LINKSYS WRT54GSV7 Wireless-G Broadband Router with 4-Port Switch User Manual WRT54GS V7 revised

Download:
Mirror Download [FCC.gov]
Document ID	746530
Application ID	NKeZYjggCiKtIFxh5yUQvQ==
Document Description	User manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.57kB (907180 bits)
Date Submitted	2007-01-11 00:00:00
Date Available	2007-01-11 00:00:00
Creation Date	2007-01-08 09:51:29
Producing Software	pdfFactory Pro 2.30 (Windows 2000 Professional Chinese)
Document Lastmod	2007-01-08 09:54:03
Document Title	WRT54GS V7 User manual revised .PDF
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	carol

ltllllemlilt lt: Troubleshooting
Tliis appendix uuiioibls or two parts. “Qiliiiiiuii Prvlileiiis and Solutions" and “Frequently Asked Questions."
PFDVIdEd file DDSItJtE SOtUtIDI’IS to orohlems that mav 003W durinothe installation and DBEtathI] Oi the Router
Read the descriptions below to help you solve your problems, If you can’t find an answer here check the tinksys
website at www.linksys.com.
Common Problems and Solutions
1. I'm trying to access the Homer‘s Web-based Utility; burl do notsee the loyln screen. Instead, I see a
screen sayinu “404 Forbidden.”
if you are using Windows Explorer, perform the following steps until you me the Web based Utility’s login
screen (Netscape Navigator will require eirriilar steps):
t. Click File. Make sure Work Offline is NOT chedked.
2. Press- CTRL + F5. This is a hard refresh, which will torce Windows Explorerto load new webpages,
not cached ones.
3. Click Tools. Click Internet Options. Click the Securitytao. Chat the Default level mutton. Make sure
the semrity level is Medium or lower Then Blink the DK hlitton,
2. Mesa W SEffl static IP address 0" a P0.
Von can assign a static IP address to a PC by performing the following steps-
~ For Windows DSSE and Me:
i. click start, Settlngs, and EDIIIrflI Panel. DUuDIE-CIIDK Network.
2. In The tollowino network components are installed box, select the TGP/IP-> associated with your
Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCPIIP line
with no asweialiuii to an Ethernet adapter, Highlight it and elielt Ilie Pmperlies trutturr.
3. In the lCP/iP properties winttow. select the IP address tab. and select Soeoitv an IP address. Enter
a unique IP address that is not used by any other computeron the netumrk connected to the Router.
Make sule that each IP address is unique for each PC or network device.
4. Click the Gateway tab, and in the New Gateway prompt, enter 192.158.1J, which istne uetault IP
address of the Rniiter Clinkthe Add hiittrtn to accept the entry
Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the I lost and Domain
names (e,g., Jonn tor Host and home for Domain]. Entertne DNS entry provided pyyour ISP, Ityour lSP
has not provided the DNS IP address, contact your ISP to get that information or no to its website for
the information,
6. Click the OK button in the TCPIIP properties window, and click Close or the 0K tJLIttUil lor the Network
window.
7. Hanan the computorwhen asked.
an
43
For Windows 2000:
Click start. Seltlngs, and EDIIIrflI Panel. DUuDIE-EIIDK Network and DIaI-llp GDIIHEBIIDIIS.
2. Hidht—clickthe Local Area Connection that is associated with the Ethernet adapter you are usinu. and
select the Proportics option.
3. n. ma components nlreokeu are used try this eulnleetiull lrux, Inglrliglil Internet Pruluwl (Tornr),
amt ollckthe Properties button. Select Ilse the following IP address untmn.
4 Enter a unique IP address that is not used by any other computernn the network connected to the
Router.
5. Enter the Suhnet Mask, 255.255.2553.
6. Enter the Detault Gateway, 192.163.” (Hunter‘s detatllt IP address).
7. Toward the bottom ol the window, aclcel Use the lollawinu DIIS server mite-sea, and enter the
Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on Its
website to find the information.
3. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in tho
Luoal Area Gunrleutiun Properties window.
9. Restart the computer if asked.
For Windows XP:
The following instructions assume you ate running thndows XPwith the default intei‘taee. if you a|e using
the uassrc |nlertace (where the |mns and menus look Irke prewous Windows vers|ons), please toIIow the
instructions lor Windows 2000
t.
Z.
