LG Electronics USA WC1NP8 RF Module User Manual
LG Electronics USA RF Module Users Manual
Users Manual
SPECIFICATIONS PRODUCT NAME : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME : WC1NP8 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved LG Innotek Co., Ltd. H.J. ROH 2017.10.22 D.S. OH 2017.10.27 S.D. CHOI 2017.11.01 DOCUMENT No. 17(개A)ER-005 PAGE 25 (00)-0073 DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 1 / 22 Index No Description Page Features Ordering Information Label Marking Block Diagram Absolute Maximum Ratings Operating Conditions Standard Test Conditions Electrical Specifications for Wi-Fi Electrical Specifications for Bluetooth 11 10 Environment Tests 14 11 Pin Description 15 12 Test Method 16 13 Mechanical Characteristics 17 14 Outline Drawing 18 15 Insulation Parts List 19 16 Packing Information 20 17 LG CI Specification 22 18 Change History of Revision 25 Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 2 / 22 1. Features WC1NP8 is the small size and low power module for IEEE 802.11ac wireless LAN & BT4.2 + HS. TWCM-E001D is based on QCA9379-7 solution. * Caution: This model don’t support AC Mode IEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructure Bluetooth 4.2+ HS , BLE Size : 68.0mm x 38.0 x 6.8 mm Two stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.11ac) WLAN Metal Press antenna(Ready), BT Printed antenna on Use on-chip OTP (One-Time Programmable) Host Interface : -WLAN : USB2.0 -BT : USB1.1 Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 2. Ordering Information Model Description TWCM-E001D WC1NP8 802.11 a/b/g/n/ac + BT combo Module, Dual Band 2T2R MIMO 3. Label marking ① ② ③ 1710A210101 ④ 001EB2B00339 ⑤ EAT64113401 TWCM-E001D ① Customer P/N ④ Product Lot No. : 1710A210101 ② MAC Address BAR Code -17 : Year - 21 : Date ③ Model No - 10: Month - 01 : Manufactured Process - A : Revision No - 01 : Change History of Revision ⑤ MAC Address No. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 3 / 22 4. Block Diagram QCA9379 ANT0 System 2.4GHz 32bit RISC CPU & Balun ANT1 Matching Diplexer BT ANT Control 5GHz 11ac 2T2R Baseband 2.4GHz & Balun Matching LPF USB I/F 12PIN CONNECTOR Diplexer MAC / USB2.0 Packet buffer/ Interface Security engine 5GHz USB1.1 2.4GHz BT Bluetooth Baseband MAC 40MHz Main Clock Interface 1.1V DC Buck 3.45V 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Min Max Unit Storage Temperature -20 +80 ℃ Storage Humidity (40℃) 90 < Table 1 > . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40℃ and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 4 / 22 6. Operating Conditions Parameter Min Typ Max Unit Ambient Temperature 60 ℃ Ambient Humidity (40℃) 85 Supply Voltage 3.35 3.45 3.6 Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition Temperature 25 ± 5℃ Humidity 65 ± 5% 7-2. Power supply voltages Input power Supply Voltage VDD_3.3V 3.35 ~ 3.6V 7-3. Current consumption (2X2 Continuous Power) Current Consumption TX Mode ( CCK 1M @ 17dBm) Min. Typ. 1A Max. Unit mA Note 1 : This figure is the RMS(root mean square) Value. 7-4. ESD Information Human Body Model (HBM) Min. Max. Contact ±2 Air ±10 Note 1 : IEC 61000-4-2 (150pF, 330R) ※ Test condition : After 8-pin USB Cable connect to module, progress ESD test. Copyrightⓒ. 2016. All Rights Reserved. Unit kV DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 5 / 22 8. Electrical Specifications for Wi-Fi ( Radiation Test ) 8-1. RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11b Mode DSSS/CCK Channel frequency 2400 ~ 2483.5 MHz Data rate 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ. Max. Unit 14 17 20 dBm 1st side lobes ( to fc ±11MHz) -43 -30 dBr 2nd side lobes ( to fc ±22MHz) -58 -50 dBr Modulation Accuracy (EVM) 30 35 Power On/Off ramp 0.5 2.1 Usec Freq. Tolerance -20 20 ppm Chip Clock Freq. Tolerance -20 20 ppm Min. Typ. Max. Unit -88 -82 dBm dBm Power Level 2) Spectrum Mask RX Characteristics Minimum Input Level Sens. (FER ≤ 8%) Maximum Input Level (FER ≤ 8%) -10 * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 6 / 22 8-2. RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11g Mode