LINKSYS EA2700 Linksys EA2700 Dual-Band N600 Router with Gigabit User Manual Linksys EA Series User Guide
LINKSYS LLC Linksys EA2700 Dual-Band N600 Router with Gigabit Linksys EA Series User Guide
LINKSYS >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1633253 |
| Application ID | yZ/cy/tSutueYy5626Eyew== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 199.74kB (2496738 bits) |
| Date Submitted | 2012-02-08 00:00:00 |
| Date Available | 2012-03-30 00:00:00 |
| Creation Date | 2012-01-05 20:30:02 |
| Producing Software | PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] |
| Document Lastmod | 2012-02-06 17:21:47 |
| Document Title | Linksys EA-Series User Guide |
| Document Creator | Adobe InDesign CS4 (6.0.6) |
| Document Author: | Linksys Documentation |
User Guide Linksys EA-Series Linksys EA-Series Table of Contents Table of Contents Product overview Wireless Security EA2700/EA3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back view Bottom view EA4500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Top view Back view Wireless > Wireless Security . . . . . . . . . . . . . . . . . . . . . . . 7 Personal options Office options Option settings Troubleshooting How to manually set up your router . . . . . . . . . . . . . . . . . . 3 How to run Cisco Connect after setup . . . . . Your router was not successfully set up . . . . Get Windows XP Service Pack 3 message . . . . Your Internet cable is not plugged in message . Cannot access your router message . . . . . . . Device not found message . . . . . . . . . . . . . Advanced Configuration Specifications How to open the browser-based utility . . . . . . . . . . . . . . . . 4 Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Linksys EA2700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Linksys EA3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Linksys EA4500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setting Up Your EA-Series Router Where to find more help . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to set up your router . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to start Cisco Connect Use Cisco Connect to manage your router Language Internet Setup 10 11 11 12 13 14 Wireless > Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . 6 Wireless Settings Linksys EA-Series Product overview Product overview EA2700/EA3500 •• Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection. Flashes quickly when there is a Wi‑Fi Protected Setup error. •• Power—Connect the included AC power adapter to this port. Caution Use only the adapter that came with your router. Back view •• Power button—Press | (on) to turn on the router. Bottom view Power port USB port (EA3500 only) Internet port Ethernet ports Power indicator Wi-Fi Protected Setup button Your router’s appearance may vary •• USB port (EA3500 only)—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port. •• Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network. •• Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem. Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8. Your router’s appearance may vary •• Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility. Linksys EA-Series Product overview EA4500 Back view Top view Ethernet ports Internet port Power port Wi-Fi Protected Setup button Reset button USB port •• Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network. •• Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem. •• Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8. •• USB port—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port. •• Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility. •• Power—Connect the included AC power adapter to this port. Indicator light •• Indicator light—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Pulses slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection. Flashes quickly when there is a Wi‑Fi Protected Setup error. Caution Use only the adapter that came with your router. •• Power button—Press | (on) to turn on the router. Linksys EA-Series Setting Up Your EA-Series Router Setting Up Your EA-Series Router Where to find more help In addition to this User Guide, you can find help at these locations: •• Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) •• Cisco Connect help (run Cisco Connect, then click Learn More where available) •• Browser-based utility context-sensitive help (open the utility, then click Help in the right-side column.) To start Cisco Connect for the first time: 1. Insert the CD into your CD or DVD drive. 2. Click Set up your Linksys Router. If you do not see this: •• For Windows, click Start, Computer, then double-click the CD drive and the Setup icon. •• For Mac, double-click the CD icon on your desktop, then double-click the Setup icon. 3. Follow the on-screen instructions to complete your router setup. How to set up your router The easiest and fastest way to set up your router is to run the Cisco Connect setup software. How to start Cisco Connect When you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer. You can then use Cisco Connect to easily manage your router. Note: If you lose your setup CD, you can download the software from Linksys.com/support. Use Cisco Connect to manage your router After your router has been set up and Cisco Connect has been installed, you can use Cisco Connect to easily manage many of your router’s settings such as: •• Connect devices to your network •• Test your Internet connection speed •• Configure parental controls •• Set up guest access •• Change your router’s name and password How to manually set up your router After setting up the router with the setup software (located on the CD), the router will be ready