LIDL US HG734TX Wireless Bike Computer (Transmitter) User Manual 286004 cri Fahrradcomputer 660x444mm US indd

Download:
Mirror Download [FCC.gov]
Document ID	3377843
Application ID	GeFhkCElyV10rmM8sorhUw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.5kB (1118689 bits)
Date Submitted	2017-05-02 00:00:00
Date Available	2017-05-02 00:00:00
Creation Date	2017-03-31 10:39:34
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-04-10 14:12:49
Document Title	286004_cri_Fahrradcomputer_660x444mm_US.indd
Document Creator	Adobe InDesign CC 2017 (Macintosh)

BIKE COMPUTER /
COMPUTADORA
PARA BICICLETA
21
20
19
10
18
Operation and Safety Notes
COMPUTADORA PARA BICICLETA
Instrucciones de utilización y de seguridad
22
0,079 in
(max. 2 mm)
BIKE COMPUTER
IAN 286004
17
11
16
12
13
15
14
20 in
22 in
24 in
26 in (650 A)
26,5 in (Tubular)
26,6 in (700 x 25C)
26,8 in (700 x 28C)
27 in (700 x 32C)
28 in (700B)
ATB24 in x 1,75
ATB26 x1,4
ATB26 x1,5
ATB26 x1,75
ATB26 x 2 (650B)
27 in x 1
27 in x 1 1 / 4
1598 mm
1759 mm
1916 mm
2073 mm
2117 mm
2124 mm
2136 mm
2155 mm
2237 mm
1888 mm
1995 mm
2030 mm
2045 mm
2099 mm
2138 mm
2155 mm
DESCRIPTION OF
SIGNAL WORDS
WARNING indicates a hazardous
situation that, if not avoided, could
result in death or serious injury.
NOTICE indicates information considered
important, but not hazard related (e.g.
messages related to property damage).
US-EN
US-EN
Bike Computer
CUSTOMER SERVICE
Functions
Introduction
Call customer service at
1 (844) 543-5872
Visit the Website Customer
Service Platform at
www.lidl.com/contact-us
Visit a LIDL store for further assistance.
IAN 286004
Please have your IAN number ready.
Congratulations on your purchase. You have selected
a quality product. The instructions for use are a part
of the product. They contain important information
about the safety, use and disposal of the product.
Before using the product, please learn about all the
safety information and usage instructions. Only use
the product as described and for the specified applications. If you lend the product to someone else,
please also give all the instructions.
Proper use
The product is intended for use as a bike computer.
Not for commercial use.
US-EN
US-EN
by one or more of the
following measures:
• Reorient or relocate
the receiving antenna.
• Increase the separation
between the equipment
and receiver.
• Connect the equipment
into an outlet on a different circuit from the
circuit the receiver is
connected to.
• Consult the dealer or
an experienced radio /
TV technician for help.
This product complies
with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This product may not
cause harmful interference, and
US-EN
US-EN
batteries from the product
immediately.
SAVE THESE
INSTRUCTIONS
Before use
Note: Remove all packaging materials from the
product.
Remove the protective foil from the LC display 13
before first use.
Note: This product is not recommended to use
with E-bikes. Interference from the motor may affect
the performance of the product.
Inserting the battery
To insert the battery 3 , proceed as shown in Fig. A.
To open the battery compartment cover, use a
coin to assist you to turn the battery compartment
cover in anti-clockwise direction. Make sure
you fit the battery the right way round (polarity).
This is shown on the back side of the product.
To close the battery compartment cover, use a
coin to assist you to turn the battery compartment cover in clockwise direction.
Scan the QR code with your
smartphone and watch the
video to find out how to assemble the product.
Attaching the bike computer
To attach the product, proceed as shown in
Figs. B to I.
– Menu languages: GB, DE, FR, NL, IT, ES
– Clock
– Stopwatch
– Temperature °C / °F
– Memory function for min. and max. temperature
– Current speed (0–62 mph (0–99.9 km / h))
– Average speed (0–62 mph (0–99.9 km / h))
– Maximum speed (0–62 mph (0–99.9 km / h))
– Speed comparison
– Speed tendency
– Trip timer (max. 9:59:59) (count backwards or
forwards)
– Odometer (count backwards or forwards)
– Total odometer and total cycling time display
– Calories
– Fat-burnt
– CO2 saving
– Scan indicator (functions displayed in
continuous loop)
– Backlight
Description of parts
10
11
12
13
14
15
Magnet
Cable tie
Battery
Cushion for bike computer bracket
Bracket
Sensor
Bike computer’s battery compartment cover
Bike computer
Sensor battery compartment cover
Primary function value display
Function indicator
Secondary function value display
LC display
MODE button (M)
SET button (S)
non-observance of the
operating instructions
and safety advice or
unauthorised use.
