LINKSYS EA2700 Linksys EA2700 Dual-Band N600 Router with Gigabit User Manual Linksys EA Series User Guide

LINKSYS LLC Linksys EA2700 Dual-Band N600 Router with Gigabit Linksys EA Series User Guide

User Manual

User GuideLinksys EA-Series
iTable of ContentsLinksys EA-SeriesiProduct overviewEA2700/EA3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Back view 1Bottom view 1EA4500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Top view 2Back view 2Setting Up Your EA-Series RouterWhere to find more help . . . . . . . . . . . . . . . . . . . . . . . . . .3How to set up your router . . . . . . . . . . . . . . . . . . . . . . . . .3How to start Cisco Connect 3Use Cisco Connect to manage your router 3How to manually set up your router. . . . . . . . . . . . . . . . . . .3Advanced ConfigurationHow to open the browser-based utility . . . . . . . . . . . . . . . .4Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Language 5Internet Setup 5Wireless > Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . .6Wireless Settings 6Wireless SecurityWireless > Wireless Security . . . . . . . . . . . . . . . . . . . . . . . .7Personal options 7Office options 7Option settings 7TroubleshootingHow to run Cisco Connect after setup . . . . . . . . . . . . . . . . 10Your router was not successfully set up . . . . . . . . . . . . . . . 11Get Windows XP Service Pack 3 message . . . . . . . . . . . . . . . 11Your Internet cable is not plugged in message . . . . . . . . . . . . 12Cannot access your router message . . . . . . . . . . . . . . . . . . 13Device not found message . . . . . . . . . . . . . . . . . . . . . . . . 14SpecificationsLinksys EA2700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Linksys EA3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Linksys EA4500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Table of Contents
1Product overviewLinksys EA-Series1Product overviewEA2700/EA3500Back viewEthernet ports Wi-Fi Protected Setup buttonInternet portPower portPower indicatorUSB port (EA3500 only)Your router’s appearance may vary •USB port (EA3500 only)—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port. •Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network. •Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem.Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8. •Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup error. •Power—Connect the included AC power adapter to this port. CAUTIONUse only the adapter that came with your router. •Power button—Press | (on) to turn on the router.Bottom viewYour router’s appearance may vary •Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility.
2Product overviewLinksys EA-SeriesEA4500Top viewIndicator light •Indicator light—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup error.Back viewEthernet portsWi-Fi Protected Setup buttonInternet port Power portReset buttonUSB port •Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network. •Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem. •Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8. •USB port—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port. •Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility. •Power—Connect the included AC power adapter to this port. CAUTIONUse only the adapter that came with your router. •Power button—Press | (on) to turn on the router.
3Setting Up Your EA-Series RouterLinksys EA-Series3Where to find more helpIn addition to this User Guide, you can find help at these locations: •Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) •Cisco Connect help (run Cisco Connect, then click Learn More where available) •Browser-based utility context-sensitive help (open the utility, then click Help in the right-side column.)How to set up your routerThe easiest and fastest way to set up your router is to run the Cisco Connect setup software. How to start Cisco ConnectWhen you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer. You can then use Cisco Connect to easily manage your router.NOTE:If you lose your setup CD, you can download the software from Linksys.com/support.To start Cisco Connect for the first time: 1. Insert the CD into your CD or DVD drive.2. Click Set up your Linksys Router.If you do not see this: •For Windows, click Start, Computer, then double-click the CD drive and the Setup icon. •For Mac, double-click the CD icon on your desktop, then double-click the Setup icon.3. Follow the on-screen instructions to complete your router setup.Use Cisco Connect to manage your routerAfter your router has been set up and Cisco Connect has been installed, you can use Cisco Connect to easily manage many of your router’s settings such as: •Connect devices to your network •Test your Internet connection speed •Configure parental controls •Set up guest access •Change your router’s name and passwordHow to manually set up your routerAfter setting up the router with the setup software (located on the CD), the router will be ready for use. If you would like to change its advanced settings, or if the software does not run, use the router’s browser-based utility.You can access the utility with a web browser on a computer connected to the router. For more information on using the utility, see “How to open the browser-based utility” on page 3.Setting Up Your EA-Series Router
4Advanced ConfigurationLinksys EA-Series4How to open the browser-based utilityTo access some advanced settings, you need to open the browser-based utility. To open the browser-based utility:1. Run Cisco Connect, click Change under Router settings, click Advanced settings, then click OK.– or –Open a web browser on a computer connected to your network, then go to 192.168.1.1.The router prompts you for a user name and password.2. Enter the user name and password, then click OK. The utility’s main menu opens.TIPSIf you set up your router without using Cisco Connect, your router’s default username and password is admin.If you used Cisco Connect to set up your router, you can see your router’s user name and password by running Cisco Connect, then clicking Router settings.Advanced Configuration
5Advanced ConfigurationLinksys EA-SeriesSetup > Basic SetupThe first screen that appears is the Basic Setup screen. This allows you to change the router’s general settings.LanguageSelect your language To use a different language, select one from the drop-down menu. The language of the browser-based utility will change five seconds after you select another language.Internet SetupThe Internet Setup section configures the router to your Internet connection. Most of this information can be obtained through your Internet Service Provider (ISP).Internet Connection TypeSelect the type of Internet connection your ISP provides from the drop-down menu. The available types are: •Automatic Configuration - DHCP •Static IP •PPPoE •PPTP •L2TP •Bridge ModeAutomatic Configuration - DHCPThe default Internet Connection Type is Automatic Configuration - DHCP (Dynamic Host Configuration Protocol). Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.)Static IPIf you are required to use a fixed IP address to connect to the Internet, select Static IP.PPPoEIf you have a DSL connection, check whether your ISP uses Point-to-Point Protocol over Ethernet (PPPoE). If so, select PPPoE.PPTPPoint-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, then select Obtain an IP Address Automatically. If you are required to use a fixed IP address to connect to the Internet, then select Specify an IP Address and configure the options below.