4.
Click Start and Control Panel.
Click the Network and Internet GDI'II'IECIIOIIS icon and "left the NGIWOI‘K connections ICON.
Right-click the local Area Connection that is associated with the Fthernet adapter you are using,
and select the Properties option.
In the This GDHIIEDIIDII USES the following Items DDX, nlgnngm Imam?! ProtocoI (TSP/IF). Click the
Proneflies hut‘lon.
Enter a unique IP address that is not used by any other computer on the network connected to the
Huutel.
Enter the Suhnet Mask. 255.255.2554].
Enter the Detault Gateway, t%.168.1.t (Renter‘s detault IP address).
Towald the bottom at the Window, select Use the lullvwing DIIS server adfiesses, and entel the
Preterred lJl‘lS sewer and Alternatlve UNS SEI'VEI (DIDVIGEU by your ISPJ. Contact your ISP (ll 90 on IIS
website tn tinrt the intnrmatinn
Click the OK button in the Internet Protocol (TCI‘IIP) Properties window. (lick the OK button inthe
Local Area Gnnnectlon Propertles WanDW.
3. I want to its! my Internet mneofifln.
A Check your TCP/IP settings.
ForWindows BSSE, Me. 2000, and XP:
Make sure Obtain IP address automatically is selected in the settings.
44
b.
B Open a command prompL
For WItICIUWS SBSE and Me:
~ Click Start and Run. In the One" tield. true command. Press the Enter key or clickthe OK button.
For Windows 2000 and XP:
' Cliokstartalid Hull. lit the Open field, type In It. Press the filler key or click the 0K Liultuii. lit the
command prompt. true Dino 192.158.1.1anl1 oressthe Enter key.
o It you get a reply, the computer is communimting with the Router
~ ll you do NOT get a reply. please check the cable, and make sure Obtain an IP address automatically is
selected in the TCPlIP settings tor your Ethernet adapter.
[2 In the command prompt, type ping tnllnwert hy your Internet anAlt IP address and press the Enter key.
The Internet or WAN Il‘ Address can be lound on the Status screen of the ltoutcr's wcbfboacd utility. For
example, It your Intemet or WAN IP address Is 1.2.3.4, you would enter ping 1.2.3.1 and press the Enter key.
~ II you not a reply. the computer is connected to the Houter.
~ It you do nor get o reply, try the ping command trom o dittorent computer to why that your original
wrriputer is riuI the cause oi the problem.
D In the command prompt. type ninit www.vahoo.oom and Dress the Enter key.
- ll you get a reply. the computer is connected to the Internet. If you cannot open a webpage. try the ping
command from a “talent computer to verity that youi‘oi‘rginal computer is not the cause ottlre problem.
~ It you do Not get a reply, there may he a problem With the connection. try the ping command trom a
(litterent computer or uerilythat your original oompntor is nnt the cause of the problem
lam "0! getting an IP address WI 1"! ”NET"?! with my luremet Cfllflllflflflfl.
o Reler to “Prnhlem Q7, I want to test my Internet connection” to verify that you have. connectivity
~ ll you need to register the MAC addrcoo ofyour Ethernet odaptorwith your ISP, plcasc coo “Appendix E:
Flnolng the MAC adores and IP address for Your Ethernet Adapter." If you need to clone the MAG address
of your Ethernet adapter onto the Router. see the strstem section at “Chapter 5: Confiourino the
Wireless-G Broadband Router" for details.
- Make sure you ale using the right Internet ounneuiiun settings. ountoot your ISP to see ir your Internet
connection tvne is DHCI’, Static IP Address, or PPPoE (commonly used by DSL consumers). Please reter to
the Setup section of “Chapter 5: Dontiguringthe Vlhreless—G Broadband Router" tor details on Internet
connection settings.
‘ Make sure YOU have the light cable. check to see It the Internet column has a SOlIfllV llt LINK/ADI Ll:l).
0 Make SIII’F! the cahle nnnneding from yniircahle nrnSI modem is connected tn the Rniiter’s Internetnnrt
Verify thot the motus page or the llouter’s welt—based utility shows nvalid It‘ oaareos from your ISP.
‘ ‘Ium fill the computer, Router, and cable/DSL modem. Wait 30 Seconds, and then turn Oll m8 Router,
cable/DSL modern. and computer. Check the Status tab at the Houter’s web-based utility to see it you net
on IP address.
