LG Innotek VL1000 LTE/CDMA(EVDO) Wireless Modem Module User Manual 1
LG Innotek Co., Ltd. LTE/CDMA(EVDO) Wireless Modem Module 1
Contents
- 1. Manual
- 2. User manual 1 of 2
- 3. User manual 2 of 2
User manual 1 of 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2589743 |
| Application ID | Dspv66bJ/t6DJpU43jVF0g== |
| Document Description | User manual 1 of 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 129.93kB (1624064 bits) |
| Date Submitted | 2015-04-20 00:00:00 |
| Date Available | 2015-10-17 00:00:00 |
| Creation Date | 2015-03-24 17:54:45 |
| Producing Software | Microsoft® PowerPoint® 2010 |
| Document Lastmod | 2015-04-15 11:33:16 |
| Document Title | 슬ë¼ì´ë“œ 1 |
| Document Creator | Microsoft® PowerPoint® 2010 |
| Document Author: | Administrator |
User Guide for LTD-VL1110 (Eagle) Product : LTE/CDMA(EVDO) Wireless Modem Model name : LTD-VL1110 Table of Contents 1. Overview 2. Major feature 3. Interface 4. Electrical specification 5. RF specification 6. Mechanical specification 7. General specification 8. Connector 9. RFx information 10. FCC Approval Copyright ⓒ. 2014. All Rights Reserved. 1. Overview The LTD-VL1110 is achieved as personal mobile communication devices of the compact radio equipment, the latest design of the parts becoming smaller, lighter weight having the LTE(700/1700MHz), CDMA(850/1900MHz) bands. It is the vehicle’s telematics system that connect with LTE and CDMA(EVDO) wireless network and the wireless module with voice and data communication. It can be operated at land, rivers, and other similar areas. On LTE operating mode, It can be communicated with uplink 50Mbps, downlink up to 100Mbps data transfer speed such as a movie or a video call. It may be able to receive large amounts of data. Standard RS-232 port and USB port communicating with the host system via AT-command or control commands can be used to send data. Voice calls are possible. Copyright ⓒ. 2014. All Rights Reserved. 2. Major feature Dimension Weight 93.15(L) x 45.0(W) x 7.6(T) mm 45g(max) Interface USB, UART, General Purpose I/O pins Antenna FAKRA Connector Mechanical Temperature * Operation : -20℃ ~ +70 ℃ Storage : -40 ℃ ~ +85 ℃ Main Chipset MDM 9615 Memory 2048Mb(NAND) / 1024Mb(SDRAM) Standard 3GPP Rel.8 LTE Cat.3 - DL Speed : 100 Mbps(20M bandwidth) - UL Speed : 50 Mbps(20M bandwidth) 3GPP2 CDMA 1X, EVDO Rev.A - DL Speed : 3.1 Mbps - UL Speed : 1.8 Mbps Technology Band LTE B4, B13 CDMA 850(Cellular), 1900 (PCS) GPS Not Supported Power LTE : Typ. 23dBm(Power Class 3) CDMA : Typ. 24dBm (Power Class 3) DC Power 3.8V Functions Voice, Data, SMS ETC Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.1 Pin output Customer P/N is connected with outer device using 40 pin connector 48H_END UART_TX_TCU UART_RX_TCU Figure 1. Connector pin arrangement Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.2 Pin description Pin NO. Signal Name NC 1, 2, 3, 4, 5, 6, 9, 10, 13, 14, 15, 17 , 23, 24, 25, 26, 3 NC V_BATT 31, 32 POWER GND 21, 22, 33, 34, 40 GND 16 PCM_3.3V_TXD PCM DATA OUT 18 PCM_3.3V_RXD PCM DATA IN 19 PCM_3.3V_CLK PCM CLK 20 PCM_3.3V_SYNC PCM SYNC 37 UART_RXD UART RX DATA 39 UART_TXD UART TX DATA UART_RFR UART ready-for-receive UART_CTS UART clear-to-send 29 USB_VBUS 35 USB_D+ I/O USB differential data (+) 36 USB_D- I/O USB differential data (-) 11 BOOT_OK 12 MSG 27 96H_END 28 RESET_IN 30 ACC_ON_SLEEP Audio PCM UART2 (DM Port) USB (USB2.0) User Interface In/Out POWER GND Table 1. Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. Function Power supply for the USB transceiver Modem Booting Completion / Modem Wake Up Received emergency message from Center Signified in 96 hours standby mode ending Modem Hardware reset input Modem Power ON / Modem POWER Sleep 3. Interface 3.3 UART(RS-232 Interface) This module is provided with interface supporting Standard RS-232 protocol. DCE(modem) communicate with DTE(host) through data or control ATCommand. Pin No. Signal Name Direction Function 37 UART_RXD UART RX DATA 39 UART_TXD UART TX DATA UART_RFR UART ready-for-receive UART_CTS UART clear-to-send Table 2. UART Pin descriptions 3.4 USB It is supported with universal serial bus for high data communication. And It is satisfied with USB2.0 specification and supported with max.480Mbps Pin No. Signal Name Direction Function 37 UART_RXD UART RX DATA 39 UART_TXD UART TX DATA UART_RFR UART ready-for-receive UART_CTS UART clear-to-send Table 3. USB Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.5 Audio This module is provided with PCM interface. The resistor of pulled-up or pulled-down in this pin must be over 50Kohm. Pin No. Signal Name Direction Function 37 UART_RXD UART RX DATA 39 UART_TXD UART TX DATA UART_RFR UART ready-for-receive UART_CTS UART clear-to-send Table 4. PCM Pin descriptions 3.6 User interface Pin No. Signal Name Direction Function 11 BOOT_OK Modem booting end / Modem Wake Up 12 MSG Received emergency message from center 27 96H_END Signified in 96 hours standby mode ending 28 RESET_IN- Modem Hardware reset input 30 ACC_ON_SLEEP Modem Power ON / Modem Power Sleep Table 5. User interface Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. 4. Electrical specification 4.1 Power supply specification Modem power(V_BATT) should be provided DC3.8V ± 0.1V, 2.0A. Modem power is provided according to inner function and per block using DC regulated circuit. It is controlled with each power depending on the mechanism to reduce power consumption to a minimum. PA is used directly V_BATT because of a lot of power input power source. Thus, It can be resulted in breakage of PA in excess of the rated input power. In addition, surge and ESD should be designed to block the influx in order to prevent damage to the modem. Pin No. Signal Name Direction MIN TYP MAX 32, 33 V_BATT 3.7V 3.8V 3.9V Table 6. Power supply specification Copyright ⓒ. 2014. All Rights Reserved. 4. Electrical specification 4.2 Logic level specification 4.2.1 Digital logic level specification Basic interface level : CMOS 1.8V Table 7. Digital logic level specification Copyright ⓒ. 2014. All Rights Reserved. 5. RF specification 5.1 CDMA 5.1.1 Receiver .- Bandwidth : 1.25MHz .- Frequency : 869MHz – 894MHz (BC0), 1930MHz – 1990MHz (BC1) .- RF to Baseband Direct conversion (Zero IF) .- Modulation method : QPSK, 8PSK and 16QAM .- Sensitivity : ≤-104dBm (BER = Under 0.5%) 5.1.2 Transmitter .- Frequency: 824MHz – 849MHz (BC0), 1850MHz – 1910MHz (BC1) .- Maximum RF Output : Power class3 (BC0), 23.01dBm ~ 26dBm Power class2 (BC1), 23.01dBm ~ 26dBm .- Modulation method : BPSK, QPSK AND 8PSK .- Baseband to RF Direct conversion (Zero IF) 5.2 LTE 5.2.1 Receiver .- Bandwidth : B4(20MHz), B13(10MHz) .- Frequency : 2110MHz – 2155MHz (B4), 746MHz – 756MHz (B13) .- RF to Baseband Direct conversion (Zero IF) .- Modulation method : QPSK, 16QAM and 64QAM .- 수신감도 : Main - B4 (≤-93.3dBm @QPSK), B13(≤-93.3dBm @QPSK) Diversity - B4 (≤-93.3dBm @QPSK), B13(≤-93.3dBm @QPSK) 5.2.2 Transmitter .- Frequency : B4 (1710MHz – 1755MHz), B13(777MHz – 787MHz) .- Maximum RF Output : Power class 3, 20.3dBm ~ 25.7dBm .- Modulation method : QPSK and 16QAM .- Baseband to RF Direct conversion (Zero IF) Copyright ⓒ. 2014. All Rights Reserved. 6. Mechanical specification 6.1 Mechanical dimensions Dimensions 93.15 x 45.0 x 7.6 mm Weight 45 grams(max.) Modem Interface connector KM17E-40DS (Vendor : HIROSE) Modem Antenna Connector (Plug) Main Antenna : KR15006-DD (Vendor : KET) Diversity Antenna : KR15003-SG (Vendor : KET) Table 8. Mechanical specification Figure 2. Mechanical dimension Copyright ⓒ. 2014. All Rights Reserved. 