The RF Exposure Compliance distance is 20
mm.
Please note that the
warranty does not cover
damage arising from
improper treatment,
US-EN
US-EN
DANGER OF
EXPLOSION!
Never recharge non-rechargeable batteries.
Do not short-circuit batteries / rechargeable
batteries and / or open
them. Overheating, fire or
bursting can be the result.
Never throw batteries /
rechargeable batteries
into fire or water.
Do not exert mechanical
loads to batteries /
rechargeable batteries.
temperatures, which could
affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.
Avoid contact with the
skin, eyes and mucous
membranes. In the event
of contact with battery
acid, thoroughly flush
the affected area with
plenty of clean water
and seek immediate
medical attention.
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries / rechargeable batteries can cause burns
on contact with the skin.
Wear suitable protective
gloves at all times if such
an event occurs.
In the event of a leakage
of batteries / rechargeable
batteries, immediately
remove them from the product to prevent damage.
Only use the same type
of batteries / rechargeable batteries. Do not
mix used and new batteries / rechargeable
batteries.
Remove batteries /
rechargeable batteries if
the product will not be
used for a longer period.
US-EN
Risk of leakage of
batteries / rechargeable batteries
Avoid extreme environmental conditions and
the MODE button 14 . Repeat this process for
all the remaining digits.
Confirm your choice by pressing the
SET button 15 .
Note: You can calculate your tyre circumference (U) by multiplying your tyre diameter (D)
by 3.1416 (Fig. M). The list (Fig. N) contains
the tyre circumferences (U) of the most common
tyre diameters (D).
Press the MODE button 14 to move to the unit
of distance and press the SET button 15 for
edit. Press the + button 22 or – button 21
repeatedly until SET KM KMH or SET MILE
MPH appears in the LC display.
Confirm your choice by pressing the SET
button 15 .
Press the MODE button 14 to move to the age.
A two-digit number appears in the LC display.
Press the SET button 15 for edit and press the
+ button 22 or – button 21 repeatedly until
the desired number appears as the first digit.
Confirm your choice by pressing the MODE
button 14 . Repeat this process for the remaining digit.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to the unit
of weight and press the SET button 15 for edit.
Press the + button 22 or – button 21 repeatedly
until SET KG or SET LB appears in the LC display.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to weight.
A three-digit number appears in the LC display.
Press the SET button 15 for edit and press the
+ button 22 or – button 21 repeatedly until
the desired number appears as the first digit.
Confirm your choice by pressing the MODE
button 14 . Repeat this process for all the
remaining digits.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to the time
format and press the SET button 15 for edit.
Press the + button 22 or – button 21 repeatedly until 12 Hr (12-hour format) or 24 Hr
(24-hour format) appears in the LC display.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to the clock.
A four-digit number appears in the LC display.
Press the SET button 15 for edit and press the
+ button 22 or – button 21 repeatedly until
the desired number appears as the first digit.
Confirm your choice by pressing the MODE
button 14 . Repeat this process for all the
remaining digits.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to CO2
saving. A three-digit number appears in the
LC display. Press the SET button 15 for edit
and press the + button 22 and – button 21
repeatedly until the desired number appears
as the first digit. Confirm your choice by pressing the MODE button 14 . Repeat this process
for all the remaining digits.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to the servicing interval. A three-digit number appears in
the LC display. Press the SET button 15 for edit
and press the + button 22 or – button 21
repeatedly until the desired number of units of
distance to your next intended bicycle servicing
(servicing interval indicator 18 ) appears in the
LC display. Confirm your choice by pressing the
MODE button 14 . Repeat this process for all
the remaining digits.
Note: You have the choice of 0-620.75 miles
(0–999 km) or miles. After the setting is confirmed,
the bike computer will count the trip distance.