OFDM Channel frequency 2400 ~ 2472 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 12 15 18 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -43 -28 dBr at fc ≥ ± 30MHz -48 -40 dBr Constellation Error (EVM) -32 -25 dB Freq. Tolerance -20 20 ppm Chip Clock Freq. Tolerance -20 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (PER ≤ 10%) -74 -67 dBm -20 dBm Power Level Spectrum Mask Maximum Input Level (PER ≤ 10%) * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 7 / 22 8-3. RF Characteristics for IEEE802.11a ( 54Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11a Mode OFDM Channel frequency 5150~5850 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 10 13 16 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -43 -28 dBr at fc ≥ ± 30MHz -48 -40 dBr Constellation Error (EVM) -32 -25 dB Freq. Tolerance -20 20 ppm Chip Clock Freq. Tolerance -20 20 ppm RX Characteristics Min. Typ. Max. Unit Minimum Input Level Sens. (PER ≤ 10%) -73 -67 dBm -30 dBm Power Level 2) Spectrum Mask Maximum Input Level (PER ≤ 10%) * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 8 / 22 8-4. RF Characteristics for IEEE802.11gn ( MCS7 mode unless otherwise specified) Items Contents IEEE802.11n – 2.4GHz Specification Mode OFDM Channel frequency Data rate 2400 ~ 2483.5 MHz 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit 12 15 18 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -35 -28 dBr at fc ±30MHz -45 -40 dBr -32 -28 dB Freq. Tolerance -20 20 ppm Chip Clock Freq. Tolerance -20 20 ppm Min. Typ. Max. Unit -73 -66 dBm -20 dBm Power Level (HT20:MCS7) Spectrum Mask (HT20) Constellation Error (EVM) RX Characteristics Minimum Input Level Sens. (HT20,PER ≤ 10%) Maximum Input Level (PER ≤ 10%) * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 9 / 22 8-5. RF Characteristics for IEEE802.11an ( MCS7 mode unless otherwise specified) Items Contents IEEE802.11n – 5GHz Specification Mode OFDM Channel frequency Data rate 5150~5850 MHz 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps TX Characteristics Min. Typ. Max. Unit 10 13 16 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -35 -28 dBr at fc ±30MHz -45 -40 dBr -32 -28 dB Freq. Tolerance -20 20 ppm Chip Clock Freq. Tolerance -20 20 ppm Min. Typ. Max. Unit Minimum Input Level Sens. (HT20,PER ≤ 10%) -70 -64 dBm Minimum Input Level Sens. (HT40,PER ≤ 10%) -67 -62 dBm -30 dBm Power Level (HT20/HT40:MCS7) Spectrum Mask (HT20) Constellation Error (EVM) RX Characteristics Maximum Input Level (PER ≤ 10%) * Normal Condition : 25℃, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 10 / 22 8-4. RF Characteristics for IEEE802.11ac ( MCS8/9 mode unless otherwise specified) Items Contents Don’t support This Model Note 1: This varies by regulatory domain Refer to the product documentation for specific details for each regulatory domain Note 2: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 11 / 22 9. Electrical Specifications for Bluetooth ( Conducted Test ) 9-1. Transmitter Performance Parameter (Condition) Min. Typ. Max. Unit Transmit Power (PGPSK) 11 15 dBm Power Density 20 dBm 2400 2483.5 MHz 1000 kHz ± 500kHz -20 dBc |M-N| = 2MHz -20 dBm |M-N| ≥ 3MHz -40 dBm ΔF1avg (00001111 sequence in payload) 140 155 175 kHz ΔF2max (10101010 sequence in payload) 115 kHz ΔF1avg / ΔF2max 80 90 -75 75 kHz DH1 Packet -25 25 kHz DH3 Packet -25 25 kHz DH5 Packet -40 40 kHz Drift rate -20 20 kHz / μs Frequency Range 20dB Bandwidth In-band Spurious Emissions Modulation Characteristics, frequency Deviation Initial Carrier Frequency Tolerance Carrier Frequency Drift * Normal Condition : 25℃, VDD=3.5V. * Supported bluetooth tx power class 1. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 12 / 22 9-2. Transmitter Performance Parameter (Condition) Min. Typ. Max. Unit -4 dB ωi (2-DH5 and 3-DH5) -75 75 kHz ω0 (2-DH5 and 3-DH5) -10 10 kHz ωi + ω0 (2-DH5 and 3-DH5) -75 75 kHz 2-DH5 20 3-DH5 13 2-DH5 99 3-DH5 99 2-DH5 13 35 3-DH5 13 25 99 |M-N| = 1MHz Ptx_ref26 dBm |M-N| = 2MHz -20 dBm |M-N| = 3MHz -40 dBm dBm EDR Relative Transmit Power EDR Carrier Frequency Stability EDR Modulation Accuracy RMS DEVM 99% DEVM DEVM < 0.30, π/4-DQPSK DEVM < 0.20, 8DPSK symbols Peak DEVM EDR Differential Phase Encoding (packet with 0 error > 99%) EDR In-band Spurious Emissions Enhanced Power Control 9-3. BLE RF Performance Parameter (Condition) Min. Typ. Max. Unit Tx Power dBm Rx sensitivity (GFSK, BER, 1 Mbps) -90 -80 dBm Mod Char : delta F1 average 225 255 275 kHz Mod Char : delta F2 max 99.9 80 95 Mod Char : ratio Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 13 / 22 9-4. Receiver Performance Parameter (Condition) Min. Typ. Max. Unit GPSK, 0.1% BER, 1Mbps -85 -70 dBm π/4-DQPSK, 0.01% BER, 2Mbps -80 -70 dBm 8-DPSK, 0.01% BER, 3Mbps -80 -70 dBm C/I co-channel (GFSK, 0.1%BER) 11 dB C/I 1MHz (GFSK, 0.1%BER) dB C/I 2MHz (GFSK, 0.1%BER) -30 dB C/I ≥3MHz (GFSK, 0.1%BER) -40 dB C/I image (GFSK, 0.1%BER) -9 dB C/I image± 1MHz (GFSK, 0.1%BER) -20 dB C/I co-channel (π/4-DQPSK, 0.1%BER) 13 dB C/I 1MHz (π/4-DQPSK, 0.1%BER) dB C/I 2MHz (π/4-DQPSK, 0.1%BER) -30 dB C/I ≥3MHz (π/4-DQPSK, 0.1%BER) -40 dB C/I image (π/4-DQPSK, 0.1%BER) -7 dB C/I image±1MHz (π/4-DQPSK,0.1%BER) -20 dB C/I co-channel (8-DPSK, 0.1%BER) 21 dB C/I 1MHz (8-DPSK, 0.1%BER) dB C/I 2MHz (8-DPSK, 0.1%BER) -25 dB C/I ≥3MHz (8-DPSK, 0.1%BER) -33 dB C/I image (8-DPSK, 0.1%BER) dB C/I image±1MHz (8-DPSK, 0.1%BER) -13 dB -39 dBm 30MHz ~ 2000MHz -10 dBm 2000MHz ~ 2399MHz -27 dBm 2498MHz ~ 3000MHz -27 dBm 3000MHz ~ 12.75GHz -10 dBm Maximum input (GFSK, 0.1% BER) -20 dBm Rx sensitivity C/I performance Intermodulation(BER≤0.1%) Input = -64dBm, n=5 Out-of-band blocking (CW, BER≤0.1%) * Normal Condition : 25℃, VDD=3.3V. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 14 / 22 10. Environment Tests Item Test Conditions Specifications Initial values are measured at standard test condition. Heat Load Test Leave samples in 60℃±3℃ for 96±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard ± 5% Initial values are measured at standard test condition. Humidity Load Test Leave samples in 40℃±3℃, 90 ~ 95% RH for 96 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard + 5% Initial values are measured at standard test condition. Heat Test Leave samples in 70℃±2℃ for 96 ±5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Initial values are measured at standard test condition. Cold Test Leave samples in -20℃±2℃ for 96 ±5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Take measurements in standard test condition. Temperature Shock Temp. : -40℃ ~ +85℃ Duration : 30 min Ramp-up & Ramp-down for 5 min Cycle : 200cycle. Vibration Test Initial value measure at standard test condition. Sweep rate : 1 single sweep/ minute Amplitude : 1.5 mm Frequency : 10-55Hz Duration : 1 Hours per direction (X,Y,Z) Copyrightⓒ. 2016. All Rights Reserved. •TX Power : ±4dB Max • Min Input Level : ±4dB Max DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 15 / 22 11. Pin Description Pin No. Pin Name I/O Pin Description VCC Power Supply 3.3V USB_DN_WiFi I/O WiFi USB Communication signal USB D- USB_DP_WiFi I/O WiFi USB Communication signal USB D+ GND Ground WOWL Wake On WLAN VCC Power Supply 3.3V WLAN_EN WiFI_RESET GND Ground USB_DN_BT I/O BT USB Communication signal USB D- 10 USB_DP_BT I/O BT USB Communication signal USB D+ 11 GND Ground 12 BT_EN BT_RESET Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 16 / 22 12. Test method This is a conducted test method of WiFi RF performance. LAN Cable LitePoint IQxel Attanuator RF Cable 1) Test Condition. Auto test Program Cable Power 5V TESCOM Shield Box ( TC-5910DP) Power Supply 2) Test Set-up List. - Instrument : LitePoint IQxel - Shield Box : Tescom TC-5910DP - RF Cable : TESCOM 4011-0011 - Attenuator : Mini-Circuit 15542 10dB attenuator - USB Cable, LAN Cable, Murata RF Cable : MXHT83QE3000 or MXHS83QE3000 - Power Supply 3) Test Flow - Install the test set-up. - Power OFF. - Open the Shield box and install the DUT for test. - Close the shield box. - Power ON. - Check the driver icon. - Start testing. #. Notes. - Be careful that you can consider a RF cable LOSS. Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 17 / 22 13. Mechanical Characteristics 1) Outline view Item Assembly Appearance Test Conditions No defects of wiring, soldering and assembling No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight Copyrightⓒ. 