LINKSYS WVC54GCA Wireless-G Internet Home Monitoring Camera User Manual Users manual 2

Download:
Mirror Download [FCC.gov]
Document ID	848468
Application ID	6CylJ8hrCuz4v8HElyKTeA==
Document Description	Users manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.88kB (561000 bits)
Date Submitted	2007-09-27 00:00:00
Date Available	2007-09-27 00:00:00
Creation Date	2007-09-27 13:30:25
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-09-27 13:30:25
Document Title	Users manual 2
Document Creator	PScript5.dll Version 5.2
Document Author:	ltsai

Advanced Configuration with the Web-based Utility
Chapter 4
Setup > Basic
•
The Setup > Basicc screen allows you to alter the Camera’s
Device settings, Network settings, Wireless settings, and
Security settings.
Check here if you want to update the time
automatically through the NTP server from the
Internet Select this option and fill in the NTP Server
Address field if you want the Camera to update its time
at regular intervals by contacting an NTP (Network
Time Protocol) server on the Internet.
Network Settings
•
Configuration Type If you want to automatically
assign the Camera an IP address from a DHCP server,
then select Obtain Address Automatically (DHCP). If
you want to assign the Camera a static IP address, then
select Fixed IP Address, and complete the IP Address,
Subnet Mask,
k Gateway,
y Primary DNS and Secondary
DNS fields.
•
IP Address, Subnet Mask, Gateway, Primary DNS,
Secondary DNS Complete these fields if you want
to assign the Camera a static IP address. You need to
enter at least one DNS address.
Setup > Basicc Screen
Device Settings
•
•
Device ID This is the Camera name that is used by the
Camera and the Utility to exchange data.
Camera Name You may assign the Camera any name
up to 15 characters long. Unique, memorable names
are helpful, especially if you use multiple Cameras on
the same wireless network.
Wireless Settings
•
SSID Enter the network’s SSID or network name here.
•
Network Type Select the network’s mode, Ad-hoc or
Infrastructure.
•
Channel No If the Camera is set to Ad-hoc mode,
select its channel setting from the drop-down menu.
Security Click Edit Security Settings to display the
Wireless Securityy screen.
•
Description Enter information about the Camera in
this field. You can enter up to 32 characters.
•
•
Enable LCD and LED Operations This feature allows
you to enable or disable the Camera’s LCD and LEDs.
Security Mode
•
Current Date/Time This is the Camera’s current date
and time. To change it, click Change, and the Set Date/
Time screen appears. To use the computer’s date and
time, click Sync with PC; otherwise, update the date
and time and click Set New Time. Then, click Close.
Select the appropriate option based on your wireless
network configuration.
Disabled
This option implements no security on your wireless
network. Data is not encrypted before transmission.
WEP
WEP is a basic encryption method, which is not as secure
as later methods such as WPA-Personal or WPA2 Personal.
However, it is supported by all clients.
Set Date/Time Screen
•
Time Zone Select the time zone for the Camera’s
location.
•
Adjust for Daylight Saving Time Select this to adjust
the Camera’s current time for Daylight Saving Time.
NOTE: You must unselect this option when
Daylight Saving Time finishes.
Wireless Security > Security Mode > WEP
•
Wireless-G Internet Home Monitoring Camera
TX Key Select the number of the key used on the
21
Advanced Configuration with the Web-based Utility
Chapter 4
wireless network.
•
WEP Encryption Select the appropriate option for
key length based on your network settings.
•
Passphrase Type in the passphrase used to generate
WEP keys on your network and click Generate.
•
Key 1 - Key 4 Key values can be entered manually or
generated from a passphrase.
•
Authentication Select the appropriate authentication
type used on the wireless network.
•
Resolution Select the resolution you want for viewing
or recording the Camera’s video. Select 640*480 for the
highest resolution, 320*240 for medium resolution,
and select 160*128 for the lowest resolution.
•
Video Quality Control Select either Fixed Bit Rate or
Fixed Quality for the video stream.
• Fixed Bit Rate Select the bit rate you want for
viewing or recording the Camera’s video. The range
varies from 64 Kbps to 1.2 Mbps.
• Fixed Quality Select the level of quality you want
for viewing or recording the Camera’s video. The
range varies from Very Low to Very High.
WPA Personal
This method offers TKIP encryption with dynamic
encryption keys.
It may be helpful to know what the bit rates are for
video viewing or recording at different resolutions and
image quality levels. The following table lists these
estimated bit rates.
Estimated Bit Rates for Video Viewing or Recording
Wireless Security > Security Mode > WPA Personal
•
•
WPA Algorithm This cannot be modified.
WPA Shared Key Enter the shared key used for
accessing the wireless network.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
Setup > Image
The Setup > Image screen allows you to alter the Camera’s
video settings.
Resolution
Quality Level
Bit Rate in kbps
640 x 480
Very High
4000
640 x 480
High
3200
640 x 480
Normal
1200
640 x 480
Low
480
640 x 480
Very Low
160
320 x 240
Very High
1000
320 x 240
High
800
320 x 240
Normal
300
320 x 240
Low
120
320 x 240
Very Low
40
160 x 128
Very High
800
160 x 128
High
400
160 x 128
Normal
200
160 x 128
Low
100
160 x 128
Very Low
40
NOTE: Video quality and/or performance may
be affected by the number of users connected
to the Camera.
Setup > Image Screen
•
Max Frame Rate Select the maximum frame rate
for the camera. Reducing this lowers the amount of
bandwidth required by the camera.
•
Power Line Frequency Select the power line frequency
(50Hz or 60Hz) used in your region, to improve the
picture quality under fluorescent lighting.
Video Settings
•
Image Type Select the desired type:
•
MPEG-4 gives smooth motion and high quality
images, but the video image quality will
deteriorate if sufficient bandwidth is not available.
•
MJPEG requires more bandwidth than MPEG-4,
but if the bandwidth is insufficient, the frame rate
will drop while image quality remains at the same
level.
Wireless-G Internet Home Monitoring Camera
Adjustments
•
Color Balance Select the desired option to match the
current environment and lighting.
22
Advanced Configuration with the Web-based Utility
Chapter 4
•
•
Exposure If necessary, you can adjust the exposure
to obtain a better image. For example, if the camera
is facing minimal light, the image may be too dark. In
this case, you can increase the exposure.
Sharpness Select the desired option for the sharpness.
You can select a Sharpness value between -3 and 3.
