LG Electronics USA Z47LC6DFUN LCD TV User Manual Zenith US

LG Electronics USA LCD TV Zenith US

Users Manual 2

29EXTERNAL EQUIPMENT SETUPDigital1. How to connectConnect one end of the optical or coaxial cable to theTV’s OPTICAL or COAXIAL port of DIGITAL AUDIOOUT.Connect the other end of the optical cable to thedigital audio input on the audio equipment.Set the “TV Speaker option - Off” in the AUDIO menu.(Xp.53). See the external audio equipment instructionmanual for operation.NOTEXWhen connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (Xp.53)CAUTIONXDo not look into the optical output port. Looking at the laser beam may damage your vision.XBlock the SPDIF out (optical) about the contents with ACP (Audio Copy Protection) function.!
30WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROLREMOTE CONTROL FUNCTIONSWhen using the remote control, aim it at the remote control sensor on the TV.THUMBSTICK(Up/Down/LeftRight/ENTER)Navigate the on-screen menus and adjust the systemsettings to your preference.BRIGHT -/+ Adjust the brightness on screen.TIMER Select the amount of time before your TV turns offautomatically. Xp.64VOLUME UP/DOWNIncrease/decrease the sound level.MUTE Switch the sound on or off. Xp.32FAV Scroll through the programmed Favorite channels. Xp.36CHANNELUP/DOWN Select available channels.PAGEUP/DOWNMove from one full set of screen information to the nextone.NUMBER buttonBACK Tune to the last channel viewed.- (DASH) Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.
31WATCHING TV / CHANNEL CONTROLPOWER Turns your TV or any other programmed equipment on or off, depending on the mode.MODE Select the remote operating mode: TV, DVD, VCR, AUDIO, or STB.*If the mode of another product is selected, a button on the remote control which is not used for theselected product can control the TV.RETURN Allows the user to move return one step in an interactive application or other user interaction function.MENU Displays the main menu.INPUT External input modes rotate in regular sequence: Antenna, Cable, AV 1-2, Component 1-2, RGB-PC,HDMI1, HDMI2, HDMI3 (AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sourcesare linked automatically, only if these are connected).Installing BatteriesOpen the battery compartment cover on the back side and install thebatteries matching correct polarity (+with +, -with -).Install two 1.5V AAA batteries. Don’t mix old or used batteries withnew ones.Close cover.VCR/DVDControlbuttonsControl video cassette recorders or DVD players.ADJUST Adjustment for screen Resolution, Position, Size, andPhase. Xp.26-27RATIO Change the aspect ratio. Xp.40PICTURE Adjust the factory preset picture depend on the viewingenvironment. Xp.41SOUND Select the appropriate type of sound for type ofprogram. Xp.50SAP Select MTS sound: Mono, Stereo, and SAP analogmode. Change the audio language DTV mode. Xp.54CC Select the Caption On/Off. Xp.57
32WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROLTURNIN G O N T VVOLUME ADJUSTMENTAdjust the volume to suit your personal preference.NOTEXIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.First, connect power cord correctly.At this moment, the TV switches to standby mode.In standby mode to turn TV on, press the , INPUT, CH (S or T)button on the TV or press the POWER, INPUT, CH (1 or 2),Number (0~9) button on the remote control.Select the viewing source by using the INPUT button on the remotecontrol.This TV is programmed to remember which power state it was last setto, even if the power cord is out.When finished using the TV, press the POWER button on the remotecontrol. The TV reverts to standby mode.!CHANNEL SELECTIONPress the CH (1 or 2) or NUMBER buttons to select a channel number.Press the VOL (+ or -) button to adjust the volume.If you want to switch the sound off, press the MUTE button.You can cancel the Mute function by pressing the MUTE or VOL (+ or -)button.
