LINKSYS WAP200E Wireless-G Exterior Access Point with POE User Manual WAP200E User Guide

Download:
Mirror Download [FCC.gov]
Document ID	788909
Application ID	svbFfa9U7iZRqL7tO9TB9w==
Document Description	Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	241.59kB (3019910 bits)
Date Submitted	2007-05-04 00:00:00
Date Available	2007-05-04 00:00:00
Creation Date	2007-05-04 08:50:31
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2007-05-04 10:02:35
Document Title	WAP200E User Guide
Document Creator	Adobe InDesign CS2 (4.0.4)
Document Author:	Linksys

Chapter 6
Advanced Configuration
Administration > Factory Default
On this screen you can restore the Access Point’s factory
default settings.
Administration > Firmware Upgrade
Firmware Upgrade
Administration > Factory Default
Factory Default
Note any custom settings before you restore the factory
defaults. Once the Access Point is reset, you will have to
re-enter all of your configuration settings.
Restore Factory Defaults To restore the Access Point’s
factory default settings, click the Yes radio button. Then,
click Save Settings. Your Access Point will reboot and
come back up with the factory default settings in a few
seconds.
Click Save Settings to apply your change, or click Cancel
Changes to cancel your change. Help information is
available on the right side of the screen.
Before you upgrade the Access Point’s firmware, note all of
your custom settings. After you upgrade its firmware, you
may have to re-enter all of your configuration settings. To
upgrade the Access Point’s firmware:
1. Download the firmware upgrade file from the Linksys
website, www.linksys.com.
2. Extract the firmware upgrade file on your computer.
3. On the Firmware Upgrade screen, enter the location of
the firmware upgrade file in the field provided, or click
the Browse button to find the file.
4. Click the Upgrade button, and follow the on-screen
instructions.
Help information is available on the right side of the
screen.
Administration > Firmware Upgrade
On this screen you can upgrade the Access Point’s firmware.
Do not upgrade the firmware unless you are experiencing
problems with the Access Point or the new firmware has a
feature you want to use.
Wireless-G Exterior Access Point with Power Over Ethernet
21
Advanced Configuration
Chapter 6
Administration > Reboot
Config Management
On this screen you can reboot the Access Point.
Use this screen to upload or download configuration files
for the Access Point.
Save Configuration To save a backup configuration file
on a computer, click the Save Configuration to File button
and follow the on-screen instructions.
Restore Configuration To upload a configuration file to
the Access Point, enter the location of the configuration
file in the field provided, or click the Browse button to find
the file. Then click the Load button.
Help information is available on the right side of the
screen.
Status > Local Network
Administration > Reboot
The Local Network screen displays the Access Point’s
current status information for the local network.
Reboot
This feature is useful when you need to remotely reboot
the Access Point.
Device Reboot To reboot the Access Point, click the Yes
option.
Click Save Settings to apply your change and the Access
Point will reboot itself, or click Cancel Changes to cancel
your change. Help information is available on the right
side of the screen.
Administration > Config Management
On this screen you can create a backup configuration file
or save a configuration file to the Access Point.
Information
Hardware Version This is the version of the Access Point’s
current hardware.
Software Version This is the version of the Access Point’s
current software.
Local MAC Address The MAC address of the Access
Point’s Local Area Network (LAN) interface is displayed
here.
System Up Time This is the length of time the Access
Point has been running.
Local Network
Administration > Config Management
Wireless-G Exterior Access Point with Power Over Ethernet
IP Address This shows the Access Point’s IP Address, as it
appears on your local network.
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2007:05:04 10:02:35-07:00
Create Date                     : 2007:05:04 08:50:31-07:00
Metadata Date                   : 2007:05:04 10:02:35-07:00
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Format                          : application/pdf
Title                           : WAP200E User Guide
Creator                         : Linksys
Document ID                     : uuid:fca9c458-6e42-412e-b956-043d7f0804bd
Instance ID                     : uuid:f2083de3-59ab-4e32-b789-e7970089542d
Producer                        : Adobe PDF Library 7.0
Page Count                      : 2
Author                          : Linksys

EXIF Metadata provided by EXIF.tools