LG Innotek TWFMB005D Wi-Fi Module User Manual

LG Innotek Co., Ltd. Wi-Fi Module Users Manual

Users Manual

SPECIFICATIONSPRODUCT NAME : Dual Band 2T2R MIMO Wi-Fi ModuleMODEL NAME : TWFM-B005DThe information contained herein is the exclusive property of LG Innotekand shall not be distributed, reproduced or disclosed in whole or no in partwithout prior written permission of LG Innotek.(00)-0073 This module will be installed in only TV for Wi-Fi communication.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407871/ 16Change History of RevisionRevision Date Contents of Revision Change Remark1.0 ’11.10.22 First release Lee©2011 LGIT. All rights reserved.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407872/ 16Table of ContentsNo Description Page1Ft31Features32 Ordering Information 33 Block Diagram 44 Absolute Maximum Ratings 45 Operating Conditions 56Standard Test Conditions56Standard Test Conditions57 Electrical Specifications 68 Environment Tests 119 Pin Description 1210 S/W 1311Assembly Drawing1411Assembly Drawing1412 Packing Information 15©2011 LGIT. All rights reserved.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407873/ 161. FeaturesTWFM-B005D is the small size and low power module for IEEE 802.11a/b/g/n wireless LAN. TWFM-B005D is based on Broadcom BCM43236B solution.IEEE 802.11 a/b/g/n Dual Band WLAN infrastructureSize : 90mm x 16mm x 6.45mm2.4GHz and 5GHz internal PATwo stream spatial multiplexing up to 300MbpsPIFA ANT (2T2R MIMO)Use on-chip OTP (One-Time Programmable)USB 2.0Supports drivers for Windows Vista, 2000, XP, LinuxSecurity : WPA,WPA2,AES(TKIP) ,IEEE 802.1X • Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB2. Ordering InformationModel DescriptionTWFMB005DWiFi Mod le D al Band 2T2R MIMOTWFM-B005DWi-Fi Module, Dual Band 2T2R MIMO©2011 LGIT. All rights reserved.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407874/ 16RF802.11n MACANTSUSB 2 0ANTBCM43236B3. Block DiagramRFSwitch+diplexer3.3V 1.2V2.4GHz PA5GHz PA2 x 2Radio802.11nPHY SecurityOTP(2K bits)System BusGPIOUSB 2.0 or HSICANTUSB ConnectorARM CortexM3 CPU384KMemory4. Absolute Maximum RatingsMain Clock(20MHz) DC-DC5V< Fig.1 Hardware Block Diagram >ParameterMinMaxUnitCaution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device.ParameterMinMaxUnitStorage Temperature -10 +80 ℃Storage Humidity (40℃)-90 %< Table 1 Absolute Maximum Ratings >g. Other conditions1) Do not use or store modules in the corrosive atmosphere, especially where chloridegas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature©2011 LGIT. All rights reserved.2) Store the modules where the temperatureand relative humidity do not exceed 5 to 40℃and 20 to 60%.3) Assemble the modules within 6 months.Check the soldering ability in case of 6 months over.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407875/ 165. Operating ConditionsParameter Min Typ Max UnitOperating Temperature -10 - +60 ℃Operating Humidity - - 85 %Supply Voltage VDD_5V 4.5 5.0 5.5 Vdc6. Standard Test ConditionsThe Test for electrical specification shall be performed under the following conditionunless otherwise specified.1). Ambient conditionTemperature : 25℃±5℃. Temperature : 25℃±5℃. Humidity : 65% ±5% R.H. 2). Power supply voltages . 5V (±5%) input power at the Module 3). Current consumption over recommended range of supply voltage and operating conditions is like below. When it’s tested, it must be supplied more than 2 times of maximal current.©2011 LGIT. All rights reserved.FCC (Federal Communications Commission) WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: YZP-TWFMB005D The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. End users cannot modify this transmitter device. Any Unauthorized modification could void the user`s authority to operate this device.