6Advanced ConfigurationLinksys EA-SeriesL2TPLayer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel.Connect on Demand or Keep AliveThe Connect on Demand and Keep Alive options let you choose whether the router connects to the Internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected. Select the appropriate option.Wireless > Wireless SettingsThe settings for wireless networking are set on this screen.NOTEAfter you set up the wireless network(s), set up the wireless security settings.Wireless SettingsNetwork Mode Select the wireless standards your network will support. •Mixed If you have Wireless-N (2.4 GHz), Wireless-G, and Wireless-B devices in your network, keep the default, Mixed. •Wireless-B/G Only If you have both Wireless-B and Wireless-G (2.4 GHz) devices in your network, select Wireless-B/G Only. •Wireless-B Only If you have only Wireless-B devices, select Wireless-B Only. •Wireless-G Only If you have only Wireless-G devices, select Wireless-G Only. •Wireless-N Only If you have only Wireless-N (2.4 GHz) devices, select Wireless-N Only. •Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) devices in your network, select Disabled.NOTEIf you have a dual-band router, you can select Mixed, Wireless-A Only, Wireless-N Only, or Disabled for the 5 GHz band.If you are not sure which mode to use, keep the default, Mixed.Network Name (SSID) The Service Set Identifier (SSID) is the network name shared by all devices in a wireless network. It is case-sensitive and must not exceed 32 keyboard characters. The default is Cisco followed by the last 5 digits of the router’s serial number, which is found on the bottom of the router. If you used the setup software for installation, then the default Network Name is changed to an easy-to-remember name.NOTEIf you restore the router’s factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value. Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name.Channel Width For best performance in a network using Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices, select Auto (20 MHz or 40 MHz). For a channel width of 20 MHz, select 20 MHz only.Channel Select the channel from the drop-down list for Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) networking. If you are not sure which channel to select, then keep the default, Auto.SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router. To broadcast the router’s SSID, keep the default, Enabled. If you do not want to broadcast the router’s SSID, then select Disabled.
7Wireless SecurityLinksys EA-Series7Wireless > Wireless SecurityThe wireless security settings configure the security of your wireless network(s). The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS. (WPA stands for Wi-Fi Protected Access. WEP stands for Wireless Equivalent Privacy. RADIUS stands for Remote Authentication Dial-In User Service.)Personal optionsSecurity Option StrengthWPA2 Personal StrongestWPA2/WPA Mixed Mode WPA2: Strongest WPA: StrongWPA Personal StrongWEP BasicOffice optionsThe office options are available for networks that use a RADIUS server for authentication. The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication.Security Option StrengthWPA2 Enterprise StrongestWPA2/WPA Enterprise Mixed ModeWPA2: Strongest WPA: StrongWPA Enterprise StrongRADIUS BasicOption settingsWPA2/WPA Mixed Mode, WPA2 Personal, WPA PersonalNOTESIf you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase.If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase.If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase.Passphrase Enter a passphrase of 8-63 characters. The default is password. If you used the setup software for installation, then the default is changed to a unique passphrase, which you can find by running Cisco Connect, then clicking Router settings.Wireless Security
8Wireless SecurityLinksys EA-SeriesWPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA EnterpriseThese option is used in coordination with a RADIUS server. (These should only be used when a RADIUS server is connected to the router.) NOTESIf you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key.If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key.If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key.RADIUS Server Enter the IP address of the RADIUS server.RADIUS Port Enter the port number of the RADIUS server. The default is 1812.Shared Key Enter the key shared between the router and the server.WEPWEP is a basic encryption method, which is not as secure as WPA. NOTE:If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key.Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate.Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.TX Key Select a default TX (Transmit) Key to use. The default is 1.