2016. All Rights Reserved. 8g DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 14. Outline Drawing '17. 09 13 Jangeun Yang '17. 09 13 Hojin Roh '17. 09 13 Yeongtaek Kang Copyrightⓒ. 2016. All Rights Reserved. WC40134 REV.NO : 2.0 PAGE : 18 / 22 DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 15. Packing Information Copyrightⓒ. 2016. All Rights Reserved. WC40134 REV.NO : 2.0 PAGE : 19 / 22 DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 Copyrightⓒ. 2016. All Rights Reserved. WC40134 REV.NO : 2.0 PAGE : 20 / 22 DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 21 / 22 16. LG CI Specification. ■ LG CI regulation ■ LG CI print in Carton box Logo Ratio – 1 : 0.65 Logo Type Color -- Black ■ Planar figure of Carton box Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 21 / 22 ■ FCC and ISED Statements FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Part 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. OEM Responsibilities to comply with FCC and Industry Canada Regulations The module has been certified for integration into products only by OEM integrators under the following condition: - The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. - The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. As long as the two condition above is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and ISED Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following: “Contains FCC ID: BEJ-WC1NP8 “Contains ISED ID: 2703H- WC1NP8” Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 21 / 22 RSS-GEN, Sec. 7.1.3 – (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux C NR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate thisequipment.Attention: Les changements ou modifications de cet appareil non expressément approuvé par le fabricant peuvent annuler votre droit à utiliser cet équipement. Étiquetage du produit final (IC) Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro de certification IC. Si l’identification FCC et le numéro de certification IC ne sont pas visibles lorsque le module est installé à l’intérieur d’un autre dispositif, la partie externe du dispositif dans lequel le module est installé devra également présenter une étiquette faisant référence au module inclus. Dans ce cas, le produit final devra être étiqueté sur une zone visible avec les informations suivantes : « Contient module émetteur identification FCC ID : BEJ-WC1NP8 « Contient module émetteur ISED ID : 2703H-- WC1NP8” Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 21 / 22 ■ CE Statements Hereby, LG Electronics Inc. declares that the radio equipment type RF Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc# The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be collocated or operating in conjunction with any other antenna or transmitter. The host manufacturer integrating this module should be assessed total compliance with all essential requirements regarding this radio module. The host manufacturer has the responsibility that the host device should be compliance with all essential requirement of RED. Contact Address LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands Copyrightⓒ. 2016. All Rights Reserved. DOCUMENT No : REG. DATE : 2017.11.01 SPECIFICATION REV. DATE : 2017.11.16 MODEL NAME : TWCM-E001D (LGIT) WC1NP8 WC40134 REV.NO : 2.0 PAGE : 22 / 22 Change History of Revision Revision Date Contents of Revision Change Remark 1.0 '17.11.01 First release H.J.Roh 2.0 '17.11.16 Remove 802.11AC specification(Customer request) H.J.Roh Copyrightⓒ. 2016. All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : 박장순 Title : 슬라이드 제목 없음 Create Date : 2017:11:16 11:35:52+09:00 Creator Tool : Microsoft® PowerPoint® 2010 Modify Date : 2017:11:20 14:28:49+09:00 Metadata Date : 2017:11:20 14:28:49+09:00 Producer : Microsoft® PowerPoint® 2010 Document ID : uuid:8014694e-6d09-4f2e-a43f-0add8a5b706b Instance ID : uuid:6e0ffd81-38c6-4344-9da6-cdfcf8eaef73 Page Count : 26 Author : 박장순EXIF Metadata provided by EXIF.tools