/
TRACKW]and then release at
the point you want.
Note
When you drag or touch the desired part on
the progress bar, the music of the selected part
plays.
Seek
You can play the file directly by searching for
the desired file.
1. To search for a desired file, turn the right
knob of the head unit left/right.
2. If the desired file is displayed, press the right
knob of the head unit to play the file.
Pause
You can pause the playing file.
Press [M] during playback.
Press [d] to play it again.
21
USB operation
Delete current file
List
You can delete the currently playing file in a USB.
You can play the desired file by searching for the
file list of the USB menu.
1. Press [List].
1. Press [Menu] > [Delete current file].
Using the list menu
1. Press [Menu] in list screen.
2. Press [Show current track].
2. Press [Yes].
2. Press the desired file after searching for a
category.
The category can be sorted by [File],
[Artist], [Song], [Album] or [Recently
added].
Note
Press [
] to move to an upper folder.
22
The screen moves to the file list currently
playing.
USB operation
Repeat
Shuffle
You can play a set of files repeatedly.
1. Press [Repeat].
You can play files in random order.
1. Press [Shuffle].
Viewing USB video
You can watch video files saved in a USB memory
device.
1. Connect a USB device to the USB port.
2. Press [MEDIA].
To play video file while a different source is
playing, press [MEDIA] > [USB Video].
Switching to menu screen or full
screen
2. Select the desired mode by pressing
[Repeat] repeatedly.
•• [
]: Plays all files sequentially.
2. Select the desired mode by pressing
[Shuffle] repeatedly.
•• [
]: Plays all files randomly.
]: Repeats all files within the current
•• [
folder.
Sound settings
•• [
2. For details, refer to page 55 (“Sound”).
]: Repeats the current file, only.
1. Press [Menu] > [Sound settings].
Press the screen repeatedly.
(If there is no operation for 10 seconds on menu
screen mode, it switches to full screen mode.)
Pause
You can pause the playing file.
For details, refer to page 21 (“Pause”).
Skip
You can play the previous or next file.
For details, refer to page 21 (“Skip”).
]: Plays the files sequentially within
•• [
the [Artist], [Song], [Album] or [Recently
added].
23
USB operation
Search
Repeat
Info
You can fast forward/rewind to a specific point
of a file.
For details refer to page 21 ("Search").
You can play a set of files repeatedly.
1. Press [Repeat].
This menu shows File name, Resolution and Total
time of the currently playing video.
2. Select the desired mode by pressing
[Repeat] repeatedly.
Sound settings
Press [Info].
Seek
You can play the file directly by searching for
the desired file.
For details refer to page 21 ("Seek").
List
You can search for a desired video using the
video list.
1. Press [List].
•• [
]: Plays all files sequentially.
]: Repeats all files within the current
•• [
folder.
•• [
]: Repeats the current file, only.
1. Press [Menu] > [Sound settings].
2. For details refer to page 55 (“Sound”).
Display settings
1. Press [Menu] > [Display settings].
2. For details refer to page 56 ("Display").
•• To move to the file list screen currently
playing, press [Menu] > [Now playing].
•• Press [
] to move to an upper folder.
2. Press the desired video.
24
iPod operation
Playing iPod
1. Press [List].
2. Select the desired mode by pressing
[Repeat] repeatedly.
1. Use an iPod exclusive cable to connect an
iPod to the USB connector.
2. Press [MEDIA].
To play an iPod while a different source is
playing, press [MEDIA] > [iPod].
Skip
You can play the previous or next file. For details,
refer to page 21 (“Skip”).
Search
You can fast rewind/forward to a specific point
of a file. For details, refer to page 21 (“Search”).
]: Plays all files sequentially.
•• [
]: Repeats the current file, only.
Shuffle
You can play files in random order.
1. Press [Shuffle].
Pause
You can pause the playing file. For details, refer
to page 21 (“Pause”).
•• [
2. Press the desired file after searching for
[Playlist], [Artist], [Album], [Song], or
[Other].
Repeat
You can play a set of files repeatedly.
1. Press [Repeat].
2. Select the desired mode by pressing
[Shuffle] repeatedly.
Seek
•• [
You can play the file directly by searching for
the desired file. For details, refer to page 21
(“Seek”).
]: Plays all files randomly.
Sound settings
1. Press [Menu] > [Sound settings].
List
2. For details, refer to page 55 (“Sound”).
You can play the desired file by searching in the
files list in the iPod Menu.
25
Auxiliary device operation
Playing an AUX source
1. Connect an auxiliary device to the AUX
terminal.
2. Play the auxiliary device.
Note
To play an auxiliary device while a different
source is playing, press [MEDIA] > [AUX].
Sound settings
1. Press [Menu] > [Sound settings].
2. For details refer to page 55 (“Sound”).
26
Bluetooth® audio
Playing Bluetooth audio
•• Music stored in the mobile phone can be played
in the car through Bluetooth audio streaming.
•• Bluetooth audio can be played only when a
Bluetooth phone or Bluetooth audio device
has been connected. To play Bluetooth audio,
connect the Bluetooth phone to the car system.
For more information on connecting Bluetooth,
please refer to the owner’s manual [Pairing and
connecting the unit and a Bluetooth phone] on
page 48.
Starting the Bluetooth audio
Repeat
1. Connect your Bluetooth device to the head
unit.
You can play a set of files repeatedly.
Select the desired mode by pressing [Repeat]
repeatedly.
2. Press [MEDIA].
The Bluetooth audio screen is displayed.
You can play files in random order.
Select the desired mode by pressing [Shuffle]
repeatedly.
Note
These features may not be supported in some
Bluetooth devices.
•• If Bluetooth is disconnected while playing
Bluetooth audio, the audio stream will be
interrupted.
•• The audio streaming function may not be
supported in some mobile phones. Only one
function can be used at a time. You can not use
the Bluetooth hands-free and the Bluetooth
audio function at the same time. For example, if
you convert to the Bluetooth hands-free while
playing Bluetooth audio, the music stream is
paused.
•• Playing music from the car is not possible when
there are no music files saved in the mobile
phone.
Shuffle
Connection settings
Note
To play Bluetooth audio while a different source
is playing, press [MEDIA] > [Bluetooth Audio].
2. For details refer to page 57 (“Bluetooth
connections”).
Sound settings
Pause
Press [
Press [
1. Press [Menu] > [Connection settings].
] during playback.
] to play it again.
Skip
You can play the previous or next file.
For details refer to page 21 (“Skip”).
27
1. Press [Menu] > [Sound settings].
2. For details refer to page 55 (“Sound”).
Getting started with navigation
Precautions for safe driving
Please observe and comply with local traffic
rules and regulations.
•• The route displayed for destination guidance
is a reference and the route guidance will take
you to the vicinity of your destination. The
highlighted route is not always the shortest
distance, the least congested, and in some
cases, might not be the fastest route.
•• Road, name, POI and speed limit may not always
be completely updated.
•• The car position mark does not indicate
your exact location. This system uses GNSS
information, various sensors, and road map
data to display the current position. However,
errors in displaying your location may occur if
the satellite is transmitting inaccurate signals
or less than two satellite signals are received.
Errors that occur in such conditions cannot be
corrected.
•• The position of the vehicle within the navigation
may differ from your actual location depending
on various reasons, including the satellite
transmission state, vehicle state (driving
location and conditions), etc. Additionally, the
car position mark may differ from the actual
position if the map data is different from the
actual road landscape, such as changes due
to the construction of new roads. If such
differences occur, driving for a short period
of time will automatically correct the position
of the vehicle through map matching or GNSS
information.
About satellite signals
What is GNSS?
2. Turn on the unit.
The GNSS(Global Navigation Satellite System) is
a satellite-based navigation system made up of
a network of 32 satellites placed into orbit by
the Global Positioning System (GPS) of U.S.A,
GLONASS of RUSSIA, etc.