9Wireless SecurityLinksys EA-SeriesRADIUSThis option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the router.) NOTE:If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key.RADIUS Server Enter the IP address of the RADIUS server.RADIUS Port Enter the port number of the RADIUS server. The default is 1812.Shared Secret Enter the key shared between the router and the server.Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate.Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.TX Key Select a default TX (Transmit) Key to use. The default is 1.DisabledIf you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet. You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security.
10TroubleshootingLinksys EA-Series10This chapter can help you solve common setup issues and connect to the Internet. Your router’s CD includes Cisco Connect, the router setup software that makes it easy to connect network devices, change router settings, control guest access, enable parental controls, and connect to the Internet. Cisco Connect is also installed onto your computer during setup. If Cisco Connect is prevented from completing the setup, this chapter will guide you through finding solutions.You can find more help from our award-winning customer support at linksys.com/support.How to run Cisco Connect after setupWhen you run the setup CD, Cisco Connect is automatically installed onto your computer. You can then use Cisco Connect to easily manage your network. To start Cisco Connect on a Windows computer:1. Click Start, All Programs, then click Cisco Connect. The Cisco Connect main menu opens.To start Cisco Connect on a Mac OS X computer:1. Open Finder and click Applications in the left panel.2. Double-click the Cisco Connect icon.The Cisco Connect main menu opens.Troubleshooting
11TroubleshootingLinksys EA-SeriesYour router was not successfully set upIf Cisco Connect did not complete the setup, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin for 5-15 seconds, then run the Setup program again on the router’s CD.Your router’s appearance may vary • Temporarily disable your computer’s firewall (see the security software’s instructions for help), then run the Setup program again on the router’s CD. • If you have another computer, use that computer to run the Setup program again on the router’s CD.Get Windows XP Service Pack 3 messageOn Windows XP computers, Cisco Connect requires Service Pack 3 in order to work. If you receive a “Get Windows Service Pack 3” message when setting up your router for the first time, follow these troubleshooting steps.If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3.TIPTo temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem.To install Service Pack 3:1. Click the link in the Cisco Connect error message or connect to the Microsoft Update website (update.microsoft.com/windowsupdate).2. Follow the instructions on the website or contact Microsoft if you need further help.3. After downloading and installing Service Pack 3, run the Setup program on your router’s CD.
12TroubleshootingLinksys EA-SeriesYour Internet cable is not plugged in messageIf you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps.To fix the problem:1. Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN. Back view of routerBack view of cable modem Back view of DSL modem2. Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position.3. If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.4. If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.5. Return to the Cisco Connect window and click Next to try again. If the window has already been closed, run the Setup program again on the router’s CD.
13TroubleshootingLinksys EA-SeriesCannot access your router messageIf you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps. To access your router, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network.To fix the problem on Windows computers:1. On your Windows desktop, right-click the wireless icon in the system tray. 2. Click View Available Wireless Networks. A list of available networks appears.3. Click your own network name, then click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected.4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields, then click Connect. Your computer connects to the network, and you should now be able to access the router.
14TroubleshootingLinksys EA-SeriesTo fix the problem on Mac computers:1. In the menu bar across the top of the screen, click the AirPort icon. A list of wireless networks appears. Cisco Connect has automatically assigned your network a name.In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected.2. Click the wireless network name of your Linksys E-Series router (BronzeEagle in the example).3. Type your wireless network password (Security Key) into the Password field, then click OK.Device not found messageIf you get a “Device not found” message when trying to connect a network device (such as an iPhone, iPod, or smartphone), follow these troubleshooting steps.TIPFor a stronger signal during initial setup, move your wireless devices near your router. Long distances make it harder for the router to detect the devices.To fix the problem:1. Run Cisco Connect.
15TroubleshootingLinksys EA-Series2. Click Computers and devices. The Computers and other devices window appears.3. Click Other Wireless devices. 4. Enable your wireless network device’s Wi-Fi connection, then search for your wireless network name. See your device documentation for help. NOTEYour wireless device must support WPA/WPA2.5. On the wireless network device, select the network name of your router and enter the password (Security Key).6. In Cisco Connect, click Next. Example: On your Smartphone or other wireless device, locate the Wi-Fi menu and search for available wireless networks. In this example, using the network information provided by Cisco Connect shown in the previous screen, click BronzeEagle.Android iPhone7. Enter the password (Security Key) provided by Cisco Connect. In this example, the security key is B6eM9UkCjz.NOTEThe password is case sensitive. Make sure that you enter letters in the correct case.8. When your wireless device is successfully connected to your wireless network, enter a name for the device in Cisco Connect, then click Finish.
