LG Electronics USA Z47LC6DFUN LCD TV User Manual Zenith US
LG Electronics USA LCD TV Zenith US
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 2
Digital 1. How to connect Connect one end of the optical or coaxial cable to the TV’s OPTICAL or COAXIAL port of DIGITAL AUDIO OUT. Set the “TV Speaker option - Off” in the AUDIO menu. (Xp.53). See the external audio equipment instruction manual for operation. ! NOTE When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (Xp.53) EXTERNAL EQUIPMENT SETUP Connect the other end of the optical cable to the digital audio input on the audio equipment. CAUTION Do not look into the optical output port. Looking at the laser beam may damage your vision. Block the SPDIF out (optical) about the contents with ACP (Audio Copy Protection) function. 29 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. WATCHING TV / CHANNEL CONTROL THUMBSTICK Navigate the on-screen menus and adjust the system (Up/Down/Left settings to your preference. Right/ENTER) BRIGHT -/+ Adjust the brightness on screen. TIMER Select the amount of time before your TV turns off automatically. Xp.64 VOLUME UP Increase/decrease the sound level. /DOWN MUTE Switch the sound on or off. Xp.32 FAV Scroll through the programmed Favorite channels. Xp.36 CHANNEL Select available channels. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. NUMBER button BACK Tune to the last channel viewed. - (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. 30 POWER Turns your TV or any other programmed equipment on or off, depending on the mode. MODE Select the remote operating mode: TV, DVD, VCR, AUDIO, or STB. *If the mode of another product is selected, a button on the remote control which is not used for the selected product can control the TV. RETURN Allows the user to move return one step in an interactive application or other user interaction function. MENU Displays the main menu. VCR/DVD Control video cassette recorders or DVD players. Control buttons ADJUST Adjustment for screen Resolution, Position, Size, and Phase. Xp.26-27 RATIO Change the aspect ratio. Xp.40 PICTURE Adjust the factory preset picture depend on the viewing environment. Xp.41 WATCHING TV / CHANNEL CONTROL INPUT External input modes rotate in regular sequence: Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 (AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources are linked automatically, only if these are connected). SOUND Select the appropriate type of sound for type of program. Xp.50 SAP Select MTS sound: Mono, Stereo, and SAP analog mode. Change the audio language DTV mode. Xp.54 CC Select the Caption On/Off. Xp.57 Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +, -with -). Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. Close cover. 31 WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH (S or T) button on the TV or press the POWER, INPUT, CH (1 or 2), Number (0~9) button on the remote control. WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. ! NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION Press the CH (1 or 2) or NUMBER buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. Press the VOL (+ or -) button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button. 32 ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Press the MENU button and then use 1 or 2 button to select each menu. Press the 4 button and then use 1 2 3 4 button to display the available menus. PICTURE Auto Tuning Picture Mode : User1 Manual Tuning Color Temperature : Cool Channel Edit DB Advanced Aspect Ratio : 16:9 Picture Reset Screen LOCK For USA For Canada AUDIO Sound Mode : Standard Set Password Set Password Auto Volume : On Block Channel Block Channel Balance :0 Movie Rating TV Rating-English TV Speaker : On TV Rating-Children TV Rating-French TV Rating-General Downloadable Rating Downloadable Rating Input Block Clock : Oct 19, 2006, 03:44 AM Off Time : Off Lock System : Off Lock System : Off WATCHING TV / CHANNEL CONTROL SETUP Input Block OPTION TIME Language : English Input Label Key Lock : Off On Time : Off Caption : Off Sleep Time : Off Set ID :1 Auto Sleep : Off 33 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on. WATCHING TV / CHANNEL CONTROL Press the MENU button and then use 1 or 2 button to select the SETUP menu. Auto Tuning Manual Tuning Channel Edit Press the 4 button and then use 1 or 2 button to select Auto Tuning. Press the ENTER button to begin the channel search. Allow Auto Tuning to complete the channel search cycle for ANTENNA and CABLE. Auto Tuning Manual Tuning Channel Edit Selection (X or ) leads you to the Auto Tuning screen. NOTE Auto Tuning Manual Tuning Channel Edit Processing Auto Tuning. . Selection (X or DTV ) leads Ch.23you to the Auto Tuning screen. Found Channel(s): 16 DTV (Digital DTV antenna) TV (Analog TV antenna) CADTV (Digital CADTV cable) CATV (Analog CATV cable) 34 Press to stop the current scan and start ANALOG ANTENNA channel scan. Next MENU Prev Add/Delete Channel (Manual Tuning) A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. Auto Tuning Manual Tuning Channel Edit Press the 4 button and then use 1 or 2 button to select Manual Tuning. Press the 4 button and then use 1 or 2 button to select TV, DTV, CATV, and CADTV. Auto Tuning Press the 4 button and then use 1 or 2 button to select channel you want to add or delete. Manual Tuning Channel Edit Select channel type and RF-channel number. DTV WATCHING TV / CHANNEL CONTROL Press the MENU button and then use 1 or 2 button to select the SETUP menu. Press the ENTER button to add or delete the channel. