LG Electronics USA WC1NP8 RF Module User Manual

LG Electronics USA RF Module Users Manual

Users Manual

SPECIFICATIONS PRODUCT NAME : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME : WC1NP8 Designed Checked Approved LG Innotek Co., Ltd. H.J. ROH D.S. OH S.D. CHOI DOCUMENT No. 17(개A)ER-005 2017.10.22 2017.10.27 2017.11.01 PAGE 25 (00)-0073 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 1 / 22 Index No Description Page 1 Features 2 2 Ordering Information 2 3 Label Marking 2 4 Block Diagram 3 5 Absolute Maximum Ratings 3 6 Operating Conditions 4 7 Standard Test Conditions 4 8 Electrical Specifications for Wi-Fi 5 9 Electrical Specifications for Bluetooth 11 10 Environment Tests 14 11 Pin Description 15 12 Test Method 16 13 Mechanical Characteristics 17 14 Outline Drawing 18 15 Insulation Parts List 19 16 Packing Information 20 17 LG CI Specification 22 18 Change History of Revision 25
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 2 / 22 2. Ordering InformationModel Description TWCM-E001D WC1NP8 802.11 a/b/g/n/ac + BT combo Module, Dual Band 2T2R MIMO 1. FeaturesWC1NP8 is the small size and low power module for IEEE 802.11ac wireless LAN & BT4.2 + HS. TWCM-E001D is based on QCA9379-7 solution.* Caution: This model don’t support AC ModeIEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructureBluetooth 4.2+ HS , BLESize : 68.0mm x 38.0 x 6.8 mmTwo stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.11ac)WLAN Metal Press antenna(Ready), BT Printed antenna onUse on-chip OTP (One-Time Programmable)Host Interface :-WLAN : USB2.0-BT : USB1.1Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKPApplication: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB3. Label marking①Customer P/N ④Product Lot No. : 1710A210101②MAC Address BAR Code -17 : Year - 21 : Date ③Model No - 10: Month - 01 : Manufactured Process - A : Revision No - 01 : Change History of Revision ⑤MAC Address No.① ② ③ EAT64113401 001EB2B00339 ④ ⑤ TWCM-E001D 1710A210101
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 3 / 22 5. Absolute Maximum Ratings Parameter Min Max Unit Storage Temperature -20 +80 ℃ Storage Humidity (40℃) - 90 % Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. 4. Block Diagram . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40℃ and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. < Table 1 > QCA9379 2.4GHz 5GHz 2.4GHz 5GHz 11ac 2T2R Baseband 32bit RISC CPU MAC / Packet buffer/ Security engine System Control DC Buck USB2.0 Interface USB I/F 12PIN CONNECTOR 3.45V Main Clock 40MHz Diplexer & Balun Matching ANT0 ANT1 2.4GHz BT Baseband Bluetooth MAC LPF BT ANT USB1.1 Interface Diplexer & Balun Matching 1.1V
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 4 / 22 6. Operating Conditions Parameter Min Typ Max Unit Ambient Temperature 0 - 60 ℃ Ambient Humidity (40℃) - - 85 % Supply Voltage 3.35 3.45 3.6 Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. Temperature 25 ± 5℃ Humidity 65 ± 5% Input power Supply Voltage VDD_3.3V 3.35 ~ 3.6V 7-1. Ambient condition 7-2. Power supply voltages 7-3. Current consumption (2X2 Continuous Power) Human Body Model (HBM) Min. Max. Unit Contact - ±2 kV Air - ±10 7-4. ESD Information Note 1 : IEC 61000-4-2 (150pF, 330R) ※ Test condition : After 8-pin USB Cable connect to module, progress ESD test. Current Consumption Min. Typ. Max. Unit TX Mode ( CCK 1M @ 17dBm) - 1A mA Note 1 : This figure is the RMS(root mean square) Value.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 5 / 22 8. Electrical Specifications for Wi-Fi ( Radiation Test ) 8-1. RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11b Mode DSSS/CCK Channel frequency 2400 ~ 2483.5 MHz Data rate 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ. Max. Unit Power Level 2) 14 17 20 dBm Spectrum Mask 1st side lobes ( to fc ±11MHz) - -43 -30 dBr 2nd side lobes ( to fc ±22MHz) - -58 -50 dBr Modulation Accuracy (EVM) - 30 35 % Power On/Off ramp - 0.5 2.1 Usec Freq. Tolerance -20 - 20 ppm Chip Clock Freq. Tolerance -20 - 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (FER ≤ 8%) -88 -82 dBm Maximum Input Level (FER ≤ 8%) -10 - - dBm * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 6 / 22 