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407876/ 167. Electrical SpecificationsCurrent Consumption Min. Typ. Max. UnitTX M d ( MCS7)4701) DC Characteristics2) RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) TX Mode ( MCS7)-470-mAIdle and Associated state - 215 -Radio disabled state - 100 -Items ContentsSpecification IEEE802.11bMode DSSS/CCKChannel frequency 2400 ~ 2483 MHz Data rate 1,2,5.5,11MbpsTX Characteristics Min. Typ. Max. UnitPower Level 13 15 17 dBmSpectrum Mask1st side lobes ( to fc ±11MHz) --43-30dBr2nd side lobes ( to fc ±22MHz) --58-50dBrModulation Accuracy (EVM) - 30 35 %Power On/Off ramp-0.52.0usecPower On/Off ramp0.52.0usecFreq. Tolerance -25 - 25 ppmChip Clock Freq. Tolerance -25 - 25 ppmRX Characteristics Min. Typ. Max. UnitMinimum Input Level Sens (FER ≤8%)8876dBm©2011 LGIT. All rights reserved.Minimum Input Level Sens. (FER ≤ 8%)-88-76dBmMaximum Input Level (FER ≤ 8%) -10 - - dBm* Normal Condition : 25℃, VDD=5V.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407877/ 16Items ContentsS ifi ti IEEE502 113) RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified) Specification IEEE502.11gMode OFDMChannel frequency 2400 ~ 2483.5 MHz Data rate 6,9,12,18,24,36,48,54Mbps,,,,,,, pTX Characteristics Min. Typ. Max. UnitPower Level 13 15 17 dBmSpectrum Maskat fc ±11MHz --32-20dBrat fc ±20MHz --43-28dBrat fc ≥ ±30MHz --48-40dBrConstellation Error (EVM) - -34 -25 dBFreq. Tolerance -20 - 20 ppmChip Clock Freq. Tolerance -20 - 20 ppmRX Characteristics Min. Typ. Max. UnitMinimum Input Level Sens. (PER ≤ 10%) - -75 -65 dBmMaximum Input Level (PER ≤ 10%) -20 - - dBm*Normal Condition : 25℃VDD=5V©2011 LGIT. All rights reserved. Normal Condition : 25℃, VDD=5V.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407878/ 16Items ContentsS ifi ti IEEE802 114) RF Characteristics for IEEE802.11a ( 54Mbps mode unless otherwise specified) Specification IEEE802.11aMode OFDMChannel frequency 5150~5250MHz, 5725 ~ 5850MHzData rate6,9,12,18,24,36,48,54MbpsData rate6,9,12,18,24,36,48,54MbpsTX Characteristics Min. Typ. Max. UnitPower Level 11 13 15 dBmSpectrum Maskat fc ±11MHz --32-20dBrat fc ±20MHz --43-28dBrat fc ≥ ±30MHz --48-40dBrConstellation Error (EVM) - -34 -25 dBFreq. Tolerance -20 - 20 ppmChip Clock Freq. Tolerance -20 - 20 ppmRX Characteristics Min. Typ. Max. UnitMinimum Input Level Sens. (PER ≤ 10%) - -72 -65 dBmMaximum Input Level (PER ≤ 10%) -30 - - dBm©2011 LGIT. All rights reserved.* Normal Condition : 25℃, VDD=5V.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC407879/ 16Items ContentsS ifi ti IEEE802 11 5GH5) RF Characteristics for IEEE802.11an ( MCS7 mode unless otherwise specified) Specification IEEE802.11n –5GHzMode OFDMChannel frequency 5150~5250MHz, 5725 ~ 5850MHzData rateData rate ~135MbpsTX Characteristics Min. Typ. Max. UnitPower Level (HT20 / HT40 : MCS7) 11 13 15 dBmSpectrum Mask (HT20)at fc ±11MHz --32-20dBrat fc ±20MHz --35-28dBrat fc ±30MHz --45-40dBrConstellation Error (EVM) - -32 -28 dBFreq. Tolerance -20 - 20 ppmChip Clock Freq. Tolerance -20 - 20 ppmRX Characteristics Min. Typ. Max. UnitMinimum Input Level Sens. (HT20,PER ≤ 10%) --71-64dBmMinimum Input Level Sens. (HT40,PER ≤ 10%)--68-61dBm©2011 LGIT. All rights reserved.( )Maximum Input Level (PER ≤ 10%) -30 - - dBm* Normal Condition : 25℃, VDD=5V.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC4078710 / 16Items ContentsSifii IEEE802 11 24GH6) RF Characteristics for IEEE802.11gn ( MCS7 mode unless otherwise specified) Specification IEEE802.11n – 2.4GHzMode OFDMChannel frequency 2400 ~ 2483.5 MHzData rate6 5 13 19 5 26 39 52 58 5 65MbpsData rate6.5,13,19.5,26,39,52,58.5,65MbpsTX Characteristics Min. Typ. Max. UnitPower Level (HT20/HT40 : MCS7) 11 13 15 dBmSpectrum Mask (HT20)at fc ±11MHz --32-20dBrat fc ±20MHz --35-28dBrat fc ±30MHz --45-40dBrConstellation Error (EVM) - -32 -28 dBFreq. Tolerance -20 - 20 ppmChip Clock Freq. Tolerance -20 - 20 ppmRX Characteristics Min. Typ. Max. UnitMinimum Input Level Sens. (HT20,PER ≤ 10%) --73-64dBmMinimum Input Level Sens. (HT40,PER ≤ 10%) --70-62dBm©2011 LGIT. All rights reserved.Maximum Input Level (PER ≤ 10%) -20 - - dBm* Normal Condition : 25℃, VDD=5V.