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Auto Tuning Manual Tuning Channel Edit Select channel type and RF-channel number. DTV 12 DTV 12-0 Bad Press Normal Good to delete the channel. 35 WATCHING TV / CHANNEL CONTROL Channel Editing WATCHING TV / CHANNEL CONTROL From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. You can create your own Favorite List. Use the FAV button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List. Auto Tuning Manual Tuning Channel Edit Press the MENU button and then use 1 or 2 button to select the SETUP menu. Press the 4 button and then use 1 or 2 button to select Channel Edit. Auto Tuning Press the 4 button. You will now see a screen filled with channel numbers and a preview picture. To move to the next or previous page, press the CH (1 or 2) button. Use 1 2 3 4 button to select a channel and then use the ENTER button to add or delete it. Press FAV button to add the channel to the Favorite List. The surfing icon will appear in front of that channel number. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 36 Manual Tuning Channel Edit Selection (X or ) leads you to the Auto Tuning screen. INPUT LIST Press the INPUT button to display external device that is connected to the unit, on screen. Press the ENTER button to change the input to the active external device. Use the 1 or 2 button to select the input source. AV 2 Input List Antenna Cable AV 1 If all external input sources are connected: Antenna Cable AV 1 AV 2 Component 1 HDMI3 HDMI2 HDMI1 RGB-PC Component 2 If no external input sources are connected: Antenna WATCHING TV / CHANNEL CONTROL AV 2 Component 1 Cable If there is any external input source connected: (ex: When connected only to AV 2) Antenna Cable AV 2 Antenna: Select it to watch over-the-air broadcasts. Cable: Select it to watch cable and digital cable. AV 1-2: Select them to watch a VCR or other external equipment. Component 1-2: Select them to watch DVD or a Digital set-top box. RGB-PC: Select it to view PC input. HDMI1-3: Select them to watch high definition devices. 37 WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. WATCHING TV / CHANNEL CONTROL Press the MENU button and then use 1 or 2 button to select the OPTION menu. : English Input Label Key Lock : Off Caption : Off Set ID :1 Press the 4 button and then use 1 or 2 button to select Input Label. Press the 4 button and then use 1 or 2 button to select the source: AV 1, AV 2, Component 1, Component 2, RGB-PC, HDMI1, HDMI2 or HDMI3. Press the 3 or 4 button to select the label. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 38 Language Language Input Label AV 1 Key Lock AV 2 Cable Box VCR Caption Component 1 DVD Set ID Component 2 Set Top Box RGB-PC VCR HDMI1 Game HDMI2 Satellite HDMI3 Cable Box KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. Language : English Input Label Key Lock : Off Caption : Off Set ID :1 Press the 4 button and then use 1 or 2 button to select Key Lock. Press the 4 button and then use 1 or 2 button to select On or Off. Language Input Label Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Key Lock Off Caption On WATCHING TV / CHANNEL CONTROL Press the MENU button and then use 1 or 2 button to select the OPTION menu. Set ID 39 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. ! NOTE If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any afterimage from the black bars will normally dissipate after a few minutes. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the PICTURE menu. PICTURE CONTROL Set by program Selects the proper picture proportion to match the source’s image. (4:3 4:3) (16:9 16:9) Zoom 1 Zoom 2 Set by program Set by program 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. Zoom 2 4:3 Just Scan 16:9 Adjust the picture horizontally, in a linear pro-portion to fill the entire screen. 16:9 Set By Program Following selection will lead you to view the picture of best quality without loss of original picture in high resolution image. Notes: If there are noise in original picture, you can see the noise at the edge. Just Scan operates only in DTV/CADTV (720p/1080i/1080p), HDMI-DTV, DVI-DTV input source. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. 40 Just Scan PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. Dynamic, Standard, Mild Settings are preset for the optimum picture quality at the factory and are not adjustable. In the User1 and User2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint, backlight. PICTURE CONTROL Press the PICTURE button repeatedly to select the picture appearance setup option as below : Dynamic, Standard, Mild, User1 (your own settings), and User2 (your own settings). Press the RETURN button to save and return to TV viewing. You can also use the PICTURE menu to adjust Picture Mode. Picture Mode : User1 Picture Mode Dynamic Color Temperature : Cool Color Temperature Standard DB DB Mild Advanced Advanced User1 Aspect Ratio User2 Aspect Ratio : 16:9 Picture Reset Picture Reset Screen Screen 41 PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to Warm to enhance hotter colors such as red, or set to Cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Color Temperature is automatically changed. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. PICTURE CONTROL Press the MENU button and then use 1 or 2 button to select the PICTURE menu. Picture Mode : User1 Color Temperature : Cool DB Advanced Press the 4 button and then use 1 or 2 button to select Color Temperature. Aspect Ratio Screen Press the 4 button and then use 1 or 2 button to select either Cool, Medium, Warm or User. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Color Temperature Cool DB Medium Advanced Warm Aspect Ratio User Picture Reset Screen 42 : 16:9 Picture Reset MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. Picture Mode : User1 Color Temperature : Cool DB Advanced Press the 4 button and then use 1 or 2 button to select Picture Mode. Aspect Ratio : 16:9 Picture Reset Screen Press the 4 button and then use 1 or 2 button to select User1 or User2. Press the 4 button and then use 1 or 2 button to select the desired picture option (Contrast, Brightness, Color, Sharpness, Tint, or Back Light). Back Light To control the brightness of the screen, adjust the brightness of LCD panel. Press the 4 button and then use 3 or 4 button to make appropriate adjustments. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Picture Mode Dynamic Color Temperature Standard DB Mild Advanced User1 Aspect Ratio User2 PICTURE CONTROL Press the MENU button and then use 1 or 2 button to select the PICTURE menu. Picture Reset Screen Selection (X or ) leads you to the detailed setting screen. User1 Contrast 85 Brightness 50 Color 50 Sharpness 50 Tint Back Light 100 Press MENU to confirm. Contrast 85 43 PICTURE CONTROL Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the Color Temperature-User menu. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. PICTURE CONTROL Press the MENU button and then use 1 or 2 button to select the PICTURE menu. Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the 4 button and then use 1 or 2 button to select Color Temperature. Press the 4 button and then use 1 or 2 button to select User. Press the 4 button and then use 1 or 2 button to select Red, Green, or Blue. : 16:9 Picture Reset Screen Picture Mode Color Temperature Cool DB Medium Advanced Warm Aspect Ratio User Picture Reset Screen Selection (X or ) leads you to the detailed setting screen. Press the 4 button and then use 3 or 4 button to make appropriate adjustments. The adjustment range of Red, Green, or Blue is -20~ +20. User Red Green Blue Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Press Red 44 MENU to confirm. DB - PICTURE IMPROVEMENT TECHNOLOGY DB is Zenith’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), DB is automatically changed to Auto. When selecting Picture Mode options (User1 and User2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the DB Contrast, DB Color and DB Noise. It’s not available to use this function in RGB-PC input source. Picture Mode : User1 Color Temperature : Cool PICTURE CONTROL Press the MENU button and then use 1 or 2 button to select the PICTURE menu. DB Advanced Aspect Ratio Press the 4 button and then use 1 or 2 button to select DB. : 16:9 Picture Reset Screen Press the 4 button and then use 3 or 4 button to select either Auto or Manual. Selecting the Manual 1. Press the 4 button and then use the 1 or 2 button to select DB Contrast, DB Color or DB Noise. DB Contrast: Optimizing the contrast automatically according to the brightness of the reflection. DB Color: Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. DB Noise: Removing the noise up to the point where it does not damage the original picture. Picture Mode Color Temperature DB Manual Advanced Aspect Ratio DB Contrast On Picture Reset DB Color On Screen DB Noise On 2. Use the 3 or 4 button to select On or Off. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 45 PICTURE CONTROL ADVANCED - CINEMA 3:2 PULLDOWN MODE Set up the TV for the best picture appearance for viewing movies. When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. PICTURE CONTROL Press the MENU button and then use 1 or 2 button to select the PICTURE menu. Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the 4 button and then use 1 or 2 button to select Advanced. : 16:9 Picture Reset Screen Press the 4 button and then use 1 or 2 button to select Cinema 3:2 Mode. Picture Mode Color Temperature Use 3 or 4 button to select On or Off. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 46 DB Advanced Cinema 3:2 Mode Off Aspect Ratio Black Level Picture Reset Screen Low
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2008:08:04 11:41:29+08:00 Create Date : 2008:08:04 11:41:18+08:00 Title : Zenith_US.book Author : Yvette.Huang Creator : FrameMaker 7.2 Producer : Acrobat Distiller 6.0 (Windows) Page Count : 18 Mod Date : 2008:08:04 11:41:29+08:00 Creation Date : 2008:08:04 11:41:18+08:00 Metadata Date : 2008:08:04 11:41:29+08:00EXIF Metadata provided by EXIF.tools