LG Innotek VL2000 Telematics Modem User Manual 1
LG Innotek Co., Ltd. Telematics Modem 1
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2582405 |
| Application ID | pUk9dhe7IeJgm9sEY+2NYA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.81kB (610083 bits) |
| Date Submitted | 2015-04-09 00:00:00 |
| Date Available | 2015-10-06 00:00:00 |
| Creation Date | 2015-04-02 08:47:28 |
| Producing Software | Microsoft® PowerPoint® 2010 |
| Document Lastmod | 2015-04-13 18:06:58 |
| Document Title | 슬ë¼ì´ë“œ 1 |
| Document Creator | Microsoft® PowerPoint® 2010 |
| Document Author: | Administrator |
User Guide for LTD-VL2000 (Eagle) Product : LTE/CDMA(EVDO) Wireless Modem Model name : LTD-VL2000 Table of Contents 1. Overview 2. Major feature 3. Interface 4. Electrical specification 5. RF specification 6. Mechanical specification 7. General specification 8. Connector 9. RFx information 10. FCC Approval Copyright ⓒ. 2014. All Rights Reserved. 1. Overview The LTD-VL2000 is achieved as personal mobile communication devices of the compact radio equipment, the latest design of the parts becoming smaller, lighter weight having the LTE(700/1700MHz), CDMA(850/1900MHz) bands. It is the vehicle’s telematics system that connect with LTE and CDMA(EVDO) wireless network and the wireless module with voice and data communication. It can be operated at land, rivers, and other similar areas. On LTE operating mode, It can be communicated with uplink 50Mbps, downlink up to 100Mbps data transfer speed such as a movie or a video call. It may be able to receive large amounts of data. Standard RS-232 port and USB port communicating with the host system via AT-command or control commands can be used to send data. Voice calls are possible. Copyright ⓒ. 2014. All Rights Reserved. 2. Major feature Dimension Weight Mechanical 86.2(L) x 78.1(W) x 7.0(T) mm 48g(max) Interface USB, General Purpose I/O pins Antenna FAKRA Connector Temperature * Operation : -20℃ ~ +70 ℃ Storage : -40 ℃ ~ +85 ℃ Main Chipset MDM 9615 Memory 2048Mb(NAND) / 1024Mb(SDRAM) Standard 3GPP Rel.9 LTE - DL Speed : 100 Mbps(20M bandwidth) - UL Speed : 50 Mbps(20M bandwidth) 3GPP2 CDMA 1X, EVDO Rev.A - DL Speed : 3.1 Mbps - UL Speed : 1.8 Mbps Technology Band LTE B4, B13 CDMA 850(Cellular), 1900 (PCS) GPS Not Supported Power LTE : Typ. 23dBm(Power Class 3) CDMA : Typ. 24dBm (Power Class 3) DC Power 12V Functions Voice, Data, SMS ETC Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.1 Pin output Customer P/N is connected with outer device using 40 pin connector Figure 1. Connector pin arrangement Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.2 Pin description Signal Name Type Pin USB USB-NAD_D+ USB-NAD_DUSB_POW_ON USB-GND IO IO 13 14 11 12 USB Differential data line (+) USB Differential data line (-) Control line USB Power Supply USB-Ground internal connected to GND Audio PCM D_Audio_NAD_SCLK D_Audio_NAD_LRCK D_Audio_NAD_SDTI D_Audio_NAD_SDTO 23 24 25 26 PCM Interface bit clock line PCM Interface frame clock line PCM Interface digital audio data in PCM Interface digital audio data out NAD_OnOff NAD_Reset NAD_Status PowerOn_Off HWakeUp 15 16 10 17 Control line to power on or off the module Control line to unconditionally restart the module Indicates the power state of the module Control line to switch on the power supply of LGIT-M. Optional Control line to switch on host. KL30 (12V) GND 1,3,5,7 2,4,6,8 User Interface Power NC RESERVED Description Power supply input (+) Power supply input (-) 18,27,28, 29,30,31, 32,33,34, Reserved pins. Please leave the pins unconnected 35,36,37, 38,39,40 Table 1. Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.3 USB It is supported with universal serial bus for high data communication. And It is satisfied with USB2.0 specification and supported with max.480Mbps Pin NO. Signal Name Pin I/O (Modem host) Function Description 13 USB-NAD_D+ IO USB Differential data line (+) 14 USB-NAD_D- IO USB Differential data line (-) 11 USB_POW_ON Control line USB Power Supply 12 USB-GND USB-Ground internal connected to GND Table 2. USB Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. 3. Interface 3.4 Audio This module is provided with PCM interface. The resistor of pulled-up or pulled-down in this pin must be over 50Kohm. Pin NO. Signal Name Pin I/O (Modem host) Function Description 23 D_Audio_NAD_SCLK PCM Interface bit clock line 24 D_Audio_NAD_LRCK PCM Interface frame clock line 25 D_Audio_NAD_SDTI PCM Interface digital audio data in 26 D_Audio_NAD_SDTO PCM Interface digital audio data out Table 3. PCM Pin descriptions 3.5 User interface Pin No. Signal Name Direction Function 15 NAD_OnOff Turn on and off the module Active High NAD_Status Indicate the active status of module Active High 10 PowerOn_Off Supply the power of module Active High 17 HwakeUP Be used to wake up the host system Active Low 11 USB_Pow_On Communicate with USB device Active High Table 4. User interface Pin descriptions Copyright ⓒ. 2014. All Rights Reserved. 4. Electrical specification 4.1 Power supply specification A Module Power supply(KL30) is delivered on DC 12V, 1.5A from host system. In Module internal power supply, it is design for power management integral circuits to distribute constant voltages, and can control the each power block to minimize the power consumptions. In particular, PAM(power amplifier module) has much power consumption so it is supplied for directly 3.8V converted from KL30. Therefore it should be careful to input the supply power of PAM when the absolute rating is over. In addition, all of power input should be design with blocking and protecting high surge and ESD in NAD module. Pin No. Signal Name Direction MIN TYP MAX 1, 3, 5,7 KL30(V_BATT) 10.8V 12V 13.2V Table 5. Power supply specification Copyright ⓒ. 2014. All Rights Reserved. 4. Electrical specification 4.2 Logic level specification 4.2.1 Digital logic level specification Table 6. Digital logic level specification Copyright ⓒ. 2014. All Rights Reserved. 5. RF specification 5.1 CDMA 5.1.1 Receiver .- Bandwidth : 1.25MHz .- Frequency : 869MHz – 894MHz (BC0), 1930MHz – 1990MHz (BC1) .- RF to Baseband Direct conversion (Zero IF) .- Modulation method : QPSK, 8PSK and 16QAM .- Sensitivity : ≤-104dBm (PER = Under 0.5%) 5.1.2 Transmitter .- Frequency: 824MHz – 849MHz (BC0), 1850MHz – 1910MHz (BC1) .- Maximum RF Output : Power class3 (BC0), 23.01dBm ~ 25.5dBm Power class2 (BC1), 23.01dBm ~ 25.5dBm .- Modulation method : BPSK, QPSK AND 8PSK .- Baseband to RF Direct conversion (Zero IF) 5.2 LTE 5.2.1 Receiver .- Bandwidth : B4(1.4/3/5/10/15/20MHz), B13(5/10MHz) .- Frequency : 2110MHz – 2155MHz (B4), 746MHz – 756MHz (B13) .- RF to Baseband Direct conversion (Zero IF) .- Modulation method : QPSK, 16QAM and 64QAM .- Sensitivity : Main - B4 (≤-93.3dBm @QPSK), B13(≤-93.3dBm @QPSK) Diversity - B4 (≤-93.3dBm @QPSK), B13(≤-93.3dBm @QPSK) 5.2.2 Transmitter .- Frequency : B4 (1710MHz – 1755MHz), B13(777MHz – 787MHz) .- Maximum RF Output : Power class 3, 21.5dBm ~ 24.5dBm .- Modulation method : QPSK and 16QAM .- Baseband to RF Direct conversion (Zero IF) Copyright ⓒ. 2014. All Rights Reserved. 6. Mechanical specification 6.1 Mechanical dimensions Dimensions 86.2(L) x 78.1(W) x 7.0(T) mm Weight 48 grams(max.) Modem Interface connector ISMA-9827B-40Y955 (Manufacture vendor : IRISO) Modem Antenna Connector (Plug) 59S2DA-40MT5_D (Manufacture vendor : Rosenberger) Table 7. Mechanical specification Figure 2. Mechanical dimension Copyright ⓒ. 2014. All Rights Reserved. 