LG Innotek TWZTV001D Wireless Module for Lighting Control User Manual
LG Innotek Co., Ltd. Wireless Module for Lighting Control
User Manual
SPECIFICATIONS PRODUCT NAME : Wireless Module for Lighting Control MODEL NAME TWZT-V001D-F CUSTOMER MODEL NAME : The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved Yun Yeong Uk Ro Young Suk Kim Yong Gyu DOCUMENT No. 14-RFM-0174 ‘14.09.17 ‘14.09.17 PAGE 21 ‘14.09.17 LG Innotek Co., Ltd. REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : 0.4 PAGE 2 / 20 Record of Revision Revision Date Revision Description 0.1 2014.09.17 Initial Release. 0.2 2014.10.07 Temperture spec changed. 0.3 2014.10.22 Current spec changed. Firmware Version Updated. 0.4 2014.10.29 Label spec Updated. Copyrightⓒ. 2014. All Rights Reserved. Remark REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F CONTENTS 1. GENERAL DESCRIPTION 2. FEATURES 3. BLOCK DIAGRAM 4. ABSOLUTE MAXIMUM RATING 5. RECOMMENDED OPERATING CONDITION 6. GENERAL CHARACTERISTICS 7. RF SPECIFICATIONS 8. ANTENNA SPECIFICATIONS 9. FIRMWARE INFORMTION 10. RELIABILITY SPECIFICATIONS 11. APPLICATION CIRCUIT 12. MODULE INTERFACE 13. MECHANICAL INFORMATION 14. PRODUCT LABEL INFORMATION 15. PACKING INFORMATION 16. ORDERING INFORMATION Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : 0.4 PAGE 3 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : 0.4 PAGE 4 / 20 1. GENERAL DESCRIPTION LG Innotek’s Common Zigbee Module solution for IEEE 802.15.4, Zigbee( ZHA ) and RF4CE applications. In addition, this modules are high performance hardware feature and easy connectivity solution for wireless lighting control and smart home applications. It enables robust network nodes to be built with very low total bill-of material costs. This module is suited for systems where very low power consumption is required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption. LG Innotek‘s common Zigbee Module contains the RF IC and necessary external components and integrated very small size PCB pattern Antenna. It is provides very simple hardware support for easy smart lighting control and WSN applications 2. FEATURES - 2.4GHz IEEE802.15.4 compliant RF Transceiver - Excellent Receiver Sensitivity and Robustness to interference - Programmable Output Power Up to 6.5 dBm - Small Module with PCB Pattern Antenna Solution : Size 22×29×7.7mm - High performance and Low power 32-bit RISC CPU - 192-KB In-System-Programmable Flash and External 256-KB Flash for OTA(Over the Air) - 8-Pin connection for Power Supply Unit - Support Standard Protocol ( ZHA ) - Support Wireless S/W Upgrade( OTA : Over the Air ) Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. DATE : 2014. 10 . 29 REV. NO. : 0.4 PAGE 5 / 20 3. BLOCK DIAGRAM 2.4GHz Antenna Matching Components X-Tal Pin No. 2.4GHz Radio 32 - bit RISC CPU R,L,C 8-Pin Connector Copyrightⓒ. 2014. All Rights Reserved. Pin Function Mode Sel Reserved Power Supplied with Typ. 3.0V Reserved GND Dimming ( PWM ) Reserved On/Off REG. DATE : 2014. 9. 17 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. DATE : 2014. 10 . 29 REV. NO. : 0.4 PAGE 6 / 20 4. ABSOLUTE MAXIMUM RATING⑴ NO ITEM Supply voltage All supply pins must have the same voltage⑴ RATING UNIT 3.6 Storage temperature range -20 ~ 85 ℃ Input RF level 10 dBm (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 5. RECOMMENDED OPERATING CONDITIONS NO ITEM RATING UNIT Operating ambient Temperature Range, TA -20 ~ +85 ℃ Operating supply voltage (Typ. 3.0v), Power Ripple ±100mV 2.7 ~ 3.3 6. GENERAL CHARACTERISTICS Measured on LG Innotek [TWZT-V001D-F] design with VDD = 3.0V and TA=25℃, Unless otherwise noted. all limits apply over the entire operating range, TA = -20 ~ +85℃, VDD 3.0±0.3 and fc = 2.4 ~ 2.5GHz NO Test Item MIN. Typ. MAX. Unit Condition Operating Supply Voltage 2.7 3.0 3.3 Frequency Range 2400 2483.5 MHz 5MHz Channel Spacing Tx( at +6 dBm) 40 45 50 mA Active-Mode Rx( Boost mode ) 23 28 33 mA Active-Mode -15 +15 KV Air Condition, No Electrical Problem -2.0 +2.0 KV Contact Condition, No Electrical Problem Peak Current Consumption ESD Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : 0.4 PAGE 7 / 20 7. RF SPECIFICATION Measured on LG Innotek [TWZT-V001D-F] design with VDD = 3.0V and Ta=25℃, RF Conducted Test, Unless otherwise noted. All limits apply over the entire operating range, Ta =-20 ~ +85℃ , VDD 3.0±0.3 and fc = 2.4 ~ 2.4835 GHz NO Test Item MIN. Typ. MAX. Unit Condition Nominal Output Power dBm Single Ended 50Ω Load (Required Min.