Restart
•
Firmware Upgrade
•
Options
•
Flip Image/Mirror Image The Flip option rotates
the image 180° vertically; the Mirror option rotates
the image 180° horizontally. If the camera is mounted
upside-down on the ceiling, select both Flip and
Mirror to rotate the image to the correct position.
•
Enable Microphone Select this to enable audio. Using
Audio increases the bandwidth requirements slightly.
•
Enable Time Stamp Select this to display a time
stamp on the video.
•
Enable Text Display To display text on the video,
select this, then enter up to 20 characters in the field.
Restart To restart the Camera, click Restart.
Upgrade Firmware New firmware versions are posted
at www.linksys.com and can be downloaded for free.
If the Camera is functioning satisfactorily, there is no
need to download a newer firmware version, unless
that version has a new feature that you want to use.
Loading new firmware onto the Camera does not
always enhance its performance.
Linksys recommends that you upgrade the Camera’s
firmware within your network; in other words, use a
computer within the Camera’s local network. If you
attempt to upgrade the Camera’s firmware from a
remote location—using a computer outside of the
Camera’s local network—the upgrade will fail.
To upgrade the firmware:
1. Go to the Linksys website, www.linksys.com,
and download the firmware upgrade file for the
Camera. Then extract the file.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
2. From the Setup > Maintenance screen, click
Upgrade Firmware.
Setup > Maintenance
3. You will see the Upgrade Firmware screen. Click
Browse to find the extracted file, and then doubleclick it.
The Setup > Maintenance screen allows you to reset the
Camera’s factory defaults and upgrade the firmware.
4. Click Start Upgrade, and follow the on-screen
instructions. To cancel the upgrade, click Cancel.
For further help, click Help.
Configuration
•
Save Configuration Select this to save the Camera’s
current configuration to your computer, so that you
can recover these settings at a later time.
•
Upload Configuration Select this to upload the
Camera’s configuration from a file on your computer.
Enter the file’s location and name in the field, or click
Browse to locate the file on your computer.
Setup > Maintenance Screen
Restore Factory Defaults
•
Restore Defaults To restore the Camera to its factory
default settings, click Restore Defaults.
Setup > Users
The Setup > Users screen lets you set the user name and
password for the Camera’s administrator and users, as well
as designate access rights for the users.
NOTE: This will overwrite the Camera’s settings
with the factory defaults. Any changes you made
to the Camera’s settings will be lost; you will not
be able to recover them unless you saved them
as described in “Configuration” below.
Wireless-G Internet Home Monitoring Camera
23
Advanced Configuration with the Web-based Utility
Chapter 4
Setup > Users Screen
Setup > DDNS Screen
Administrator
•
Enable DDNS Select this option to enable a DDNS
service with the Camera.
Use this to set the user name and password of the Camera
administrator.
•
Service Provider Select your DDNS service provider
from this drop-down menu. Your selection will
determine the options that are displayed in the rest of
the screen.
•
Admin Enter the administrator’s name in the first
field, then enter the password in the second and third
fields. Then, click Change to set the information.
User List
SoloLink DDNS
•
Username Enter the username you have set up on
your SoloLink account. If you are a new user, click
New User? - Click here to Register. The New User
Registration screen will appear. Click Continue to
continue, or click Back
k to return to the previous
screen. Your web browser will automatically start up,
and you will visit a website to set up your SoloLink
account. Follow the on-screen instructions. For more
information, refer to “Chapter 6: Setting up the Linksys
SoloLink DDNS Service,” which will guide you through
setup of your SoloLink account.
•
Password Enter the password you have set up on
your SoloLink account. If you have forgotten your
password, click Forgot your Password?
Use this to set each user’s name and password and to
assign each user’s access rights.
•
User Name Enter the user’s name.
•
Password, Confirm Password Enter the password in
both fields.
•
Pan/Tilt Select this option to grant the user access to
the Pan/Tilt options.
•
Setup Select this option to allow the user to
configure the camera without having to grant the user
administrator rights.
Click Add to set the user’s information.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
The Password Requestt screen will appear. Complete the
Domain name field. Click Continue and your username
and password will be e-mailed to the e-mail address
registered with your SoloLink DDNS account. Click
Cancel to cancel your change. Click Back
k to return to
the previous screen.
Setup > DDNS
The Setup > DDNS screen allows you to set up and
configure your DDNS Service. DDNS (Dynamic Domain
Name System) lets you assign a fixed host and domain
name to a dynamic Internet IP address. If you have already
set up your SoloLink account, then you can use this screen
to register additional Cameras.
Wireless-G Internet Home Monitoring Camera
•
Your Domain Enter the host and domain name you
have set up on your SoloLink account. It should be
in this format: .ourlinksys.com. For
example, if myhouse is the Location ID, then the host
and domain name would be myhouse.ourlinksys.com.
•
Device Name Enter the name you gave the Camera.
•
WAN Port Enter the number of the port you will use
to remotely access the Camera. If you need to find an
available port, click Find Available Port and follow
the on-screen instructions.
24
Chapter 4
Advanced Configuration with the Web-based Utility
NOTE: If you use the Camera’s DDNS feature,
then you must also configure the port
forwarding feature on your network router. Go
to www.linksys.com/portfwd for instructions
on how to configure a Linksys router. For other
routers, refer to your router’s documentation.
•
Setup > FTP Upload
The Setup > FTP Upload
d screen allows you to manage
images uploaded to an FTP server.
DDNS Service Update Depending on how often
you want the DDNS service to update the dynamic IP
address, select the appropriate time interval from the
drop-down menu. To update the dynamic IP address
immediately, click Update Now.
Status
•
Registration Status This displays your SoloLink
registration status.
•
Address Update Status This indicates the status of
your address update.
Setup > FTP Upload Screen
•
Enable FTP Upload Select this option to enable the
FTP Upload feature. If enabled, you must enter the
details for the FTP Server.
•
Last Update Attempt This shows when the last
address update attempt was made.
•
Last Successful Update This shows when the last
successful address update was made.
•
Primary FTP Server Enter the name or IP address of
the Primary FTP Server.
•
Options To login to your SoloLink account, click
DDNS Account. To remove the Camera from the DDNS
service, click Remove Camera.
•
Login Name Enter the Login name required to access
the FTP server.
•
Password Enter the password for FTP server access.
•
Port Enter the Port number required to gain access to
the FTP server.
•
Enable Passive Mode Select this option to enable
the Passive Mode feature as required.
•
File Pathname Enter the desired pathname here.
•
Upload to the secondary FTP if the camera cannot
connect to the primary FTP To upload to a secondary
FTP Server when the Camera cannot connect to the
Primary FTP Server, select this option, then enter the
following details for the Secondary FTP Server.