GNSS works in any weather conditions, anywhere
in the world, 24 hours a day.
There are no subscription fees or setup charges
to use GNSS.
28
Your unit must acquire satellite signals to
operate. If you are indoors, near tall buildings
or trees, or in a parking garage, the unit cannot
acquire satellite signals.
Acquiring satellite signals
Before the unit can determine your current
position and navigate a route, you must take the
following steps:
1. Go outside to an area free from tall
obstructions.
Acquiring satellite signals can take a few
minutes.
Getting started with navigation
Operating navigation screen
4. Clock display
Displays the current time.
The navigation system displays various
information on the map screen.
Press [MAP] or [NAV] > [Map] to access the map
screen.
14
13
12
11
10
1.
Displays the distance to next turn, maneuver
at next turn and serial turn. Press to repeat
voice instructions.
2.
Displays speed cameras.
3. [
Displays GPS receiver status. Press to check
GPS information.
--The status is green: GPS signal good.
5. Map view button
Changes the map view perspectives.
Map screen
9.
] button
Press [ / ] button to set the zoom level
on the map screen.
Press [
] repeatedly to switch them.
--2D North-up: The map always points
north regardless of the direction that the
vehicle is moving.
--2D Heading-up: The map always displays
the vehicle’s direction as proceeding
towards the top of the screen.
--3D Heading-up: The map always displays
the basic outline and details of the
surrounding roads and general area.
--The status is red: GPS signal lost.
10. [
Displays functions in the sub menu.
11. PIP (Picture In Picture)
Displays the upcoming route with the
enlarged and simple picture when driving.
12. Vehicle position mark
Displays current vehicle position and direction.
--The mark is green: GPS signal good.
--The mark is Yellow: GPS signal weak.
6. Remaining distance display
--The mark is red: GPS signal lost.
Displays the remaining distance to the
destination.
7. Street/city information display
Displays the current street information or city
information. Press to switch the display.
8. Arrival time display
Displays the estimated time until the arrival at
the destination.
29
] button
--The mark is grey: When simulating.
13.
Displays speed limit information on the road.
14.
Displays the instruction for current turn.
Press to access the turn list.
Getting started with navigation
Zoom in / Zoom out
Sound setting for navigation
Scrolling the map screen
To set the zoom level on the map screen, turn
the right knob of the head unit left/right.
1. Press [
Drag and drop the map screen to the desired
direction, then touch the desired point.
Information on the point is displayed on the
screen. It can be used as an electronic map.
] on the quick menu.
Quick menu
1. Press [
] on the map screen.
2. Set the guidance volume of navigation by
pressing [a]/[d], then press [Apply].
2. Press the desired item.
]: Press [
•• [
sub menu.
] to open or close the
•• [
]: Cancels the route when it is set.
•• [
]: Moves to the home when it is set.
•• [
]: Moves to the sound settings screen.
Note
You can access the sound setting menu for
navigation by pressing [ ] > [Sound].
1.
Displays compass. Press to change the orient
of map.
2.
button
Press the button to switch the map screen to
2D or 3D.
]: Finds a destination by searching for
•• [
POI near the current position.
3. Selected location mark
Displays selected location (road or POI) with
information panel about it.
]: Starts simulation when the route is
•• [
set. (Page 39)
30
Getting started with navigation
4.
Displays scale ruler.
5. [ ] button
Rotates the map screen.
Press [
6. [
Main Menu
1. Press [NAV] or touch anywhere on the map
screen.
•• [ ] (Information): Displays [GPS],
[Statistics] and information about the
navigation system. (Page 45)
Sub-menu operation
All sub-menus of navigation have the following
features at the top of the screen.
] repeatedly to rotate or stop it.
] button
Returns to current vehicle position.
7. [Main Menu] button
Moves to the main menu of navigation.
2. Press the desired option.
•• [Find]: Finds a destination by using the
[Find] menu. (Pages 32-36)
•• [Map]: Moves to the map screen or
navigation/free run screen.
•• [Route]: Accesses the current route,
itinerary, statistics and map information.
(Pages 37-40)
•• [ ] (Settings): Changes the software
settings of navigation. (Pages 41-44)
•• [ ] (My Data): Maintains user specific
information like [My Favorite], [My
Itinerary], [My Trail], and [Clear Data].
(Page 45)
31
•• [
]: Moves to navigation/free run screen.
•• [
]: Moves to the main menu.
•• [
]: Moves to the previous screen.
Searching for destination
Address search
You can find the destination by searching for an
address.
3. Select the desired item from the list (over
and over).
1. Press [Find] > [Address].
POI (Points of interest)
You can set a POI as the destination using
different search methods.
Searching for POI by [POI]
When searching for POI by POI name in
[POI]
1. Press [Find] > [POI].
2. Enter the city name, then press [Done].
•• If you want to search for a list of nearby
POI or streets, press [Nearby].
•• If you want to save the location as the [My
Favorite], press [Save As].
•• If you want to know information about the
selected location, press [Info].
•• If you want to add intermediate waypoint
in route to your destination or set the
location as the start point to simulate the
route, press [Advanced].
4. Press [Go To].
•• When the destination already set exists,
press [Replace] to move to another
destination recently set.
•• Press [Extend] to extend the destination
already set.
•• Press [Cancel] if you don’t want the
[Replace], [Extend].
32
2. Enter a POI name, then press [Done].
3. Follow steps 3-4 of the “Address search” on
page 32.
Searching for destination
When searching for POI by [Nearby] in
[POI]
1. Press [Find] > [POI].
2) When selecting the [Near Car], follow
steps 3-4 of the “Address search” on
page 32.
Keyword search
You can find the destination by searching for a
key word.
1. Press [Find] > [Keyword].
2. Enter a key word, then press [Done].
2. Press [Nearby], then select one of the
[Around City]/[Near Car].
3. 1) When selecting the [Around City], follow
steps 2-4 of the “Address search” on
page 32.
When searching for POI by [Phone] in
[POI]
1. Press [Find] > [POI] > [Phone].
2. Enter a phone number, then press [Done].
3. Follow steps 3-4 of the “Address search” on
page 32.
33
Searching for destination
3. Select one of the [POI], [City Center],
[Street], [All].
Favorite
3. Press [OK].
If your favorites are already in the [Favorite]
menu, they can be easily retrieved by pressing
them.
First of all, store a favorite through [Save As]
of the “Address search” in order to activate
the [My Favorite] menu. Then, you can store
favorites in the [My Favorite] menu.
Adding favorite
•• If you want to stop a search, press [Stop].
4. Follow steps 3-4 of the “Address search” on
page 32.
1. Press [
] > [My Favorite].
4. Press [>] to change the name and select one
of the Most Favorite, Home, Special Location,
then press [Save].
It is saved in the [My Favorite] menu
automatically.
Note
You can also store a favorite in the [My Favorite]
menu through [Save As] of the “Address
search”. (Page 32)
2. Press [Add], then select the desired position
through the destination search function.
34
Finding favorite
1. Press [Find] > [Favorite].
2. Follow steps 3-4 of the “Address search” on
page 32.
Searching for destination
Viewing favorite
Recent
Coordinate
1. Press [
The destinations set through the search function
are automatically saved in the [Recent] menu.
You can reset them as the destination from the
[Recent] menu.
1. Press [Find] > [Recent].
2. Follow steps 3-4 of the “Address search” on
page 32.
You can find a destination by entering the
coordinates of latitude and longitude.
1. Press [Find] > [Coordinate].
] > [My Favorite].
2. Select the desired item from the list, then
press [View].
Switches to the map screen on what you
select.
3. Press [Info] to check information on what
you select. Press [Map] to switches to the
map screen again.