6. Mechanical specification 6.1 Environment specification .- Storage Temp : -40℃ ~ +85℃ .- Operating Temp : -20℃ ~ +70℃ (-20℃ ~ +70℃ : 3GPP specifications are satisfied -30℃~-20℃, +70℃~+80℃ : It can be performance degradation) .- Operating humidity : 80% (60℃) relative humidity Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.1 CDMA electrical specification CHANNEL Test item 4.4.5 4.5.1 4.4.6 4.3.4 4.4.4 4.4.2 4.4.1 3.5.1 Spec. 1011/25 384/600 779/1175 23.01~25.5dBm PASS PASS PASS 885 kHz to 1.98 MHz -42 dBc↓/30 kHz PASS PASS PASS 1.98 MHz to 4.00 MHz -54 dBc↓/30 kHz (BC0) -50 dBc↓/30 kHz (BC1) PASS PASS PASS -50dBm↓ PASS PASS PASS Rho 0.94 ~1.00 PASS PASS PASS Freq_E +/-300.00Hz(BC0) +/-150.00Hz(BC1) PASS PASS PASS Time_E -1.00~1.00 us PASS PASS PASS up @ Full rate 24↑ PASS PASS PASS down @ Full Rate -24↓ PASS PASS PASS up @ Half rate 24↑ PASS PASS PASS down @ Half Rate -24↓ PASS PASS PASS up @ Quarter rate 24↑ PASS PASS PASS down @ Quarter Rate -24↓ PASS PASS PASS up @ Eighth rate 24↑ PASS PASS PASS down @ Eighth Rate -24↓ PASS PASS PASS PASS PASS PASS PASS Open Loop Power Upper -57.50~-38.50(BC0) -60.50~-41.50(BC1) PASS PASS PASS Open Loop Power Mid -17.50~1.50(BC0) -20.50~-1.50(BC1) PASS PASS PASS Open Loop Power Sense 10.50~29.50(BC0) 10.50~29.50(BC1) PASS PASS PASS 0.5%↓ PASS PASS PASS Maximum Output Power Conducted Spurious Emissions Minimum Controlled Output Power Waveform Quality Range of Closed Loop Power Control Time Response of Open Loop Control Range of Open Loop Power Reference Sensitivity Level(-104/-25) Table 9. CDMA RF specification Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.2 LTE B4(20M) electrical specification Channel 시험 항목 Spec. Test Temperature 2050 2175 2300 6.2.2 Maximum Output Power(class 3) 23±1.5dBm Normal, Temp L, Temp H PASS PASS PASS 6.3.2 Minimum Output Power -39dBm ↓ Normal, Temp L, Temp H PASS PASS PASS 6.5.1 Frequency Error ±0.1ppm Normal, Temp L, Temp H PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 6.5.2.1 6.5.2.2 6.5.2.4 6.6.1 6.6.2.1 6.6.2.3 7.3 7.4 Error Vector Magnitude(EVM) Relative Carrier Leakage Power EVM equalizer spectrum flatness Adjacent Channel Leakage Power Ratio (ACLR) Reference Sensitivity Level @ 20MHz Maximum Input Level 12.5%↓ (16QAM) Carrier Leakage (3.2dBm ± 3.2dB) -27.2 dBc Carrier Leakage (-26.8dBm ± 3.2dB) -19.2 dBc Carrier Leakage (-36.8dBm ± 3.2dB) -9.2 dBc EVM equalizer spectrum flatness Range1 5.4 dB ↓ EVM equalizer spectrum flatness Range2 9.4 dB ↓ Occupied Bandwidth (OBW) Spectrum emission mask 17.5%↓ (QPSK) 20 MHz ↓ Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Spectrum Emission Mask upper/lower Area 1 -19.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 2 -8.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 3 -11.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 4 -23.5 dBm ↓ PASS PASS PASS ACLR E-UTRA ± -29.2dB ↓ PASS PASS PASS ACLR UTRA Offset 1 ± -32.2dB ↓ PASS PASS PASS ACLR UTRA Offset 2 ± -35.2dB ↓ PASS PASS PASS Main Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS Div. Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS throughput shall be ≥ 95% -25.7 dBm PASS PASS PASS Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Table 10. LTE B4(20M) RF specification Copyright ⓒ. 2014. All Rights Reserved. 