LG Innotek TWCMK005D Wi-Fi/BT Combo module User Manual

LG Innotek Co., Ltd. Wi-Fi/BT Combo module

User Manual

Download: LG Innotek TWCMK005D Wi-Fi/BT Combo module User Manual
Mirror Download [FCC.gov]LG Innotek TWCMK005D Wi-Fi/BT Combo module User Manual
Document ID2798039
Application IDxzUapJF/JRmA+wQzQ8LrZA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize102.4kB (1280046 bits)
Date Submitted2015-10-29 00:00:00
Date Available2016-04-26 00:00:00
Creation Date2015-10-29 16:25:43
Document Lastmod2015-10-29 16:25:43
Document TitleUser Manual

User Manual
PRODUCT NAME :
802.11a/b/g/n + Bluetooth Combo Module
MODEL NAME
TWCM-K005D
The information contained herein is the exclusive property of LG Innotek
and shall not be distributed, reproduced or disclosed in whole or no in part
without prior written permission of LG Innotek.
(00)-0073
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
REV.NO : 1.0
PAGE : 1 / 9
Table of Contents
No.
Description
Page
Features
Module Photo
Block Diagram
Storage Conditions
Operating Conditions
Pin Description
Outline Drawing
Packing Information
©2015 LGIT. All rights reserved.
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
REV.NO : 1.0
PAGE : 2 / 9
1. Features
TWCM-K005D is the module for IEEE 802.11a/b/g/n wireless LAN & Bluetooth4.1.
TWCM-K005D is based on MeidaTek MT7632 solution.
 IEEE 802.11 a/b/g/n Dual Band WLAN infrastructure
 Bluetooth 4.1 + HS
 Size : 40mm x46.5mm x 8.25mm
 2.4GHz and 5GHz, internal PA and LNA
 Dual-band 2T2R mode with date rate up to 300Mbps
 Wake on WLAN and Bluetooth
 Two Metal Press antenna for WLAN and One External antenna for Bluetooth
 Host interface : USB 2.0 (WLAN & Bluetooth)
 Security : WAPI, WEP, WPRA, WPA2, WMM, AES, TKIP, CKP
 Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB
2. Module Photo
©2015 LGIT. All rights reserved.
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
3. Block Diagram
©2015 LGIT. All rights reserved.
REV.NO : 1.0
PAGE : 3 / 9
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
REV.NO : 1.0
MODEL NAME : TWCM-K005D
PAGE : 4 / 9
4. Storage Conditions
Caution : The specifications in Table 1 define levels at which permanent damage to the
device can occur. Function operation is not guaranteed under these conditions.
Operating at absolute maximum conditions for extend periods can adversely affect the
long-term reliability of the device.
Parameter
Min
Max
Unit
Storage Temperature
-10
+70
℃
Storage Humidity (40℃)
90
< Table 1 >
. Other conditions
1) Do not use or store modules in the corrosive atmosphere, especially where chloride
gas, sulfide gas, acid, alkali, salt or the like are contained.
Also, avoid exposure to moisture.
2) Store the modules where the temperature
and relative humidity do not exceed 5 to 40℃ and 20 to 60%.
3) Assemble the modules within 6 months.
Check the soldering ability in case of 6 months over.
5. Operating Conditions
Parameter
Min
Typ
Max
Unit
Ambient Temperature
60
℃
Ambient Humidity (40℃)
85
Supply Voltage
4.75
5.25
Vdc
©2015 LGIT. All rights reserved.
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
REV.NO : 1.0
MODEL NAME : TWCM-K005D
PAGE : 5 / 9
6. Pin Description
No.
Name
I/O
Description
VDD
VDD 5.0V
USB_DN
I/O
USB Communication signal USB_DN
USB_DP
I/O
USB Communication signal USB_DP
GND
GND
WoWLAN
Wake on Wireless LAN
GND
GND
BT_WAKE_HOST
Bluetooth wake-up signal
Reset
Reset controlled by main SOC
< Top View >
Note.
1) Recommend a Module install sequence for prevent USB device failure
- Supply 5.0V power
- Connect to data signal (USB_DP, USB_DN)
2) Connector A : Connector A1257WR0-8PS
< Bottom View >
©2015 LGIT. All rights reserved.
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
7. Outline Drawing
©2015 LGIT. All rights reserved.
REV.NO : 1.0
PAGE : 6 / 9
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
8. Packing Information
8-1. Tray packing
©2015 LGIT. All rights reserved.
REV.NO : 1.0
PAGE : 7 / 9
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
8-2. Box packing
©2015 LGIT. All rights reserved.
REV.NO : 1.0
PAGE : 8 / 9
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
8-2. Box packing
©2015 LGIT. All rights reserved.
REV.NO : 1.0
PAGE : 9 / 9
User Manual
REG. DATE : 2015.09.14
REV. DATE : 2015.09.14
MODEL NAME : TWCM-K005D
REV.NO : 1.0
PAGE : 10 / 9
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Information for OEM Integrator
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
End product labelling
The label for end product must include “Contains FCC ID: YZP-TWCMK005D”.
“CAUTION : Exposure to Radio Frequency Radiation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment must be installed and operated with minimum distance of 20cm between the radiator and your
body. This transmitter module is authorized only for use in device where the antenna may be installed such
that 20 cm may be maintained between the antenna and users.”
©2015 LGIT. All rights reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 11
Language                        : en-US
Tagged PDF                      : Yes
Title                           : 슬라이드 제목 없음
Author                          : 박장순
Create Date                     : 2015:10:29 16:25:43-07:00
Modify Date                     : 2015:10:29 16:25:43-07:00
Producer                        : Microsoft® PowerPoint® 2013
Creator                         : Microsoft® PowerPoint® 2013
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YZP-TWCMK005D

Navigation menu