DDNS
The following options appear if you select DynDNS or
TOZ as your DDNS Service Provider. Use these to set up
and manage your DDNS service.
•
Host Name Enter the Host Name.
•
Account Enter your DDNS account name.
•
Password Enter your password.
•
Check WAN IP Address Select how often you want
the DDNS service to check the WAN IP address, and
specify the time to start checking.
• Secondary FTP Server, Login Name, Password,
Port Enter the Secondary FTP Server’s name or IP
address, login name, password, and port number.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
• Enable Passive Mode Select this option to enable
the Passive Mode feature as required.
• File Pathname Enter the desired pathname here.
•
Photo Enter the desired number of photo shots here.
Up to four snapshots can be uploaded per interval.
•
Upload Interval Select the desired option for the
upload interval.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
Wireless-G Internet Home Monitoring Camera
25
Advanced Configuration with the Web-based Utility
Chapter 4
Setup > Options
•
The Setup > Options screen allows you to alter the Camera’s
e-mail alert features, UPnP configuration, and Alternate
Port settings.
Area/Sensitivity Click this button to enter the
motion detection sub-screen. You can set the area or
areas of the video image to be examined, and adjust
the sensitivity of detection for each area.
UPnP
•
Enable UPnP When enabled, the Camera’s Universal
Plug and Play (UPnP) feature allows a UPnP-enabled
computer to easily detect the Camera. The Camera’s
UPnP feature is disabled by default. If your computer
is UPnP-enabled, select this option.
Alternate Port
•
Setup > Options Screen
If you already have a Web Server on your LAN, then
you should enable the Alternate Port and use this port
number instead of port 80.
E-mail Alert
You can choose to be notified when the Camera detects
motion in its field of view. You will be sent a text-only
e-mail or an e-mail with video attached.
NOTE: Motion detection can be triggered by
rapid changes in lighting condition, as well as
by moving objects. For this reason, it should
only be used indoors.
•
Enable E-mail Alert Select this option to be notified
by e-mail when the Camera detects motion.
•
Send to Enter up to three e-mail addresses that will
receive e-mail alerts.
•
Show“From” as Enter the text that you want displayed
in the From field of any e-mail alert message.
•
Subject Enter the Subject for the e-mail alerts.
•
SMTP Mail Server Enter the IP address of the outgoing
mail SMTP server. If it requires authentication, select
My Mail Server Requires Authentication, and fill in
the Account Name and Password
d fields.
•
Pan/Tilt This option is only available if your camera
is fitted with a Pan/Tilt control. If available, select the
desired option to resolve conflict between the Pan/Tilt
and Motion Detection features.
•
Delay between E-mails Enter the minimum time
interval between e-mail alerts. The default is 2 minutes.
•
E-Mail Video Select Enable from the drop-down box
to have a video clip attached to each e-mail alert. Then
select the video clip length, up to a maximum of 5
seconds. The default is 2 seconds. Select Disable from
the drop-down box if you want the Camera to send
text-only e-mail alerts.
Wireless-G Internet Home Monitoring Camera
Enable Alternate Port If you want the Camera to
be able to use an alternate port for communications,
select this option. Then, enter the desired port number
in the range from 1024 to 65534 in the Port Number
field. The default port number is 1024.
RTP/RTSP
•
RTSP Port To change the RTSP Port number, enter the
desired number in the range of 1024 to 65535. The
default is 554.
•
RTP Data Port To change the RTP Data Port, enter the
desired number in the range of 1024 to 65535.
•
Max RTP Data Packet To change the maximum
length of RTP data packets, enter the desired maximum
length in the range of 400 to 1400.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
26
Advanced Configuration with the Web-based Utility
Chapter 4
Setup > Pan/Tilt
The Setup > Pan/Tiltt screen allows you to manage the
Camera’s preset positions as well as the pan and tilt.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
Setup > Status
The Setup > Status screen allows you to view the Camera’s
status information and log.
Setup > Pan Tilt Screen
Set Preset
•
Position buttons Use these buttons to adjust the
Camera’s position.
•
Calibration Click this button to reset the calibration
of the Pan/Tilt area.
•
Set Home To set the Home position, set the Camera
to the desired position and then click Set Home.
•
•
•
System Status
•
Firmware Version The version of the current firmware
installed.
•
Current Position To save the current position as a
Preset Position, enter the desired name for the position
and click Add.
MAC Address The MAC Address of the Camera is
displayed here.
•
Camera Name The name you gave to the Camera is
displayed here.
Preset Position To delete a preset position, select it
from the drop-down box and click Delete.
•
Description Information about the Camera, such as
location, is displayed here.
•
Date/Time The current date and time are shown
here.
Pan/Tilt Control
•
Setup > Status Screen
Pan/Tilt Movement Select On if you want to use the
Pan/Tilt Movement feature, otherwise select Off.
Default Home Position Click Reset to reset the
Default Home Position.
Rotation Sequence
This feature determines how the camera will move when
it is set to Rotate. You create a list of Preset Positions; the
Camera will go to the first position in the list, then to each
subsequent position, stopping at each position for the
specified length of time. The Camera will stop moving
when it reaches the last position in the list.
To create the Rotation Sequence, select the desired Preset
Position in the Presett column, select the desired time to
remain at this position from the Time drop-down box,
and click Add >>. Repeat until the desired sequence is
complete.
To delete a position from the Sequence, select the desired
position and click Delete.
Wireless-G Internet Home Monitoring Camera
Image
•
Image Type This displays the compression type of
the video stream.
•
Resolution This displays the image size of the video
stream.
•
Image Quality This displays the image quality of the
video stream.
Network
•
Network Type The wireless network’s mode is shown
here.
•
IP Address The Camera’s IP Address is displayed
here.
•
Subnet Mask The Camera’s Subnet Mask is shown
here.
•
Gateway The Camera’s Gateway address is displayed
27
Chapter 4
Advanced Configuration with the Web-based Utility
here.
•
Primary DNS, Secondary DNS The IP addresses of
the Primary DNS and Secondary DNS are displayed
here.
Wireless
•
SSID The wireless network’s SSID or name is shown
here.
•
Channel The wireless network’s channel setting is
displayed here.
•
Security The wireless network’s encryption level is
shown here.
Help
Through the Help screen, you’ll find links to additional
resources for the Camera and its Utility. If you select the
Help tab directly from the Welcome screen, then you will
see the User Help screen and will only be able to access
these resources. If you first log in to access the Camera’s
Setup and then select the Help tab, you will see the
Administrator Help screen and will be able to restore
factory defaults and upgrade the Camera’s firmware.