When the servicing interval indicator 18 shows
on LC display, you need to check the condition
of your bike (wear, adjustment of brakes, etc.).
Then press the down button 21 to reset the
service interval and this indicator to disappear.
The bike computer will start counting the trip
distance again.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to move to the unit
of temperature and press the SET button 15 for
edit. Press the + button 22 or – button 21 repeatedly until °C or °F appears in the LC display.
Confirm your choice by pressing the
SET button 15 .
Press the MODE button 14 to close the setting
page.
US-EN
US-EN
US-EN
US-EN
US-EN
US-EN
To close the battery compartment cover, use a
coin to assist you to turn the battery compartment
cover in clockwise direction.
Press any button and keep it pressed to return
to normal operating mode.
Note: Once the battery is removed, all stored data
will be erased after approx. 20 seconds.
- If errors occur in the display, remove any such products from the vicinity of the product. In the case of
such malfunctions, remove the battery briefly and
then reinsert again.
Preparing for use
Basic settings
Basic setting: Language > User profile > Wheel
size > Unit of distance and speed > Age > Unit of
weigh > Weight > Time format > Time > CO2 saving >
Servicing interval > Unit of temperature
Key functions: MODE button for selection /
+ button 22 or – button 21 for setting values /
SET button for edit and confirmation
Note: The LC display 13 comes on automatically
approx. 2 seconds after the battery 3 is inserted.
You are immediately offered a choice of languages.
US-EN
US-EN
Never throw batteries in the garbage. They may
contain toxic heavy metals and must be handled as
special waste. The chemical symbols of heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead.
Used batteries should therefore be disposed of
through a local collection point.
· Improper use or transport;
· Disregarding safety and maintenance instructions;
· Accidents or acts of nature (e.g. lightning, fire,
water, etc.).
· Tampering with the product (such as removing
cover, unscrewing screws etc.)
286004_cri_Fahrradcomputer_660x444mm_US.indd 1
US-EN
Press the Set button 15 for edit.
Press the + button 22 or – button 21 repeatedly
until the desired language appears.
Confirm your choice by pressing the SET
button 15 .
Press the MODE button 14 to move to the user
profile and press the SET button 15 for edit.
Press + button 22 or – button 21 repeatedly
until the desired user profile (ADVANCE or
EASY) appears.
Confirm your choice by pressing the SET
button 15 .
Press the MODE button 14 to move to the wheel
size (SET WS). A four-digit number appears in
the LC display. Now enter the tyre circumference
of your wheel in mm. Press the SET button 15
for edit and press + button 22 or – button 21
repeatedly until the desired number appears as
the first digit. Confirm your choice by pressing
US-EN
US-EN
US-EN
US-EN
Note: Make sure that the bike computer 8 is
attached with less than 27.56 in (70 cm) distance
to the sensor 6 . Fix the bike computer 8 to the sensor 6 within a 30 ° angle as shown in Fig. B.
US-EN
US-EN
US-EN
3V
(Direct current)
(CR2032 button cell)
Operating temperature: 0–122 °F (0–50 °C)
IP44 (splash proof):
Suitable for wet locations
US-EN
Press the SET button 15 enter the setting process.
Press the + button 22 and – button 21 repeatedly until the desired symbol is shown.
Press the MODE button 14 to move on to setting
the timer and press the + button 22 and – button 21 repeatedly until the desired number
appears as the first digit. Repeat this process
for all the remaining digits.
Confirm your choice by pressing the SET button
15 and press the MODE button 14 back to
current page.
SCAN: Scan
Note: The scan mode automatically switches
between the trip distance, highest speed, average
speed and trip time displays.
Note: Refer to the section on “Basic settings” to
see how you make or change settings.
Note: To turn off the SCAN function, press the
+ button 22 to return to clock mode.
Improper disposal of batteries can
damage the environment!
US-EN
Technical data
Changes or modifications to this product not
expressly approved by
the party responsible for
US-EN
counting forwards or backwards (+ or - respectively) and 5-digit number.
Press the SET button 15 for edit.
Press the + button 22 and – button 21 repeatedly until the desired symbol is shown.
Press the MODE button 14 to move on to setting the distance on the odometer and press the
+ button 22 and – button 21 repeatedly until
the desired number appears as the first digit.
Repeat this process for all the remaining digits.