Editing favorite
1. Press [
] > [My Favorite].
2. Select the desired item from the list, then
press [Edit].
3. Press [>] to change the name if you want
and select one of the Most Favorite, Home,
Special Location, then press [Save].
Deleting favorite
1. Press [
] > [My Favorite].
2. Select the desired item from the list, then
press [Delete] > [Yes].
Hyundai service
You can set the facilities of Hyundai dealers as
the destination.
1. Press [Find] > [Hyundai].
•• You can also search for the facilities of
Hyundai dealers by pressing [Keyword].
2. Follow steps 3-4 of the “Address search” on
page 32.
Note
The information for the dealers facilities may
not correspond with a result of map information,
since the information can be provided up to date.
35
Searching for destination
2. Press  and  respectively.
Intersection
Category
You can use this menu to determine the
intersection of two streets.
You can search for a POI by the [Category]
menu.
1. Press [Find] > [Intersection].
1. Press [Find] > [Category].
2. Enter each search box, then press [Done].
2. Follow steps 3-4 of the “Address search” on
page 32.

3. Enter the coordinates and press [Done]
respectively.
4. Press [Done] again, then follow steps 3-4 of
the “Address search” on page 32.
3. Follow steps 3-4 of the “Address search” on
page 32.
Current Position
Press [Current Position] if you want to know
information on the current positon.
1. Press [Find] > [Current Position].
2. Follow steps 3-4 of the “Address search” on
page 32.
36
Using the route menu
Itinerary
The itinerary is a list of users who have defined
their way points to their destination. The
itinerary can be added/deleted/edited and its
order can be changed.
3. Select a way point through the destination
search function, then press [OK].
Adding itinerary's way points
Viewing the map information
1. Press [Route] > [Itinerary].
2. Press the desired item from the list.
3. Press [Info] to check information on what
you select. Press [Map] to switches to the
map screen again.
Saving itinerary to [My Itinerary]
1. Press [Route] > [Itinerary].
4. If you want to add a way point (over and
over), follow steps 2-3.
5. Press [Go] if you want to start the itinerary's
route guidance.
If the itineraries are already saved in the [My
Itinerary] menu, they can be easily retrieved to
set the route.
First of all, you can save a itinerary to the [My
Itinerary] menu when you add the Itinerary’s
way points.
1. Press [Route] > [Itinerary].
2. Press [Save].
2. Press [Add].
3. Enter the itinerary name, then press [Done].
It is saved in the [My Itinerary] menu
automatically.
37
Using the route menu
Rearranging itinerary's way points
1. Press [Route] > [Itinerary].
2. Press [Edit].
Loading itinerary from [My
Itinerary] into [Itinerary]
1. Press [ ] > [My Itinerary].
2. Select the desired item from the list, then
press [Load].
Route Options
You can modify various route options according
to your needs.
1. Press [Route] > [Route Options].
•• When the itinerary already set exists in the
[Itinerary] menu, press [Yes] to replace it.
•• Press [No] if you don’t want to replace it.
Renaming itinerary from [My
Itinerary]
3. Select the desired item from the list, then
press [Move Up] or [Move Down].
4. Press [Done].
Vacating itinerary's way points from
[Itinerary]
This operation doesn’t mean the itinerary
saved in the [My Itinerary] menu is deleted, but
mean the itinerary from the [Itinerary] menu is
vacated.
1. Press [Route] > [Itinerary].
2. Press [Edit].
1. Press [ ] > [My Itinerary].
2. Select the desired item from the list, then
press [Rename].
3. Enter a desired name, the press [Done].
Deleting itinerary from [My
Itinerary]
1. Press [ ] > [My Itinerary].
2. Select the desired item from the list, then
press [Delete].
3. Press [Yes].
3. Select the desired item from the list, then
press [Delete].
2. Set the desired options, then press [Apply].
•• [Routing Method]: This option allows you
to set the routing method as the Shorter
(distance), Faster (time).
••[Avoid Highway]: Highway is not
considered as route solutions.
••[Avoid Toll Road]: Toll roads is not
considered as route solutions.
••[Avoid Minor Road]: Minor roads in
communities or paved for walker is not
considered as route solutions.
••[Avoid Ferry]: Ferry is not considered as
route solutions.
4. Press [Done].
38
Using the route menu
••[Ask every time before planning]: This
option allows you to set route options
each time you plan your route.
Note
The options set by user may not be supported
depending on condition.
Best Fit
Demo
You can check the entire route between your
current location and your destination.
This function allows the user to simulate a route
guidance when a route is set.
Press [Route] > [Best Fit].
1. Press [Route] > [Demo].
Turn List
This function allows you to view the distance to
the next guide point and the turning direction at
that guide point.
1. Press [Route] > [Turn List].
•• [1x], [2x], [4x], [Full]: Set the speed of
driving simulation by pressing [a]/[d].
Cancel Route
If you want to stop the route guidance with
a route set, press [Route] > [Cancel Route] >
[Yes].
2. Press the desired items to view a turn.
A map showing the location of the turn is
load.
39
•• [Repeat]: Select whether to repeat driving
simulation.
Using the route menu
2. Press [Start Demo].
Bypass Waypoint
Restricted Area
The route is recalculated to bypass waypoint
around the location or street when an itinerary
has more than 2 way points.
By using this menu, the most efficient traffic plan
will be provided to you according to having or
not having permission to enter different traffic
zones.
When the planned route passes through the
restricted area without permission, the navigation
system will display a warning message “You don’t
have permission! Can you go through restricted
area now?”.
If you press [Yes], the system starts navigation
according to the original route, otherwise it will
calculate another one.
Press [Route] > [Bypass Waypoint] > [Yes].
Detour
The route is recalculated to take a detour around
the location or street.
•• [ / ]: Pauses or plays the driving
simulation.
1. Press [Route] > [Detour].
•• [ ]: Ends the driving simulation.
•• [ ]: Sets the speed of driving simulation
slowly.
1. Press [Route] > [Restricted Area].
•• [ ]: Sets the speed of driving simulation
fastly.
Stop Demo
When you press [NAV] during driving simulation,
press [Route] > [Stop Demo] to stop driving
simulation.
2. Select the desired item from the list.
The route is recalculated and the map screen
is displayed automatically.
2. Select the desired options, then press
[Apply].
40
Settings for navigation
Settings
Map
Display
The navigation system offers a high degree of
personalization settings as well as normal system
settings.
For dual language map, this option could be
selected to dispaly the default language on the
map screen.
This menu allows you to change the display
features used by the navigation.
Press [ ] on the main menu screen to change
the software settings of navigation.
1. Press [
] > [Map].
You can adjust the colour scheme to suit your
current lighting conditions for ease of visibility
and font size.
1. Press [
2. Select the desired language displayed on the
map screen by pressing [a]/[d], then press
[Apply].
] > [Display].
2. Select the desired options by pressing [D] >
[Done] or pressing [a]/[d].
3. Press [Apply].
41
Settings for navigation
Language
POI Icon
Guidance
This menu allows you to change languages in
using the navigation system.
All POI icons or several POI icons can be revealed
or hidden on the map screen for the improvement
of visibility.
This menu allows you to adjust Map Orientation
and set Auto Zoom, Approaching View, Turn PIP
and Next Street as Enable/Disable.
1. Press [
1. Press [
1. Press [
] > [Language].
2. Select the desired options by pressing
[D]/[a]/[d], then press [Apply].
•• [Text]: In the navigation system, there are
2 texts to be selected.
•• [Voice]: In the navigation system, there are
5 voice prompts to be selected
•• [Input Method]: In the navigation system,
you can select the input method to be the
default keyboard when entering words.
] > [POI Icon].
2. Select the desired items to reveal or hide
them, then press [Done].
