LIDL US HG734TX Wireless Bike Computer (Transmitter) User Manual 286004 cri Fahrradcomputer 660x444mm US indd

Lidl US Trading, LLC Wireless Bike Computer (Transmitter) 286004 cri Fahrradcomputer 660x444mm US indd

User Manual

US-ENUS-EN US-EN US-EN US-EN US-EN US-EN US-EN US-ENUS-EN US-EN US-EN US-EN US-EN US-EN US-EN US-ENUS-ENUS-ENUS-ENUS-ENUS-EN US-EN US-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-ENUS-EN US-EN US-EN US-EN US-EN US-EN US-EN US-ENUS-ENUS-ENUS-ENHow does state law relate to this warranty? Any State Laws that contradict or modify the warranty listed here to the consumer’s benefi t will be followed.· Call customer service at 1 (844) 543-5872 · Visit the Website Customer Service Platform at www.lidl.com/contact-us · Visit a LIDL store for further assistance To ensure the quickest warranty return process, please have the following available: · The original sales receipt that includes the date purchased; · The product and manual in the original package; · A statement of the problem. What must you do to keep the warranty in effect? · Retain the original receipt; · Follow all product instructions; · Do not repair or modify the product. US-ENUS-ENUS-EN· Improper use or transport; · Disregarding safety and maintenance instructions; · Accidents or acts of nature (e.g. lightning, fi re, water, etc.). · Tampering with the product (such as removing cover, unscrewing screws etc.) What is the period of coverage and warranty resolution? The warranty is for 3 years from the date of purchase. At our discretion, product will either be refunded or replaced. What will we not do? We will not: · Start a new warranty period upon product exchange; · We will not repair product.How to process the warranty? We recommend fi rst either: Never throw batteries in the garbage. They may contain toxic heavy metals and must be handled as special waste. The chemical symbols of heavy met-als are: Cd = cadmium, Hg = mercury, Pb = lead. Used batteries should therefore be disposed of through a local collection point. WarrantyWhat does this warranty cover? The warranty covers: · Damage, breakage or inoperability due to defect. · Damage not accounted for by normal wear and tear or following the safety and maintenance instructions provided in the user manual. What is not covered by the warranty? The warranty does not cover damage caused by: · Normal wear and tear of the product, including fragile parts (such as switches, glass, etc.); Disposal Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations.Contact your local waste management authority for additional information on how to dispose of the used product.To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not throw in the garbage. Infor-mation on collection sites and their opening hours is available from your local authority.Improper disposal of batteries can damage the environment! Cleaning and care Do not use any liquids or cleaning agents for cleaning. Otherwise there is a risk of damaging the product. The product should only be cleaned on the outside with a soft, dry cloth. Maintenance Remove the battery when the product will not be used for longer period of time. Check regularly the cable and components for any damage and safe fi t.US-ENUS-ENProblem SolutionSpeed or distance are not displayed.Adjust magnet and sensor correctly. - Check that the battery is inserted with the poles arranged the right way round.Display is black The ambient temperature is too high or the bike computer was exposed to direct sunlight for too long. Remove product from direct sunlight and let it cool off for a while.The LC-display shows irregular symbols.Remove battery and replace it again.US-ENUS-ENUS-EN- If errors occur in the display, remove any such prod-ucts from the vicinity of the product. In the case of such malfunctions, remove the battery briefl y and then reinsert again.Problem SolutionEmpty LC-display or no response after putting the batteries in againRemove battery. Insert a sharp object (e.g. screwdriver) into the hole marked with “RESET”. Insert a 3 V battery into the battery compartment in such a way that the + terminal points upwards. Replace the battery cover on the battery compart-ment. The microprocessor is reset and restarted. To close the battery compartment cover, use a coin to assist you to turn the battery compartment cover in clockwise direction. Press any button and keep it pressed to return to normal operating mode. Note: Once the battery is removed, all stored data will be erased after approx. 