Confirm your choice by pressing the SET button
15 and press the MODE button 14 back to
current page.
TIME: Timer
Press the SET button 15 and keep it pressed
for 3 seconds to change the timer settings. The
LC display shows the symbol for counting forwards or backwards (+ or - respectively) and
5-digit number.
What is not covered by the warranty?
The warranty does not cover damage caused by:
· Normal wear and tear of the product, including
fragile parts (such as switches, glass, etc.);
US-EN
READ ALL INSTRUCTIONS.
KEEP FOR FUTURE REFERENCE. IF PASSING THIS
PRODUCT ON TO A THIRD
PARTY ALSO INCLUDE ALL
DOCUMENTS.
US-EN
Press the SET button 15 again to stop the stopwatch.
Press the SET button 15 and keep it pressed
for 3 seconds to reset the stopwatch to 0.
CAL RATE: Current calorie consumption
CALORIE: Calorie meter
Press the SET button 15 and keep it pressed
for 3 seconds to reset the calorie counter to 0.
FAT-BURN: Fat burning in grams
Press the SET button 15 and keep it pressed for
3 seconds to reset the fat burning value to 0.
CO2 KG: CO2 Saving:
Press the SET button 15 and keep it pressed
for 3 seconds to access the CO2 saving reference value.
KM: Odometer
Press the SET button 15 and keep it pressed
for 3 seconds to change the odometer settings.
The LC display 13 shows the symbol for
To help protect the environment, please dispose of
the product properly when it has reached the end
of its useful life, do not throw in the garbage. Information on collection sites and their opening hours
is available from your local authority.
interference will not
occur in a particular
installation. If this product causes harmful interference to radio or
television reception,
which can be determined
by turning the product
off and on, the user is
encouraged to try and
correct the interference
US-EN
Press the SET button 15 and keep it pressed
for 3 seconds to reset the maximum speed display to 0.
AVGSPEED: Average speed
Press the SET button 15 and keep it pressed
for 3 seconds to reset the average speed display to 0.
TEMP: Thermometer
Press the SET button 15 and keep it pressed
for 3 seconds to switch between °C and °F.
Press the SET button 15 to display the highest
temperature (HI) measured so far.
Press the SET button 15 again to display the
lowest temperature (LO) measured so far.
Press the SET button 15 and keep it pressed
while the highest or lowest temperature is displayed to switch back to the current temperature to reset the saved data.
STPWATCH: Stopwatch
Press the SET button 15 to start the stopwatch.
What does this warranty cover?
The warranty covers:
· Damage, breakage or inoperability due to defect.
· Damage not accounted for by normal wear and
tear or following the safety and maintenance
instructions provided in the user manual.
interference in a residential installation. This
product generates, uses
and can radiate radio
frequency energy and, if
not installed and used in
accordance with the
instructions, may cause
harmful interference to
radio communications.
However, there is no
guarantee that
6 Cable ties
2 Batteries 3 V
(Direct current), type
CR2032 button cell
2 Spare seal ring for bike
computer and sensor
1 Operating instructions
1 Bike computer
1 Bracket for bike
computer
1 Cushion for bike
computer bracket
1 Bracket with sensor
1 Magnet
Battery:
Safety
instructions for
batteries /
rechargeable
batteries
This product is not intended
for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision
or instruction concerning
use of the product by a
compliance could void
the user‘s authority to
operate the product.
Note: This product has
been tested and complies
with the limits for a Class
B digital device, pursuant
to Part 15 of the FCC
Rules. These limits are
designed to provide
reasonable protection
against harmful
US-EN
US-EN
Warranty
Included items
person responsible for
their safety. Children
should be supervised to
ensure that they do not
play with the product.
US-EN
US-EN
Contact your local waste management
authority for additional information on
how to dispose of the used product.
IMPORTANT
SAFETY
INSTRUCTIONS
Model: HG00734A-TX, HG00734B-TX
FCC-ID: 2AJ9O-HG734TX
Model: HG00734A-RX, HG00734B-RX
US-EN
US-EN
Dispose of the packaging through
your local recycling facilities and in
compliance with all federal, state
and local regulations.
21
22
DANGER TO LIFE!
Keep batteries / rechargeable batteries out of reach
of children. If accidentally
swallowed seek immediate medical attention.