for use. If you would like to change its advanced settings, or if the software does not run, use the router’s browser-based utility.You can access the utility with a web browser on a computer connected to the router. For more information on using the utility, see “How to open the browser-based utility” on page 3. Linksys EA-Series Advanced Configuration Advanced Configuration How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility. To open the browser-based utility: 1. Run Cisco Connect, click Change under Router settings, click Advanced settings, then click OK. – or – 2. Enter the user name and password, then click OK. The utility’s main menu opens. Tips If you set up your router without using Cisco Connect, your router’s default username and password is admin. If you used Cisco Connect to set up your router, you can see your router’s user name and password by running Cisco Connect, then clicking Router settings. Open a web browser on a computer connected to your network, then go to 192.168.1.1. The router prompts you for a user name and password. Linksys EA-Series Advanced Configuration Setup > Basic Setup Internet Setup The first screen that appears is the Basic Setup screen. This allows you to change the router’s general settings. The Internet Setup section configures the router to your Internet connection. Most of this information can be obtained through your Internet Service Provider (ISP). Internet Connection Type Select the type of Internet connection your ISP provides from the drop-down menu. The available types are: •• Automatic Configuration - DHCP •• Static IP •• PPPoE •• PPTP •• L2TP •• Bridge Mode Automatic Configuration - DHCP The default Internet Connection Type is Automatic Configuration - DHCP (Dynamic Host Configuration Protocol). Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.) Static IP If you are required to use a fixed IP address to connect to the Internet, select Static IP. PPPoE Language Select your language To use a different language, select one from the dropdown menu. The language of the browser-based utility will change five seconds after you select another language. If you have a DSL connection, check whether your ISP uses Point-to-Point Protocol over Ethernet (PPPoE). If so, select PPPoE. PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, then select Obtain an IP Address Automatically. If you are required to use a fixed IP address to connect to the Internet, then select Specify an IP Address and configure the options below. Linksys EA-Series Advanced Configuration L2TP •• Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel. Wireless-N Only If you have only Wireless-N (2.4 GHz) devices, select Wireless-N Only. •• Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) devices in your network, select Disabled. Connect on Demand or Keep Alive The Connect on Demand and Keep Alive options let you choose whether the router connects to the Internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected. Select the appropriate option. Wireless > Wireless Settings The settings for wireless networking are set on this screen. Note After you set up the wireless network(s), set up the wireless security settings. Wireless Settings Note If you have a dual-band router, you can select Mixed, Wireless-A Only, Wireless-N Only, or Disabled for the 5 GHz band. If you are not sure which mode to use, keep the default, Mixed. Network Name (SSID) The Service Set Identifier (SSID) is the network name shared by all devices in a wireless network. It is case-sensitive and must not exceed 32 keyboard characters. The default is Cisco followed by the last 5 digits of the router’s serial number, which is found on the bottom of the router. If you used the setup software for installation, then the default Network Name is changed to an easy-to-remember name. Note If you restore the router’s factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value. Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name. Channel Width For best performance in a network using Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices, select Auto (20 MHz or 40 MHz). For a channel width of 20 MHz, select 20 MHz only. Network Mode Select the wireless standards your network will support. •• Mixed If you have Wireless-N (2.4 GHz), Wireless-G, and Wireless-B devices in your network, keep the default, Mixed. •• Wireless-B/G Only If you have both Wireless-B and Wireless-G (2.4 GHz) devices in your network, select Wireless-B/G Only. •• Wireless-B Only If you have only Wireless-B devices, select Wireless-B Only. •• Wireless-G Only If you have only Wireless-G devices, select Wireless-G Only. Channel Select the channel from the drop-down list for Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) networking. If you are not sure which channel to select, then keep the default, Auto. SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router. To broadcast the router’s SSID, keep the default, Enabled. If you do not want to broadcast the router’s SSID, then select Disabled. Linksys EA-Series Wireless Security Wireless Security Wireless > Wireless Security Option settings The wireless security settings configure the security of your wireless network(s). The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS. (WPA stands for Wi-Fi Protected Access. WEP stands for Wireless Equivalent Privacy. RADIUS stands for Remote Authentication Dial-In User Service.) WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal Notes If you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase. If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase. Personal options Security Option Strength WPA2 Personal Strongest WPA2/WPA Mixed Mode