16SpecificationsLinksys EA-Series1616Linksys EA2700Model Name Linksys EA2700Description Dual-Band N600 Router with GigabitModel Number EA2700Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u, 802.3ab# of Antennas 4 total, 2 internal antennas per each 2.4 GHz & 5 GHz radio bandDetachable (y/n) No Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAMReceive Sensitivity 2.4 GHz (Typical) 802.11b: -90 dBm @ 11 Mbps 802.11g: -75 dBm @ 54 Mbps 802.11n 20 MHz: -73 dBm @ MCS15 802.11n 40 MHz: -70 dBm @ MCS15 5 GHz 802.11a: -72 dBm @ 54 Mbps 802.11n 20 MHz: -70 dBm @ MCS15 802.11n 40 MHz: -67 dBm @ MCS15Antenna Gain 2.4 GHz Antenna 1 ≤ 3.45 dBi Antenna 2 ≤ 2.46 dBi 5 GHz Antenna 1 ≤ 4.41 dBi Antenna 2 ≤ 5.15 dBi UPnP SupportedSecurity features WEP, WPA, WPA2Security key bits Up to 128-bit encryptionEnvironmentalDimensions 174 x 190 x 28 mm (6.85" x 7.48" x 1.10") Unit Weight 297.7 g (10.5 oz)Power 12V, 1ACertifications FCC, IC, CE, Wi-Fi A/B/G/N Operating Temp. 0 to 40°C (32 to 104°F)Storage Temp. -20 to 60°C (-4 to 140°F) Operating Humidity 10 to 80%, relative humidity, non-condensingStorage Humidity 5 to 90% non-condensingNOTESFor regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support.Specifications are subject to change without notice.Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.Specifications5.153.60
17SpecificationsLinksys EA-Series17Linksys EA3500Model Name Linksys EA3500Description Dual-Band N750 Router with Gigabit and USBModel Number EA3500# of Antennas 6 total, 3 internal antennas per each 2.4 GHz & 5 GHz radio bandDetachable (y/n) No Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)Ports Internet, Ethernet (1-4), USB, PowerButtons Reset, Wi-Fi Protected SetupLEDs Power, Internet, Ethernet (1-4)Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAMReceive Sensitivity 2.4 GHz 802.11b: -87 dBm @ 11 Mbps (Typical) 802.11g: -77 dBm @ 54 Mbps (Typical) 802.11n (20 MHz): -72 dBm @ MCS15 (Typical) 802.11n (40 MHz): -69 dBm @ MCS15 (Typical) 5 GHz 802.11a: -74 dBm @ 54 Mbps (Typical) 802.11n 20 MHz: -67 dBm @ MCS23 (Typical) 802.11n 40 MHz: -64 dBm @ MCS23 (Typical)Antenna Gain 2.4 GHz (Dipole Antennas) Antenna 1 ≤ 2.70 dBi Antenna 2 ≤ 3.70 dBi Antenna 3 ≤ 4.95 dBi 5 GHz (Dipole Antennas) Antenna 1 ≤ 4.46 dBi Antenna 2 ≤ 3.23 dBi Antenna 3 ≤ 3.88 dBi UPnP SupportedSecurity features WEP, WPA, WPA2 Security key bits Up to 128-bit encryptionStorage File System Support FAT, and NTFS, and HFS+EnvironmentalDimensions 6.69" x 0.98" x 7.48" (170 x 25 x 190 mm)Unit Weight 11.5 oz (326 g)Power 12V, 2ACertifications FCC, IC, CE, Wi-Fi A/B/G/N, Windows 7Operating Temp. 32 to 95°F (0 to 35°C)Storage Temp. -4 to 140°F (-20 to 60°C)Operating Humidity 10 to 80% relative humidity, non-condensingStorage Humidity 5 to 90% non-condensingNOTESFor regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support.Specifications are subject to change without notice.Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.