US-EN
Disposal
17
18
19
20
Compares your current speed against the
average speed
▲ higher than your average speed
▼ lower than your average speed
SCAN indicator
Servicing interval indicator
Battery state indicator
Speed tendency indicator:
Indicates speed trend
Acceleration – anticlockwise rotation
Deceleration – clockwise rotation
Down button (-)
Up button (+)
US-EN
US-EN
(2) this product must
accept any interference
received, including interference that may cause
undesired operation.
16 Speed comparison indicator:
What is the period of coverage and
warranty resolution?
The warranty is for 3 years from the date of purchase.
At our discretion, product will either be refunded or
replaced.
What will we not do?
We will not:
· Start a new warranty period upon product exchange;
· We will not repair product.
· Call customer service at 1 (844) 543-5872
· Visit the Website Customer Service Platform at
www.lidl.com/contact-us
· Visit a LIDL store for further assistance
CUSTOMIZE mode
Changing the batteries
Apart from the ADVANCE and EASY mode, you
can make your individual adjustments in the
CUSTOMIZE mode (see procedure).
Press the Set button 15 to enter the
CUSTOMIZE mode.
Note: By repeatedly pressing the + button 22
and – button 21 , you can toggle between the
ADVANCE and EASY mode. In the EASY
mode, press and hold the SET button 15 . Press
the + button 22 and – button 21 to switch the
settings on or off (e.g. time). Choose “On”, to
add the chosen adjustment to the EASY modes.
Choose “Off“, if you do not want to add the
adjustments.
Press the SET button 15 , to confirm your entry.
Repeat this process for another function.
Using the backlight
Resetting the bike computer
Press the SET button 15 to switch on the backlight temporarily. The backlight automatically
extinguishes after a short period.
Press the MODE button 14 and + button 22
at the same time and keep them pressed until
RESET appears in the LC display 13 .
Now press the SET button 15 . This allows you
to adjust the previously set basic setting data
(language, age, weight, time). The rest of the
stored data will be deleted.
US-EN
US-EN
US-EN
Note: The battery of the bike computer must be
replaced when the battery state indicator 19 appears
on the LC display 13 .
Press the MODE button 14 and the SET button
15 at the same time and keep them pressed
until the battery symbol and {{----}} appears in
the LC display 13 .
To replace the battery, proceed as shown in
figure A.
To open the battery compartment cover, use a
coin to assist you to turn the battery compartment cover in anti-clockwise direction. Take out
the old battery and replace with a new battery.
Make sure you fit the battery the right way round
(polarity). This is shown inside the battery compartment.
Adjust the sealing ring before inserting the
battery.
Note: This product has delicate electronic components. Therefore interference may occur when it is
near products which transmit radio signals.
US-EN
US-EN
Removing the bike computer
from the bike
Turn the bike computer anticlockwise to detach
the bike computer.
Cut off the protruding tails of the cable ties 2
with a suitable tool such as diagonal pliers.
Troubleshooting
You have now completed the basic settings. If you
want to change the basic setting data, follow the
steps in “Resetting the bike computer” section and
reset all basic setting data again.
Connect the bike computer
and sensor
Use the magnet 1 to trigger the sensor 6 , the
speed tendency indicator 20 will show a graph to
indicate a successful connection. Now the bike
computer 8 is ready for use. If connection fails,
follow the steps in “Changing the batteries” section
and reset all basic setting data again.
You will need to re-connect the bike computer 8
and sensor 6 again.
Using the bike computer
Note: If the bike computer remains unused for
more than 5 minutes, it automatically switches
into the stand-by mode. Press any button or
Problem
Solution
Empty LC-display or no Remove battery. Insert
response after putting a sharp object (e.g.
screwdriver) into the hole
the batteries in again
marked with “RESET”.
Insert a 3 V battery into
the battery compartment
in such a way that the +
terminal points upwards.
Replace the battery cover
on the battery compartment. The microprocessor
is reset and restarted.
US-EN
Risk of damage of the
product
Only use the specified
type of battery /
rechargeable battery!
Insert batteries / rechargeable batteries
according to polarity
marks (+) and (-) on the
battery / rechargeable
battery and the product.
Clean the contacts on
the battery / rechargeable battery and in the
battery compartment
before inserting!
Remove exhausted
batteries / rechargeable
US-EN
any vibration made to reactivate the computer.