6. Mechanical specification 6.1 Environment specification .- Storage Temp : -40℃ ~ +85℃ .- Operating Temp : -20℃ ~ +70℃ (-20℃ ~ +70℃ : 3GPP specifications are satisfied -30℃~-20℃, +70℃~+80℃ : It can be performance degradation) .- Operating humidity : 80% (60℃) relative humidity Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.1 CDMA electrical specification CHANNEL Test item 4.4.5 4.5.1 4.4.6 4.3.4 4.4.4 4.4.2 4.4.1 3.5.1 Spec. 1011/25 384/600 779/1175 23.01~26dBm PASS PASS PASS 885 kHz to 1.98 MHz -42 dBc↓/30 kHz PASS PASS PASS 1.98 MHz to 4.00 MHz -54 dBc↓/30 kHz (BC0) -50 dBc↓/30 kHz (BC1) PASS PASS PASS -50dBm↓ PASS PASS PASS Rho 0.94 ~1.00 PASS PASS PASS Freq_E +/-300.00Hz(BC0) +/-150.00Hz(BC1) PASS PASS PASS Time_E -1.00~1.00 us PASS PASS PASS up @ Full rate 24↑ PASS PASS PASS down @ Full Rate -24↓ PASS PASS PASS up @ Half rate 24↑ PASS PASS PASS down @ Half Rate -24↓ PASS PASS PASS up @ Quarter rate 24↑ PASS PASS PASS down @ Quarter Rate -24↓ PASS PASS PASS up @ Eighth rate 24↑ PASS PASS PASS down @ Eighth Rate -24↓ PASS PASS PASS PASS PASS PASS PASS Open Loop Power Upper -57.50~-38.50(BC0) -60.50~-41.50(BC1) PASS PASS PASS Open Loop Power Mid -17.50~1.50(BC0) -20.50~-1.50(BC1) PASS PASS PASS Open Loop Power Sense 10.50~29.50(BC0) 10.50~29.50(BC1) PASS PASS PASS 0.5%↓ PASS PASS PASS Maximum Output Power Conducted Spurious Emissions Minimum Controlled Output Power Waveform Quality Range of Closed Loop Power Control Time Response of Open Loop Control Range of Open Loop Power Reference Sensitivity Level(-104/-25) Table 9. CDMA RF specification Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.2 LTE B4(20M) electrical specification Channel 시험 항목 Spec. Test Temperature 2050 2175 2300 6.2.2 Maximum Output Power(class 3) 23±2.7dBm Normal, Temp L, Temp H PASS PASS PASS 6.3.2 Minimum Output Power -39dBm ↓ Normal, Temp L, Temp H PASS PASS PASS 6.5.1 Frequency Error ±0.1ppm Normal, Temp L, Temp H PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 6.5.2.1 6.5.2.2 6.5.2.4 6.6.1 6.6.2.1 6.6.2.3 7.3 7.4 Error Vector Magnitude(EVM) Relative Carrier Leakage Power EVM equalizer spectrum flatness Adjacent Channel Leakage Power Ratio (ACLR) Reference Sensitivity Level @ 20MHz Maximum Input Level 12.5%↓ (16QAM) Carrier Leakage (3.2dBm ± 3.2dB) -27.2 dBc Carrier Leakage (-26.8dBm ± 3.2dB) -19.2 dBc Carrier Leakage (-36.8dBm ± 3.2dB) -9.2 dBc EVM equalizer spectrum flatness Range1 5.4 dB ↓ EVM equalizer spectrum flatness Range2 9.4 dB ↓ Occupied Bandwidth (OBW) Spectrum emission mask 17.5%↓ (QPSK) 20 MHz ↓ Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Spectrum Emission Mask upper/lower Area 1 -19.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 2 -8.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 3 -11.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 4 -23.5 dBm ↓ PASS PASS PASS ACLR E-UTRA ± -29.2dB ↓ PASS PASS PASS ACLR UTRA Offset 1 ± -32.2dB ↓ PASS PASS PASS ACLR UTRA Offset 2 ± -35.2dB ↓ PASS PASS PASS Main Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS Div. Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS throughput shall be ≥ 95% -25.7 dBm PASS PASS PASS Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Table 10. LTE B4(20M) RF specification Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.3 LTE B13(10M) electrical specification Channel 시험 항목 Spec. Test Temperature 2050 2175 2300 6.2.2 Maximum Output Power(class 3) 23±2.7dBm Normal, Temp L, Temp H PASS PASS PASS 6.3.2 Minimum Output Power -39dBm ↓ Normal, Temp L, Temp H PASS PASS PASS 6.5.1 Frequency Error ±0.1ppm Normal, Temp L, Temp H PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 6.5.2.1 6.5.2.2 6.5.2.4 6.6.1 6.6.2.1 6.6.2.3 7.3 7.4 Error Vector Magnitude(EVM) Relative Carrier Leakage Power EVM equalizer spectrum flatness Adjacent Channel Leakage Power Ratio (ACLR) Reference Sensitivity Level @ 10MHz Maximum Input Level 12.5%↓ (16QAM) Carrier Leakage (3.2dBm ± 3.2dB) -27.2 dBc Carrier Leakage (-26.8dBm ± 3.2dB) -19.2 dBc Carrier Leakage (-36.8dBm ± 3.2dB) -9.2 dBc EVM equalizer spectrum flatness Range1 5.4 dB ↓ EVM equalizer spectrum flatness Range2 9.4 dB ↓ Occupied Bandwidth (OBW) Spectrum emission mask 17.5%↓ (QPSK) 10 MHz ↓ Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Spectrum Emission Mask upper/lower Area 1 -16.