Syslog
•
Syslog Server Select this option to enable the Syslog
feature, then enter the address of the Syslog Server.
This feature allows the Camera to upload system log
files to a Syslog Server.
Log
•
System Log This shows the Camera’s activities. To
empty the log, click Clear Log.
To get the Camera’s most up-to-date information, click
Refresh. To get additional information about the screen’s
features, click Help.
Wireless-G Internet Home Monitoring Camera
Setup > Help Screen
•
Setup Click any of the topics in the bar on the left to
get help information.
•
Linksys Support Page - Download Latest Viewer/
Recorder Utility Click this link to download the most
recent version of the Camera Utility from the Linksys
website, www.linksys.com.
•
Click here to learn how to configure Port Forwarding
in your Linksys Router If you are going to use the
SoloLink DDNS Service, you need to set up port
forwarding on your router. For instructions on how to
configure a Linksys router, click this link. If you have a
different router, refer to your router’s documentation.
•
Adobe website (software for viewing PDF
documents) If you do not have Adobe Acrobat
Reader, click this link to download it.
28
Troubleshooting
Appendix A
Appendix A:
Troubleshooting
This appendix consists of two parts: “Common Problems
and Solutions” and “Frequently Asked Questions.” This
appendix provides solutions to problems that may occur
during the installation and operation of the Wireless-G
Internet Home Monitoring Camera. Read the description
below to solve your problems. If you can’t find an answer
here, check the Linksys website at www.linksys.com.
Common Problems and Solutions
I can’t view the Camera’s video using Internet Explorer.
Make sure the OCX plug-in was correctly installed.
If you’re not sure, re-install the plug-in by following
these instructions
•
On the Welcome screen of the Camera’s Webbased Utility, click View Video.
•
A screen mentioning a security warning about
an OCX plug-in will appear. Click Yes to allow the
plug-in to be installed.
•
You should then be able to view the Camera’s
streaming video.
If you still cannot view the video, make sure you
have the rights to install the plug-in in your PC’s
Internet Explorer. If not, log into your computer as an
administrator and install the plug-in.
Then you can check if the OCX plug-in has been
installed. Follow these instructions:
•
From Internet Explorer, go to Tools and Internet
Options.
•
On the General screen, click Settings under
Temporary Internet files.
•
Click View Objects. You should see a file named
NetCamPlayerWeb Control installed.
The OCX plug-in is installed in Internet Explorer, but I
cannot view any video.
Make sure Microsoft Internet Explorer 5.5 or higher is
installed. Then delete the OCX plug-in by following
these instructions:
•
From Internet Explorer, go to Tools and Internet
Options.
•
On the General screen, click Settings under
Temporary Internet files.
•
Click View Objects.
•
You should see a file named NetCamPlayerWeb
Control installed. Delete this file from the list.
Wireless-G Internet Home Monitoring Camera
•
The next time you click View Video from the web
browser, you will be prompted to re-install the
OCX plug-in.
When powering on the Camera, I can’t immediately
access the Camera from my computer.
Make sure the Camera’s LED is continuously lit. When it
is flashing, the Camera is initializing.
I’m not able to play my recording video files.
Make sure you have Microsoft Windows Media Player
7 or higher. If you don’t, you can download the latest
version from www.microsoft.com.
I have two Cameras and see two WVC54GCAs listed in
my Camera Utility. When I click to view both Cameras, I
see the video of only one Camera.
Make sure that the Cameras have different camera or
device names. You can change this by using the Webbased Utility or running the Setup Wizard. If you use
the Web-based Utility, log in and click the Setup tab.
Then on the Basic screen, change the Camera Name.
I want to set up an account with the SoloLink DDNS
Service, but I can’t access the SoloLink website to sign
up.
Make sure the Camera is properly configured on your
local network. Then check to see if your PC and Camera
are properly connected and your network has an active
Internet connection.
When I view video remotely via the Internet, the video is
very slow.
Video performance is greatly affected by your Internet
connection speed. You can lower the Camera’s image
quality to speed up the video. Through the Camera’s
Web-based Utility, click the Setup and Image tabs, and
then lower the image quality on the Image screen.
I cannot access the Setup tab of the Camera’s Web-based
Utility.
Make sure you have administrator rights. Only an
administrator can change the Camera’s settings.
I want to access the Camera when I’m away from home,
but somehow I can’t connect.
If your network uses a dynamic IP address supplied
by your ISP, then the IP address you use to reach the
Camera will change as well. You need to use the Linksys
SoloLink DDNS Service, so you can access the Camera
using its domain name while the service keeps track of
29
Appendix A
the IP address changes. To set up a Dynamic Domain
Name Service (DDNS) account, click the Setup tab of
the Camera’s Web-based Utility. Click the SoloLink
DDNS tab. If you are a new user, click New User? - Click
here to Register. Follow the on-screen instructions.
You can also set up the Linksys SoloLink DDNS Service
by inserting the Setup CD-ROM into your PC’s CD-ROM
drive. Click the Setup SoloLink DDNS Service button,
and follow the on-screen instructions. For more
information, see “Chapter 7: Setting up the Linksys
SoloLink DDNS Service.”
Important: To allow remote access to the Camera, you
will also have to use the port forwarding feature on
your network router.
I already set up my SoloLink DDNS account, but I can’t
access the Camera from a remote location.
Follow these instructions:
•
When you enter the Camera’s domain name, make
sure it is in this format:
http://..ourlinksys.com
The  is the name you gave the
Camera when you ran the Setup Wizard. The
 is the name you selected when you
set up your SoloLink DDNS account.
•
If the Camera is set to DHCP, make sure your local
network is working properly and your router has
an active Internet connection.
•
If the Camera uses a static IP address, insert the
Setup CD-ROM into your network PC’s CD-ROM
drive. Click the Setup button and follow the
on-screen instructions. When you see the IP
Settings screen, make sure the Camera’s Default
Gateway and Primary DNS addresses are correct.
For more information, refer to the Camera’s Quick
Installation Guide.
Frequently Asked Questions
Can I view video using a Macintosh or Netscape
Navigator?
The Camera is designed for computers running a
Windows operating system and Internet Explorer 5.5
or higher. You cannot view video on a Macintosh. If
you only have Netscape, you can view video using the
Camera Utility. See “Chapter 3: Installing and Using the
Camera Utility.”
Can I directly connect the Camera to wired and wireless
networks at the same time?