-3dBm) Receiver Sensitivity -100 -94 dBm PER=1% (Required -85dBm) Maximum Input Level dBm PER=1% (Required -20dBm) Frequency Tolerance -20 +20 ppm All Operating Temp. (Required Max. ±40ppm) Error Vector Magnitude (EVM) 10 35 -31 dBm 2nd Harmonic -31 dBm 3rd Harmonic -31 dBm All Band (30MHZ ~ 12.5GHz) MIN. Typ. MAX. Unit 2.4 2.4835 GHz Harmonic Spurious Emissions ( Required Max. 35% ) ( Required ~ ) : refer to IEEE 802.15.4 8. ANTENNA SPECIFICATION NO Test Item Condition Frequency Range All Operating Temp. Nominal Impedance 50 Ω Band width 80 MHz Internal Antenna Passive efficiency 45 50 Single Antenna unit(Only) Internal Antenna VSWR 1.5:1 2.5:1 Single Antenna unit(Only) Peak Gain 3.0 dB Single Antenna unit(Only) Directivity 6.0 dB Single Antenna unit(Only) All Band (30MHZ ~ 12.5GHz) Mechanical Information : Size : 15×5.5×0.9mm, PCB Material Fr-4 (4.4 εr) Condition : It can be changed by measurement condition(only R&D Environment) Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : 0.4 PAGE 8 / 20 9. FIRMWARE Support Profile Firmware Version 1.2.0 TOKEN_MFG_BOARD_NAME: "TWZT_V001D_F" TOKEN_MFG_STRING: "LG Innotek" TOKEN_MFG_MANUF_ID: 0x102E TOKEN_MFG_PHY_CONFIG: 0xFFFE It can be updated by customer’s request. < LED indicator Description > LED Mode Operation Scene1 (Normal) On After first association Scene2 (Normal) Off Before first association or After factory reset Scene3 (Test Mode) On, Off toggle 1 times(repeatedly) The on/off output will begin to cycle on, and off Scene4 (Test Mode) On, Off toggle 2 times(repeatedly) dimming output will operate to sweep the light between minimum and maximum intensity. Scene5 (Normal) On, Off toggle(repeatedly) Identify mode after association Copyrightⓒ. 2014. All Rights Reserved. Description REG. DATE : 2014. 9. 17 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. DATE : 2014. 10 . 29 REV. NO. : 0.4 PAGE 9 / 20 10. RELIABILITY SPECIFICATIONS 1) Transportation Test ITEM Conditions Characteristic Direction : ⑩ ⑤ ③ ② ① Packaging Drop ⑦ ⑧ ⑥ ⑨ ④ - No Electrical Problem - No Mechanical Problem - Box Check Height : depend on weight of packaging Drop Height (cm) Weight Bottom Etc. 10Kg ↓ 65cm 50cm 10~20Kg 60cm 45cm High Temp. Storage Temp. : +85℃ Humidity : 90%RH Time : 96-Hr Set Condition : Packaging - No Electrical Problem - No Mechanical Problem Low Temp. Storage Temp. : -20℃ Humidity : 0%RH Time : 96-Hr Set Condition : Packaging - No Electrical Problem - No Mechanical Problem Packaging Vibration Initial value measured at standard test condition Frequency : 10~500Hz Axis : X,Y,Z G : X-axis 1.5G, 60min Y-axis 1.5G, 30min Z-axis 1.5G, 30min - Box Check - No Electrical Problem - No Mechanical Problem Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : PAGE 0.4 10 / 20 10. RELIABILITY SPECIFICATIONS 2) Environment Test ITEM Conditions Characteristic High Temp. Operating Initial value measured at standard test condition Temp. : +85 °C Voltage : standard±5% Time : 96Hr, Full Load Mode - No Electrical Problem Low Temp. Operating Initial value measured at standard test condition Temp. : -20 °C Humidity : 0%RH Voltage : standard±5% Time : 96-Hr, Full Load Mode - No Electrical Problem High Temp. Storage Initial value measured at standard test condition Temp. : +85 °C Time : 96-Hr After exposure at the condition of +70 ℃. Specimens would be keep at room temperature for 2-Hr and do test. - No Electrical Problem Low Temp. Storage Initial value measured at standard test condition Temp. : -20 °C Humidity : 0%RH Time : 96-Hr After exposure at the condition of -10℃. Specimens would be keep at room temperature for 2-Hr and do test. - No Electrical Problem High Temperature & Humidity Storage Initial value measured at standard test