33WATCHING TV / CHANNEL CONTROLON-SCREEN MENUS SELECTIONYour TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.Press the MENU button and then use 1 or 2 button to select each menu.Press the 4 button and then use 1 2 3 4 button to display the available menus.Lock System : OffSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenLock System : OffSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchTV Rating-GeneralDownloadable RatingInput BlockDownloadable RatingInput BlockFor USA For CanadaSETUP PICTURELOCK AUDIOOPTION TIMELanguageInput LabelKey LockCaptionSet ID: English: Off: Off: 1ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9Auto TuningManual TuningChannel EditSound ModeAuto VolumeBalanceTV Speaker: Standard: On: 0: OnClockOff TimeOn TimeSleep TimeAuto Sleep: Oct 19, 2006, 03:44 AM: Off: Off: Off: Off
34WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROLCHANNEL SETUPAuto Scan (Auto Tuning)Automatically finds all channels available through antennaor cable inputs, and stores them in memory on the channellist.Run Auto Tuning again after any Antenna/Cable connectionchanges.A password is required to gain access to Auto Tuning menu ifthe Lock System is turned on.Auto TuningManual TuningChannel EditPress the MENU button and then use 1 or 2 buttonto select the SETUP menu.Press the 4 button and then use 1 or 2 button toselect Auto Tuning.Press the ENTER button to begin the channel search.Allow Auto Tuning to complete the channel searchcycle for ANTENNA and CABLE.NOTEDTV (Digital DTV antenna)TV (Analog TV antenna)CADTV (Digital CADTV cable)CATV (Analog CATV cable)Auto TuningManual TuningChannel EditSelection (X or ) leads you to the Auto Tuning screen.Auto TuningManual TuningChannel EditSelection (X or ) leads you to the Auto Tuning screen.Processing Auto Tuning. .DTV Ch.23Found Channel(s): 16Press to stop the current scan and start ANALOG ANTENNA channel scan.Next PrevMENU
35WATCHING TV / CHANNEL CONTROLAdd/Delete Channel (Manual Tuning)A password is required to gain access to Manual Tuningmenu if the Lock System is turned on.If selecting DTV or CADTV input signal, you can view theon-screen signal strength monitor to see the quality of thesignal being received.Auto TuningManual TuningChannel EditSelect channel type and RF-channel number.DTV 12Auto TuningManual TuningChannel EditPress the MENU button and then use 1 or 2 buttonto select the SETUP menu.Press the 4 button and then use 1 or 2 button toselect Manual Tuning.Press the 4 button and then use 1 or 2 button toselect TV, DTV, CATV, and CADTV.Press the 4 button and then use 1 or 2 button toselect channel you want to add or delete.Press the ENTER button to add or delete the channel.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.Auto TuningManual TuningChannel EditPress to delete the channel.Select channel type and RF-channel number.DTV 2DTV 12-0Bad Normal Good
36WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROLChannel EditingFrom the default channel list created from the Auto Tuningchannel search, you can create two different types of channellists in memory: “custom list” and “favorite channel list”.A custom list can be created by toggling each channel on oroff with ENTER button. The channels in the Custom List aredisplayed in black and the channels deleted from the CustomList are displayed in gray. Once a channel is highlighted youcan add or delete the channel by referring to the smallwindow at the top-left corner of the screen. You can create your own Favorite List. Use the FAV button onthe remote control when a channel is highlighted and thenadd or delete the channel to/from your Favorite List.Auto TuningManual TuningChannel EditPress the MENU button and then use 1 or 2 buttonto select the SETUP menu.Press the 4 button and then use 1 or 2 button toselect Channel Edit.Press the 4 button. You will now see a screen filledwith channel numbers and a preview picture. To moveto the next or previous page, press the CH (1 or 2)button.Use 1 2 3 4 button to select a channel and then usethe ENTER button to add or delete it.Press FAV button to add the channel to the FavoriteList. The surfing icon will appear in front of thatchannel number.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.Auto TuningManual TuningChannel Edit Selection (X or ) leads you to the Auto Tuning screen.
37WATCHING TV / CHANNEL CONTROLINPUT LISTPress the INPUT button to display external device that isconnected to the unit, on screen.Press the ENTER button to change the input to the activeexternal device. Use the 1 or 2 button to select the inputsource.If all external input sources are connected:If no external input sources are connected:If there is any external input source connected:(ex: When connected only to AV 2)AV 2Input ListAntennaCableAV 1AV 2Component 1Antenna Cable AV 1 AV 2 Component 1Component 2RGB-PCHDMI1HDMI2HDMI3Antenna CableAntenna Cable AV 2Antenna: Select it to watch over-the-air broadcasts.Cable: Select it to watch cable and digital cable.AV 1-2: Select them to watch a VCR or other external equipment.Component 1-2: Select them to watch DVD or a Digital set-top box.RGB-PC: Select it to view PC input.HDMI1-3: Select them to watch high definition devices.
38WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROLINPUT LABELYou can set a label for each input source when it's not inuse.LanguageInput LabelKey LockCaptionSet ID: English: Off: Off: 1Press the MENU button and then use 1 or 2 buttonto select the OPTION menu.Press the 4 button and then use 1 or 2 button toselect Input Label.Press the 4 button and then use 1 or 2 button toselect the source: AV 1, AV 2, Component 1,Component 2, RGB-PC, HDMI1, HDMI2 or HDMI3.Press the 3 or 4 button to select the label.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.LanguageInput LabelKey LockCaptionSet IDAV 1AV 2Component 1Component 2RGB-PCHDMI1HDMI2Cable BoxVCRDVDSet Top BoxVCRGameSatelliteHDMI3 Cable Box
39WATCHING TV / CHANNEL CONTROLKEY LOCKThe TV can be set up so that it can only be used with theremote control.This feature can be used to prevent unauthorized viewing bylocking out the front panel controls.This TV is programmed to remember which option it waslast set to even if you turn the TV off.LanguageInput LabelKey LockCaptionSet ID: English: Off: Off: 1Press the MENU button and then use 1 or 2 buttonto select the OPTION menu.Press the 4 button and then use 1 or 2 button toselect Key Lock.Press the 4 button and then use 1 or 2 button toselect On or Off.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.LanguageInput LabelKey LockCaptionSet IDOffOn
40PICTURE CONTROLPICTURE CONTROLPICTURE SIZE (ASPECT RATIO) CONTROLThis feature lets you choose the way an analog picture with a 4:3 aspect ratio isdisplayed on your TV.RGB-PC input source use 4:3 or 16:9 aspect ratio.NOTEXIf a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible.This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any afterimage from the black bars will normally dissipate after a few minutes.Press the RATIO button repeatedly to select the desired picture format.You can also adjust Aspect Ratio in the PICTURE menu.!Set by programSelects the proper picture proportion to matchthe source’s image.4:3Choose 4:3 when you want to view a picture withan original 4:3 aspect ratio.16 : 9Adjust the picture horizontally, in a linear pro-portion to fill the entire screen.Zoom 1Choose Zoom 1 when you want to view the picturewithout any alteration. However, the top and bottomportions of the picture will be cropped.Zoom 2Choose Zoom 2 when you want the picture to bealtered, both vertically extended and cropped.The picture taking a halfway trade off betweenalteration and screen coverage.Just ScanFollowing selection will lead you to view thepicture of best quality without loss of originalpicture in high resolution image.Notes:If there are noise in original picture, youcan see the noise at the edge.Just Scan operates only in DTV/CADTV(720p/1080i/1080p), HDMI-DTV, DVI-DTV input source.(4:3 4:3) (16:9 16:9)Set by program Set by program4:3Set By Program16 : 9Zoom 1Zoom 2Just Scan
41PICTURE CONTROLPRESET PICTURE SETTINGSPicture Mode - PresetThere are factory presets for picture settings available in theuser menus. You can use a preset, change each settingmanually, or use the Intelligent Sensor.Dynamic, Standard, Mild Settings are preset for theoptimum picture quality at the factory and are notadjustable.In the User1 and User2 modes only, user can directly adjustthe contrast, brightness, color, sharpness, tint, backlight.You can also use the PICTURE menu to adjust Picture Mode.Press the PICTURE button repeatedly to select thepicture appearance setup option as below :Dynamic, Standard, Mild, User1 (your own settings),and User2 (your own settings).Press the RETURN button to save and return to TVviewing.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetDynamicStandardMildUser1User2
42PICTURE CONTROLPICTURE CONTROLColor Tone - PresetChoose one of three automatic color adjustments. Set toWarm to enhance hotter colors such as red, or set to Cool tosee less intense colors with more blue.When selecting Picture Mode options (Dynamic, Standardand Mild), Color Temperature is automatically changed.When selecting Picture Mode options (User1 and User2),you can choose the Color Temperature.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetCoolMediumWarmUserPress the MENU button and then use 1 or 2 buttonto select the PICTURE menu.Press the 4 button and then use 1 or 2 button toselect Color Temperature.Press the 4 button and then use 1 or 2 button toselect either Cool, Medium, Warm or User.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9