•• [Show All]: Shows all POI icons on the map
screen.
•• [Hide All]: Hides all POI icons on the map
screen.
42
] > [Guidance].
2. Select the desired options by pressing
[a]/[d], then press [Apply].
Settings for navigation
Unit
Speed Alert
Sound
This menu allows you to change the measurement
units (distance) in using the navigation system.
You can set whether you will be notified about
speed cameras on the map screen and warned
against driving too fast.
You can set the sound setting for navigation. For
example, you can set Mute as On/Off and adjust
the guidance volume of navigation.
1. Press [
1. Press [
1. Press [
] > [Unit].
2. Select the desired option by pressing
[a]/[d], then press [Apply].
] > [Speed Alert].

] > [Sound].
2. Select the desired options by pressing
[a]/[d], then press [Apply].
Note
You can access the sound setting menu for
navigation by pressing [
] on the quick menu.

2. On each screen, select the desired options
by pressing [a]/[d], then press [Apply].
43
Settings for navigation
Trail
Factory Default
Safe Mode
To enable the trail function, you can log the trail.
You can set the file name to save, interval and
file size.
If you would like to clear all the settings in
the navigation system, you could restore them
through the factory default menu.
When the file size reach the set value, the
navigation system stops logging the trail.
Press [
This menu allow you not to touch the screen
when the vehicle speed is above 40km/hr. This is
to prevent you form dangerous operation when
driving.
1. Press [
] > [Factory Default] > [Yes] > [OK].
] > [Trail].
To touch the screen is possible when the vehicle
speed is below 40km/hr.
1. Press [
2. Select the desired options by pressing
[D]/[a]/[d], then press [Start Log].
] > [Safe Mode].
2. Set the safe mode as On/Off by pressing
[a]/[d], then press [Apply].
•• [Name]: Change the trail’s name, then
press [Done].
•• [Interval]: Set the interval as 1sec, 3secs,
5secs, 10secs, 1min, 5mins.
•• [File Size]: Set the file size as 1M, 5M,
10M.
3. Press [Trail] > [Stop Log] if you want to stop
the log.
44
Checking on navigation system
Information
My Data
This menu gives you information about your
route, itineraries, destinations, locations, and
maps.
In My Data, the navigation system offers the
UI to access your personal data such as My
Favorite, My Itinerary and My Trail.
Press [
] on the main menu screen.
You can save, edit or delete the personal data for
the conveniences of next time usage.
Press [
•• [GPS]: Accesses information about satellite
coverage, current time, longitude, latitude,
altitude, quality of the signals received and
the status.
•• [Statistics]: Accesses information about
your current location, heading, velocity,
time, etc.
•• [Map]: Accesses information about the
maps the navigation system is using and
what maps you have available.
•• [About]: Accesses information about the
navigation system, version number, memory
usage, etc.
] on the main menu screen.
•• [My Favorite]: You can edit your favorite
destinations by accessing the my favorite
menu.
•• [My Itinerary]: You can retrieve a planned
itinerary by pressing Load button. After
having a loaded itinerary (current itinerary),
you can add, edit or save the itinerary. If a
route already exists before you retrieve an
itinerary, a warning message will be shown.
45
•• [My Trail]: You can use [Rename] or
[Delete] to manage the trails, also show a
trail on the map screen by pressing [Show].
•• [Clear Data]: You can clear the data you
have saved here.
Android Auto/Apple CarPlay - option
※※ A
 ndroid Auto and Apple CarPlay aren't
available in some countries.
•• Your phone may not be recognised if its battery
is low. Charge your phone then try again.
What is Android Auto/Apple
CarPlay?
•• If your phone is shut down due to a defect
in the device itself, reset your phone and try
again.
Securely access your mobile phone while driving.
Various functions of your mobile phone are
displayed on and operable from the screen of
the multimedia device (e.g. navigation, making a
call, listening to music etc.)
When connected, an Android Auto/Apple CarPlay
icon appears on the screen. Available functions
and operations may differ depending on the
company model.
For more information, visit the Google or Apple
website.
--Google: http://support.google.com/
androidauto/
--Apple: http://www.apple.com/ios/carplay/
•• If the USB cable of the Android Auto/Apple
CarPlay device is repeatedly disconnected
and reconnected in a short period of time, the
phone may malfunction. This can also cause a
device failure.
Cautions
•• Apple CarPlay cannot be run while making a
call via Bluetooth.
•• Android Auto is a registered trademark of Google Inc.
•• Apple CarPlay is a registered trademark of
Apple Inc.
•• Android Auto and Apple CarPlay are unavailable
if the phone OS is not the latest version or
if the phone cannot be recognized due to a
shutdown caused by a failure or defect in the
device itself.
•• The device recognition time may differ
depending on the device type and firmware/OS
version.
•• Using the USB cable that came with the phone
is recommended. (Using a non-genuine product
may cause noise or malfunction.)
•• Normal operations cannot be guaranteed if the
phone is arbitrarily manipulated while Android
Auto/Apple CarPlay is active.
•• Android Auto or Apple CarPlay may not operate
normally due to mobile phone issues.
•• Carrier charges may apply when using Android
Auto or Apple CarPlay.
※※ S ome features may not operate normally
according to the version of iOS and Android.
46
•• The following problems may occur due to
phone-related issues:
[Android Auto]
--Intermittent black screens appear when
entering Android Auto.
--Differentiation of phones that support
Android Auto and those which do not, may
not be possible.
--Black screens appear in some areas of the
screen due to app errors.
[Apple CarPlay]
--Intermittent black screens appear when
entering Apple CarPlay.
--Black screens appear in some areas of the
screen due to app errors when navigating
between screens in Apple CarPlay.
--The audio volume control may not operate
depending on the status of connected phone.
Apple CarPlay can control the volume on the
head unit regardless of phone volume. Even if
the phone volume is set to 0, the sound can be
outputted by controlling the volume of head unit.
--The sound output of a call may be cut upon
disconnecting Apple CarPlay during a call via
Apple CarPlay.
※※ If services do not work properly due to
problems similar to the specified above,
check your phone, and if necessary,
reconnect your phone after restarting.
Android Auto/Apple CarPlay - option
Using Android Auto or Apple
CarPlay
1. Make sure only genuine USB cables are used
that were provided by the mobile phone´s
manufacturer.
2. Enter Android Auto /Apple CarPlay from
the home screen or from the submenu [All
menus].
3. Now the features such as navigation, music
and phone are ready to be used.
NOTICE
•• Before connecting your mobile phone, check
whether Android Auto or Apple CarPlay is
activated in the [Phone projection] menu.
•• After connecting the mobile phone, the phone
has to be unlocked and the disclaimers on the
phone have to be accepted in order to launch
Android Auto or Apple CarPlay.
NOTICE-Android Auto
NOTICE-Apple CarPlay
•• Bluetooth media features will be disabled when
Android Auto is activated. After removing the
USB cable, these features will be available
again.
•• Bluetooth phone/media features will be
disabled when Apple CarPlay is activated. After
removing the USB cable, these features will be
available again.
•• If Android Auto is not activated even after a
successful connection, follow these steps:
•• If Apple CarPlay is not activated even after a
successful connection, follow these steps:
--Check whether an error occurred on the
phone.
--Check whether Apple CarPlay is disabled in
the iPhone´s application settings.
--Check whether Android Auto has been closed
on the phone.
--Check whether Apple CarPlay is activated in
the [Phone projection] menu.
--Check whether Android Auto is activated in
the [Phone projection] menu.
•• If Android Auto does not work normally even
after a reconnection has been made, visit the
Google website http://support.google.com/
androidauto/
•• The screens and features displayed on the
multimedia system correspond to the screens
and features provided by Google or Apple. They
are subject to changes according to the policy
of the respective company.
