LG Innotek TWCMK005D Wi-Fi/BT Combo module User Manual

LG Innotek Co., Ltd. Wi-Fi/BT Combo module

User Manual

User ManualPRODUCT NAME : 802.11a/b/g/n + Bluetooth Combo ModuleMODEL NAME : TWCM-K005D(00)-0073The information contained herein is the exclusive property of LG Innotekand shall not be distributed, reproduced or disclosed in whole or no in partwithout prior written permission of LG Innotek.
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.1/ 9Table of ContentsNo. Description Page1 Features 22 Module Photo 23 Block Diagram 34 Storage Conditions 45 Operating Conditions 46 Pin Description 57 Outline Drawing 68 Packing Information 7
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.2/ 92. Module Photo1. FeaturesTWCM-K005D is the module for IEEE 802.11a/b/g/n wireless LAN & Bluetooth4.1.TWCM-K005D is based on MeidaTek MT7632 solution.IEEE 802.11 a/b/g/n Dual Band WLAN infrastructureBluetooth 4.1 + HSSize : 40mm x46.5mm x 8.25mm2.4GHz and 5GHz, internal PA and LNADual-band 2T2R mode with date rate up to 300MbpsWake on WLAN and BluetoothTwo Metal Press antenna for WLAN and One External antenna for BluetoothHost interface : USB 2.0 (WLAN & Bluetooth)Security : WAPI, WEP, WPRA, WPA2, WMM, AES, TKIP, CKPApplication: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.3/ 93. Block Diagram
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.4/ 94. Storage Conditions5. Operating ConditionsParameter Min Typ Max UnitAmbient Temperature 0 - 60 ℃Ambient Humidity (40℃) - - 85 %Supply Voltage 4.75 5 5.25 VdcParameter Min Max UnitStorage Temperature -10 +70 ℃Storage Humidity (40℃) - 90 %Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device.. Other conditions1) Do not use or store modules in the corrosive atmosphere, especially where chloridegas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperatureand relative humidity do not exceed 5 to 40℃and 20 to 60%.3) Assemble the modules within 6 months.Check the soldering ability in case of 6 months over.< Table 1 >
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.5/ 96. Pin DescriptionNo. Name I/O Description1VDD I VDD 5.0V2 USB_DN I/O USB Communication signal USB_DN3 USB_DP I/O USB Communication signal USB_DP4 GND - GND5 WoWLAN O Wake on Wireless LAN6 GND - GND7 BT_WAKE_HOST O Bluetooth wake-up signal8 Reset I Reset controlled by main SOC< Top View >< Bottom View >Note.1) Recommend a Module install sequence for prevent USB device failure- Supply 5.0V power - Connect to data signal (USB_DP, USB_DN)2) Connector : Connector A1257WR0-8PS AA18
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.6/ 97. Outline Drawing
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.7/ 98. Packing Information8-1. Tray packing
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.8/ 98-2. Box packing
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.9/ 98-2. Box packing
User ManualPAGE :REG. DATE : 2015.09.14MODEL NAME : TWCM-K005DREV. DATE : 2015.09.14REV.NO : 1.0©2015 LGIT. All rights reserved.10 / 9FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Information for OEM Integrator This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. End product labelling The label for end product must include “Contains FCC ID: YZP-TWCMK005D”. “CAUTION : Exposure to Radio Frequency Radiation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users.”

Navigation menu