Troubleshooting
decide if you want to connect the Camera to a wireless
network via an access point or to a wired network. If
your wireless and wired networks are bridged, then
you can access the Camera from any networked
computer, but the Camera must be directly connected
to only one of the networks.
To connect the Camera to a wireless network, power
on the Camera with no network cable attached.
The Camera will be ready for use when the LED is lit
continuously.
To connect the Camera to a wired network, connect
the network cable to the Camera, and then power it
on. The Camera will be ready for use when the LED is
lit continuously.Can I install the Camera outdoors?No,
the Camera was not designed for outdoors usage.I’ve
recorded video for a few hours.
Why do I see multiple files saved on my computer?
The recording function saves video in chunks; each
chunk is a maximum of one hour in duration. For
example, if you have recorded five continuous hours,
then you will see five files saved on your computer.
This keeps files from getting too large.
Do I need to install the Linksys Multi-Camera Viewer and
Recorder Utility?
Installation is optional. You can view video using
Microsoft Internet Explorer 5.5 or higher. If you don’t
want to use the recording function, then you don’t
need to install the Multi-Camera Viewer and Recorder
Utility.
Where can I find more information about the Linksys
SoloLink DDNS Service?
You can go to www.linksys.com/sololink for more
information.
Can I specify who gets to view the Camera’s video?
Yes. Access the Camera’s Web-based Utility, and click
the Setup tab. After you log in, click the Users tab.
You will be able to restrict access to users you have
entered in the database. See “Chapter 4: Advanced
Configuration with the Web-based Utility.”
Can I add a time stamp to the video?
Yes. Access the Camera’s Web-based Utility, and
click the Setup tab. After you log in, click the Image
tab. You will be able to add a time stamp as well as
descriptive text to the video. See “Chapter 4: Advanced
Configuration with the Web-based Utility.”
No. Before powering on the Camera, you should
Wireless-G Internet Home Monitoring Camera
30
Troubleshooting
Appendix A
How many users can view the Camera’s video at the
same time?
Users at four different PCs can simultaneously view the
Camera’s video.
What is infrastructure mode?`
When a wireless network is set to infrastructure mode,
the wireless network is configured to communicate
with a wired network through a wireless access point
or router.
What is the IEEE 802.11b standard?
It is one of the IEEE standards for wireless networks. The
802.11b standard allows wireless networking hardware
from different manufacturers to communicate,
provided that the hardware complies with the 802.11b
standard. The 802.11b standard states a maximum data
transfer rate of 11Mbps and an operating frequency of
2.4GHz.
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The
802.11g standard allows wireless networking hardware
from different manufacturers to communicate,
provided that the hardware complies with the 802.11g
standard. The 802.11g standard states a maximum data
transfer rate of 54Mbps and an operating frequency of
2.4GHz.
What IEEE 802.11b features are supported?
The product supports the following IEEE 802.11b
functions:
•
CSMA/CA plus Acknowledge protocol
•
Multi-Channel Roaming
•
Automatic Rate Selection
•
RTS/CTS feature •Fragmentation
•
Power Management
What IEEE 802.11g features are supported?
The product supports the following IEEE 802.11g
functions:
•
CSMA/CA plus Acknowledge protocol
•
OFDM protocol
•
Multi-Channel Roaming
•
Automatic Rate Selection
•
RTS/CTS feature
•
Fragmentation
•
Power Management
What is ad-hoc mode?
When a wireless network is set to ad-hoc mode, the
wireless-equipped computers are configured to
communicate directly with each other. The ad-hoc
wireless network will not communicate with any wired
network.
Wireless-G Internet Home Monitoring Camera
31
Wireless Security Checklist
Appendix B
Appendix B:
Wireless Security Checklist
Wireless networks are convenient and easy to install, so
homes with high-speed Internet access are adopting them
at a rapid pace. Because wireless networking operates by
sending information over radio waves, it can be more
vulnerable to intruders than a traditional wired network.
Like signals from your cellular or cordless phones, signals
from your wireless network can also be intercepted. Since
you cannot physically prevent someone from connecting
to your wireless network, you need to take some additional
steps to keep your network secure.
1. Change the default wireless
network name or SSID
Wireless devices have a default wireless network name
or Service Set Identifier (SSID) set by the factory. This
is the name of your wireless network, and can be up
to 32 characters in length. Linksys wireless products
use linksys as the default wireless network name. You
should change the wireless network name to something
unique to distinguish your wireless network from other
wireless networks that may exist around you, but do not
use personal information (such as your Social Security
number) because this information may be available for
anyone to see when browsing for wireless networks.
2. Change the default password
For wireless products such as access points, routers, and
gateways, you will be asked for a password when you
want to change their settings. These devices have a default
password set by the factory. The Linksys default password
is admin. Hackers know these defaults and may try to
use them to access your wireless device and change your
network settings. To thwart any unauthorized changes,
customize the device’s password so it will be hard to
guess.
3. Enable MAC address filtering
4. Enable encryption
Encryption protects data transmitted over a wireless
network. Wi-Fi Protected Access (WPA/WPA2) and Wired
Equivalency Privacy (WEP) offer different levels of security
for wireless communication.
A network encrypted with WPA/WPA2 is more secure
than a network encrypted with WEP, because WPA/WPA2
uses dynamic key encryption. To protect the information
as it passes over the airwaves, you should enable the
highest level of encryption supported by your network
equipment.
WEP is an older encryption standard and may be the
only option available on some older devices that do not
support WPA.
General Network Security Guidelines
Wireless network security is useless if the underlying
network is not secure.
•
Password protect all computers on the network and
individually password protect sensitive files.
•
Change passwords on a regular basis.
•
Install anti-virus software and personal firewall
software.
•
Disable file sharing (peer-to-peer). Some applications
may open file sharing without your consent and/or
knowledge.
Additional Security Tips
•
Keep wireless routers, access points, or gateways away
from exterior walls and windows.
•
Turn wireless routers, access points, or gateways
off when they are not being used (at night, during
vacations).
•
Use strong passphrases that are at least eight characters
in length. Combine letters and numbers to avoid using
standard words that can be found in the dictionary.
WEB: For more information on wireless
security, visit www.linksys.com/security
Linksys routers and gateways give you the ability to
enable Media Access Control (MAC) address filtering. The
MAC address is a unique series of numbers and letters
assigned to every networking device. With MAC address
filtering enabled, wireless network access is provided
solely for wireless devices with specific MAC addresses.
For example, you can specify the MAC address of each
computer in your home so that only those computers can
access your wireless network.