WPA2: Strongest WPA: Strong WPA Personal Strong WEP Basic Office options The office options are available for networks that use a RADIUS server for authentication. The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication. Security Option Strength WPA2 Enterprise Strongest WPA2/WPA Enterprise Mixed Mode WPA2: Strongest WPA: Strong WPA Enterprise Strong RADIUS Basic If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase. Passphrase Enter a passphrase of 8-63 characters. The default is password. If you used the setup software for installation, then the default is changed to a unique passphrase, which you can find by running Cisco Connect, then clicking Router settings. Linksys EA-Series WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise These option is used in coordination with a RADIUS server. (These should only be used when a RADIUS server is connected to the router.) NoteS If you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key. Wireless Security WEP WEP is a basic encryption method, which is not as secure as WPA. Note: If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key. If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key. If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. RADIUS Server Enter the IP address of the RADIUS server. TX Key Select a default TX (Transmit) Key to use. The default is 1. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Key Enter the key shared between the router and the server. Linksys EA-Series Wireless Security RADIUS Disabled This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the router.) If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet. You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security. Note: If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key. RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Secret Enter the key shared between the router and the server. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key Select a default TX (Transmit) Key to use. The default is 1. Linksys EA-Series Troubleshooting Troubleshooting This chapter can help you solve common setup issues and connect to the Internet. Your router’s CD includes Cisco Connect, the router setup software that makes it easy to connect network devices, change router settings, control guest access, enable parental controls, and connect to the Internet. Cisco Connect is also installed onto your computer during setup. If Cisco Connect is prevented from completing the setup, this chapter will guide you through finding solutions. How to run Cisco Connect after setup When you run the setup CD, Cisco Connect is automatically installed onto your computer. You can then use Cisco Connect to easily manage your network. To start Cisco Connect on a Windows computer: 1. Click Start, All Programs, then click Cisco Connect. The Cisco Connect main menu opens. To start Cisco Connect on a Mac OS X computer: 1. Open Finder and click Applications in the left panel. 2. Double-click the Cisco Connect icon. You can find more help from our award-winning customer support at linksys.com/support. The Cisco Connect main menu opens. 10 Linksys EA-Series Troubleshooting Your router was not successfully set up •• Temporarily disable your computer’s firewall (see the security software’s instructions for help), then run the Setup program again on the router’s CD. •• If you have another computer, use that computer to run the Setup program again on the router’s CD. Get Windows XP Service Pack 3 message On Windows XP computers, Cisco Connect requires Service Pack 3 in order to work. If you receive a “Get Windows Service Pack 3” message when setting up your router for the first time, follow these troubleshooting steps. If Cisco Connect did not complete the setup, you can try the following: •• Press and hold the Reset button on your router with a paperclip or pin for 5-15 seconds, then run the Setup program again on the router’s CD. If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3. TIP To temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem. To install Service Pack 3: 1. Click the link in the Cisco Connect error message or connect to the Microsoft Update website (update.microsoft.com/windowsupdate). 2. Follow the instructions on the website or contact Microsoft if you need further help. Your router’s appearance may vary 3. After downloading and installing Service Pack 3, run the Setup program on your router’s CD. 11 Linksys EA-Series Troubleshooting Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. Back view of cable modem Back view of DSL modem 2. Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position. 3. If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. To fix the problem: 1. Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port. 4. If your computer was previously connected to your modem with a USB cable, disconnect the USB cable. 5. Return to the Cisco Connect window and click Next to try again. If the window has already been closed, run the Setup program again on the router’s CD. Back view of router 12 Linksys EA-Series Cannot access your router message If you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps. Troubleshooting 3. Click your own network name, then click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected. To access your router, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network. To fix the problem on Windows computers: 1. On your Windows desktop, right-click the wireless icon in the system tray. 4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields, then click Connect. 2. Click View Available Wireless Networks. A list of available networks appears. Your computer connects to the network, and you should now be able to access the router. 