5. I am notable in access the Setup page of the Renter’s well—based utility.
~ He1er to “Problem $12, I want to test my In1emetvonnectlon"lo verily that your computer Is properly
connected to the Router.
~ Peter to ”Appendix E: Finding the MAC Address and IP addresstor Your Ethernet Adapter“ to verity that
ylllil eurnputer line an IP Autheee, Sultttet Meek, Gateway, and ons.
‘ Set fl 5131": |P address On VOW system; reler to “Problem #1 I | need to set flStatIG |P address.”
0 Peter to ”Problem Sm]- I need to remove the proxy settings or the dial-up pop-up window (tor PPPoE
users) .'
7. I need in setup a server behind my Hauler and make il‘ available to the public.
To use e server like uwcb, ftp, or rneii server, you hood to know the respective pert numbers they are ueing.
For example, port an (HTTP) Is used tor wet); port 21 (FTP) Is used tor FTP, and pm 25 (SMTP outgoing) and
Port 110 (POPS incomind) are used lorthe mail server. You can Get more information by viewino the
documentation provided with the eerver you inelallsd.
Followthese steps to set up unit tonuaidinq throuoh the Router’s web-based utilitv. We will he settind up
web, ftp, and mail servers.
1. Access the Router’s web-based utility by going to http;//192.168.1.1 orthe IP addiess ol the Router.
[in to the Applications & Gaming => Po|1 t-orwardingtah.
2 Enter any mm ynli wanttn use forthe nirsinmizeri Application.
3. Enterthe External Port range ofthe service you are using. For example, it you have a web server, you
would enter the range on to ou.
4 Cheek the protocol ynti will be. using, TCP anti/or llilP
5. Enter the IP addreos at tho PC or network device that you wantthc port server to go to. For example,
It IiIE Well server's Ethernet adapter IP address I5 I92. I68.I JD], you WDUIU enter IDU Ill tile HEIDI
provided. Check “Appendix E: Findino the MAC Address and IP Address for Vour Ethernet Adapter“ for
details on getting an IP address.
0. sheet the Enahie uptiuii lot the pull eervieee you want in use. outside. the endiilple treluw,
Application Start and End Protocol lP Address Enabled
Web server til] to 80 Both 192.188.1100 X
FTP server 21 to 21 TCP 192.168.1101 X
SMTP (outgoing) 25 to 25 Both t02.168.1.10E X
POPS (incoming) 110 to 110 Both 192.105.1102 X
Wlieii yuu have Uuiripleled the ouiiliyuratiuti, elicit the Save Settings butturi.
H. I need to set up nnline fame hosting nr use other Internet qrplieatinns.
it you wamto play onllne games or use Internet applications, most will wolkwitnout doing any port
lonlilardino or DMZ hostino. There may he wees when you wanttn host an online name or Internet
application. This would require you to set up the Flouter to deliver incoming packets or data to a specilil:
Luillpulei. This also applies to me lnternel applimliulls yuu die using. The liestway in gel lire inlurrnatiun un
what Wit SelVlCES to USE IS to “D to the website Dl the onllne dame Ol finalisation YOU want to USE. FDllUW
these steps to setup online game hosting or use a oeltain Internet application-
1. Access the Homer’s web intelfoce by going to htth/192.100.1.1 orthe lP address olthe Router. Go to
the Applications 8 Gaming :> Port Forwarding lab.
Fntet any name ynll wantln use forthe Customized Application.
Enter the External Port range ofthc acrviec you are using. For example. it you want to host Unreal
Tournament (UT), you would enterlhe range 7777 to 27500.
4. Chedt the protocol you will be usino. TCP and/or UDP.
5. Enter the IP addreer oi the pc or network device that yen wantthel port eerver to go to. For example,
ii the well selvel's Ellleillel ntluplel IP addlessis192.168.1.100,yuu wuulu elllel 100 ill llle lield
Drovided. Check “Appendix E: Finding the MAC Address and IP Address tot Vour Ethernet Adapter“ for
details on getting an IP address.
6. Check the Ellallle option torthe polt selvioes you want to use. Consider the example below.
P.“
Application Stall and Elli] Flutucul iP Address Enabled
UT 7777 to 27900 Both 192.168.1100 X
Halflife. 27015 to 27015 Both 1921531 105 x
PC Anywhere 5931 to 5631 um) 192.195.1102 x
VPN IPstc 500 to 500 UDP 192.160.1100 x
When you have completed the eullligulatiult. elicit tile Save Settings button.
