LG Electronics USA LTGEN90L Cellular/ PCS CDMA Automotive Transceiver Module with Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1144466
Application ID	1yxf74WM44MV+RBBOwgaBw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.94kB (586695 bits)
Date Submitted	2009-07-24 00:00:00
Date Available	2010-01-20 00:00:00
Creation Date	2009-07-24 18:45:58
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-07-24 15:52:34
Document Title	2009072418450485941_Microsoft Word - Users Manual for LG Telematics_Gen90L.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	sjhan

LG Telematics
Test Manual
[Gen90L]
Version 1.0
2009.07.03
LG Telematics
Revision History
Author
Sangjin Han
Description
Merged document. Document start
Date
July 3,2009
LG Telematics
Contents
1. How to Place a Call
2. ATT Tool for TCU Setting
3. VCP Commander
FCC information
LG Telematics
1. How to Place a Call
Fig.9
LG Telematics
LG Telematics
2. ATT Tool for TCU Setting
1) Set COM Port
Fig 18
2) Check Connection Status
Fig.19
LG Telematics
3) NAD Screen
Fig.20
4) Select Forced band mode and apply it
Fig.21
LG Telematics
- Click to see the selectable menu for changing
- After select the Service mode, click “Control” to apply it.
Fig.22
5) Check result of change.
Fig.23
LG Telematics
3. VCP Commander
1) Run “VCP-Commander.exe”.
This tool is single executable file.
2) Connect the named “CAIT”-port to your PC’s
serial port.
3) Check the serial baud rate of VCP.
(Power-up default is 38400 bps)
4) Select your PC’s COM-port, Press “Connect”
button.
5) Test the right connection. Press “END”,
verify that “Status” is flipped (“Cmd FAIL” to
“Cmd OK”).
Fig.25
6) Select command from drop-down-list and enter “Value 1” or “Value 2” according to
each command.
7) Press “SET” button, then status is flipped.
8) Below table are command lists, value 1 and value 2.
“Command”
“Value 1”
“Value 2”
Description
PREF_AUTOMATIC
Don’t care
Don’t care
Set system selection mode
Don’t care
Don’t care
Set MOB_P_REV
PREF_CELL_ONLY
PREF_PCS_ONLY
PREF_CDMA_ONLY
PREF_ANALOG_ONLY
PREF_HOME_ONLY
PREF_P_REV_3
PREF_P_REV_4
PREF_P_REV_6
temporally
LG Telematics
A_KEY
See
See
example 1
example 1
PREF_FOR_RC
1~5
Don’t care
Set NV_PREF_FOR_RC_I
IMSI_MCC
3-digit
Don’t care
Set NV_IMSI_MCC_I
Don’t care
Set NV_IMSI_11_12_I
decimal
Set A-key value
ie.
“120”
IMSI_11_12
2-digit
decimal
ie,
(MNC)
“12”
SCM
One-byte
Don’t care
Set NV_SCM_I
Don’t care
Set
decimal
SLOT_SYCLE_INDEX
0~7
NV_SLOT_CYCLE_INDEX_I
MOB_TERM_HOME
0 or 1
Don’t care
Enable(1) or Disable(0)
MOB_TERM_FOR_SID
0 or 1
Don’t care
Enable(1) or Disable(0)
MOB_TERM_FOR_NID
0 or 1
Don’t care
Enable(1) or Disable(0)
Dial_SO2_LB,
Don’t care
Don’t care
Originate call with
Dial_SO3_EVRC,
specified SO. Dial number
Dial_SO9_LB13,
is fixed to “111” internally.
Dial_SO54,
Dial_SO55_LB,
Dial_SO32768,
Dial_SO32798,
Dial_SO32799,
CALL_ANSWER
Don’t care
Don’t care
Answer incoming call.
CALL_END
Don’t care
Don’t care
End call.
Power_Down
Don’t care
Don’t care
Force power-down
“Communication Module”
only.
After this command, must
do unplug then plug main
VCP power to power-up
Module.
Power_Recycle
Don’t care
Don’t care
Force power-recycle
“Communication Module”
only.
LG Telematics
FCC Information
FCC part 15.19
This device complies with Part 15 of the FCC Rules, Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Part 15.21 statement
Change or Modifications that are not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
RF Exposure
In order to comply with RF Exposure requirements the antenna or radiating element of
this device must be installed to ensure that it is at least 20cm from end users. The
antenna supplied with this device must not exceed a maximum gain of 9.74dBi in the
cellular band and 8.25dBi in the PCS band.
Installation
This unit should only be installed by qualified personnel by GMOnstar.
Address
P.O. Box 430627
Pontiac, MI 48343

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:07:24 15:52:34-04:00
Create Date                     : 2009:07:24 18:45:58+09:00
Metadata Date                   : 2009:07:24 15:52:34-04:00
Format                          : application/pdf
Title                           : 2009072418450485941_Microsoft Word - Users Manual for LG Telematics_Gen90L.doc
Creator                         : sjhan
Document ID                     : uuid:67f1bc6f-c15c-4806-8a27-444f2528f89f
Instance ID                     : uuid:2071c78a-906d-4798-b691-803d359c8c50
Page Count                      : 11
Author                          : sjhan

EXIF Metadata provided by EXIF.tools