47
•• If Apple CarPlay does not work normally even
after a reconnection has been made, visit
the Apple website http://www.apple.com/ios/
carplay/
Bluetooth® Wireless Technology
Before using the Bluetooth
hands-free
What is Bluetooth Wireless
Technology?
•• Bluetooth Wireless Technology refers to a shortdistance wireless networking technology which
uses a 2402 MHz ~ 2480 MHz frequency to
connect various devices within a certain distance.
•• Supported within PCs, external devices, Bluetooth
phones, PDAs, various electronic devices, and
automotive environments, Bluetooth Wireless
Technology is transmitted at high speeds without
having to use a connector cable.
•• Bluetooth hands-free refers to a device which
allows the user to conveniently make phone calls
with Bluetooth mobile phones through the system.
•• The Bluetooth hands-free feature may not be
supported in some mobile phones.
Precautions for safe driving
•• Bluetooth hands-free is a feature that enables
drivers to practice safe driving. Connecting the
head unit with a Bluetooth phone allows the
user to conveniently make calls, receive calls,
and manage the phone book. Before using
Bluetooth Wireless Technology, carefully read
the contents of this owner’s manual.
•• Excessive use or operations while driving may
lead to negligent driving practices and be the
cause of accidents. Do not operate the device
excessively while driving.
•• Viewing the screen for prolonged periods of
time is dangerous and may lead to accidents.
When driving, view the screen only for short
periods of time.
Pairing and connecting the
unit and a Bluetooth phone
Cautions upon connecting Bluetooth
phone
When no phones have been paired
•• Before connecting the head unit with the
mobile phone, check to see that the mobile
phone supports Bluetooth features.
•• If you do not want automatic connection with
your Bluetooth device, turn the Bluetooth
feature off on the Bluetooth device.
•• Park the vehicle when pairing the head unit
with the mobile phone.
•• Some Bluetooth features may occasionally not
operate properly depending on the firmware
version of your mobile phone. If such features
can be operated after receiving a S/W upgrade
from your mobile phone manufacturer, unpair
all devices and pair again before use.
48
To use the Bluetooth feature, make sure the
Bluetooth on your phone is turned on. Refer to
your phone’s user guide.
1.	
Press [ ] > [All menus] > [Phone]. Or press
[ ] on the steering wheel remote control.
•• [Cancel]: Cancels Bluetooth connection.
2. In your phone, initiate a search for Bluetooth
devices. (The default vehicle name is
HYUNDAI MOTORS.)
3. 1) If the SSP (Secure Simple Pairing) is not
supported, enter the passkey on your
Bluetooth device. (The default passkey
is 0000.)
2) If the SSP (Secure Simple Pairing) is
supported, press [Yes] on the pop-up
screen of your Bluetooth device.
 (The pop-up screen may differ from the
actual information of the Bluetooth device.)
Bluetooth® Wireless Technology
4. Bluetooth device is connected.
The mobile phone contacts and the calling
list are downloaded.
When the connection fails, a failure message
is displayed on the screen.
2) When using [
] button, press [
].
When a phone is already paired
1.	
Press [ ] > [All menus] > [Phone]. Or press
[ ] on the steering wheel remote control.
2. Press the device from the Bluetooth device
list pop-up screen.
If you want to pair additional device, press
[Add new]. Follow the steps 3-4 of “When
no phones have been paired”.
When pairing additional device
1. 1) W
 hen using [SETUP] button, press
[SETUP] > [Bluetooth] > [Bluetooth
connections].
2. 1) Select the device you want to connect.
2) If there is no device you want to
connect, press [Add new].
3. In your phone, initiate a search for Bluetooth
devices. (The default vehicle name is
HYUNDAI MOTORS.)
4. 1) If the SSP (Secure Simple Pairing) is not
supported, enter the passkey on your
Bluetooth device. (The default passkey
is 0000.)
2) If the SSP (Secure Simple Pairing) is
supported, press [Yes] on the pop-up
screen of your Bluetooth device.
(The pop-up screen may differ from
the actual information of the Bluetooth
device.)
49
5. Bluetooth device is connected.
The mobile phone contacts and the calling
list are downloaded.
When the connection fails, failure message is
displayed on the screen.
Notes
•• For safety reasons, pairing a Bluetooth phone
is not possible when the vehicle is in motion.
Park the vehicle in a safe location to pair a
Bluetooth phone. It is possible to pair up to 5
mobile phones. In order to pair new phone, you
must first delete one of the previously paired
phones.
•• Some functions may not be supported due to
limited Bluetooth compatibility.
•• When a Bluetooth device is connected, a new
device cannot be paired.
Bluetooth® Wireless Technology
Disconnecting the connected phone
Deleting Bluetooth devices
1. Press [SETUP] > [Bluetooth] > [Bluetooth
connections].
If you do not need to use a phone any longer,
you can delete it. Note that deleting a Bluetooth
device will delete all calling list and contact
entries.
1. Press [SETUP] > [Bluetooth] > [Bluetooth
connections] > [Delete devices].
2. Select the connected phone.
Making a call by entering
phone number
Connect your unit and Bluetooth phone before
making a call.
1. Enter the phone number using the keypad on
the phone screen.
2. Press [ ] on the phone screen or [
the steering wheel remote control.
Note
If you press the wrong number, press [
delete one digit of the entered number.
3. Press [Yes].
Note
If you want to connect the disconnected phone
again, select the disconnected phone.
] on
] to
Making a call by redialling
2. Select the desired devices, then press
[Delete] > [Yes].
•• [Mark all]: Marks all items.
•• [Unmark all]: Unmarks all items.
50
Press and hold [ ] on the phone screen or [
on the steering wheel remote control.
Note
Redialling is not possible when there is no
number in the dialled calls list.
Bluetooth® Wireless Technology
Answering/Rejecting a call
1. If there is an incoming call, a pop-up
message will appear.
As shown below, the call is switched to the
mobile phone.
Using the menu during a
phone call
When making a call, you can use the following
menu items.
2. Press [Accept] in the pop-up message or
[ ] on the steering wheel remote control.
To reject a call, select [Reject] in the
pop-up message or [ ] on the steering
wheel remote control.
Notes
•• If the Call-ID service is available, the caller’s
phone number is displayed.
•• If caller’s phone number is saved in the phone
book, the caller’s name is displayed on the unit.
•• Upon receiving a call, the [Reject] function
may not be supported in some mobile phones.
Switching call to the mobile
phone
1. If you want to switch the call to the mobile
phone while talking on the car hands-free,
press [Use private] on the screen or press
and hold [ ] on the steering wheel remote
control.
2. If you want to switch the call to the car
hands-free while talking on the mobile
phone, press [Use hands-free] on the screen
or press and hold [ ] on the steering wheel
remote control.
The call is switched to the car hands-free.
Ending a call
1. To end a call, press [ ] on the phone
screen or [ ] on the steering wheel
remote control.
2. The call is ended.
51
Position
Description
Switches a voice call from the
car hands-free to the mobile
phone.
Ends a call.
Moves to a screen for
entering ARS numbers.
Displays the Mic volume
settings. You can adjust the
in-call volume that the other
party hears.
Displays the contacts list.
Bluetooth® Wireless Technology
Calling list
Making a call from calling list
1. Press [
] on the phone screen.
2.	Press [All], [Dialled], [Received], or
[Missed].
•• [All]: Displays all calling list.
•• [Dialled]: Displays the outgoing calling list.
•• [Received]: Displays the incoming calling
list.
•• [Missed]: Displays the missed calling list.
3.	Press the entry you want to call.
Downloading call history
You can download the call history information
from your mobile phone.
1. Press [ ] on the phone screen.
2. Press [Menu] > [Download] > [Yes].
Notes
•• Up to 50 received, dialled, and missed call
history lists can be downloaded.