condition Temp. : +85 °C Humidity : 90%RH Time : 96-Hr After exposure at the condition of +70 ℃. Specimens would be keep at room temperature for 3-Hr and do test. - No Electrical Problem High Temperature & Humidity Operating Initial value measured at standard test condition Temp. : +85 °C Humidity : 85%RH Time : 96-Hr After exposure at the condition of +70℃. Specimens would be keep at room temperature for 2-Hr and do test. - No Electrical Problem Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 ITEM Temperature & Humidity Cycle Thermal Shock Test Vibration Test ESD Test S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F Conditions Initial value measured at standard test condition Temp./Humidity : : [25℃→55℃(3h),55℃(9h), 55℃→25℃(3h),25℃(9h)] X6 / 95%, 144Hrs. Measuring After 1-2hr at standard conditions -20℃~85℃ 100Cycle Measuring After 1-2hr at standard conditions. REV. NO. : PAGE 0.4 11 / 20 Characteristic - No Electrical Problem - No Electrical Problem Initial value measured at standard test condition Frequency : 10~500Hz Axis : X,Y,Z G : X-axis 1.5G, 60min Y-axis 1.5G, 30min Z-axis 1.5G, 30min - No Electrical Problem Condition - Contact : 150PF / 330Ω, ± 2 kV, 10 times - Air : 150PF / 330Ω, ± 15kV, 10 times All functions and playing shall be recovered after ESD hit without reboot for reset. *It can be changed (Not fixed) Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. DATE : 2014. 10 . 29 REV. NO. : PAGE 11. APPLICATION CIRCUIT 1K ~ 3KΩ 2.7 ~ 3.3V Mode sel VDD 1uF ~ 4.7uF GND Dimming On/off TWZT-V001D-F Copyrightⓒ. 2014. All Rights Reserved. 0.4 12 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F 12. MODULE INTERFACE [ PIN DESCRIPTION ] < Host Interface with PSU > -. PWM Mode No. I/O Pin Name Descrption Mode Sel Low -> Test mode GPIO1 Reserved VDD Power Supply Typ. 3.0V (2.7V ~ 3.3V) GPIO2 Reserved GND Ground Dim Dimming Control GPIO3 Reserved On/off On/off Control * Recommended Dimming & On/off Pin Initial State : Pull up ⑧⑦ ⑥ ⑤④③ ②① Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : PAGE 0.4 13 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 REV. NO. : S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F PAGE 0.4 14 / 20 13. MECHANICAL INFORMATION < MODULE PCB-A > 15.0 27.0 3.9 < Module Top Feature > < Module Slot Dimension > < CASE ASS’Y > 17.4 3.7 18.1 7.0 22.0 1.0±0.1 LED INDICATOR 5 ±0.2 7.7 22.0 Copyrightⓒ. 2014. All Rights Reserved. 17.4±0.1 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F 14. PRODUCT LABEL INFORMATION P/N : TWZT -V001D FCC ID : YZP-TWZTV001D IEEE Address : XXXXXXXX xxxxXXXX 7/8 Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : PAGE 0.4 15 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F 15. PACKING INFORMATION Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : PAGE 0.4 16 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : PAGE 0.4 17 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F Copyrightⓒ. 2014. All Rights Reserved. REV. NO. : PAGE 0.4 18 / 20 REG. DATE : 2014. 9. 17 REV. DATE : 2014. 10 . 29 S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. NO. : PAGE 0.4 19 / 20 Date of production ( ex, 14.01.23 ) ( 8-digit serial on date of production. Ex, 00000001 ) Copyrightⓒ. 2014. All Rights Reserved. REG. DATE : 2014. 9. 17 REV. NO. : S PE C I FI CAT I O N MODEL NAME : TWZT-V001D-F REV. DATE : 2014. 10 . 29 PAGE 0.4 20 / 20 16. ORDERING INFORMATION Product Type TW Wireless Module Module RF Type Zigbee Mechanical Type Stick Chip Maker Ember Version 001 001 T/Rx Type Duplex Process PCB Top Chip Mount Ass’y Copyrightⓒ. 2014. All Rights Reserved. FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Create Date : 2014:10:30 20:16:09+09:00 Creator Tool : Microsoft® PowerPoint® 2010 Modify Date : 2014:11:18 13:17:21+09:00 Metadata Date : 2014:11:18 13:17:21+09:00 Format : application/pdf Creator : 전시 Title : 슬라이드 제목 없음 Producer : Microsoft® PowerPoint® 2010 Document ID : uuid:d723537d-3ca7-4023-b80e-911612b5c4ca Instance ID : uuid:70e82aad-04c8-4177-bf1c-aae9b665fc1f Page Count : 21 Language : ko-KR Author : 전시EXIF Metadata provided by EXIF.tools