18SpecificationsLinksys EA-Series18Linksys EA4500Model Name Linksys EA4500Description Dual-Band N900 Router with Gigabit and USBModel Number EA4500Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u, 802.3abRadio Frequency 2.4 and 5 GHzSwitch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)Ports Power, USB, Internet, Ethernet (1-4)Buttons Reset, Wi-Fi Protected SetupLEDs Top panel: Power Back panel: Internet, Ethernet (1-4)Number of Antennas 6 total, 3 internal antennas per each 2.4 GHz and 5 GHz radio band Detachable (y/n) NoModulations 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAMReceive Sensitivity 2.4 GHz 802.11b: -87 dBm @ 11 Mbps (Typical) 802.11g: -77 dBm @ 54 Mbps (Typical) 802.11n: 20 MHz: -70 dBm @ MCS23 (Typical) 802.11n: 40 MHz: -66 dBm @ MCS23 (Typical) 5 GHz 802.11a: -74 dBm @ 54 Mbps (Typical) 802.11n: 20 MHz: -67 dBm @ MCS23 (Typical) 802.11n: 40 MHz: -64 dBm @ MCS23 (Typical)Antenna Gain in dBi 2.4 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3.31 dBi (Right) PIFA 2 ≤ 3.45 dBi (Front) PIFA 3 ≤ 1.96 dBi (Left) 5 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3.71 dBi (Right) PIFA 2 ≤ 3.60 dBi (Front) PIFA 3 ≤ 4.27 dBi (Left)Supported File Systems for Storage Device FAT32, NTFS, and HFS+UPnP SupportedSecurity Features WEP, WPA, WPA2Security Key Bits Up to 128-bit encryptionEnvironmentalDimensions 8.86" x 0.98" x 6.30" (225 x 25 x 160 mm)Unit Weight 12.7 oz (360 g)Power 12V, 2ACertifications FCC, IC, CE, Wi-Fi a/b/g/n, Windows 7, DLNAOperating Temp. 32 to 104°F (0 to 40°C)Storage Temp. -4 to 140°F (-20 to 60°C)Operating Humidity 10 to 80% relative humidity, non-condensingStorage Humidity 5 to 90% non-condensingNOTESFor regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support.Specifications are subject to change without notice.Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.
3425-01602Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners.© 2012 Cisco and/or its affiliates. All rights reserved.Visit linksys.com/support for award-winning technical support
Linksys Dual-Band N Routers and Bridges Regulatory Information
iLinksys Dual-Band N Routers and BridgesTable of ContentsWireless Regulatory Information 1FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Avis d’Industrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Avis de non-responsabilité concernant les appareils sans fil . . . . . . . . . . . . . . . . . . 2Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive). . . 2Wireless Equipment (Wireless-N/G/A/B Products) . . . . . . . . . . . . . . . . . . . . . . . . . 3National Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Product Usage Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Technical Documents on http://home.cisco.com/wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4WEEE Information 5User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1Linksys Dual-Band N Routers and BridgesWireless Regulatory InformationFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna •Increase the separation between the equipment or devices •Connect the equipment to an outlet other than the receiver’s •Consult a dealer or an experienced radio/TV technician for assistanceFCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11.The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Safety Notices WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.Industry Canada StatementThis Class B digital apparatus complies with Canadian ICES-003 and RSS210.Operation is subject to the following two conditions:1. This device may not cause interference and2. This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada Radiation Exposure StatementThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Restrictions in the 5 GHz BandThe device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to licensed exempt LAN devices.Additional requirements for the band 5600-5650 MHz: Until further notice, devices subject to this Section shall not be capable of transmitting in the band 5600-5650 MHz, so that Environment Canada weather radars operating in this band are protected.
2Linksys Dual-Band N Routers and BridgesAvis d’Industrie CanadaCet appareil numérique de la classe B est conforme aux normes NMB-003 et RSS210 du Canada.L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :1. il ne doit pas produire de brouillage et 2. il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.Avis d’Industrie Canada concernant l’exposition aux radiofréquencesCe matériel est conforme aux limites établies par IC en matière d’exposition aux radiofréquences dans un environnement non contrôlé. Ce matériel doit être installé et utilisé à une distance d’au moins 20 cm entre l’antenne et le corps de l’utilisateur.L’émetteur ne doit pas être placé près d’une autre antenne ou d’un autre émetteur, ou fonctionner avec une autre antenne ou un autre émetteur.Restrictions dans la bande 5 GHzL’appareil pour la bande de 5150 à 5250 MHz est conçu pour usage à l’intérieur seulement afin de réduire le potentiel d’interférences pour les systèmes mobiles par satellite qui utilisent le même canal.Du fait que les radars haute puissance ont la priorité dans les bandes 5250-5350 MHz et 5650-5850 MHz, ils pourraient causer des interférences ou endommager les périphériques réseau sans fil.Autres restrictions pour la bande 5 600-5 650 MHz : sauf avis contraire, les périphériques concernés par cette section ne doivent pas être capables de transmettre dans la bande 5 600-5 650 MHz afin de protéger les radars d’Environnement Canada qui l’utilisent.Wireless DisclaimerThe maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.Avis de non-responsabilité concernant les appareils sans filLes performances maximales pour les réseaux sans fil sont tirées des spécifications de la norme IEEE 802.11. Les performances réelles peuvent varier, notamment en fonction de la capacité du réseau sans fil, du débit de la transmission de données, de la portée et de la couverture. Les performances dépendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point d’accès, du volume du trafic réseau, des matériaux utilisés dans le bâtiment et du type de construction, du système d’exploitation et de la combinaison de produits sans fil utilisés, des interférences et de toute autre condition défavorable.Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive)Compliance Information for Cisco Consumer Products (2,4 and 5 GHz) Relevant to the European Union and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive)Бъ л г а р ск и [Bulgarian]Това оборудване отговаря на съществените изисквания и приложими клаузи на Директива 1999/5/ЕС.Česky [Czech]:Toto zařízení je v souladu se základními požadavky a ostatními odpovídajícími ustanoveními Směrnice 1999/5/EC.Dansk [Danish]:Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.Deutsch [German]:Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Eesti [Estonian]:See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.English:This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish]:Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.Ελληνική [Greek]:Αυτό ο εξοπλισµό είναι σε συµµόρφωση µε τι ουσιώδει απαιτήσει και άλλε σχετικέ διατάξει τη Οδηγία 1999/5/EC.Français [French]:Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.