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 2 -8.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 3 -11.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 4 -23.5 dBm ↓ PASS PASS PASS ACLR E-UTRA ± -29.2dB ↓ PASS PASS PASS ACLR UTRA Offset 1 ± -32.2dB ↓ PASS PASS PASS ACLR UTRA Offset 2 ± -35.2dB ↓ PASS PASS PASS Main Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS Div. Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS throughput shall be ≥ 95% -25.7 dBm PASS PASS PASS Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Table 11. LTE B13(10M) RF specification Copyright ⓒ. 2014. All Rights Reserved. 8. Connector 8.1 Antenna Connector(Main): KR15006-DD (Vendor : KET) Copyright ⓒ. 2014. All Rights Reserved. 8. Connector 8.2 Antenna Connector(Div.) KR15003-SG (Vendor : KET) Copyright ⓒ. 2014. All Rights Reserved. 8. Connector 8.3 40Pin Connector : KM17E-40DS (Vendor : HIROSE) Copyright ⓒ. 2014. All Rights Reserved. 9. RFx Information The RF field strength of the wireless module or modules that may be embedded in your TCU is well all international RF exposure limits as known at this time. Because the wireless modules(which may be embedded into your TCU) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these modules are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This module should be used more than 20cm(8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this module may not cause interference , (2) this module must accept any interference that may cause undesired operation. 10.1 Information for integrator The integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by integrators for end users must include the following information in a prominent location. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Label for end product must include contains FCC ID : YZP-VL1000 or A RF transmitter inside, FCC ID : YZP-VL1000 Copyright ⓒ. 2014. All Rights Reserved. 10. FCC Approval This Module complies with parts 22, 24, 27 of the FCC rules. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This module should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. This module may not be co-located with any other transmitters or antennas. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the table below. Band Frequency Range [MHz] Maximum Antenna Gain[dBi] CDMA(Cellular) 824.70~848.31 5.50 CDMA(PCS) 1851.25~1908.75 7.00 LTE(B13) 779.50~874.50 5.31 LTE(B4) 1710.70~1754.30 4.29 The satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: YZP-VL1000 Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or codification is made. Note: If this module is intended for use in a portable device, additional testing will be required to satisfy RF Exposure, including SAR requirements of FCC Part 2.1093. Copyright ⓒ. 2014. All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Has XFA : No Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : 슬라이드 1 Create Date : 2015:03:24 17:54:45+09:00 Creator Tool : Microsoft® PowerPoint® 2010 Modify Date : 2015:04:15 11:33:16+09:00 Metadata Date : 2015:04:15 11:33:16+09:00 Producer : Microsoft® PowerPoint® 2010 Document ID : uuid:a4033242-de5d-4713-adb9-ff8bdb2d0a03 Instance ID : uuid:369f0e83-5f25-4ef0-8e89-43f9b2503a53 Page Count : 20 Author : AdministratorEXIF Metadata provided by EXIF.tools