Wireless-G Internet Home Monitoring Camera
32
Specifications
Appendix C
Appendix C:
Specifications
Model
WVC54GCA
Standards
IEEE 802.11b, IEEE 802.11g
Ports
One 10/100 AutoCrossover (MDI/MDI-X)
port, Power port
Protocols
TCP/IP, HTTP, DHCP,
NTP, SMTP, UPnP
(Discovery only)
Button
One Reset Button
Cabling Type
RJ-45
LEDs
Power
Security Features
User Authentication,
WEP/WPA-PSK,
Motion Detection
WEP Key Bits
64/128 Bit
Image Sensor
CMOS
Lens
Fixed Focus
Resolution
320 x 240, 160 x 128
Relative Illumination
5.1 Lux
Effective Focus
3 mm
Sensitivity
1.0V/Lux-sec
Field of View
61.48 degrees
CompressionAlgorithm
MPEG-4
Record File Format
ASF
Brightness
Auto/Manual Adjustment
Environmental
Dimensions
(W x H x D)
3.54" x 4.02" x 1.46"
(90 x 102 x 37mm)
Weight
0.29 lb (0.13 kg)
Power
5V DC External
Certification
FCC
Operating Temp.
32 to 104ºF (0 to 40ºC)
Storage Temp.
14 to 158ºF (–10 to 70ºC)
Operating Humidity
10 to 85% Relative
Humidity, Noncondensing
Storage Humidity
5 to 90% Noncondensing
Wireless-G Internet Home Monitoring Camera
33
Appendix D
Appendix D:
Warranty Information
Limited Warranty
Linksys warrants to You that, for a period of one year
(the "Warranty Period"), your Linksys Product will be
substantially free of defects in materials and workmanship
under normal use. Your exclusive remedy and Linksys’
entire liability under this warranty will be for Linksys at
its option to repair or replace the Product or refund Your
purchase price less any rebates. This limited warranty
extends only to the original purchaser.
If the Product proves defective during the Warranty
Period call Linksys Technical Support in order to obtain
a Return Authorization Number, if applicable. BE SURE
TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN
CALLING. If You are requested to return the Product, mark
the Return Authorization Number clearly on the outside
of the package and include a copy of your original proof
of purchase. RETURN REQUESTS CANNOT BE PROCESSED
WITHOUT PROOF OF PURCHASE. You are responsible
for shipping defective Products to Linksys. Linksys pays
for UPS Ground shipping from Linksys back to You only.
Customers located outside of the United States of America
and Canada are responsible for all shipping and handling
charges.
Warranty Information
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty or
remedy provided under this Agreement fails of its essential
purpose. Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to You.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.
ALL IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF
THE WARRANTY PERIOD. ALL OTHER EXPRESS OR
IMPLIED
CONDITIONS,
REPRESENTATIONS
AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions
do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to You. This
warranty gives You specific legal rights, and You may also
have other rights which vary by jurisdiction.
This warranty does not apply if the Product (a) has been
altered, except by Linksys, (b) has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, or (c) has been subjected
to abnormal physical or electrical stress, misuse,
negligence, or accident. In addition, due to the continual
development of new techniques for intruding upon and
attacking networks, Linksys does not warrant that the
Product will be free of vulnerability to intrusion or attack.
Wireless-G Internet Home Monitoring Camera
34
Regulatory Information
Appendix E
Appendix E:
Regulatory Information
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This product has been tested and complies with the
specifications for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment or
devices
•
Connect the equipment to an outlet other than the
receiver’s
•
Consult a dealer or an experienced radio/TV technician
for assistance
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body.
Safety Notices
•
Caution: To reduce the risk of fire, use only No.26 AWG
or larger telecommunication line cord.
•
Do not use this product near water, for example, in a
wet basement or near a swimming pool.
•
Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
WARNING: This product contains lead, known
to the State of California to cause cancer, and
birth defects or other reproductive harm. Wash
hands after handling.
Industry Canada Statement
This Class B digital apparatus complies with Canadian
ICES-003 and RSS210.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including
interference that may cause undesired operation of the
device. This device has been designed to operate with
an antenna having a maximum gain of 2dBi. Antenna
having a higher gain is strictly prohibited per regulations
of Industry Canada. The required antenna impedance
is 50 ohms.
To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen
that the EIRP is not more than required for successful
communication.
Industry Canada Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. IEEE
802.11b or 802.11g operation of this product in the USA is
firmware-limited to channels 1 through 11.
Wireless-G Internet Home Monitoring Camera
35
Appendix E
Avis d’Industrie Canada
Cet appareil numérique de la classe B est conforme aux
normes NMB-003 et RSS210 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux
conditions suivantes :
1. il ne doit pas produire de brouillage et
2. il doit accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre
le fonctionnement du dispositif. Le dispositif a été
conçu pour fonctionner avec une antenne ayant un gain
maximum de 2 dBi. Les règlements d’Industrie Canada
interdisent strictement l’utilisation d’antennes dont le
gain est supérieur à cette limite. L’impédance requise
de l’antenne est de 50 ohms.
Afin de réduire le risque d’interférence aux autres
utilisateurs, le type d’antenne et son gain doivent
être choisis de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas supérieure
au niveau requis pour obtenir une communication
satisfaisante.
Regulatory Information
Avis de non-responsabilité concernant les
appareils sans fil
Les performances maximales pour les réseaux sans fil
sont tirées des spécifications de la norme IEEE 802.11.
Les performances réelles peuvent varier, notamment
en fonction de la capacité du réseau sans fil, du débit
de la transmission de données, de la portée et de la
couverture. Les performances dépendent de facteurs,
conditions et variables multiples, en particulier de la
distance par rapport au point d’accès, du volume du trafic
réseau, des matériaux utilisés dans le bâtiment et du
type de construction, du système d’exploitation et de la
combinaison de produits sans fil utilisés, des interférences
et de toute autre condition défavorable.
Avis d’Industrie Canada concernant l’exposition
aux radiofréquences :
Ce matériel est conforme aux limites établies par IC
en matière d’exposition aux radiofréquences dans un
environnement non contrôlé. Ce matériel doit être installé
et utilisé à une distance d’au moins 20 cm entre l’antenne
et le corps de l’utilisateur.
L’émetteur ne doit pas être placé près d’une autre antenne
ou d’un autre émetteur, ou fonctionner avec une autre
antenne ou un autre émetteur.