9. I can’t get the Internet game, server, or application tn work
if you are having dilfieuities gelling any Internet grime. server, ornpplication to tunction properly, consider
exposing one PCto the Internet using DenIIlIitarlzeo Zone (DMZ) hosting. This option IS available when an
application requires too many ports orwhen you are not sure which polt services to use. Make sure you
disable all the lamenting cntrics if you wont to succeeeluily unc DMZ hosting, oincc lorvvnrding hue priority
overDl/IZ hosting. (In otherwords. data lnatenterstne Houterwlll be oileokedtlrst by the fonlilardlngsemngs.
if the port number that the data enters from does not have port forwardino. then the Router will send the data
to whiohaver PC or network device you set for DMZ hosting.)
47
Follow these steps to set DMZ hofling:
I. ACCESS IIIE HULIIEI'S WED-DESEU utllny Dy golng ID I'lllp://I92.I65.I.I or II‘IE IP address DI the HDUIEL
Go to the Applications 8. Gamino :> Port Forwardinotah.
2. Disable or remove the entries you have entered for forwarding. Keep this information in case you
wailt lu use it at a Iatel time.
Go to the Applications E Gaming => DMZ tab.
Select Enahle next to DMZ Inthe DMZ Host IP Address field, enter the IP address nfthe mmptiteryou
want exposed to the Internet. This will bypass the NAT teehnologyfor that computer. Please refer to
"Appendix E: Fll'ldlng the MAC Address and IP Address TDI’YDLIT Ethernet Adapter” fOI‘ details on getting
an IP address.
5. Once completed with the configuration, vlick the Save Settings button.
“P
10. I thvol my password or the password prompt always appears when lam saving sett'inps to the
flower.
Reset the Router to Iautuiy default by pressing the Basel butluii lui 10 seuuiids and their releasing it. If yuu
are still aettinu prompted fora password when saving settintis. then perform the followinu steps:
1. Access the Router’s web-based utility by going to http://102.168.1.1 orthe IP address ol the Router.
Entertlie default password admin. and oliokthe Administrations :> Management tab.
2. tnter a ditterent password in the Router Pawword held, and enter the same password in the second
field to confirm the password
3. Click the Save Settings button.
11. I am 2 PPM user, and I need to remove the pnan settings or the dial-up pop-up window.
If you have proxy settings, you need to dieahlcthcoc on your computer. Because the Router istho gateway for
the Internet connectlon, the computer does not need any proxy settlngs to galn acwss. Please follow these
directions to veritvthat you do not have anv prom settinus and that the browser you use is set to connect
directly to the LAN.
- i=tn Miuusvltliiteiiiel Enpluiei 5.0 on higher.
1. Click Start. Settings. and Control Panel. Double—click Internet Options.
2. Click the Connections tab.
3. Click the LAN settings button and remove anything that is checked.
4. Click the UK button to 90 back ID the prevrous screen.
5 Click the option Never dial a ennnentinn This will remove any dial-rip [mp-ups Inr PPPnF risers,
- I'or Netscape 4 7 or higher:
I. Stan Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.
2. Make sure you have Direct connection to the Internet selected on this screen.
3. Close all the windows to finish.
4G
12. Ta start over; i need to set the Hunter in [aviary dehll".
Hold the Reset Dut‘lun for In seconds and then release It. Tnls wIII return the password, fowvarulng, and other
set‘linuS on the Hunter to the taetarv default settings. In other words. the Router will revert to its oriqirial
taetory configuration.
13. My power LED will not ship flashing.
Press and hnldthe raet button for tine smnnds It this dues net work, yntrr firmware may be corrupted Tn
upgrade the tirmware. tollow the steps in “Appendix C. Upgrading firmware."
1d. I need tn upgrade lire firmware.
In ordcrtn upgrade the firmware with the latest tcnturca, you need to go to the Linksys website and download
the latest firmware at www.llnksys.eom.