13 Linksys EA-Series To fix the problem on Mac computers: 1. In the menu bar across the top of the screen, click the AirPort icon. A list of wireless networks appears. Cisco Connect has automatically assigned your network a name. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected. 2. Click the wireless network name of your Linksys E-Series router (BronzeEagle in the example). 3. Type your wireless network password (Security Key) into the Password field, then click OK. Troubleshooting Device not found message If you get a “Device not found” message when trying to connect a network device (such as an iPhone, iPod, or smartphone), follow these troubleshooting steps. TIP For a stronger signal during initial setup, move your wireless devices near your router. Long distances make it harder for the router to detect the devices. To fix the problem: 1. Run Cisco Connect. 14 Linksys EA-Series 2. Click Computers and devices. The Computers and other devices window appears. 3. Click Other Wireless devices. Troubleshooting Example: On your Smartphone or other wireless device, locate the WiFi menu and search for available wireless networks. In this example, using the network information provided by Cisco Connect shown in the previous screen, click BronzeEagle. Android 4. Enable your wireless network device’s Wi-Fi connection, then search for your wireless network name. See your device documentation for help. Note Your wireless device must support WPA/WPA2. 5. On the wireless network device, select the network name of your router and enter the password (Security Key). 6. In Cisco Connect, click Next. iPhone 7. Enter the password (Security Key) provided by Cisco Connect. In this example, the security key is B6eM9UkCjz. Note The password is case sensitive. Make sure that you enter letters in the correct case. 8. When your wireless device is successfully connected to your wireless network, enter a name for the device in Cisco Connect, then click Finish. 15 Linksys EA-Series Specifications Specifications Linksys EA2700 Environmental Model Name Linksys EA2700 Description Dual-Band N600 Router with Gigabit Model Number EA2700 Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u, 802.3ab # of Antennas 4 total, 2 internal antennas per each 2.4 GHz & 5 GHz radio band Detachable (y/n) No Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM Receive Sensitivity (Typical) 2.4 GHz 802.11b: -90 dBm @ 11 Mbps 802.11g: -75 dBm @ 54 Mbps 802.11n 20 MHz: -73 dBm @ MCS15 802.11n 40 MHz: -70 dBm @ MCS15 5 GHz 802.11a: -72 dBm @ 54 Mbps 802.11n 20 MHz: -70 dBm @ MCS15 802.11n 40 MHz: -67 dBm @ MCS15 Antenna Gain UPnP 2.4 GHz Antenna 1 ≤ 3.45 dBi Antenna 2 ≤ 2.46 dBi 5 GHz Antenna 1 ≤ 5.15 4.41 dBi Antenna 2 ≤ 3.60 5.15 dBi Supported Security features WEP, WPA, WPA2 Security key bits Up to 128-bit encryption Dimensions 174 x 190 x 28 mm (6.85" x 7.48" x 1.10") Unit Weight 297.7 g (10.5 oz) Power 12V, 1A Certifications FCC, IC, CE, Wi-Fi A/B/G/N Operating Temp. 0 to 40°C (32 to 104°F) Storage Temp. -20 to 60°C (-4 to 140°F) Operating Humidity 10 to 80%, relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. 16 Linksys EA-Series Specifications Linksys EA3500 Environmental Model Name Linksys EA3500 Description Dual-Band N750 Router with Gigabit and USB Model Number EA3500 # of Antennas 6 total, 3 internal antennas per each 2.4 GHz & 5 GHz radio band Detachable (y/n) No Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Ports Internet, Ethernet (1-4), USB, Power Buttons Reset, Wi-Fi Protected Setup LEDs Power, Internet, Ethernet (1-4) Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM Receive Sensitivity 2.4 GHz 802.11b: -87 dBm @ 11 Mbps (Typical) 802.11g: -77 dBm @ 54 Mbps (Typical) 802.11n (20 MHz): -72 dBm @ MCS15 (Typical) 802.11n (40 MHz): -69 dBm @ MCS15 (Typical) 5 GHz 802.11a: -74 dBm @ 54 Mbps (Typical) 802.11n 20 MHz: -67 dBm @ MCS23 (Typical) 802.11n 40 MHz: -64 dBm @ MCS23 (Typical) Antenna Gain Dimensions 6.69" x 0.98" x 7.48" (170 x 25 x 190 mm) Unit Weight 11.5 oz (326 g) Power 12V, 2A Certifications FCC, IC, CE, Wi-Fi A/B/G/N, Windows 7 Operating Temp. 32 to 95°F (0 to 35°C) Storage Temp. -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. 2.4 GHz (Dipole Antennas) Antenna 1 ≤ 2.70 dBi Antenna 2 ≤ 3.70 dBi Antenna 3 ≤ 4.95 dBi 5 GHz (Dipole Antennas) Antenna 1 ≤ 4.46 dBi Antenna 2 ≤ 3.23 dBi Antenna 3 ≤ 3.88 dBi UPnP Supported Security features Security key bits WEP, WPA, WPA2 Up to 128-bit encryption Storage File System Support FAT, and NTFS, and HFS+ 17 Linksys EA-Series Specifications Linksys EA4500 Supported File Systems for Storage Device FAT32, NTFS, and HFS+ Model Name Linksys EA4500 UPnP Supported Description Dual-Band N900 Router with Gigabit and USB Security Features WEP, WPA, WPA2 Model Number EA4500 Security Key Bits Up to 128-bit encryption Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u, 802.3ab Environmental Radio Frequency 2.4 and 5 GHz Dimensions Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) 8.86" x 0.98" x 6.30" (225 x 25 x 160 mm) Ports Power, USB, Internet, Ethernet (1-4) Unit Weight 12.7 oz (360 g) Buttons Reset, Wi-Fi Protected Setup Power 12V, 2A LEDs Top panel: Power Back panel: Internet, Ethernet (1-4) Certifications FCC, IC, CE, Wi-Fi a/b/g/n, Windows 7, DLNA Number of Antennas 6 total, 3 internal antennas per each 2.4 GHz and 5 GHz radio band No Operating Temp. 32 to 104°F (0 to 40°C) Storage Temp. -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing Detachable (y/n) Modulations Receive Sensitivity 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM 802.11n: BPSK, QPSK, 16-QAM, 64‑QAM 2.4 GHz 802.11b: -87 dBm @ 11 Mbps (Typical) 802.11g: -77 dBm @ 54 Mbps (Typical) 802.11n: 20 MHz: -70 dBm @ MCS23 (Typical) 802.11n: 40 MHz: -66 dBm @ MCS23 (Typical) 5 GHz 802.11a: -74 dBm @ 54 Mbps (Typical) 802.11n: 20 MHz: -67 dBm @ MCS23 (Typical) 802.11n: 40 MHz: -64 dBm @ MCS23 (Typical) Antenna Gain in dBi 2.4 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3.31 dBi (Right) PIFA 2 ≤ 3.45 dBi (Front) PIFA 3 ≤ 1.96 dBi (Left) 5 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3.71 dBi (Right) PIFA 2 ≤ 3.60 dBi (Front) PIFA 3 ≤ 4.27 dBi (Left) NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. 