3Linksys Dual-Band N Routers and BridgesÍslenska [Icelandic]:Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.Italiano [Italian]:Questo apparato è conforme ai requisiti essenziali e agli altri principi sanciti dalla Direttiva 1999/5/CE.Latviski [Latvian]:Šī iekārta atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.Lietuvių [Lithuanian]:Šis įrenginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas šios direktyvos nuostatas.Nederlands[Dutch]:Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.Malti [Maltese]:Dan l-apparat huwa konformi mal-ħtiġiet essenzjali u l-provedimenti l-oħra rilevanti tad-Direttiva 1999/5/EC.Magyar[Hungarian]:Ez a készülék teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben meghatározott vonatkozó rendelkezéseket.Norsk[Norwegian]:Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.Polski [Polish]:Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE: 1999/5/EC.Português [Portuguese]:Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.Română [Romanian]Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC.Slovensko [Slovenian]:Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.Slovensky [Slovak]:Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi [Finnish]:Tämä laite täyttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen.Svenska [Swedish]:Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC.For all products, the Declaration of Conformity (DofC) is available through one or more of these options: • A pdf file is included on the product’s CD. • A print copy is included with the product. • A pdf file is available on the product’s webpage. Visit http://home.cisco.com/wireless and select your country or region. Then select your product.If you need any other technical documentation, see the “Technical Documents on http://home.cisco.com/wireless” section, as shown later in this document.Wireless Equipment (Wireless-N/G/A/B Products)The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC: • Radio: EN 300 328 and/or EN 301 893 as applicable • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950-1 and either EN 50385 or EN 50371For the Cisco Wireless-N, -G, -B, and/or -A products, the following CE mark and class 2 identifier are added to the equipment.National RestrictionsThis product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci‑dessous:Questo prodotto è utilizzabile in tutti i paesi EU (e in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesi menzionati di seguito:Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten:In the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the use of wireless local area networks (LANs). The Overview of Regulatory Requirements for Wireless LANs table provides an overview of the regulatory requirements applicable for the 2,4- and 5-GHz bands.Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable.The requirements for any country may evolve. Cisco Consumer Products recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4- and 5-GHz wireless LANs.
4Linksys Dual-Band N Routers and BridgesOverview of Regulatory Requirements for Wireless LANsFrequency Band (MHz)†Max Power Level (EIRP) (mW)Indoor ONLYIndoor & Outdoor2400-2483,5 100 X5150-5350†200 X5470-5725 1000 X†Dual band versions which can also operate in the 5 GHz band are limited to only operate within the band 5150-5250 MHz and as such are restricted to indoor use only (except Denmark).The following countries have restrictions and/or requirements in addition to those given in the Overview of Regulatory Requirements for Wireless LANs table:DenmarkIn Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.I Danmark må frekvensbåndet 5150 ‑ 5350 også anvendes udendørs.FranceFor 2,4 GHz, the product should not be used outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band OR when used indoors. Check http://www.arcep.fr/ for more details.Pour la bande 2,4 GHz, l’ équipement ne doit pas être utilisé en extérieur dans la bande 2454 ‑ 2483,5 MHz. Il n’y a aucune restriction pour son utilisation dans d’autres parties de la bande des 2,4 GHz ainsi que pour une utilisation en intérieur. Consultez http://www.arcep.fr/ pour de plus amples détails.ItalyThis product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owner’s property, its use requires a “general authorization”. Please check http://www.comunicazioni.it/ for more details. Questo prodotto è conforme alle specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2,4 GHz richiede una “Autorizzazione Generale”. Consultare http://www.comunicazioni.it/ per maggiori dettagli.LatviaThe outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details.2,4 GHz frekveču joslas izmantošanai ārpus telpām nepieciešama atļauja no Elektronisko sakaru direkcijas. Vairāk informācijas: http://www.esd.lv.Notes:1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).Product Usage RestrictionsThis product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted.2,4 GHz RestrictionsThis product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment.Third-Party Software or FirmwareThe use of software or firmware not supported/provided by Cisco Consumer Products may result that the equipment is no longer compliant with the regulatory requirements.Technical Documents on www.myciscohome.comFollow these steps to access technical documents:1. Enter www.myciscohome.com in your web browser.2. Click Change your location, and select the country or region in which you live.3. Click the Products tab.4. Select the appropriate product category.5. Select the product sub-category, if necessary.6. Select the product.7. Select the type of documentation you want from the More Information section. The document will open in PDF format if you have Adobe Reader installed on your computer.NOTE: If you have questions regarding compliance of this product or you cannot find the information you need, visit http://home.cisco.com/wireless