Followthese steps:
1. Go to the Lin have Website at http:I/www.linkaye.cnm and download the Iateet firmware.
2. Tu upgrade the firmware, lulluw tlte step» in “Apperrrtih G: Upgrading Firnrw‘dre.“
15. The firmware upgrade Iailvd, and/or lira Power LED is flashing.
The upgrade could have failed fora number at reasons. Follow these steps tn upgrade the firmware amt/or
make the Power LtU stop tlasnrng:
. It the firmware upgrade failed, use the mp prngram (it was rim/unloaded alnngwith the rimiwam], llpen
the pdfthflt was downloaded along with the firmware and TI'TP program, and follow the pdt‘s
IhStI’lICtIOhS.
0 Set a static IP address an the PC; retertn “Prnhlem £11 , I need tn set a static IP address " tlse the fnllnwina
IP addmm scttingfi tor the computcryou are using:
IP ACIEIIESS: I52. I68. I.5fl
Suhnet Mask: 255.255.2550
Gateway:192.163.1.1
- FHItlIlIII the upgrade using the TFTP plugldlll “I the Athninishntiun tnti ur the Hunter s Wetktmhed utility.
16. My [ISL service’s FPPoE is always disconnecting.
PPPuE is not actually adedicflted or always-en Wnnectiun. The DSL tSP can disconnect the service atter a
period 01 thaGtIVItV, lust “KS 8 normal DhOhE dial-up COthCtIDh to the Internet.
~ There is a setup nnlinn in “keep alive" the cnnnentinn This may nnt always wnrk, sn will my need to re-
establish connection periodically.
t. TD COHHEDIIO the Router, 90 It) the Web browser, and enter nttp://192.168.1 .1 DI' the tP flflUI'ESS Ufthe
Router.
Enter the pnmword, if asked. (The dctctult password is admin.)
On the Setup screen, select the upliurr Keep Alive, and set llre Redial Period upliun at 20 (seconds).
Click the Save Settings button.
Click the Status tab, and click the Connect button.
P‘PP‘P
49
6. Vou may see the login status display w Connecting. Press the F5 key to refresh the screen, until you
see the Iogln status dlsplay as Connected.
~ Clickttie Save Set'tinus button to continue.
. Ii the connection is lost again, tollow steps 1- 6 to re-establish connection.
17. I can’t 300955 my e-mail. Web nrlam nelt‘irrfl corrupted data from ”19 Internet.
The Maximum Transmission tInit (MTU) setting may need to be adjusted By detault the MTU is set at 1500
For most DSL users, it is strongly recommended to use MTU 1492.
‘ It YOU are having some difficulties, pertorm the tollowtng steps.
1. To cannenttn the Router, an to the web browser, and enter http:ll19?168.1.1 nrttre IP address nttha
Router.
2. Enter the password, If asked. (The detault password Is admin.)
3. Looktor the MTU option. and select Manual. In the Size IieId. enter 1492.
4. Click the Save Settings button to continue.
- II yuur dillioulties uuritiiiue, uliange the Size tu dillereut values. Try this list ul values, one value at a time,
in this order. until your Broblem is solved:
14 82
1400
1352
1100
to. When I enter a URL or IP address, lye: a rime-our error or am prompted to retry.
0 Check if other PC: work It they do, ensure that your workstations IP settinusare current (IP Address,
Suhmt Mask, Dctault Gateway, and DNS). Rootartthc computer that is having aprohlom.
~ It the PCs are oomlgureo correctly, outstlll not working, cnecktne Router. Ensure that It Is connected and
oowered on. Connect to it and check its settinos. til you cannotconnect to it. checkthe LAN and Dower
oonnections.)
- It the Router is writiguied uutieotly, ullebk yuul Internet Lullllehtitlll (Di/Lama nmuent, etu.) tu see it it is
workind correctly. Vou can remove the Routerto verilv a direct connection.
0 Manually configure the TCPIIP settings with a DNS address provided by your ISP.
~ Make suie that youi hiowsei is set to contrast at eotly and that any dial-up is disabled. For Inlet net
tXDIUtEt. CIICK TOMS. Interret notions, and then the connection tab. Make sure that Internet tXDIOIEI IS
setto Hover dial a connection Fnr Netscape Navigator, click Edit, Preferences, Advanced, and Prmty
Make sure that Netscape Navigator is set to Direct connection in the Internet.