8-2. RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11g Mode OFDM Channel frequency 2400 ~ 2472 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit Power Level 12 15 18 dBm Spectrum Mask at fc ±11MHz - -32 -20 dBr at fc ±20MHz - -43 -28 dBr at fc ≥ ± 30MHz - -48 -40 dBr Constellation Error (EVM) - -32 -25 dB Freq. Tolerance -20 - 20 ppm Chip Clock Freq. Tolerance -20 - 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (PER ≤ 10%) - -74 -67 dBm Maximum Input Level (PER ≤ 10%) -20 - - dBm * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 7 / 22 8-3. RF Characteristics for IEEE802.11a ( 54Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11a Mode OFDM Channel frequency 5150~5850 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit Power Level 2) 10 13 16 dBm Spectrum Mask at fc ±11MHz - -32 -20 dBr at fc ±20MHz - -43 -28 dBr at fc ≥ ± 30MHz - -48 -40 dBr Constellation Error (EVM) - -32 -25 dB Freq. Tolerance -20 - 20 ppm Chip Clock Freq. Tolerance -20 - 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (PER ≤ 10%) - -73 -67 dBm Maximum Input Level (PER ≤ 10%) -30 - - dBm * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 8 / 22 8-4. RF Characteristics for IEEE802.11gn ( MCS7 mode unless otherwise specified) Items Contents Specification IEEE802.11n – 2.4GHz Mode OFDM Channel frequency 2400 ~ 2483.5 MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit Power Level (HT20:MCS7) 12 15 18 dBm Spectrum Mask (HT20) at fc ±11MHz - -32 -20 dBr at fc ±20MHz - -35 -28 dBr at fc ±30MHz - -45 -40 dBr Constellation Error (EVM) - -32 -28 dB Freq. Tolerance -20 - 20 ppm Chip Clock Freq. Tolerance -20 - 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (HT20,PER ≤ 10%) - -73 -66 dBm Maximum Input Level (PER ≤ 10%) -20 - - dBm * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 9 / 22 8-5. RF Characteristics for IEEE802.11an ( MCS7 mode unless otherwise specified) Items Contents Specification IEEE802.11n – 5GHz Mode OFDM Channel frequency 5150~5850 MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit Power Level (HT20/HT40:MCS7) 10 13 16 dBm Spectrum Mask (HT20) at fc ±11MHz - -32 -20 dBr at fc ±20MHz - -35 -28 dBr at fc ±30MHz - -45 -40 dBr Constellation Error (EVM) - -32 -28 dB Freq. Tolerance -20 - 20 ppm Chip Clock Freq. Tolerance -20 - 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (HT20,PER ≤ 10%) - -70 -64 dBm Minimum Input Level Sens. (HT40,PER ≤ 10%) - -67 -62 dBm Maximum Input Level (PER ≤ 10%) -30 - - dBm * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 10 / 22 Items Contents 8-4. RF Characteristics for IEEE802.11ac ( MCS8/9 mode unless otherwise specified) Note 1: This varies by regulatory domain Refer to the product documentation for specific details for each regulatory domain Note 2: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Don’t support This Model
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 11 / 22 9. Electrical Specifications for Bluetooth ( Conducted Test ) Parameter (Condition) Min. Typ. Max. Unit Transmit Power (PGPSK) 6 11 15 dBm Power Density - - 20 dBm Frequency Range 2400 - 2483.5 MHz 20dB Bandwidth - - 1000 kHz In-band Spurious Emissions ± 500kHz - - -20 dBc |M-N| = 2MHz - - -20 dBm |M-N| ≥ 3MHz - - -40 dBm Modulation Characteristics, frequency Deviation ΔF1avg (00001111 sequence in payload) 140 155 175 kHz ΔF2max (10101010 sequence in payload) 115 - - kHz ΔF1avg / ΔF2max 80 90 - % Initial Carrier Frequency Tolerance -75 - 75 kHz Carrier Frequency Drift DH1 Packet -25 - 25 kHz DH3 Packet -25 - 25 kHz DH5 Packet -40 - 40 kHz Drift rate -20 - 20 kHz / μs * Normal Condition : 25℃, VDD=3.5V. 9-1. Transmitter Performance * Supported bluetooth tx power class 1.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 12 / 22 Parameter (Condition) Min. Typ. Max. Unit EDR Relative Transmit Power -4 - 1 dB EDR Carrier Frequency Stability ωi (2-DH5 and 3-DH5) -75 - 75 kHz ω0 (2-DH5 and 3-DH5) -10 - 10 kHz ωi + ω0 (2-DH5 and 3-DH5) -75 - 75 kHz EDR Modulation Accuracy RMS DEVM 2-DH5 - 6 20 % 3-DH5 - 6 13 % 99% DEVM DEVM < 0.30, π/4-DQPSK DEVM < 0.20, 8DPSK symbols 2-DH5 99 - - % 3-DH5 99 - - % Peak DEVM 2-DH5 - 13 35 % 3-DH5 - 13 25 % EDR Differential Phase Encoding (packet with 0 error > 99%) 99 - - % EDR In-band Spurious Emissions |M-N| = 1MHz - - Ptx_ref-26 dBm |M-N| = 2MHz - - -20 dBm |M-N| = 3MHz - - -40 dBm Enhanced Power Control - - 4 dBm 9-2. Transmitter Performance 9-3. BLE RF Performance Parameter (Condition) Min. Typ. Max. Unit Tx Power 0 4 8 dBm Rx sensitivity (GFSK, BER, 1 Mbps) - -90 -80 dBm Mod Char : delta F1 average 225 255 275 kHz Mod Char : delta F2 max 99.9 - - % Mod Char : ratio 80 95 - %