7. General specification 7.3 LTE B13(10M) electrical specification Channel 시험 항목 Spec. Test Temperature 2050 2175 2300 6.2.2 Maximum Output Power(class 3) 23±1.5dBm Normal, Temp L, Temp H PASS PASS PASS 6.3.2 Minimum Output Power -39dBm ↓ Normal, Temp L, Temp H PASS PASS PASS 6.5.1 Frequency Error ±0.1ppm Normal, Temp L, Temp H PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 6.5.2.1 6.5.2.2 6.5.2.4 6.6.1 6.6.2.1 6.6.2.3 7.3 7.4 Error Vector Magnitude(EVM) Relative Carrier Leakage Power EVM equalizer spectrum flatness Adjacent Channel Leakage Power Ratio (ACLR) Reference Sensitivity Level @ 10MHz Maximum Input Level 12.5%↓ (16QAM) Carrier Leakage (3.2dBm ± 3.2dB) -27.2 dBc Carrier Leakage (-26.8dBm ± 3.2dB) -19.2 dBc Carrier Leakage (-36.8dBm ± 3.2dB) -9.2 dBc EVM equalizer spectrum flatness Range1 5.4 dB ↓ EVM equalizer spectrum flatness Range2 9.4 dB ↓ Occupied Bandwidth (OBW) Spectrum emission mask 17.5%↓ (QPSK) 10 MHz ↓ Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Spectrum Emission Mask upper/lower Area 1 -16.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 2 -8.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 3 -11.5 dBm ↓ PASS PASS PASS Spectrum Emission Mask upper/lower Area 4 -23.5 dBm ↓ PASS PASS PASS ACLR E-UTRA ± -29.2dB ↓ PASS PASS PASS ACLR UTRA Offset 1 ± -32.2dB ↓ PASS PASS PASS ACLR UTRA Offset 2 ± -35.2dB ↓ PASS PASS PASS Main Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS Div. Ref Sense throughput shall be ≥ 95% -93.3 dBm PASS PASS PASS throughput shall be ≥ 95% -25.7 dBm PASS PASS PASS Normal Normal, Temp L, Temp H Normal, Temp L, Temp H Normal Table 11. LTE B13(10M) RF specification Copyright ⓒ. 2014. All Rights Reserved. 8. Connector 8.1 Antenna Connector : 59S2DA-40MT5_D (Vendor : Rosenberger) Copyright ⓒ. 2014. All Rights Reserved. 8. Connector 8.2 40Pin Connector : ISMA-9827B-40Y955 (Vendor : IRISO) Copyright ⓒ. 2014. All Rights Reserved. 9. RFx Information The RF field strength of the wireless module or modules that may be embedded in your TCU is well all international RF exposure limits as known at this time. Because the wireless modules(which may be embedded into your TCU) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these modules are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This module should be used more than 20cm(8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this module may not cause interference , (2) this module must accept any interference that may cause undesired operation. 10.1 Information for integrator The integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by integrators for end users must include the following information in a prominent location. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Label for end product must include contains FCC ID : YZP-VL2000 or A RF transmitter inside, FCC ID : YZP-VL2000 Copyright ⓒ. 2014. All Rights Reserved. 10. FCC Approval This Module complies with parts 22, 24, 27 of the FCC rules. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This module should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. This module may not be co-located with any other transmitters or antennas. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the table below. Band Frequency Range [MHz] Maximum Antenna Gain[dBi] CDMA(Cellular) 824.70~848.31 6.00 CDMA(PCS) 1851.25~1908.75 7.50 LTE(B13) 777.00 ~784.50 6.49 LTE(B4) 1710.70~1754.30 5.49 The satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: YZP-VL2000 Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or codification is made. Note: If this module is intended for use in a portable device, additional testing will be required to satisfy RF Exposure, including SAR requirements of FCC Part 2.1093. Copyright ⓒ. 2014. All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Administrator Create Date : 2015:04:02 08:47:28+09:00 Modify Date : 2015:04:13 18:06:58+09:00 Has XFA : No Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : 슬라이드 1 Creator Tool : Microsoft® PowerPoint® 2010 Metadata Date : 2015:04:13 18:06:58+09:00 Producer : Microsoft® PowerPoint® 2010 Document ID : uuid:b1098808-d2d1-4258-adbb-1a9ecca7e91c Instance ID : uuid:e1c8e6d0-33ba-468b-9242-06dcdefdc328 Page Count : 19EXIF Metadata provided by EXIF.tools