19. I cannot connect to ”19 Internet.
~ For Cable user.) Click on the Status lab and make sure you have the Internet IP address is not 0. 0.0. If
it is, ul'vs'k the DHCP Renew button, and waita lew minutes [or the router to try and oonmut your service
provider. Al'lerthe router successfully obtains an IP address, restart your computer
~ For DSL users 1) Make sure you have lyped in your user name and paewvord correclly Some service
provluers use your Tull e-mall auuress as me user name. II you are sure you nave emerlne rlgnl user
name. lry usinu username@[isu com]. Where isocom is lhe name ol your service nrovider. 2) Power down
your DSL Modem, your PC, and yourrouler. Then power on your DSLModem,wailforll1e LEDs on the DSL
“mum” in olup lldalling. Puwer u|| yuul luuler am] wail lur the power LED m alup "mung. Finally, puwel
on VflLIl PC.
20. My wireless-tr weed seems to be slow.
‘ Reposmon the antenna.
~ Renmilinn lhe muler sn lhal il's higher up, ahnue ynnrnlher nelwnrkinn gear
~ Chung!) CTS Pralcclion lo Disable undcr ndvunovd wireless sailings.
21. I do not see a sneer! impm vement while suriiluz wirelessly with my $026 Wooster equiumenr.
~ Vour Iniometeonnsclion in ueually much clowerthan your wireless network with SpoedBoouler
equiunienl. Tllia euuipnrenl will nul alleul lire speed ul yuur Ilrlernel uunnwliun.
~ Vou will see the most improvements in iransferrinu or sireaminu fileslrom one computer to anotherin
your network.
~ Your network speed will slowdown if you have mixed 802.119 and SpeedBoosierolients. For maximum
periormance, use all SpeedBooster uevrces on your network.
22. How do I turn on Spree-dams!" on my rwler?
SpeenBooster IS automaucally lumen On In Mlxefl anu u-Unly M006. There's llOIl'llflg you need ID 0010 ullllZe
lhis lealure
51
Frequently Asked Questions
Alter using Seculefasysetup, my existing wireless devices can no longer connect to the hauler.
SecureEasySetup uses WPA-Personal encryption. If your cunent Wireless devices do not support WPA-Personal
ewurily, then you cannot use ScourchoySctup on your network. Von will need to manually onnfigure your
networkseourity usingtne encryption supported by your exis1lng deuioes.
rhw do 1 u: up additional damn using SuuraEasySntup7
Repeat the Secu|eEasySetup process fm each device until all of your devices have been cuntigumd.
urn." is my SmumEagySet‘rrp button?
On the Router, the SecureEasySetup button is located on the front panel. The button should be lighted either
orange or WhItE. Hll other Securetasysetup fleVIOeS, reterto each wneless UEVIOE'S documentatlon tit locate the
h| lllnn nn lhal device
I nave [137,035 rnar Slim” WPA-FEI'SDIIEI security, Dill [m ”D? nave secureEasyserup. Dan I 51,” use
SecureEast/Selun?
Ves. Print out the wireless security settings at the end of the SecureEasySetup process, and then manually
uunligure the settings Ior your nunseoureEasySelup devices. Heler to each wireless devlce's documentation [or
instructions on how to enter these settinqs.
What is the maximum uurrrber of IP addresses that the Hunter will summrt?
Ine Hauler wdl support up to 253 II’ addresses.
Is lI’See Pau-"rmuglr supported by the Hunter?
Vfi, It IS a Dullt-Ill feature that the Router automaucally enables.
Ill/Iran: is (In; Barrier inslallod an the network?
In a typlcal environment, the Router Is Installed between the cable/DSL modem and the LAN. Plug the Router Into
the cable/DSL modem’s Ethernet port.
Does the Router support IFX ur AppleTaIk .'
No. TCP/IP isthe onlv protocol standard tor the Internet and has become the global standard tor communit‘ations.
nix, a NelWara communicalions protocol used only to route messages lrom one nodelo another, and AppIeTaIk, a
communicatlons protocol used on Apple and Macintosh networks, can be used lor LAN to LAN connections, but
[nose DI’DIOCUlS cannot connect trom the Internet to a LAN.
52
Does the Internet connection 17! the Router support 100Mbps Ethernet?
rue Routers current hardware deslgn supports up to IDuMops Ethernet on Its Internet pun; however, tne Internet
connection Speed will vary deoendint] on the Speed of your broadband connection. The Router also Supports
tfloillhps overthe auto-sensing Fast Ethernet 10/100 switch on the LAN side at the Hunter.