5Linksys Dual-Band N Routers and BridgesWEEE InformationUser Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE)This document contains important information for users with regards to the proper disposal and recycling of Cisco home networking products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:English - Environmental Information for Customers in the European UnionEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.Български (Bulgarian) - Информация относно опазването на околната среда за потребители в Европейския съюзЕвропейска директива 2002/96/EC изисква уредите, носещи този символ върху изделието и/или опаковката му, да не се изхвърля т с несортирани битови отпадъци. Символът обозначава, че изделието трябва да се изхвърля отделно от сметосъбирането на обикновените битови отпадъци. Ваша е отговорността този и другите електрически и електронни уреди да се изхвърлят в предварително определени от държавните или общински органи специализирани пунктове за събиране. Правилното изхвърляне и рециклиране ще спомогнат да се предотвратят евентуални вредни за околната среда и здравето на населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда.Čeština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unieEvropská směrnice 2002/96/ES zakazuje, aby zařízení označené tímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává, že daný produkt musí být likvidován odděleně od běžného komunálního odpadu. Odpovídáte za likvidaci tohoto produktu a dalších elektrických a elektronických zařízení prostřednictvím určených sběrných míst stanovených vládou nebo místními úřady. Správná likvidace a recyklace pomáhá předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení si laskavě vyžádejte od místních úřadů, podniku zabývajícího se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili.Dansk (Danish) - Miljøinformation for kunder i EUEU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder. Korrekt bortskaffelse og genvinding vil hjælpe med til at undgå mulige skader for miljøet og menneskers sundhed. Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har købt produktet, angående mere detaljeret information om bortskaffelse af dit gamle udstyr.Deutsch (German) - Umweltinformation für Kunden innerhalb der Europäischen UnionDie Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.
6Linksys Dual-Band N Routers and BridgesEesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientideleEuroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike ametiasutuste poolt ette nähtud kogumispunktide kaudu. Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida võimalikke negatiivseid tagajärgi keskkonnale ning inimeste tervisele. Vanade seadmete kõrvaldamise kohta täpsema informatsiooni saamiseks võtke palun ühendust kohalike ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te toote ostsite.Español (Spanish) - Información medioambiental para clientes de la Unión EuropeaLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής ΈνωσηςΣύφωνα ε την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισό που φέρει αυτό το σύβολο στο προϊόν ή/και τη συσκευασία του δεν πρέπει να απορρίπτεται αζί ε τα η διαχωρισένα αστικά απορρίατα. Το σύβολο υποδεικνύει ότι αυτό το προϊόν θα πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά απορρίατα. Είστε υπεύθυνο για την απόρριψη του παρόντο και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισού έσω των καθορισένων εγκαταστάσεων συγκέντρωση απορριάτων, οι οποίε ορίζονται από το κράτο ή τι αρόδιε τοπικέ αρχέ. Η σωστή απόρριψη και ανακύκλωση συβάλλει στην πρόληψη ενδεχόενων αρνητικών επιπτώσεων στο περιβάλλον και την υγεία. Για περισσότερε πληροφορίε σχετικά ε την απόρριψη του παλαιού σα εξοπλισού, επικοινωνήστε ε τι τοπικέ αρχέ, τι υπηρεσίε αποκοιδή απορριάτων ή το κατάστηα από το οποίο αγοράσατε το προϊόν.Français (French) - Informations environnementales pour les clients de l’Union européenneLa directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.Italiano (Italian) - Informazioni relative all’ambiente per i clienti residenti nell’Unione EuropeaLa direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.Latviešu valoda (Latvian) - Ekoloģiska informācija klientiem Eiropas Savienības jurisdikcijāDirektīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo un citas elektriskas un elektroniskas ierīces izmest atkritumos, izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos un pārstrāde tiek veikta pareizi, tad mazinās iespējamais kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, kur iegādājāties šo izstrādājumu.