•• The download feature may not be supported
in some mobile phones. Check to see that
the Bluetooth device supports the download
feature.
Note
The calling list may not be saved in some mobile
phones.
52
Contacts
Making a call from contacts
1. Press [ ] on the phone screen.
The contacts are displayed on the screen.
2.	Select the contact you want to call from the
list of contacts.
Bluetooth® Wireless Technology
Downloading mobile phone contacts
You can download contacts from your mobile
phone.
1. Press [ ] on the phone screen.
2. Press [Menu] > [Download] > [Yes].
Searching by name or number
You can search contacts for the name or number
that you enter.
1. Press [ ] > [Menu] > [Search] on the
phone screen.
Favourites
Calling favourites
If the phone number has already been stored in
the favourites, it can be easily called by tapping
on it.
First of all, add the phone number in the
favourites. Refer to the “Adding as a favourite”
on page 54.
1. Press [
Notes
•• Upon downloading mobile phone contacts, the
previous data is deleted.
] on the phone screen.
2. Enter the name or number, then press [OK].
3. Select the contact you want to call.
•• This feature may not be supported in some
mobile phones.

2.	Select the desired favourite.
53
Bluetooth® Wireless Technology
Adding as a favourite
Up to 10 contacts can be added to favourites
menu.
1. Press [
screen.
] > [Add new] on the phone
Note
If the phone numbers have already been stored
in the favourites, you can add or delete them by
pressing [Menu] > [Edit].
Deleting favourites
1. Press [
] on the phone screen.
2. Press [Menu] > [Delete items].
2.	Select one of the contacts.
3. Select the desired item, then press [Delete] >
[Yes].
•• [Mark all]: Marks all items.
•• [Unmark all]: Unmarks all items.
3. Press [
] > [Close] > [
].
54
Phone settings
This menu describes phone settings.
1. Press [
] on the phone screen.
2. For details, refer to the “Bluetooth” on page
57.
Settings
[Settings] menu overview
[Settings] menu
Sound
Display
Bluetooth
Sound
This menu is used to adjust the sound effects for
the whole system. (It may vary depending on the
type of vehicle.)
1. Press [SETUP] > [Sound].
Phone projection
Custom button
--[Navigation prioritised]: Lowering of all
other audio volumes during playback of
navigation prompts.
Date/Time
Language
Screensaver
Advanced
System info
•• [Equaliser]: This menu allows you to set
the Bass [BASS]/Middle [MID]/Treble
[TREBLE].
--Press [-]/[+] to control bass/middle/
treble settings.
--Drag the slide bar to control bass/
middle/treble settings.
--Press [Centre] to initialize the settings.
•• [Volume ratio]:
2. Select the desired items.
•• [Position]: This menu allows you to set
the sound position. For example, you can
set the sound close to the driver-seat so
that the volume is relatively lower in the
passenger or rear seats.
--Press [ ]/[ ]/[ ]/[ ] to control
the sound positioning.
--Drag and drop the dot to a desired place
to adjust the sound position.
--Press [ ] to concentrate the sound in
the centre of the vehicle.
55
--[Reverse warning priority]: Lowering of
audio volumes when the shift lever is set
to reverse.
--[Volume limitation on startup]: If the
audio volume is exceeding the defined
maximum upon vehicle start, it is lowered
accordingly.
•• [Advanced]: This menu allows you to
control automatically the audio volume
according to eh speed of the vehicle.
Press [SDVC].
•• [Default]: Resets the sound settings to
factory default.
•• [Beep]: This menu allows you to play a
beep sound whenever you operate the
touch screen. Press [Beep].
Settings
Display
This menu is used to change the display
environment settings.
1. Press [SETUP] > [Display].
•• [Brightness]:
--Press [-]/[+] to set display brightness
for daylight or night mode.
--Drag the slide bar to control the display
brightness settings.
--Press [Centre] to initialize the settings.
•• [Adjust]: This menu can be set in video
mode.
--Press [-]/[+] to control [Brightness]/
[Contrast]/[Saturation] settings.
--Drag the slide bar to control [Brightness]
/[Contrast]/[Saturation] settings.
2. Select the desired items.
•• [Dimming]: Sets the display brightness
according to mode changes.
--[Auto-illumination]: Adjusts the
brightness automatically according to
surrounding brightness.
--[Daylight]: Always keeps the brightness
high regardless of surrounding brightness.
--[Night]: Always keeps the brightness low
regardless of surrounding brightness.
--Press [Centre] to initialize the settings.
•• [Ratio]: Sets the display ratio according to
mode changes.
--[Normal]: Adjusts the screen to 4:3.
--[Full]: Adjusts the screen to full screen
display.
--[Wide]: Adjusts the screen to 16:9.
•• [Default]: Resets the display settings to
factory default.
•• [Display Off]: Press [Display Off] to turn
the screen off. Press the screen itself
again to turn the screen on.
56
Settings
Bluetooth
This menu describes Bluetooth phone settings.
Bluetooth connections
This menu is used to pair and connect the head
unit and a Bluetooth phone.
D [Add new]: Registers a new Bluetooth
device.
E [Delete devices]: Moves to "Delete devices".
F [Help]: Switches to the Bluetooth connection
help screen.
Press [SETUP] > [Bluetooth] > [Bluetooth
connections].
Auto connection priority
If auto connection priority is turned on,
a Bluetooth device will automatically be
connected according to the option setting when
the car ignition is turned on.
1. Press [SETUP] > [Bluetooth] > [Auto
connection priority].
BC
2. Select the desired items.
A Paired device list: Displays the paired
Bluetooth device list. When selecting from
the list, the device is either connected or
disconnected.
Note
If there is no phone selected, the previously
connected phone will be automatically connected.
If there are no previously connected phones, the
system will try to connect to devices in the list in
order.
B Bluetooth audio connection status: An icon
appears when you make a Bluetooth audio
connection.
C Bluetooth hands-free connection status: An
icon appears when you make a Bluetooth
hands-free connection.
57
Settings
System Bluetooth info
Passkey
Vehicle name
You can change the passkey used for Bluetooth
device authentication.
You can change the Bluetooth device name of
the vehicle.
1. Press [SETUP] > [Bluetooth] > [System
Bluetooth info] > [Vehicle name].
1. Press [SETUP] > [Bluetooth] > [System
Bluetooth info] > [Passkey].
Phone projection
This menu describes phone projection settings.
1. Press [SETUP] > [Phone projection].
2. Press the desired items.
2. Enter the passkey using the keypad.
2. Enter the desired name using the keypad,
then press [OK].
Note
The default vehicle name is set to HYUNDAI
MOTORS.
Note
The passkey is a 4-digit authentication code used
for a Bluetooth connection between the mobile
phone and car system. The default passkey is set
to 0000.
Default
This menu is used to reset the Bluetooth settings
to factory default.
Press [SETUP] > [Bluetooth] > [Default] > [Yes].
58
•• [Android Auto]: If Android Auto is checked,
you can use the functions of your Android
device with a USB cable connected.
•• [Apple CarPlay]: If Apple CarPlay is
checked, you can use the functions of your
iPhone with a USB cable connected.
Settings
Custom button
Date/Time
Language
You can assign a function to custom button.
This menu describes date and clock settings.
1. Press [SETUP] > [Custom button].
1. Press [SETUP] > [Date/Time].
This menu is used to set the language of the
system.
2. Select the desired function.
2. Select the desired items.
•• [GPS time]: Displays time according to the
received GNSS (Global Navigation Satellite
System) time.
•• [24-hour]: Switches to 12 hour or 24 hour.
•• [Daylight savings time]: Turns the daylight
savings time on or off. When daylight
savings time is turned on, the clock is
moved forward one hour.