What is Network Address 7ranslatinn and what is it used for?
Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one pu hlit: address that
is sent out to the Internet. This adds d level at security since the address at a PC connected to the private LAN is
never transmitted on the Internet. Furthermore, NAT allows the Romer [0 be ”5&1 Wlttt tOW COSt Internet accounts,
such as list nr t‘ahle, modems, when only me TCP/IP address is provided by the, ISP. The. user may have. many
private addresses behind this single nddrcan provided by the ten
litres the Router support any operation system other than Windows 9355. Windows Millennium,
Windows 21100, or Wr'mtawe xp?
tea, but Ltilkbyb dues uul, at this little, ptuvide technical aupputl lut setup, uuuligutaliuu ut ltuublesltvutiug ul
any non-Windows operation systems.
Does the Router support 1011 send rile!
Yes, wtth the tollowtng ttx: click IUu menu —> preterence —> connecttons taD—>, and check lam hehtnd a ttrewaII
orproxy Then set the lirewall time—out In 80 seconds in the firewall sefling The Inbruet user can then send a tile
to a user behind the Hunter.
[set up an llnmal Tournament Server, hut nihers on the [All eannnt ioin. Whatdo i need to do?
It you have a dedicated Unreal Tournament server running, you need to create a motif; IP lot each at the LAN
computers and forward puns 7777, 7778, 7779, 7780, 778 I, and 2790010018 IP address UT tile server. You can
also use a oortforwardino ranoe 017777 ~ 27900. It you want to use the UT ServerAdmin. lorward another port.
(Port 8080 usually works well but is used tor remote admin. You may have to disable this.) Then in the
[UWettWeltSetvet] mtivn oi the semeniui lite, set the Listequrt tu soot) (It: IIiatLtI the mapped putt atAIVE) dun]
ServerName to the IP assigned to the Router from your ISP.
can nttlltiple gamers an the Mill yet on me game server antipley simultaneously with just nne pantie tr
address?
It depends on which netwnrk game nr what kind of game serverynu are using Fnr example, llnreai Tnurnament
supports multirlogin with one public tn
How do I get Half-Life: Team Fortress to work with the Router?
The dotault client port for Half Life is 27006. The oumputcm on your LAN need to have “ i clicntport 2700x“
added to the HL shortcut command line; the x would he 6, 7, 8, and on up. This lets multiple computers connect
to the same server One problem: Version 1 .0.1 .6 won’t let multiple computers With the some CD key connect at
53
the same time, even if on the same LAN (not a problem with 1 .IJ.1.3). As taras hosting games,the HL serverdoes
not neat] to be In the DMZ. Just Tonivaru pon 270 I5 to the local IP auuress oTtne server computer.
How can I black cormptld FI'P downloads?
ll you ale experierruirrg ourruplou files when you liowllluall a tile llvilll yuol FTP lolielll, lly using another FTP
quram.
The well page hangs, downloads are corrupt, or nothing buriunk characters are being displayed on the
SCMEII. Whaldfl I need to 110?
Form ynllr Flhernet adapter in 1thps or hall duplex mode, and tllrn nf‘tthe “Alltnrnegntiale’ Ieatllre nf ynllr
Ethernet adaptor no a lomporory mooouro. (Please look ntthc Network Oontrol Panel in your Ethernet nduptor‘o
Advanced Pmpenles tab.) Make sure that your proxy settlng Is dlsahleo In the browser. Check our website at
www.|inl
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2007:01:08 09:54:03-08:00
Create Date                     : 2007:01:08 09:51:29-08:00
Metadata Date                   : 2007:01:08 09:54:03-08:00
Creator Tool                    : pdfFactory Pro www.pdffactory.com
Format                          : application/pdf
Title                           : WRT54GS V7 User manual revised .PDF
Creator                         : carol
Document ID                     : uuid:843747ab-4430-4a1a-81cd-4fd4816c5023
Instance ID                     : uuid:6437f856-8d5a-49eb-8f23-d001c15d2025
Producer                        : pdfFactory Pro 2.30 (Windows 2000 Professional Chinese)
Has XFA                         : No
Page Count                      : 20
Author                          : carol

EXIF Metadata provided by EXIF.tools