7Linksys Dual-Band N Routers and BridgesLietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojamsEuropos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ši ir kita elektros ar elektroninė įranga būtų šalinama per tam tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose įsigijote tą gaminį.Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti fl-Unjoni Ewropea Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika li dan il-prodott għandu jintrema separatament minn ma’ l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew il-ħanut minn fejn xtrajt il-prodott.Magyar (Hungarian) - Környezetvédelmi információ az európai uniós vásárlók számáraA 2002/96/EC számú európai uniós irányelv megkívánja, hogy azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott termék kidobásakor a szokványos háztartási hulladékelszállítási rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos és elektronikus berendezéseit a kormányzati vagy a helyi hatóságok által kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ hulladékfeldolgozás segít a környezetre és az emberi egészségre potenciálisan ártalmas negatív hatások megelõzésében. Ha elavult berendezéseinek felszámolásához további részletes információra van szüksége, kérjük, lépjen kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta.Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese UnieDe Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft.Norsk (Norwegian) - Miljøinformasjon for kunder i EUEU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for husholdningsavfall. Det er ditt ansvar å kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer. Korrekt avfallshåndtering og gjenvinning vil være med på å forhindre mulige negative konsekvenser for miljø og helse. For nærmere informasjon om håndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjøpte produktet.Polski (Polish) - Informacja dla klientów w Unii Europejskiej o przepisach dotyczących ochrony środowiskaDyrektywa Europejska 2002/96/EC wymaga, aby sprzęt oznaczony symbolem znajdującym się na produkcie i/lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, że produkt nie powinien być usuwany razem ze zwykłymi odpadami z gospodarstw domowych. Na Państwu spoczywa obowiązek wyrzucania tego i innych urządzeń elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez władze krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób i jego recykling pomogą zapobiec potencjalnie negatywnym konsekwencjom dla środowiska i zdrowia ludzkiego. W celu uzyskania szczegółowych informacji o usuwaniu starego sprzętu, prosimy zwrócić się do lokalnych władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty.
8Linksys Dual-Band N Routers and BridgesPortuguês (Portuguese) - Informação ambiental para clientes da União EuropeiaA Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares. É da sua responsabilidade eliminar este e qualquer outro equipamento eléctrico e electrónico através das instalações de recolha designadas pelas autoridades governamentais ou locais. A eliminação e reciclagem correctas ajudarão a prevenir as consequências negativas para o ambiente e para a saúde humana. Para obter informações mais detalhadas sobre a forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto.Română (Romanian) - Informaţii de mediu pentru clienţii din Uniunea EuropeanăDirectiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să nu fie casate împreună cu gunoiul menajer municipal. Simbolul indică faptul că acest produs trebuie să fie casat separat de gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi acest produs şi alte echipamente electrice şi electronice prin intermediul unităţilor de colectare special desemnate de guvern sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta la prevenirea potenţialelor consecinţe negative asupra sănătăţii mediului şi a oamenilor. Pentru mai multe informaţii detaliate cu privire la casarea acestui echipament vechi, contactaţi autorităţile locale, serviciul de salubrizare sau magazinul de la care aţi achiziţionat produsul.Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej úniiPodľa európskej smernice 2002/96/ES zariadenie s týmto symbolom na produkte a/alebo jeho balení nesmie byť likvidované spolu s netriedeným komunálnym odpadom. Symbol znamená, že produkt by sa mal likvidovať oddelene od bežného odpadu z domácností. Je vašou povinnosťou likvidovať toto i ostatné elektrické a elektronické zariadenia prostredníctvom špecializovaných zberných zariadení určených vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia pomôže zabrániť prípadným negatívnym dopadom na životné prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov alebo obchod, v ktorom ste si produkt zakúpili.Slovenščina (Slovene) - Okoljske informacije za stranke v Evropski unijiEvropska direktiva 2002/96/ES prepoveduje odlaganje opreme s tem simbolom – na izdelku in/ali na embalaži z nesortiranimi komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek zavreči ločeno od preostalih gospodinjskih odpadkov. Vaša odgovornost je, da to in preostalo električno in elektronsko opremo oddate na posebna zbirališča, ki jih določijo državne ustanove ali lokalne oblasti. S pravilnim odlaganjem in recikliranjem boste preprečili morebitne škodljive vplive na okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali trgovino, kjer ste izdelek kupili.Suomi (Finnish) - Ympäristöä koskevia tietoja EU-alueen asiakkailleEU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana. Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemällä tuote tai tuotteet viranomaisten määräämään keräyspisteeseen. Laitteiston oikea hävittäminen estää mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä myymälästä, josta ostit tuotteen.Svenska (Swedish) - Miljöinformation för kunder i Europeiska unionenDet europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Det faller på ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning på fastställda insamlingsplatser utsedda av regeringen eller lokala myndigheter. Korrekt kassering och återvinning skyddar mot eventuella negativa konsekvenser för miljön och personhälsa. För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken där du köpte produkten.WEB: For additional information, please visit http://home.cisco.com/wireless 110420NC-MS3425-01439
www.linksys.com/supportCisco, the Cisco Logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.© 2011 Cisco and/or its affiliates. All rights reserved.

Navigation menu