LG Innotek REGXXOXXA ESL Gateway User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2598434
Application ID	bf9FwRcZXxxefzDJrYaVwg==
Document Description	User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	330.55kB (4131875 bits)
Date Submitted	2015-04-28 00:00:00
Date Available	2015-10-25 00:00:00
Creation Date	2015-04-24 15:55:22
Producing Software	Nitro PDF PrimoPDF
Document Lastmod	2015-04-24 15:55:22
Document Title	Microsoft Word - Manual
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	Athena

* LG Innotek REGX-XOXXA (Electronic Shelf Label Gateway)
This is the reference manual for ESL Gateway handling.
After fully understanding this manual, use the Gateway in proper way
◆ Read all instructions before performing any work.
◆ Installation must be done completely after fully understanding [Safety Rules]
◆ Installer should give this Instruction to actual user after fully understanding it.
◆ Please, keep this manual in a handy place. When reinstalling or repairing, give this manual to
new user or contractor
1. Safety Rules
◆ In case of mishandling, risk sign arises, Meaning of the sign is explained in below table.
◆ In this guide, the safety instruction levels are classified into "WARNING" and "CAUTION".
CAUTION - Indicates incorrect handling that may cause hazardous conditions, resulting in slight
injury or physical damage.
WARNING - Indicates incorrect handling that may cause hazardous conditions, resulting in death
or severe injury
! CAUTION
Only use rated voltage. (Using lower/higher
Do not touch this equipment or cable with wet
voltage than rated voltage may cause fire)
hands. (It may cause electrocution)
Do not install this equipment where using
Do not locate it in high humidity environment.
combustible gas leak. (It may cause fire)
(Condensation or Rust in the equipment cause
electrocution or fire)
Do not use excessive pressure on equipment to
When you have minor trouble, please refer to
remove. (It may cause damage to ceiling
“Trouble Shooting” section first
material)
! WARNING
Shut down your equipment immediately if it
Keep your device away from radiators and heat
produces smoke, a strange odor, or unusual
sources. (It may cause fire)
noise.
Never disassemble or modify this product.
Be sure to set this equipment on a firm, stable,
(Improper work may result in injury or fire.
horizontal
Contact selling office for repair.)
broken or cause injury if it falls)
Do not allow foreign body to fall into the
Installation must be done completely following
equipment. (It may cause fire or electrocution)
this instruction to prevent fire or electrocution.
Do not Install on the insulating material (It may
Do not connect both POE cable and DC cable
cause fire)
to ESL Gateway (It may cause break down or
ceiling.
(The
product
could
be
fire)
Request
to
seller
office
or
professional
contractor for installation.
Do not cover this equipment with a newspaper,
tablecloth, curtain, etc. (it may cause fire)
2. Installation Parts
Below parts are needed for installation. Please procure the parts before installation.
No.
Category
LAN Cable
Description
10BaseT Cat. 5 or 100BaseTX Cat. 5 STP (Shielded Twisted Pair)
RJ-45
DC Adaptor (Using DC)
DC 12V / 1A or above, 3.5∅ DC Power Jack
POE hub (Using POE)
More 12Watts Max Port Output
Screw driver
3. Contents of pack
- REGX-XOXXA (ESL Gateway) 1ea
- User’s Manual (this manual) 1ea
- Bracket 1ea (Optional)
- Screw 2ea (Optional)
4. Installation (Using Spring)
① Before Installation, Check following conditions.
- Ceiling should be able to stand weight of ESL Gateway (0.4kg)
- Fix reinforcement material to prevent ESL Gateway from moving on the ceiling.
! WARRING - Be sure to set this equipment on a firm, stable, horizontal ceiling.
(The product could be broken or cause injury if it falls)
② Secure space to insert ESL Gateway into the ceiling
Make specified space (Diameter ∅100mm+3, -0)
Mounting ceiling thickness : 5mm ~ 20mm
! WARRING – Do not Install on the insulating material (It may cause fire)
③ Connect (LAN Cable/Power Cable) Wire
There are 2 cases for powering ESL Gateway
Case 1 : Using POE (Power Over Ethernet)
Case 2 : Using DC Adapter
! WARRING – Do not connect both POE cable and DC cable to ESL Gateway
(It may cause break down or fire)
④ Insert Gateway into the Hole
Pushing 2 springs in direction of arrow paint, put the ESL Gateway into the ceiling.
⑤ How to Remove
Put flathead screwdriver to make hole on the both side.
Push screwdriver in arrow direction to make gap between ceiling and equipment.
When gap is wider, Grab spring by hand and put down the equipment.
! CAUTION – Do not use excessive pressure on equipment to remove.
(It may cause damage to ceiling material)
5-1. Using Bracket
If you cannot make a hole on the ceiling, use the bracket in the package to install the ESL
Gateway.
① Secure the bracket to the ceiling
② Combine the ESL gateway with bracket and bracket socket
Associated side view is as below:
5. Specifications
6. LED Operating
LED on the ESL Gateway indicates equipment status. Before operating, check this LED Color.
After Booting and all OS loaded, red power LED turn is Normal Status.
LED Operating Table
LED
WLAN
802.15.4
Explanation
Communication with PDA or
article matching device
Green
Communication with ESL Tag
(Transmit data)
Green
Ethernet Communication with EMS
Power
All LED
Color
Green
Scene
On
Off
Active
In-active
Blinking
Off
Blinking
Off
Active
In-active
Active
In-active
Normal State
Power Off
Upgrade state or
Factory test mode
Boot up
OS loading after Boot up
Boot up
All
On
Off
Blinking
(1-sec Interval)
On
OS loading
All
Off
Gateway status indicating
Red
If there is any problem, turn off the equipment immediately and contact selling office.
7. Troubleshooting
- Hardware Reset
In case of malfunctions, reset the gateway by Hardware Reset button.
On the top of the equipment there is a reset button. Pressing reset button strongly for 10
seconds
8. Warranty
Under normal use condition, products resulting from its own failures in the warranty period will
be free maintenance. Warranty Terms as following:
a) Charge-free maintenance of the product is one year. We can repair it for free during the
guarantee period (Damages not caused by misuse).
b) During guarantee period, breakdown caused by misuse or other reasons out of range of
warranty. You could ask repair and we charge for changed components and the
maintenance.
c)
When the products need maintenance, contact to the local distributor.
d) Taking apart of the product or improper washing is out of warranty range.
e) We do not accept the damaged item due to modification or add other functions.
f)
Spares or replacement parts will be available for a period of 5 years from the end-of-sale
date
The Following Circumstances will not be free warranty
a) Period check, maintenance or change components due to normal attrition.
b) The product was improperly installed
c)
The damages due to crash extrusion, artificial flooding, moisture or other personal
reasons.
d) The damages due to floods, fire, lightning strike and other natural calamities or force
majeure incidents factors
e) Repaired item by non-authorized repair centers.
All above terms, if changed, regarded to relevant regulations.
9. Regulation Information
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced network technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
This appliance and its antenna must not be co-located or operation in conjunction with any other
antenna or transmitter.
A minimum separation distance of 20 ㎝ must be maintained between the antenna and the
person for this appliance to satisfy the RF exposure requirement

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
Page Count                      : 9
Warning                         : XMP format error (no closing tag for mT0����)
Producer                        : Nitro PDF PrimoPDF
Create Date                     : 2015:04:24 15:55:22+07:00
Modify Date                     : 2015:04:24 15:55:22+07:00
Title                           : Microsoft Word - Manual
Creator                         : PrimoPDF http://www.primopdf.com
Author                          : Athena

EXIF Metadata provided by EXIF.tools