LG Innotek RNTDST01A IP Camera User Manual
LG Innotek Co., Ltd. IP Camera
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2993972 |
| Application ID | RKWqy8aWa6dBXCm/1UdbkQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.53kB (444107 bits) |
| Date Submitted | 2016-05-17 00:00:00 |
| Date Available | 2016-11-13 00:00:00 |
| Creation Date | 2016-05-09 12:01:14 |
| Producing Software | Microsoft® Office PowerPoint® 2007 |
| Document Lastmod | 2016-05-17 14:44:35 |
| Document Title | PowerPoint í”„ë ˆì í…Œì´ì…˜ |
| Document Creator | Microsoft® Office PowerPoint® 2007 |
| Document Author: | ih |
Home Security Camera 1. Product & Accessories IP Network Camera, Adapter, Ethernet to Micro USB Cable REGULATION INFORMATION TO THE USER (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Anchor & Screw Quick Manual 2. Operating Condition - IP Network Camera : 32℉~104℉ 3. Wall mount Installation 1. Tighten two screws to fix the bracket on the wall using screw driver. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. REGULATION INFORMATION TO THE USER (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps Non-slip pad 2.Push and lock stand body to the bracket . 4. Table-top installation 7. LED Descriptioin 1. Attach the non-slip pad under mount bracket and lock the camera body. 2. Adjust thecamera view direction Camera Video Led Camera Power Led Camera Network Led LED Camera Power LED Camera Network LED Status Blinking Green Pulsing Amber Pulsing Green Solid Amber Solid Green Solid Red Off Pulsing Green Pulsing Red Solid Green Solid Red Camera Video LED 5. Pairing the Device 1. Plug in the camera. Off Solid Green Off Description Firmware updating Connecting to Server Booting No Connectivity to Server Working Malfunction Power Off Connecting to Router No Connectivity to Router Network Working Network Working with weak signal (RSSI < -80) Network Disabled Recording Camera not Working 8. Factory Reset Press and hold ‘Reset’ button more than 10 seconds until blink red of Network LED 2. Connect ethernet cable to controller ethernet port. 3. Please follow instructions on their controller. Reset Reset Button 표현 그림 필요 9. Caution 1) This camera is an indoor good.(Don’t install outdoor) 2) Don’t cover vent hole 3) Don’t drop water or chemical substance. 4) Strong light is a cause of some image quality problem. (sun light, headlight form automobiles, etc.) 6. Mount SD Card(Optional) 1. Insert a micro SD memory(be careful memory up/down side)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : ih Create Date : 2016:05:09 12:01:14+09:00 Modify Date : 2016:05:17 14:44:35+09:00 Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : ih Title : PowerPoint 프레젠테이션 Creator Tool : Microsoft® Office PowerPoint® 2007 Metadata Date : 2016:05:17 14:44:35+09:00 Producer : Microsoft® Office PowerPoint® 2007 Document ID : uuid:d94cc025-a586-4334-9ff4-63d513f7e514 Instance ID : uuid:fddf62e5-7af4-4084-bdfe-99164e83e144 Page Count : 2EXIF Metadata provided by EXIF.tools