20 seconds. Removing the bike computer from the bike Turn the bike computer anticlockwise to detach the bike computer. Cut off the protruding tails of the cable ties 2 with a suitable tool such as diagonal pliers. TroubleshootingNote: This product has delicate electronic compo-nents. Therefore interference may occur when it is near products which transmit radio signals. Changing the batteriesNote: The battery of the bike computer must be replaced when the battery state indicator 19 appears on the LC display 13 . Press the MODE button 14 and the SET button 15 at the same time and keep them pressed until the battery symbol and {{----}} appears in the LC display 13 . To replace the battery, proceed as shown in fi gure A. To open the battery compartment cover, use a coin to assist you to turn the battery compart-ment cover in anti-clockwise direction. Take out the old battery and replace with a new battery. Make sure you fi t the battery the right way round (polarity). This is shown inside the battery com-partment. Adjust the sealing ring before inserting the battery. Resetting the bike computer Press the MODE button 14 and + button 22 at the same time and keep them pressed until RESET appears in the LC display 13 . Now press the SET button 15 . This allows you to adjust the previously set basic setting data (language, age, weight, time). The rest of the stored data will be deleted. Using the backlight Press the SET button 15 to switch on the back-light temporarily. The backlight automatically extinguishes after a short period. CUSTOMIZE modeApart from the ADVANCE and EASY mode, you can make your individual adjustments in the CUSTOMIZE mode (see procedure). Press the Set button 15 to enter the CUSTOMIZE mode. Note: By repeatedly pressing the + button 22 and – button 21 , you can toggle between the ADVANCE and EASY mode. In the EASY mode, press and hold the SET button 15 . Press the + button 22 and – button 21 to switch the settings on or off (e.g. time). Choose “On”, to add the chosen adjustment to the EASY modes. Choose “Off “, if you do not want to add the adjustments. Press the SET button 15 , to confi rm your entry. Repeat this process for another function. Press the SET button 15 enter the setting process. Press the + button 22 and – button 21 repeat-edly until the desired symbol is shown. Press the MODE button 14 to move on to setting the timer and press the + button 22 and – but-ton 21 repeatedly until the desired number appears as the fi rst digit. Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 and press the MODE button 14 back to current page.SCAN: ScanNote: The scan mode automatically switches between the trip distance, highest speed, average speed and trip time displays. Note: Refer to the section on “Basic settings” to see how you make or change settings. Note: To turn off the SCAN function, press the + button 22 to return to clock mode.counting forwards or backwards (+ or - respec-tively) and 5-digit number. Press the SET button 15 for edit. Press the + button 22 and – button 21 repeat-edly until the desired symbol is shown. Press the MODE button 14 to move on to set-ting the distance on the odometer and press the + button 22 and – button 21 repeatedly until the desired number appears as the fi rst digit. Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 and press the MODE button 14 back to current page.TIME: Timer Press the SET button 15 and keep it pressed for 3 seconds to change the timer settings. The LC display shows the symbol for counting for-wards or backwards (+ or - respectively) and 5-digit number. Press the SET button 15 again to stop the stop-watch. Press the SET button 15 and keep it pressed for 3 seconds to reset the stopwatch to 0.CAL RATE: Current calorie consumptionCALORIE: Calorie meter Press the SET button 15 and keep it pressed for 3 seconds to reset the calorie counter to 0.FAT-BURN: Fat burning in grams Press the SET button 15 and keep it pressed for 3 seconds to reset the fat burning value to 0.CO2 KG: CO2 Saving: Press the SET button 15 and keep it pressed for 3 seconds to access the CO2 saving refer-ence value.KM: Odometer Press the SET button 15 and keep it pressed for 3 seconds to change the odometer settings. The LC display 13 shows the symbol for Press the SET button 15 and keep it pressed for 3 seconds to reset the maximum speed dis-play to 0.AVGSPEED: Average speed Press the SET button 15 and keep it pressed for 3 seconds to reset the average speed dis-play to 0.TEMP: Thermometer Press the SET button 15 and keep it pressed for 3 seconds to switch between °C and °F. Press the SET button 15 to display the highest temperature (HI) measured so far. Press the SET button 15 again to display the lowest temperature (LO) measured so far. Press the SET button 15 and keep it pressed while the highest or lowest temperature is dis-played to switch back to the current tempera-ture to reset the saved data.STPWATCH: Stopwatch Press the SET button 15 to start the stopwatch. Using functionsNote: All the functions and secondary functions are described in the following list.CLOCK: Displays the time Press the SET button 15 and keep