The function indicator 11 shows the current mode.
Press the + button 22 or MODE button 14
repeatedly to page through the various modes.
Press the SET button 15 to change into the secondary function for any function.
Press the SET button 15 and keep it pressed to
call or reset up any saved values.
The bike computer has the following
functions:
ADVANCE mode:
CLOCK > TOTALODO > TOTAL-TM > TRIPDIST >
MAXSPEED > AVGSPEED > TRIPTIME > TEMP >
STPWATCH > CAL RATE > CALORIE > FAT-BURN
> CO2 KG > KM+/- > TIME+/- > SCAN
EASY mode:
Press the MODE button 14 you can choose function
display:
TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIME
US-EN
Problem
Speed or distance are
not displayed.
Display is black
The LC-display shows
irregular symbols.
US-EN
Using functions
Note: All the functions and secondary functions
are described in the following list.
CLOCK: Displays the time
Press the SET button 15 and keep it pressed
for 3 seconds to access the time settings.
TOTALODO: Total odometer
Press the SET button 15 and keep it pressed
for 3 seconds to access the wheel size settings,
total distance and servicing interval.
TOTAL-TM: Total time cycling
Press the SET button 15 and keep it pressed
for 3 seconds to make changes to the saved
total time cycling.
TRIPDIST: Trip distance
Press the SET button 15 and keep it pressed
for 3 seconds to reset the trip distance, the
average speed and the trip time displays to 0.
MAXSPEED: Maximum speed
US-EN
Cleaning and care
Solution
Adjust magnet and
sensor correctly.
- Check that the battery
is inserted with the poles
arranged the right way
round.
The ambient temperature
is too high or the bike
computer was exposed
to direct sunlight for too
long. Remove product
from direct sunlight and
let it cool off for a while.
Do not use any liquids or cleaning agents for
cleaning. Otherwise there is a risk of damaging
the product.
The product should only be cleaned on the
outside with a soft, dry cloth.
Maintenance
Remove the battery when the product will not
be used for longer period of time.
Check regularly the cable and components for
any damage and safe fit.
Remove battery and
replace it again.
US-EN
US-EN
How does state law relate to this
warranty?
Any State Laws that contradict or modify the warranty
listed here to the consumer’s benefit will be followed.
To ensure the quickest warranty return process,
please have the following available:
· The original sales receipt that includes the date
purchased;
· The product and manual in the original package;
· A statement of the problem.
Distributed by / Distribuido por:
Lidl US LLC., Arlington, VA 22202
Model No. / Modelo Núm.:
HG00734A / HG00734B
Version / Versión: 02 / 2017
What must you do to keep the warranty
in effect?
· Retain the original receipt;
· Follow all product instructions;
· Do not repair or modify the product.
Made in / Hecho en: China
Last Information Update · Estado de las
informaciones: 03 / 2017 · Ident.-No.:
HG00734A / B-US032017-9
How to process the warranty?
We recommend first either:
US-EN
US-EN
US-EN
31.03.17 10:39

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2017:03:31 10:39:34+02:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2017:04:10 14:12:49+08:00
Has XFA                         : No
Language                        : de-DE
Tagged PDF                      : Yes
XMP Toolkit                     : XMP Core 5.5.0
Metadata Date                   : 2017:03:31 10:39:38+02:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:376298e2-3d7e-4d46-8534-ae065fcdb49e
Original Document ID            : xmp.did:38096764-2dcf-465c-90cf-47d5ceae5d63
Document ID                     : xmp.id:2f5fa2e2-d3f1-413e-8b20-1c2790b85d64
Rendition Class                 : proof:pdf
Version ID                      : 1
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:03:31 10:39:34+02:00
Derived From Instance ID        : xmp.iid:01f1d885-1e99-4ca5-9c32-60ef6fbc6c41
Derived From Document ID        : xmp.did:38096764-2dcf-465c-90cf-47d5ceae5d63
Derived From Original Document ID: xmp.did:38096764-2dcf-465c-90cf-47d5ceae5d63
Derived From Rendition Class    : default
Format                          : application/pdf
Title                           : 286004_cri_Fahrradcomputer_660x444mm_US.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-3:2003
GTS PDFX Conformance            : PDF/X-3:2003
Page Count                      : 1

EXIF Metadata provided by EXIF.tools