18 Visit linksys.com/support for award-winning technical support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners. © 2012 Cisco and/or its affiliates. All rights reserved. 3425-01602 Linksys Dual-Band N Routers and Bridges Regulatory Information Linksys Dual-Band N Routers and Bridges Table of Contents Wireless Regulatory Information FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Avis d’Industrie Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Avis de non-responsabilité concernant les appareils sans fil . . . . . . . . . . . . . . . . . . . 2 Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) . . . 2 Wireless Equipment (Wireless-N/G/A/B Products) . . . . . . . . . . . . . . . . . . . . . . . . . . 3 National Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Usage Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Technical Documents on http://home.cisco.com/wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Linksys Dual-Band N Routers and Bridges Wireless Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •• Reorient or relocate the receiving antenna •• Increase the separation between the equipment or devices •• Connect the equipment to an outlet other than the receiver’s •• Consult a dealer or an experienced radio/TV technician for assistance Safety Notices WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003 and RSS210. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada Radiation Exposure Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. Restrictions in the 5 GHz Band FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to cochannel mobile satellite systems. Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650‑5850 MHz, these radars could cause interference and/or damage to licensed exempt LAN devices. Additional requirements for the band 5600-5650 MHz: Until further notice, devices subject to this Section shall not be capable of transmitting in the band 56005650 MHz, so that Environment Canada weather radars operating in this band are protected. Linksys Dual-Band N Routers and Bridges Avis d’Industrie Canada Cet appareil numérique de la classe B est conforme aux normes NMB-003 et RSS210 du Canada. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : 1. il ne doit pas produire de brouillage et 2. il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Avis d’Industrie Canada concernant l’exposition aux radiofréquences Ce matériel est conforme aux limites établies par IC en matière d’exposition aux radiofréquences dans un environnement non contrôlé. Ce matériel doit être installé et utilisé à une distance d’au moins 20 cm entre l’antenne et le corps de l’utilisateur. L’émetteur ne doit pas être placé près d’une autre antenne ou d’un autre émetteur, ou fonctionner avec une autre antenne ou un autre émetteur. Restrictions dans la bande 5 GHz L’appareil pour la bande de 5150 à 5250 MHz est conçu pour usage à l’intérieur seulement afin de réduire le potentiel d’interférences pour les systèmes mobiles par satellite qui utilisent le même canal. Du fait que les radars haute puissance ont la priorité dans les bandes 5250-5350 MHz et 5650-5850 MHz, ils pourraient causer des interférences ou endommager les périphériques réseau sans fil. Autres restrictions pour la bande 5 600-5 650 MHz : sauf avis contraire, les périphériques concernés par cette section ne doivent pas être capables de transmettre dans la bande 5 600-5 650 MHz afin de protéger les radars d’Environnement Canada qui l’utilisent. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Avis de non-responsabilité concernant les appareils sans fil Les performances réelles peuvent varier, notamment en fonction de la capacité du réseau sans fil, du débit de la transmission de données, de la portée et de la couverture. Les performances dépendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point d’accès, du volume du trafic réseau, des matériaux utilisés dans le bâtiment et du type de construction, du système d’exploitation et de la combinaison de produits sans fil utilisés, des interférences et de toute autre condition défavorable. Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance Information for Cisco Consumer Products (2,4 and 5 GHz) Relevant to the European Union and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Това оборудване отговаря на съществените Български изисквания и приложими клаузи на [Bulgarian] Директива 1999/5/ЕС. Česky [Czech]: Toto zařízení je v souladu se základními požadavky a ostatními odpovídajícími ustanoveními Směrnice 1999/5/EC. Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Eesti [Estonian]: See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele. English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. Ελληνική [Greek]: Αυτός ο εξοπλισµός είναι σε συµµόρφωση µε τις ουσιώδεις απαιτήσεις και άλλες σχετικές διατάξεις της Οδηγίας 1999/5/EC. Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. Les performances maximales pour les réseaux sans fil sont tirées des spécifications de la norme IEEE 802.11. Linksys Dual-Band N Routers and Bridges Íslenska [Icelandic]: Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC. Italiano [Italian]: Questo apparato è conforme ai requisiti essenziali e agli altri principi sanciti dalla Direttiva 1999/5/CE. For all products, the Declaration of Conformity (DofC) is available through one or more of these options: •• A pdf file is included on the product’s CD. Latviski [Latvian]: Šī iekārta atbilst Direktīvas 1999/5/ EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. •• A print copy is included with the product. •• Lietuvių [Lithuanian]: Šis įrenginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas šios direktyvos nuostatas. A pdf file is available on the product’s webpage. Visit http://home.cisco.com/wireless and select your country or region. Then select your product. Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. Malti [Maltese]: Dan l-apparat huwa konformi mal-ħtiġiet essenzjali u l-provedimenti l-oħra rilevanti tad-Direttiva 1999/5/EC. Magyar [Hungarian]: Ez a készülék teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben meghatározott vonatkozó rendelkezéseket. Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE: 1999/5/EC. Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. Română [Romanian] Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC. Slovensko [Slovenian]: Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC. Slovensky [Slovak]: Toto zariadenie je v zhode so základnými požiadavkami inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi [Finnish]: Tämä laite täyttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen. Svenska [Swedish]: Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC. If you need any other technical documentation, see the “Technical Documents on http://home.cisco.com/wireless” section, as shown later in this document. Wireless Equipment (Wireless-N/G/A/B Products) The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC: •• Radio: EN 300 328 and/or EN 301 893 as applicable •• EMC: EN 301 489-1, EN 301 489-17 •• Safety: EN 60950-1 and either EN 50385 or EN 50371 For the Cisco Wireless-N, -G, -B, and/or -A products, the following CE mark and class 2 identifier are added to the equipment. National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci‑dessous: Questo prodotto è utilizzabile in tutti i paesi EU (e in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesi menzionati di seguito: Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten: In the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the use of wireless local area networks (LANs). The Overview of Regulatory Requirements for Wireless LANs table provides an overview of the regulatory requirements applicable for the 2,4‑ and 5-GHz bands. Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. Cisco Consumer Products recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4and 5-GHz wireless LANs. Linksys Dual-Band N Routers and Bridges Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz)† Max Power Level (EIRP) (mW) 2400-2483,5 100 5150-5350 200 5470-5725 1000 † Indoor ONLY Indoor & Outdoor †Dual band versions which can also operate in the 5 GHz band are limited to only operate within the band 5150-5250 MHz and as such are restricted to indoor use only (except Denmark). The following countries have restrictions and/or requirements in addition to those given in the Overview of Regulatory Requirements for Wireless LANs table: Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs. France For 2,4 GHz, the product should not be used outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band OR when used indoors. Check http://www.arcep.fr/ for more details. Pour la bande 2,4 GHz, l’ équipement ne doit pas être utilisé en extérieur dans la bande 2454 - 2483,5 MHz. Il n’y a aucune restriction pour son utilisation dans d’autres parties de la bande des 2,4 GHz ainsi que pour une utilisation en intérieur. Consultez http://www.arcep.fr/ pour de plus amples détails. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owner’s property, its use requires a “general authorization”. Please check http://www.comunicazioni.it/ for more details. Questo prodotto è conforme alle specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2,4 GHz richiede una “Autorizzazione Generale”. Consultare http://www.comunicazioni.it/ per maggiori dettagli. Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details. 2,4 GHz frekveču joslas izmantošanai ārpus telpām nepieciešama atļauja no Elektronisko sakaru direkcijas. Vairāk informācijas: http://www.esd.lv. Notes: 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). Product Usage Restrictions This product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted. 2,4 GHz Restrictions This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. Third-Party Software or Firmware The use of software or firmware not supported/provided by Cisco Consumer Products may result that the equipment is no longer compliant with the regulatory requirements. Technical Documents on www.myciscohome.com Follow these steps to access technical documents: 1. Enter www.myciscohome.com in your web browser. 2. Click Change your location, and select the country or region in which you live. 3. Click the Products tab. 4. Select the appropriate product category. 5. Select the product sub-category, if necessary. 6. Select the product. 