it pressed for 3 seconds to access the time settings. TOTALODO: Total odometer Press the SET button 15 and keep it pressed for 3 seconds to access the wheel size settings, total distance and servicing interval. TOTAL-TM: Total time cycling Press the SET button 15 and keep it pressed for 3 seconds to make changes to the saved total time cycling. TRIPDIST: Trip distance Press the SET button 15 and keep it pressed for 3 seconds to reset the trip distance, the average speed and the trip time displays to 0.MAXSPEED: Maximum speedany vibration made to reactivate the computer. The function indicator 11 shows the current mode. Press the + button 22 or MODE button 14 repeatedly to page through the various modes. Press the SET button 15 to change into the sec-ondary function for any function. Press the SET button 15 and keep it pressed to call or reset up any saved values.The bike computer has the following functions:ADVANCE mode: CLOCK > TOTALODO > TOTAL-TM > TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIME > TEMP > STPWATCH > CAL RATE > CALORIE > FAT-BURN > CO2 KG > KM+/- > TIME+/- > SCANEASY mode:Press the MODE button 14 you can choose function display:TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIMEYou have now completed the basic settings. If you want to change the basic setting data, follow the steps in “Resetting the bike computer” section and reset all basic setting data again. Connect the bike computer and sensorUse the magnet 1 to trigger the sensor 6, the speed tendency indicator 20 will show a graph to indicate a successful connection. Now the bike computer 8 is ready for use. If connection fails, follow the steps in “Changing the batteries” section and reset all basic setting data again.You will need to re-connect the bike computer 8 and sensor 6 again. Using the bike computer Note: If the bike computer remains unused for more than 5 minutes, it automatically switches into the stand-by mode. Press any button or Note: You have the choice of 0-620.75 miles (0–999 km) or miles. After the setting is confi rmed, the bike computer will count the trip distance. When the servicing interval indicator 18 shows on LC display, you need to check the condition of your bike (wear, adjustment of brakes, etc.). Then press the down button 21 to reset the service interval and this indicator to disappear. The bike computer will start counting the trip distance again. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the unit of temperature and press the SET button 15 for edit. Press the + button 22 or – button 21 repeat-edly until °C or °F appears in the LC display. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to close the setting page. Press the MODE button 14 to move to CO2 saving. A three-digit number appears in the LC display. Press the SET button 15 for edit and press the + button 22 and – button 21 repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by press-ing the MODE button 14 . Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the ser-vicing interval. A three-digit number appears in the LC display. Press the SET button 15 for edit and press the + button 22 or – button 21 repeatedly until the desired number of units of distance to your next intended bicycle servicing (servicing interval indicator 18 ) appears in the LC display. Confi rm your choice by pressing the MODE button 14 . Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the time format and press the SET button 15 for edit. Press the + button 22 or – button 21 repeat-edly until 12 Hr (12-hour format) or 24 Hr (24-hour format) appears in the LC display. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the clock. A four-digit number appears in the LC display. Press the SET button 15 for edit and press the + button 22 or – button 21 repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE button 14 . Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 .the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE button 14 . Repeat this process for the remain-ing digit. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the unit of weight and press the SET button 15 for edit. Press the + button 22 or – button 21 repeatedly until SET KG or SET LB appears in the LC display. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to weight. A three-digit number appears in the LC display. Press the SET button 15 for edit and press the + button 22 or – button 21 repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by pressing the MODE button 14 . Repeat this process for all the remaining digits.the MODE button 14 . Repeat this process for all the remaining digits. Confi rm your choice by pressing the SET button 15 . Note: You can calculate your tyre circumfer-ence (U) by multiplying your tyre diameter (D) by 3.1416 (Fig. M). The list (Fig. N) contains the tyre circumferences (U) of the most common tyre diameters (D). Press the MODE button 14 to move to the unit of distance and press the SET button 15 for edit. Press the + button 22 or – button 21 repeatedly until SET KM KMH or SET MILE MPH appears in the LC display. Confi rm your choice by pressing the SETbutton 15 . Press the MODE button 14 to move to the age. A two-digit number appears in the LC display. Press the SET button 15 for edit and press the + button 22 or – button 21 repeatedly until Press the Set button 15 for edit. Press the + button 22 or – button 21 repeatedly until the desired language appears. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the user profi le and press the SET button 15 for edit. Press + button 22 or – button 21 repeatedly until the desired user profi le (ADVANCE or EASY) appears. Confi rm your choice by pressing the SET button 15 . Press the MODE button 14 to move to the wheel size (SET WS). A four-digit number appears in the LC display. Now enter the tyre circumference of your wheel in mm. Press the SET button 15 for edit and press + button 22 or – button 21 repeatedly until the desired number appears as the fi rst digit. Confi rm your choice by pressing Note: Make sure that the bike computer 8 is attached with less than 27.56 in (70 cm) distance to the sensor 6. Fix the bike computer 8 to the sen-sor 6 within a 30 ° angle as shown in Fig. B. Preparing for use Basic settingsBasic setting: Language > User profi le > Wheel size > Unit of distance and speed > Age > Unit of weigh > Weight > Time format > Time > CO2 saving > Servicing interval > Unit of temperatureKey functions: MODE button for selection / + button 22 or – button 21 for setting values / SET button for edit and confi rmationNote: The LC display 13 comes on automatically approx. 2 seconds after the battery 3 is inserted. You are immediately off ered a choice of languages. Inserting the battery To insert the battery 3, proceed as shown in Fig. A. To open the battery compartment cover, use a coin to assist you to turn the battery compartment cover in anti-clockwise direction. Make sure you fi t the battery the right way round (polarity). This is shown on the back side of the product. To close the battery compartment cover, use a coin to assist you to turn the battery compart- ment cover in clockwise direction. Scan the QR code with your smartphone and watch the video to fi nd out how to assem-ble the product. Attaching the bike computer To attach the product, proceed as shown in Figs. B to I.batteries from the product immediately.SAVE THESE INSTRUCTIONS Before useNote: Remove all packaging materials from the product.Remove the protective foil from the LC display 13 before fi rst use.Note: This product is not recommended to use with E-bikes. Interference from the motor may aff ect the performance of the product.according to polarity marks (+) and (-) on the battery / rechargeable battery and the product. Clean the contacts on the battery / recharge-able battery and in the battery compartment before inserting! Remove exhausted batteries / rechargeable Remove batteries / rechargeable batteries if the product will not be used for a longer period.Risk of damage of the product Only use the specifi ed type of battery / rechargeable battery! Insert batteries / rechar-geable batteries In the event of a leakage of batteries / rechargeable batteries, immediately remove them from the prod-uct to prevent damage. Only use the same type of batteries / recharge-able batteries. Do not mix used and new bat-teries / rechargeable batteries.and seek immediate medical attention. WEAR PROTEC-TIVE GLOVES! Leaked or damaged bat-teries / rechargeable bat-teries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.temperatures, which could aff ect batteries / recharge-able batteries, e.g. radi-ators / direct sunlight. Avoid contact with the skin, eyes and mucous membranes. In the event of contact with battery acid, thoroughly fl ush the aff ected area with plenty of clean water Never throw batteries / rechargeable batteries into fi re or water. Do not exert mechanical loads to batteries / rechargeable batteries.Risk of leakage of batteries / recharge-able batteries Avoid extreme environ-mental conditions and DANGER OF EXPLOSION! Never recharge non-re-chargeable batteries. Do not short-circuit bat-teries / rechargeable batteries and / or open them. Overheating, fi re or bursting can be the result. Safetyinstructions for batteries / rechargeable batteries DANGER TO LIFE! Keep batteries / recharge-able batteries out of reach of children. If accidentally swallowed seek immedi-ate medical attention.non-observance of theoperating instructionsand safety advice orunauthorised use.The RF Exposure Com-pliance distance is 20mm. (2) this product must accept any interference received, including inter-ference that may