43PICTURE CONTROLMANUAL PICTURE ADJUSTMENTPicture Mode - User ModeAdjust the picture appearance to suit your preference andviewing situations.Press the MENU button and then use 1 or 2 buttonto select the PICTURE menu.Press the 4 button and then use 1 or 2 button toselect Picture Mode.Press the 4 button and then use 1 or 2 button toselect User1 or User2.Press the 4 button and then use 1 or 2 button toselect the desired picture option (Contrast,Brightness, Color, Sharpness, Ti n t , or Back Light).Back LightTo control the brightness of the screen, adjust thebrightness of LCD panel.Press the 4 button and then use 3 or 4 button tomake appropriate adjustments.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetDynamicStandardMildUser1User2Selection (X or ) leads you to the detailed setting screen.Back LightUser1ContrastBrightnessColorSharpnessTint100855050500PressMENUto confirm.Contrast 85
44PICTURE CONTROLPICTURE CONTROLColor Tone - User ModeYou can also adjust the detailed settings (Red, Green, Blue)by selecting the Color Temperature-User menu.When selecting Picture Mode options (User1 and User2),you can choose the Color Temperature.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetCoolMediumWarmUserPress the MENU button and then use 1 or 2 buttonto select the PICTURE menu.Press the 4 button and then use 1 or 2 button toselect Color Temperature.Press the 4 button and then use 1 or 2 button toselect User.Press the 4 button and then use 1 or 2 button toselect Red, Green, or Blue.Press the 4 button and then use 3 or 4 button tomake appropriate adjustments.The adjustment range of Red, Green, or Blue is -20~ +20.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9Selection (X or ) leads you to the detailed setting screen.UserRedGreenBlue000PressMENUto confirm.Red 0
45PICTURE CONTROLDB - PICTURE IMPROVEMENT TECHNOLOGYDB is Zenith’s unique picture improving technology todisplay a real HD source through an advanced digital signalprocessing algorithm.When selecting Picture Mode options (Dynamic, Standard,and Mild), DB is automatically changed to Auto.When selecting Picture Mode options (User1 and User2),you can choose the Auto / Manual.When selecting the Manual, you can adjust the DB Contrast,DB Color and DB Noise.It’s not available to use this function in RGB-PC inputsource.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetDB ContrastDB ColorDB NoiseManualPress the MENU button and then use 1 or 2 buttonto select the PICTURE menu.Press the 4 button and then use 1 or 2 button toselect DB.Press the 4 button and then use 3 or 4 button toselect either Auto or Manual.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.Selecting the Manual1. Press the 4 button and then use the 1 or 2button to select DB Contrast, DB Color or DBNoise.DB Contrast: Optimizing the contrast automatically according to the brightness of the reflection.DB Color: Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors.DB Noise: Removing the noise up to the point where it does not damage the original picture.2. Use the 3 or 4 button to select On or Off.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9OnOnOn
46PICTURE CONTROLPICTURE CONTROLADVANCED - CINEMA 3:2 PULLDOWN MODESet up the TV for the best picture appearance for viewingmovies.When you operate Cinema 3:2 Mode (3:2 Pull-Down Modeor Cinema Correction Mode), the TV will adjust 24 fpsvideo from movies to 30 fps video for display.This feature operates only in TV (Analog TV/CATV, DigitalDTV/CADTV), AV1, AV2, Component 480i/1080i, andHDMI 1080i mode.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture ResetCinema 3:2 ModeBlack LevelPress the MENU button and then use 1 or 2 buttonto select the PICTURE menu.Press the 4 button and then use 1 or 2 button toselect Advanced.Press the 4 button and then use 1 or 2 button toselect Cinema 3:2 Mode.Use 3 or 4 button to select On or Off.Press RETURN button to return to TV viewing orpress MENU button to return to the previous menu.ScreenPicture ModeColor TemperatureDBAdvancedAspect RatioPicture Reset: User1: Cool: 16:9OffLow

Navigation menu