7. Select the type of documentation you want from the More Information section. The document will open in PDF format if you have Adobe Reader installed on your computer. NOTE: If you have questions regarding compliance of this product or you cannot find the information you need, visit http://home.cisco.com/wireless 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. Linksys Dual-Band N Routers and Bridges WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Cisco home networking products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: Čeština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unie Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené tímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává, že daný produkt musí být likvidován odděleně od běžného komunálního odpadu. Odpovídáte za likvidaci tohoto produktu a dalších elektrických a elektronických zařízení prostřednictvím určených sběrných míst stanovených vládou nebo místními úřady. Správná likvidace a recyklace pomáhá předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení si laskavě vyžádejte od místních úřadů, podniku zabývajícího se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili. Dansk (Danish) - Miljøinformation for kunder i EU English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Български (Bulgarian) - Информация относно опазването на околната среда за потребители в Европейския съюз Европейска директива 2002/96/EC изисква уредите, носещи този символ върху изделието и/или опаковката му, да не се изхвърля т с несортирани битови отпадъци. Символът обозначава, че изделието трябва да се изхвърля отделно от сметосъбирането на обикновените битови отпадъци. Ваша е отговорността този и другите електрически и електронни уреди да се изхвърлят в предварително определени от държавните или общински органи специализирани пунктове за събиране. Правилното изхвърляне и рециклиране ще спомогнат да се предотвратят евентуални вредни за околната среда и здравето на населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда. EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder. Korrekt bortskaffelse og genvinding vil hjælpe med til at undgå mulige skader for miljøet og menneskers sundhed. Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har købt produktet, angående mere detaljeret information om bortskaffelse af dit gamle udstyr. Deutsch (German) - Umweltinformation für Kunden innerhalb der Europäischen Union Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben. Linksys Dual-Band N Routers and Bridges Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele Français (French) - Informations environnementales pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike ametiasutuste poolt ette nähtud kogumispunktide kaudu. Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida võimalikke negatiivseid tagajärgi keskkonnale ning inimeste tervisele. Vanade seadmete kõrvaldamise kohta täpsema informatsiooni saamiseks võtke palun ühendust kohalike ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te toote ostsite. La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit. Español (Spanish) - Información medioambiental para clientes de la Unión Europea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto. Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Σύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που φέρει αυτό το σύμβολο στο προϊόν ή/και τη συσκευασία του δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων, οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές. Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη ενδεχόμενων αρνητικών επιπτώσεων στο περιβάλλον και την υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη του παλαιού σας εξοπλισμού, επικοινωνήστε με τις τοπικές αρχές, τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα από το οποίο αγοράσατε το προϊόν. Italiano (Italian) - Informazioni relative all’ambiente per i clienti residenti nell’Unione Europea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Latviešu valoda (Latvian) - Ekoloģiska informācija klientiem Eiropas Savienības jurisdikcijā Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo un citas elektriskas un elektroniskas ierīces izmest atkritumos, izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos un pārstrāde tiek veikta pareizi, tad mazinās iespējamais kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, kur iegādājāties šo izstrādājumu. Linksys Dual-Band N Routers and Bridges Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ši ir kita elektros ar elektroninė įranga būtų šalinama per tam tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose įsigijote tą gaminį. De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft. Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti fl-Unjoni Ewropea Norsk (Norwegian) - Miljøinformasjon for kunder i EU Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika li dan il-prodott għandu jintrema separatament minn ma’ l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew il-ħanut minn fejn xtrajt il-prodott. EU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for husholdningsavfall. Det er ditt ansvar å kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer. Korrekt avfallshåndtering og gjenvinning vil være med på å forhindre mulige negative konsekvenser for miljø og helse. For nærmere informasjon om håndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjøpte produktet. Magyar (Hungarian) - Környezetvédelmi információ az európai uniós vásárlók számára Polski (Polish) - Informacja dla klientów w Unii Europejskiej o przepisach dotyczących ochrony środowiska A 2002/96/EC számú európai uniós irányelv megkívánja, hogy azokat a termékeket, amelyeken, és/vagy amelyek megjelenik, tilos a többi csomagolásán az alábbi címke szelektálatlan lakossági hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott termék kidobásakor a szokványos háztartási hulladékelszállítási rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos és elektronikus berendezéseit a kormányzati vagy a helyi hatóságok által kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ hulladékfeldolgozás segít a környezetre és az emberi egészségre potenciálisan ártalmas negatív hatások megelõzésében. Ha elavult berendezéseinek felszámolásához további részletes információra van szüksége, kérjük, lépjen kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta. Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt znajdującym się na produkcie i/ oznaczony symbolem lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, że produkt nie powinien być usuwany razem ze zwykłymi odpadami z gospodarstw domowych. Na Państwu spoczywa obowiązek wyrzucania tego i innych urządzeń elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez władze krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób i jego recykling pomogą zapobiec potencjalnie negatywnym konsekwencjom dla środowiska i zdrowia ludzkiego. W celu uzyskania szczegółowych informacji o usuwaniu starego sprzętu, prosimy zwrócić się do lokalnych władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty. Linksys Dual-Band N Routers and Bridges Português (Portuguese) - Informação ambiental para clientes da União Europeia Slovenščina (Slovene) - Okoljske informacije za stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares É da sua responsabilidade eliminar este e qualquer outro equipamento eléctrico e electrónico através das instalações de recolha designadas pelas autoridades governamentais ou locais A eliminação e reciclagem correctas ajudarão a prevenir as consequências negativas para o ambiente e para a saúde humana Para obter informações mais detalhadas sobre a forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s tem simbolom – na izdelku in/ali na embalaži z nesortiranimi komunalnimi odpadki Ta simbol opozarja, da je treba izdelek zavreči ločeno od preostalih gospodinjskih odpadkov Vaša odgovornost je, da to in preostalo električno in elektronsko opremo oddate na posebna zbirališča, ki jih določijo državne ustanove ali lokalne oblasti S pravilnim odlaganjem in recikliranjem boste preprečili morebitne škodljive vplive na okolje in zdravje ljudi Če želite izvedeti več o odlaganju stare opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali trgovino, kjer ste izdelek kupili Română (Romanian) - Informaţii de mediu pentru clienţii din Uniunea Europeană Directiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să nu fie casate împreună cu gunoiul menajer municipal Simbolul indică faptul că acest produs trebuie să fie casat separat de gunoiul menajer obişnuit Este responsabilitatea dvs să casaţi acest produs şi alte echipamente electrice şi electronice prin intermediul unităţilor de colectare special desemnate de guvern sau de autorităţile locale Casarea şi reciclarea corecte vor ajuta la prevenirea potenţialelor consecinţe negative asupra sănătăţii mediului şi a oamenilor Pentru mai multe informaţii detaliate cu privire la casarea acestui echipament vechi, contactaţi autorităţile locale, serviciul de salubrizare sau magazinul de la care aţi achiziţionat produsul Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej únii Podľa európskej smernice 2002/96/ES zariadenie s týmto symbolom na produkte a/alebo jeho balení nesmie byť likvidované spolu s netriedeným komunálnym odpadom Symbol znamená, že produkt by sa mal likvidovať oddelene od bežného odpadu z domácností Je vašou povinnosťou likvidovať toto i ostatné elektrické a elektronické zariadenia prostredníctvom špecializovaných zberných zariadení určených vládou alebo miestnymi orgánmi Správna likvidácia a recyklácia pomôže zabrániť prípadným negatívnym dopadom na životné prostredie a zdravie ľudí Ak máte záujem o podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov alebo obchod, v ktorom ste si produkt zakúpili Suomi (Finnish) - Ympäristöä koskevia tietoja EUalueen asiakkaille EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään tavallisesta kotitalousjätteestä Sinun vastuullasi on hävittää tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemällä tuote tai tuotteet viranomaisten määräämään keräyspisteeseen Laitteiston oikea hävittäminen estää mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten terveyteen Lisätietoja vanhan laitteiston oikeasta hävitystavasta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä myymälästä, josta ostit tuotteen Svenska (Swedish) - Miljöinformation för kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall Det faller på ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning på fastställda insamlingsplatser utsedda av regeringen eller lokala myndigheter Korrekt kassering och återvinning skyddar mot eventuella negativa konsekvenser för miljön och personhälsa För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken där du köpte produkten WEB: For additional information, please visit http://home.cisco.com/wireless 3425-01439 110420NC-MS www.linksys.com/support Cisco, the Cisco Logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third‑party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. © 2011 Cisco and/or its affiliates. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract Page Mode : UseOutlines XMP Toolkit : 3.1-701 Create Date : 2012:01:05 20:30:02-07:00 Metadata Date : 2012:02:06 17:21:47+08:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Modify Date : 2012:02:06 17:21:47+08:00 Format : application/pdf Title : Linksys EA-Series User Guide Description : EA2700, EA3500, EA4500 Creator : Linksys Documentation Subject : 120105MS Document ID : uuid:11ccb9f6-1cef-42ff-84ac-a72ebfe0300f Instance ID : uuid:baab0949-d85b-432f-b745-34e4fd341d37 Producer : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] Has XFA : No Page Count : 32 Page Layout : SinglePage Author : Linksys Documentation Keywords : 120105MSEXIF Metadata provided by EXIF.tools