cause undesired operation. Please note that the warranty does not cover damage arising from improper treatment, • Consult the dealer or an experienced radio / TV technician for help. This product complies with part 15 of the FCC Rules. Operation is sub-ject to the following two conditions: (1) This product may not cause harmful interfer-ence, andby one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a dif-ferent circuit from the circuit the receiver is connected to.interference will not occur in a particular installation. If this prod-uct causes harmful inter-ference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try and correct the interference interference in a residen-tial installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that compliance could void the user‘s authority to operate the product. Note: This product has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful person responsible for their safety. Children should be supervised to ensure that they do not play with the product. Changes or modifi ca-tions to this product not expressly approved by the party responsible for This product is not intended for use by persons (includ-ing children) with reduced physical, sensory or men-tal capabilities, or lack of experience and knowl-edge, unless they have been given supervision or instruction concerning use of the product by a IMPORTANT SAFETY INSTRUCTIONSREAD ALL INSTRUCTIONS. KEEP FOR FUTURE REFER-ENCE. IF PASSING THIS PRODUCT ON TO A THIRD PARTY ALSO INCLUDE ALL DOCUMENTS.Model: HG00734A-TX, HG00734B-TXFCC-ID: 2AJ9O-HG734TXModel: HG00734A-RX, HG00734B-RX Included items1 Bike computer1 Bracket for bike computer1 Cushion for bike computer bracket1 Bracket with sensor1 Magnet6 Cable ties2 Batteries 3 V (Direct current), type CR2032 button cell2 Spare seal ring for bike computer and sensor1 Operating instructions16 Speed comparison indicator: Compares your current speed against the average speed ▲ higher than your average speed ▼ lower than your average speed17 SCAN indicator18 Servicing interval indicator19 Battery state indicator20 Speed tendency indicator: Indicates speed trend Acceleration – anticlockwise rotation Deceleration – clockwise rotation21 Down button (-)22 Up button (+) Technical dataBattery: 3 V (Direct current)(CR2032 button cell)Operating temperature: 0–122 °F (0–50 °C)IP44 (splash proof): Suitable for wet locations– Scan indicator (functions displayed in continuous loop)– Backlight Description of parts1 Magnet2 Cable tie3 Battery4 Cushion for bike computer bracket5 Bracket6 Sensor7 Bike computer’s battery compartment cover8 Bike computer9 Sensor battery compartment cover10 Primary function value display11 Function indicator12 Secondary function value display13 LC display14 MODE button (M)15 SET button (S) Functions– Menu languages: GB, DE, FR, NL, IT, ES– Clock– Stopwatch– Temperature °C / °F– Memory function for min. and max. temperature– Current speed (0–62 mph (0–99.9 km / h))– Average speed (0–62 mph (0–99.9 km / h))– Maximum speed (0–62 mph (0–99.9 km / h))– Speed comparison– Speed tendency– Trip timer (max. 9:59:59) (count backwards or forwards)– Odometer (count backwards or forwards)– Total odometer and total cycling time display– Calories– Fat-burnt– CO2 savingBike Computer IntroductionCongratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specifi ed appli-cations. If you lend the product to someone else, please also give all the instructions. Proper useThe product is intended for use as a bike computer. Not for commercial use. BIKE COMPUTER / COMPUT ADORA PARA BICICLETA COMPUTADORA PARA BICICLETA Instrucciones de utilización y de seguridad BIKE COMPUTER Operation and Safety NotesIAN 286004DUNM D U20 in 1598 mm22 in 1759 mm24 in 1916 mm26 in (650 A) 2073 mm26,5 in (Tubular) 2117 mm26,6 in (700 x 25C) 2124 mm26,8 in (700 x 28C) 2136 mm27 in (700 x 32C) 2155 mm28 in (700B) 2237 mmATB24 in x 1,75 1888 mmATB26 x1,4 1995 mmATB26 x1,5 2030 mmATB26 x1,75 2045 mmATB26 x 2 (650B) 2099 mm27 in x 1 2138 mm27 in x 1 1 / 4 2155 mmLKGFEDBAIH J10111214151617181920225346C127386398165 24266211 60,079 in (max. 2 mm)61852113Distributed by / Distribuido por: Lidl US LLC., Arlington, VA 22202 Model No. / Modelo Núm.: HG00734A / HG00734BVersion / Versión: 02 / 2017Made in / Hecho en: ChinaLast Information Update · Estado de lasinformaciones: 03 / 2017 · Ident.-No.: HG00734A / B-US032017-9WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.NOTICE indicates information considered important, but not hazard related (e.g. messages related to property damage).DESCRIPTION OF SIGNAL WORDS Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/contact-usVisit a LIDL store for further assistance.IAN 286004Please have your IAN number ready.CUSTOMER SERVICE286004_cri_Fahrradcomputer_660x444mm_US.indd 1 31.03.17 10:39

Navigation menu