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 13 / 22 9-4. Receiver Performance * Normal Condition : 25℃, VDD=3.3V. Parameter (Condition) Min. Typ. Max. Unit Rx sensitivity GPSK, 0.1% BER, 1Mbps - -85 -70 dBm π/4-DQPSK, 0.01% BER, 2Mbps - -80 -70 dBm 8-DPSK, 0.01% BER, 3Mbps - -80 -70 dBm C/I performance C/I co-channel (GFSK, 0.1%BER) - - 11 dB C/I 1MHz (GFSK, 0.1%BER) - - 0 dB C/I 2MHz (GFSK, 0.1%BER) - - -30 dB C/I ≥3MHz (GFSK, 0.1%BER) - - -40 dB C/I image (GFSK, 0.1%BER) - - -9 dB C/I image± 1MHz (GFSK, 0.1%BER) - - -20 dB C/I co-channel (π/4-DQPSK, 0.1%BER) - - 13 dB C/I 1MHz (π/4-DQPSK, 0.1%BER) - - 0 dB C/I 2MHz (π/4-DQPSK, 0.1%BER) - - -30 dB C/I ≥3MHz (π/4-DQPSK, 0.1%BER) - - -40 dB C/I image (π/4-DQPSK, 0.1%BER) - - -7 dB C/I image±1MHz (π/4-DQPSK,0.1%BER) - - -20 dB C/I co-channel (8-DPSK, 0.1%BER) - - 21 dB C/I 1MHz (8-DPSK, 0.1%BER) - - 5 dB C/I 2MHz (8-DPSK, 0.1%BER) - - -25 dB C/I ≥3MHz (8-DPSK, 0.1%BER) - - -33 dB C/I image (8-DPSK, 0.1%BER) - - 0 dB C/I image±1MHz (8-DPSK, 0.1%BER) - - -13 dB Intermodulation(BER≤0.1%) Input = -64dBm, n=5 -39 - - dBm Out-of-band blocking (CW, BER≤0.1%) 30MHz ~ 2000MHz -10 - - dBm 2000MHz ~ 2399MHz -27 - - dBm 2498MHz ~ 3000MHz -27 - - dBm 3000MHz ~ 12.75GHz -10 - - dBm Maximum input (GFSK, 0.1% BER) -20 - - dBm
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 14 / 22 10. Environment Tests Item Test Conditions Specifications Heat Load Test Initial values are measured at standard test condition. Leave samples in 60℃±3℃ for 96±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard ± 5% •TX Power : ±4dB Max • Min Input Level : ±4dB Max Humidity Load Test Initial values are measured at standard test condition. Leave samples in 40℃±3℃, 90 ~ 95% RH for 96 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard + 5% Heat Test Initial values are measured at standard test condition. Leave samples in 70℃±2℃ for 96 ±5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Cold Test Initial values are measured at standard test condition. Leave samples in －20℃±2℃ for 96 ±5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Temperature Shock Take measurements in standard test condition. Temp. : -40℃ ~ +85℃ Duration : 30 min Ramp-up & Ramp-down for 5 min Cycle : 200cycle. Vibration Test Initial value measure at standard test condition. Sweep rate : 1 single sweep/ minute Amplitude : 1.5 mm Frequency : 10-55Hz Duration : 1 Hours per direction (X,Y,Z)
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 15 / 22 11. Pin Description Pin No. Pin Name I/O Pin Description 1 VCC I Power Supply 3.3V 2 USB_DN_WiFi I/O WiFi USB Communication signal USB D- 3 USB_DP_WiFi I/O WiFi USB Communication signal USB D+ 4 GND I Ground 5 WOWL I Wake On WLAN 6 VCC I Power Supply 3.3V 7 WLAN_EN I WiFI_RESET 8 GND I Ground 9 USB_DN_BT I/O BT USB Communication signal USB D- 10 USB_DP_BT I/O BT USB Communication signal USB D+ 11 GND I Ground 12 BT_EN I BT_RESET
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 16 / 22 12. Test method This is a conducted test method of WiFi RF performance. 1) Test Condition. Power Supply TESCOM Shield Box ( TC-5910DP) Attanuator Auto test Program LitePoint IQxel Cable Power 5V RF Cable LAN Cable 2) Test Set-up List. - Instrument : LitePoint IQxel - Shield Box : Tescom TC-5910DP - RF Cable : TESCOM 4011-0011 - Attenuator : Mini-Circuit 15542 10dB attenuator - USB Cable, LAN Cable, Murata RF Cable : MXHT83QE3000 or MXHS83QE3000 - Power Supply 3) Test Flow - Install the test set-up. - Power OFF. - Open the Shield box and install the DUT for test. - Close the shield box. - Power ON. - Check the driver icon. - Start testing. #. Notes. - Be careful that you can consider a RF cable LOSS.