59
1. Press [SETUP] > [Language].
2. Select the desired language.
Settings
Screensaver
Advanced
This menu is used to select the screen displayed
when the screen or power is turned off.
This menu describes advanced settings.
1. Press [SETUP] > [Screensaver].
System info
1. Press [SETUP] > [Advanced].
Version info
You can view software version and firmware
version.
Press [SETUP] > [System info] > [Version info].
2. Select the desired item.
•• [Digital]: The digital clock and date is
displayed.
•• [Analogue]: The analogue clock and date is
displayed.
•
• [None]: Nothing is displayed.
2. Select the desired items.
•• [Media change notifications]: If the box is
checked, the notification pop-up for media
information will be shown on the top of the
screen, whenever a content changes.
•• [Steering whl mode button]: Selects the
desired feature when you press [
(MODE)] on the steering wheel to toggle
media modes.
60
Settings
Update
For system’s software security, new function
addition, and map update, you need an update.
1. Press [SETUP] > [System info] > [Version
info].
Notes
•• This product requires regular updates for
software corrections, new functions and map
updates. Updating may require up to 1 hour
depending on the data size.
•• Turning off the power or ejecting the SD card
during the update process may result in data
loss.
•• Please use only the SD card that was included
with the vehicle purchase.
•• The use of a separately purchased SD card
may result in damage due to heat related
deformation.
2. Insert the SD card with latest file downloaded
into the SD card slot.
3. Press [Update] > [OK].
Once updating is completed, the system will
automatically restart.
•• Product malfunctions caused by the use of
separately purchased SD cards shall not be
covered within the product warranty.
•• Repeatedly connecting/disconnecting the
SD card in a short period of time may cause
damage to the device.
61
Default
This menu is used to reset all settings specified
by the user.
1. Press [SETUP] > [System info] > [Default].
2. Press [Default] > [Yes].
Note
This [Default] menu cannot be operated if any
USB device, iPod or Android Auto/Apple CarPlay
device has been connected to the system.
Using rear camera
About rear camera
Rear camera is parking guide system, when the
ignition switch is on and a car start-up with
being in R position of a transmission lever.
Notes
•• Rear camera has an optical lens to secure
wide view, so there is a little difference in the
distance shown on the screen. For safety, make
sure to check the rear, left, and right view by
yourself.
•• The colour of the parking guide line on the
screen may differ from reality.
Note
When driving backwards, it displays drive and
neutral steering path.
Line
Instruction
A Red line
About 0.5 m from the
vehicle rear bumper
B Yellow line 1
About 1 m from the vehicle
rear bumper
C Yellow line 2
About 3 m from the vehicle
rear bumper
D Yellow line 3
Vehicle path of the left
side wheel in the vehicle’s
front passenger seat side
E Yellow line 4
Vehicle path of the right
side wheel in the vehicle’s
front passenger seat side
F Blue line
Steering neutral path
62
Before thinking there is a product defect
The current car position as shown on
the navigation may differ from the
actual position under the following
conditions.
•• When driving on Y-shaped roads with narrow
angles the current position may be displayed in
the opposite direction.
•• Within city streets, the current position may be
displayed on the opposite side or on an offroad position.
•
• When changing the zoom level from maximum
to a different level, the current position may be
displayed on a different road.
•• If the vehicle is loaded onto a ferry or a car
transport vehicle, the current position may be
stalled on the last position prior to loading.
•• When entering a road after passing an
underground parking structure, building parking
structure, or roads with many rotations.
•
• When driving in heavy traffic with frequent
starts and stops.
•
• When driving under slippery conditions, such as
heavy sand, snow, etc..
•• When the tires have recently been replaced
(Especially upon use of spare or studless tires).
•• When using tires of improper size.
•• When the tire pressure for the 4 tires are
different.
•• When the replacement tire is worn or used
(Especially studless tires having passed a
second season).
•• When driving near high-rise buildings.
•• When a roof carrier has been installed.
•• When a long distance route is calculated
while driving on an expressway, in such cases,
continued driving will automatically enable
the system to conduct map matching or use
updated GNSS information to provide the
current position (In such cases, up to several
minutes may be required).
•• A route guidance signaling for a U-turn may
occur in some no U-turn intersections.
Correct route guidance may not occur
due to search conditions or driving
position. The following occurrences are
not malfunctions:
•• Guidance to go straight may be given while
driving on a straight road.
These situations may occur after
conducting route calculation. The
following occurrences are not
malfunctions:
•• Guidance may be given to a position differing
from the current position when turning at an
intersection.
•• Guidance may not be given even when turning
onto an intersection.
•• There are certain intersections in which
guidance may not occur.
63
•• Route guidance signaling entrance into a noentry zone may occur (no-entry zone, road
under construction, etc.).
•• Guidance may be given to a position that is
not the actual destination if roads to reach
the actual destination do not exist or are too
narrow.
•• Faulty voice guidance may be given if the
vehicle breaks away from the designated
route. (e.g. if a turn is made at an intersection
while the navigation provided guidance to go
straight.)
•• When driving in high speeds, route recalculation
may take a longer period of time.
Before thinking there is a product defect
1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions listed below.
3. If the problems persist, contact your authorised Hyundai dealer.
Problem
Possible Cause
There are small red, blue, or green dots
on the screen
Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency
may occur within 0.01% of total pixels.
The sound or image is not working
•• Has the switch for the vehicle been turned to [ACC] or [ON]?
•• Has the system been turned off?
The screen is being displayed but sound
is not working
•• Has the volume been set to a low level?
•• Has the volume been muted?
When the power is turned on, the corners •• The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a
malfunction.
of the screen are dark
•• If the screen is very dark, contact your nearest authorised Hyundai dealer for assistance.
Sound is working from only one speaker
Are the positions of fader or balance sound controls adjusted to only one side?
Sound does not work in AUX mode
Are the audio connector jacks fully inserted into the AUX terminal?
The external device is not working
Is the external device connected with a standard connector cable?
When turning power on, the most recent
mode screen is not displayed
Within modes that play files by reading external sources, such as USB, iPod, or Bluetooth® streaming mode, the
most recently played mode screen prior to turning off power may not properly load.
•• If the corresponding device is not connected, the mode operated prior to the most recent mode will operate.
•• If the previous mode still cannot be properly played, the mode operated prior to that will operate.
64
Troubleshooting
Problem
Possible Cause
Countermeasure
The fuse is disconnected.
•• Replace with a suitable fuse.
•• If the fuse is disconnected again, please contact your authorised Hyundai dealer.
Device is not properly connected.
Check to see that the device has been properly connected.
The system does not
play.
The vehicle battery is low.
Charge the battery if the problem persists, contact your authorised Hyundai dealer.
The image colour/
tone quality is low.
The brightness, saturation, and contrast
levels are not set properly.
Properly adjust the brightness, saturation, and contrast levels through display setup.
Sound does not
work.
The volume level is set to the lowest level. Adjust the volume level.
The power does not
turn on.
The connection is not proper.
Check to see that the device has been properly connected.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow
mode.
The sound will not work when the device is fast-forwarding, rewinding, scanning, or
playing in slow mode.
65
Troubleshooting
Problem
The sound or image
quality is low.
The USB does not
work.
The iPod is not
recognised even
though it has been
connected.
Possible Cause
Countermeasure
Vibration is occurring from where the conversion The sound may be short circuited and the image distorted if the device vibrates.
switch has been installed.
Image colour/tone quality is low.
The device will return to normal once vibrations stop.
USB memory is damaged.
Please use after formatting the USB into FAT 16/32, exFAT or NTFS format.
USB memory has been contaminated.
Remove any foreign substances on the contact surface of the USB memory and
multimedia terminal.
A separately purchased USB hub is being used.
Directly connect the USB memory with the multimedia terminal on the vehicle.