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC4078711 / 168. Environment TestsItem Test Conditions Specifications Heat LoadTestInitial values are measured at standard test condition.Leave samples in 60℃±2℃for 500 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour.-Supply voltage : standard ±5%pp y g- Supply voltage cycle : 1.5h on, 0.5h offInitial values are measured at standard test condition.Leave samples in 40℃±5℃90 95% RH for 96±5•TX Power: ±4dB Max• Min Input Level : ±4dB MaxHumidityLoad TestLeave samples in 40℃±5℃, 90 ~ 95% RH for 96 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour.- Supply voltage : standard + 5%- Supply voltage cycle : 1.5h on, 0.5h offCold TestInitial values are measured at standard test condition.Leave samples in －10℃±2℃for 96 ±5 hours, andin standard ambient for 1 hour with standard powerSupply then take measurements within 1 hour.TemperatureShockTake measurements in standard test condition.Temp. : -10℃~ +80℃Duration : 30 minRamp-up & Ramp-down for 5 minCycle : 100cycle©2011 LGIT. All rights reserved.Cycle : 100cycle.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC4078712 / 169. Pin DescriptionPin No. Pin Name I/O Pin Description1VDDIVDD 5V1VDDIVDD 5V2 USB_DN I/O USB Communication signal USB_DN3 USB_DP I/O USB Communication signal USB_DP4 GND - GND5 WoWLAN O Wake-On - Wireless LAN6 GND - GND<TOPVi >A< TOP View >ANoteNote.1) Recommend a Module install sequence for prevent USB device failure- Supply 5V power - Connect to data signal (USB_DP, USB_DN)2) If remove the module, proceed in reveres sequence3) Connector : A1257WR0-6PS ( JWT)A©2011 LGIT. All rights reserved.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC4078713 / 1610. S/WThe module is controlled by wl command. It is intended for those evaluating and/or testing Broadcom’s IC, describes a subset of the commands available in wl, the Broadcom ® WLAN client utility.1) Command SyntaxThe syntax is as follows:wl <adapter> [-h] [-d|u|x] <command> [arguments]where-h this message and command descriptions-d output format signed integer-u output format unsigned integer-x output format hexdecimalThe [h,u] option is only to print help.Other syntax specifics are as follows:• Entries within square brackets, such as [arguments], are optional. In the above example,|switches within brackets, such as –h, are typed as shown. The |symbol should not be typed, it represents the word or.• Entries within angle brackets, such as <adapter>, are required and indicate that a value must be inserted in place of the item contained within the angle brackets.•Entries shown outside of either square or angle brackets are to be typed as shown.Entries shown outside of either square or angle brackets are to be typed as shown.2) Command List and Version•CMDSSyntax: wl cmdsPurpose: Generates a list of available commands.Parameters:NoneReturns: All commands available to the attached 43XX chip.•VERSyntax: wl verPurpose: Generates a list of available commands.Parameters:None©2011 LGIT. All rights reserved.Returns: All commands available to the attached 43XX chip.•Please refer to ‘80211-TI201-R’ technical document of Broadcom to other commands.
S P E C I F I C A T I O NPAGE :DOCUMENT No :REG. DATE : 2011.10.22MODEL NAME : TWFM-B005DREV. DATE : 2011.10.22REV.NO : 1.1HC4078714 / 1611. Assembly Drawing©2011 LGIT. All rights reserved.

Navigation menu