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 17 / 22 13. Mechanical Characteristics 1) Outline view Item Test Conditions Assembly No defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight 8 g
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 18 / 22 14. Outline Drawing Jangeun YangHojin RohYeongtaek Kang'17. 09 13'17. 09 13'17. 09 13
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 19 / 22 15. Packing Information
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 20 / 22
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 21 / 22 16.LG CI Specification.Logo Ratio – 1 : 0.65 Logo Type Color -- Black ■LG CI regulation■LG CI print in Carton box■Planar figure of Carton box
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 21 / 22 FCC and ISED Statements■FCC Part 15.19This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.FCC Part 15.105This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.OEM Responsibilities to comply with FCC and Industry Canada RegulationsThe module has been certified for integration into products only by OEM integrators under thefollowing condition:- The antenna(s) must be installed such that a minimum separation distance of at least 20 cm ismaintained between the radiator (antenna) and all persons at all times.- The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.As long as the two condition above is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).End Product LabelingThe module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and ISEDCertification Number are not visible when the module is installed inside another device, then theoutside of the device into which the module is installed must also display a label referring to theenclosed module. In that case, the final end product must be labeled in a visible area with thefollowing:“Contains FCC ID: BEJ-WC1NP8“Contains ISED ID: 2703H- WC1NP8”
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 21 / 22 RSS-GEN, Sec. 7.1.3 – (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux C NR d’Industrie Canada applicables aux appareils radioexempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimumof at least 20 cm between the radiation source (antenna) and any individual. This devicemay not be installed or used in conjunction with any other antenna or transmitter.l'exposition aux RF L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate thisequipment.Attention:Les changements ou modifications de cet appareil non expressément approuvé par le fabricantpeuvent annuler votre droit à utiliser cet équipement.Étiquetage du produit final (IC)Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro decertification IC. Si l’identification FCC et le numéro de certification IC ne sont pas visibles lorsquele module est installé à l’intérieur d’un autre dispositif, la partie externe du dispositif dans lequelle module est installé devra également présenter une étiquette faisant référence au module inclus.Dans ce cas, le produit final devra être étiqueté sur une zone visible avec les informationssuivantes :« Contient module émetteur identification FCC ID : BEJ-WC1NP8« Contient module émetteur ISED ID : 2703H-- WC1NP8”
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 21 / 22 CE Statements■ Hereby, LG Electronics Inc. declares that the radio equipment type RF Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc# The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be collocated or operating in conjunction with any other antenna or transmitter. The host manufacturer integrating this module should be assessed total compliance with all essential requirements regarding this radio module. The host manufacturer has the responsibility that the host device should be compliance with all essential requirement of RED.Contact AddressLG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
S P E C I F I C A T I O N PAGE : DOCUMENT No : REG. DATE : 2017.11.01 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 REV. DATE : 2017.11.16 REV.NO : 2.0 WC40134 Copyrightⓒ. 2016. All Rights Reserved. 22 / 22 Change History of Revision Revision Date Contents of Revision Change Remark 1.0 '17.11.01 First release H.J.Roh 2.0 '17.11.16 Remove 802.11AC specification(Customer request) H.J.Roh

Navigation menu