A USB extension cable is being used.
Directly connect the USB memory with the multimedia terminal on the vehicle.
A USB which is not a metal cover type USB
memory is being used.
Use standard USB memory.
An HDD type, CF, SD memory is being used.
Use standard USB memory.
There are no music files which can be played.
Only MP3, WMA, OGG, FLAC and WAV file formats are supported. Please use
only the supported music file formats.
There are no titles which can be played.
Use iTunes to download and save MP3 files into the iPod.
The iPod firmware version has not been properly Use iTunes to update the firmware version and reconnect the iPod with the
updated.
device.
The iPod device does not recognise downloads.
Reset the iPod and reconnect with the device.
66
Trademarks and licenses
Bluetooth® Wireless Technology
DivX®
The Bluetooth Wireless Technology word mark
and logos are registered trademarks owned by
Bluetooth Wireless Technology SIG, Inc.
This DivX Certified® device can play DivX® HD
video files (including .avi, .divx).
iPod®
iPod® is a registered trademark of Apple Inc.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
Download free software at www.divx.com to
create, play and stream digital videos.
DivX®, DivX Certified® and associated logos
are trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S.
patents: 8,731,369; RE45,052.
In addition to the source code, all referred
license terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the
cost of media, shipping and handling) upon email
request to opensource@lge.com. This offer is
valid for three (3) years from the date on which
you purchased the product.
67
Specification
Common
Power supply
DC 12 V
AM
Operating power
DC 9 V ~ DC 16 V
Tuning range
Current consumption
Maximum 5 A
Usable sensitivity
35 dBuV
Dark current
Maximum 0.5 mA
Signal-to-noise ratio
Minimum 45 dB
Storage temperature
-30 °C ~ +75 °C
Dimensions
(Head unit)
317.55 mm (W) Χ 177.13 mm
(H) Χ 208.08 mm (D)
Weight (Head unit)
2.04 kg
Supported profile
HFP 1.6, A2DP 1.2,
AVRCP 1.5, PBAP 1.1
Supported Bluetooth
Bluetooth
Radio
Operating temperature -20 °C ~ +65 °C
specification
2402 MHz ~ 2480 MHz
Output Power (Class2)
Maximum 4.0 dBm
Number of channels
79
FM
Tuning range
87.50 MHz ~ 108.00 MHz
Usable sensitivity
10 dBuV
Signal-to-noise ratio
Minimum 50 dB
203.2 mm (8 inches)
TFT-LCD
3.0
Frequency range
522 kHz ~ 1620 kHz
Screen size
176.4 (W) x 99.36 (H) mm
(Active area)
Resolution
384,000 pixel
Operating method
TFT (Thin Film Transistor)
Viewing angle
R/L/U/D 89 (Typ)
Internal lighting
LED
•• Designs and specifications are subject to change without prior notice.
68
LIMITED WARRANTY  
ORIGINAL NAVIGATION HEAD UNIT SUPPLIED BY VEHICLE DEALER
Product :
Product No. :
WHAT THIS WARRANTY COVERS
1. V
 ehicle Dealer Shop (“Dealer”) warrants to you that the Hardware will be free from defects in workmanship and materials under Normal use (“Defects”)
from the original date of the registration of the motor vehicle (“Warranty Period”). During the Warranty Period the Hardware will be repaired or replaced
at DEALER’s choice (“Limited Warranty”) without charge to you for either parts or labor. This Limited Warranty covers the replacement of the head unit
including of the Hardware only.
WHAT THIS WARRANTY DOES NOT COVER
2. The
 Limited Warranty does not apply to normal wear and tear, does not apply when the Hardware is opened or repaired by someone not authorized by
DEALER and does not cover repair or replacement of any Hardware or part thereof damaged by: misuse, moisture liquids, proximity or exposure to heat
and accident, abuse, non-compliance with the instructions supplied with the Hardware, neglect or misapplication. The Limited Warranty does not cover
physical damage to the surface of the Hardware. This Limited Warranty does not cover any software that may accompany or be installed on the Hardware.
The Limited Warranty does not cover the installation, removal or maintenance of the Hardware or any costs related herewith.
HOW TO MAKE A WARRANTY CLAIM
3. In
 order to make a claim of a Defect, you must contact DEALER. If a defect arises and a valid claim under this Limited Warranty is received by DEALER
after the first 3yr/100,000km of the Warranty Period, DEALER is entitled to charge you for any reasonable shipping and handling costs made in connection
with the repair or replacement of the Hardware. You must comply with any other return procedures stipulated by DEALER, if any.
69
DEALER LIMITED WARRANTY
YOUR LEGAL RIGHTS
4. S ome countries may not allow the exclusion or limitation of damages. If any part of this Limited Warranty is held to be invalid or unenforceable, the
remainder of the Limited Warranty shall nonetheless remain in full force and effect.
5. T his Limited Warranty is the only express warranty made to you and is provided in place of any other express warranties or similar obligations (if any)
created by any advertising, documentation, packaging, or other communications.
6. E xcept for the Limited Warranty and to the maximum extent permitted by applicable law, DEALER and its suppliers provide the Hardware “AS IS AND WITH
ALL FAULTS”, and hereby disclaim all other warranties and conditions, whether express, implied or statutory, including, but not limited to, any (if any)
implied warranties, duties or conditions of satisfactory quality, of fitness for a particular purpose, of reliability or availability, of accuracy or completeness
of responses, of results, of workmanlike effort, of lack of viruses, and of reasonable care and skill, all with regard to the Hardware, and the provision of
or failure to provide support or other services, information, software, and related content through the Hardware or otherwise arising out of the use of the
Hardware. Also, there is no warranty or condition of quiet enjoyment, quiet possession, or non-infringement with regard to the Hardware.
7. This Limited Warranty does not affect any legal rights under applicable national legislation governing the sale of consumer goods.
8. This Limited Warranty cannot be transferred to any other person.
LIMITATION OF LIABILITY
9. N
 either DEALER nor its suppliers shall be liable to you or to any third party for any damages either direct, indirect, incidental, consequential or otherwise
(including in each case, but not limited to, damages for the inability to use the equipment or access data, loss of data, loss of business, loss of profits,
business interruption or the like) arising out of the use of or inability to use the Hardware even if DEALER has been advised of the possibility of such
damages.
10. Notwithstanding any damages that you might incur for any reason whatsoever, the entire liability of DEALER and any of its suppliers shall be limited to the
amount actually paid by you for the Hardware.
11. DEALER shall not be liable for
(I) any fraud on the part of its employees and/or agents; or
(I) any fraudulent misrepresentation on the part of its employees and/or agents.
12. Notwithstanding the above, neither party’s liability for death or personal injury resulting from its own negligence shall be limited.
70
FCC Warning
FCC approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device should be installed and operated with minimum 20 cm between the radiator and your body.
46
MME Auto Spare Parts Trading LCC
Dubai Business bay, aspect tower D, office 2804
E-MAIL:service@motrex.co.kr
P/N:MFLXXXXXXXX (O/M)
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:12:15 10:31:04+09:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2018:01:12 09:10:57+09:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2018:01:12 09:10:57+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:d5690d65-b162-4b19-8539-eb51e4c6bc9c
Original Document ID            : xmp.did:A30DADD2A3D5DF118A7AFA74DE93FB9B
Document ID                     : xmp.id:EDCE1C4937E1E71199EFB34062765131
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:ECCE1C4937E1E71199EFB34062765131
Derived From Document ID        : xmp.did:8A82143BF9DEE7118677A12625C5158A
Derived From Original Document ID: xmp.did:A30DADD2A3D5DF118A7AFA74DE93FB9B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:12:15 10:31:04+09:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 72
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BEJLNM1880NNTL

Navigation menu