Wireless Disclaimer
The maximum performance for wireless is derived from
IEEE Standard 802.11 specifications. Actual performance
can vary, including lower wireless network capacity,
data throughput rate, range and coverage. Performance
depends on many factors, conditions and variables,
including distance from the access point, volume of
network traffic, building materials and construction,
operating system used, mix of wireless products used,
interference and other adverse conditions.
Wireless-G Internet Home Monitoring Camera
36
Appendix E
User Information for Consumer Products
Covered by EU Directive 2002/96/EC on
Waste Electric and Electronic Equipment
(WEEE)
This document contains important information for users
with regards to the proper disposal and recycling of
Linksys products. Consumers are required to comply with
this notice for all electronic products bearing the following
symbol:
Regulatory Information
Ceština (Czech) - Informace o ochraně životního
prostředí pro zákazníky v zemích Evropské unie
Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené
tímto symbolem na produktu anebo na obalu bylo likvidováno
s netříděným komunálním odpadem. Tento symbol udává,
že daný produkt musí být likvidován odděleně od běžného
komunálního odpadu. Odpovídáte za likvidaci tohoto produktu
a dalších elektrických a elektronických zařízení prostřednictvím
určených sběrných míst stanovených vládou nebo místními
úřady. Správná likvidace a recyklace pomáhá předcházet
potenciálním negativním dopadům na životní prostředí a lidské
zdraví. Podrobnější informace o likvidaci starého vybavení si
laskavě vyžádejte od místních úřadů, podniku zabývajícího se
likvidací komunálních odpadů nebo obchodu, kde jste produkt
zakoupili.
Dansk (Danish) - Miljøinformation for kunder i EU
English - Environmental Information for Customers in
the European Union
European Directive 2002/96/EC requires that the equipment
bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol
indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and
human health. For more detailed information about the disposal
of your old equipment, please contact your local authorities,
waste disposal service, or the shop where you purchased the
product.
Български (Bulgarian) - Информация относно
опазването на околната среда за потребители в
Европейския съюз
Европейска директива 2002/96/EC изисква уредите, носещи
този символ върху изделието и/или опаковката му, да не
се изхвърля т с несортирани битови отпадъци. Символът
обозначава, че изделието трябва да се изхвърля отделно от
сметосъбирането на обикновените битови отпадъци. Ваша
е отговорността този и другите електрически и електронни
уреди да се изхвърлят в предварително определени от
държавните или общински органи специализирани пунктове
за събиране. Правилното изхвърляне и рециклиране
ще спомогнат да се предотвратят евентуални вредни за
околната среда и здравето на населението последствия. За
по-подробна информация относно изхвърлянето на вашите
стари уреди се обърнете към местните власти, службите за
сметосъбиране или магазина, от който сте закупили уреда.
Wireless-G Internet Home Monitoring Camera
EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol
på produktet og/eller emballagen ikke må bortskaffes som
usorteret kommunalt affald. Symbolet betyder, at dette produkt
skal bortskaffes adskilt fra det almindelige husholdningsaffald.
Det er dit ansvar at bortskaffe dette og andet elektrisk og
elektronisk udstyr via bestemte indsamlingssteder udpeget
af staten eller de lokale myndigheder. Korrekt bortskaffelse
og genvinding vil hjælpe med til at undgå mulige skader for
miljøet og menneskers sundhed. Kontakt venligst de lokale
myndigheder, renovationstjenesten eller den butik, hvor du
har købt produktet, angående mere detaljeret information om
bortskaffelse af dit gamle udstyr.
Deutsch (German) - Umweltinformation für Kunden
innerhalb der Europäischen Union
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit
diesem Symbol versehen ist , nicht zusammen mit unsortiertem
Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf
hin, dass das Produkt von regulärem Haushaltmüll getrennt
entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses
Gerät und andere elektrische und elektronische Geräte über
die dafür zuständigen und von der Regierung oder örtlichen
Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche
Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur
Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an
die örtlichen Behörden oder städtischen Entsorgungsdienste
oder an den Händler, bei dem Sie das Produkt erworben haben.
37
Appendix E
Regulatory Information
Eesti (Estonian) - Keskkonnaalane informatsioon
Euroopa Liidus asuvatele klientidele
Français (French) - Informations environnementales
pour les clients de l’Union européenne
Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on
seadmeid, millel on tootel või pakendil käesolev sümbol ,
keelatud kõrvaldada koos sorteerimata olmejäätmetega. See
sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest
olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva
ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike
ametiasutuste poolt ette nähtud kogumispunktide kaudu.
Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida
võimalikke negatiivseid tagajärgi keskkonnale ning inimeste
tervisele. Vanade seadmete kõrvaldamise kohta täpsema
informatsiooni saamiseks võtke palun ühendust kohalike
ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te
toote ostsite.
La directive européenne 2002/96/CE exige que l’équipement
sur lequel est apposé ce symbole sur le produit et/ou son
emballage ne soit pas jeté avec les autres ordures ménagères. Ce
symbole indique que le produit doit être éliminé dans un circuit
distinct de celui pour les déchets des ménages. Il est de votre
responsabilité de jeter ce matériel ainsi que tout autre matériel
électrique ou électronique par les moyens de collecte indiqués
par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme
ont pour but de lutter contre l’impact néfaste potentiel de ce
type de produits sur l’environnement et la santé publique. Pour
plus d’informations sur le mode d’élimination de votre ancien
équipement, veuillez prendre contact avec les pouvoirs publics
locaux, le service de traitement des déchets, ou l’endroit où vous
avez acheté le produit.
Español (Spanish) - Información medioambiental para
clientes de la Unión Europea
La Directiva 2002/96/CE de la UE exige que los equipos que
lleven este símbolo en el propio aparato y/o en su embalaje
no deben eliminarse junto con otros residuos urbanos no
seleccionados. El símbolo indica que el producto en cuestión
debe separarse de los residuos domésticos convencionales con
vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de
los puntos de recogida que ponen a su disposición el gobierno y
las autoridades locales. Al desechar y reciclar correctamente estos
aparatos estará contribuyendo a evitar posibles consecuencias
negativas para el medio ambiente y la salud de las personas. Si
desea obtener información más detallada sobre la eliminación
segura de su aparato usado, consulte a las autoridades locales,
al servicio de recogida y eliminación de residuos de su zona o
pregunte en la tienda donde adquirió el producto.
ξλληνικά (Greek) - Στοιχεία περιβαλλοντικής
προστασίας για πελάτες εντός της Ευρωπαϊκής
Ένωσης
Η Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισμός ο οποίος
φέρει αυτό το σύμβολο στο προϊόν και/ή στη συσκευασία
του δεν πρέπει να απορρίπτεται μαζί με τα μικτά κοινοτικά
απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα
πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά
απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος
και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των
καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων οι
οποίες παρέχονται από το κράτος ή τις αρμόδιες τοπικές αρχές.
Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη
πιθανών αρνητικών συνεπειών για το περιβάλλον και την υγεία.
Για περισσότερες πληροφορίες σχετικά με την απόρριψη του
παλιού σας εξοπλισμού, παρακαλώ επικοινωνήστε με τις τοπικές
αρχές, τις υπηρεσίες απόρριψης ή το κατάστημα από το οποίο
αγοράσατε το προϊόν.
Wireless-G Internet Home Monitoring Camera
Italiano (Italian) - Informazioni relative all’ambiente
per i clienti residenti nell’Unione Europea
La direttiva europea 2002/96/EC richiede che le apparecchiature
contrassegnate con questo simbolo
sul prodotto e/o
sull’imballaggio non siano smaltite insieme ai rifiuti urbani
non differenziati. Il simbolo indica che questo prodotto non
deve essere smaltito insieme ai normali rifiuti domestici. È
responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante
le specifiche strutture di raccolta indicate dal governo o dagli
enti pubblici locali. Il corretto smaltimento ed il riciclaggio
aiuteranno a prevenire conseguenze potenzialmente negative
per l’ambiente e per la salute dell’essere umano. Per ricevere
informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli
enti pubblici di competenza, il servizio di smaltimento rifiuti o il
negozio nel quale avete acquistato il prodotto.
Latviešu valoda (Latvian) - Ekoloģiska informācija
klientiem Eiropas Savienības jurisdikcijā
Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota
zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst
izmest nešķirotā veidā kopā ar komunālajiem atkritumiem
(tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē
to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar
parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo
un citas elektriskas un elektroniskas ierīces izmest atkritumos,
izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko
nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos
un pārstrāde tiek veikta pareizi, tad mazinās iespējamais
kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par
novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt
vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā,
kur iegādājāties šo izstrādājumu.
38
Appendix E
Regulatory Information
Lietuvškai (Lithuanian) - Aplinkosaugos informacija,
skirta Europos Sąjungos vartotojams
Nederlands (Dutch) - Milieu-informatie voor klanten
in de Europese Unie
Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir
kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį),
negalima šalinti kartu su nerūšiuotomis komunalinėmis
atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai
nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad
ši ir kita elektros ar elektroninė įranga būtų šalinama per tam
tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo
sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta
galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos
apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios
institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose
įsigijote tą gaminį.
De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die
is voorzien van dit symbool op het product of de verpakking,
niet mag worden ingezameld met niet-gescheiden huishoudelijk
afval. Dit symbool geeft aan dat het product apart moet worden
ingezameld. U bent zelf verantwoordelijk voor de vernietiging
van deze en andere elektrische en elektronische apparatuur via de
daarvoor door de landelijke of plaatselijke overheid aangewezen
inzamelingskanalen. De juiste vernietiging en recycling van
deze apparatuur voorkomt mogelijke negatieve gevolgen voor
het milieu en de gezondheid. Voor meer informatie over het
vernietigen van uw oude apparatuur neemt u contact op met
de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de
winkel waar u het product hebt aangeschaft.
Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti
fl-Unjoni Ewropea
Norsk (Norwegian) - Miljøinformasjon for kunder i EU
Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih issimbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema
ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika
li dan il-prodott għandu jintrema separatament minn ma’ liskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi
dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku
permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew
mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin
jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u
għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata
dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja
lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew
il-ħanut minn fejn xtrajt il-prodott.
EU-direktiv 2002/96/EF krever at utstyr med følgende symbol
avbildet på produktet og/eller pakningen, ikke må kastes
sammen med usortert avfall. Symbolet indikerer at dette
produktet skal håndteres atskilt fra ordinær avfallsinnsamling
for husholdningsavfall. Det er ditt ansvar å kvitte deg med
dette produktet og annet elektrisk og elektronisk avfall via egne
innsamlingsordninger slik myndighetene eller kommunene
bestemmer. Korrekt avfallshåndtering og gjenvinning vil
være med på å forhindre mulige negative konsekvenser for
miljø og helse. For nærmere informasjon om håndtering av
det kasserte utstyret ditt, kan du ta kontakt med kommunen,
en innsamlingsstasjon for avfall eller butikken der du kjøpte
produktet.
Magyar (Hungarian) - Környezetvédelmi információ az
európai uniós vásárlók számára
Polski (Polish) - Informacja dla klientów w Unii
Europejskiej o przepisach dotyczących ochrony
środowiska
A 2002/96/EC számú európai uniós irányelv megkívánja, hogy
azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán
az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági
hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott
termék kidobásakor a szokványos háztartási hulladékelszállítási
rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön
felelõssége, hogy ezt, és más elektromos és elektronikus
berendezéseit a kormányzati vagy a helyi hatóságok által
kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ
hulladékfeldolgozás segít a környezetre és az emberi egészségre
potenciálisan ártalmas negatív hatások megelõzésében. Ha
elavult berendezéseinek felszámolásához további részletes
információra van szüksége, kérjük, lépjen kapcsolatba a helyi
hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal
üzlettel, ahol a terméket vásárolta.
Wireless-G Internet Home Monitoring Camera
Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt
oznaczony symbolem znajdującym się na produkcie i/lub jego
opakowaniu nie był wyrzucany razem z innymi niesortowanymi
odpadami komunalnymi. Symbol ten wskazuje, że produkt
nie powinien być usuwany razem ze zwykłymi odpadami z
gospodarstw domowych. Na Państwu spoczywa obowiązek
wyrzucania tego i innych urządzeń elektrycznych oraz
elektronicznych w punktach odbioru wyznaczonych przez władze
krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób
i jego recykling pomogą zapobiec potencjalnie negatywnym
konsekwencjom dla środowiska i zdrowia ludzkiego. W celu
uzyskania szczegółowych informacji o usuwaniu starego sprzętu,
prosimy zwrócić się do lokalnych władz, służb oczyszczania
miasta lub sklepu, w którym produkt został nabyty.
39
Appendix E
Regulatory Information
Português (Portuguese) - Informação ambiental para
clientes da União Europeia
Slovenčina (Slovene) - Okoljske informacije za stranke
v Evropski uniji
A Directiva Europeia 2002/96/CE exige que o equipamento
que exibe este símbolo no produto e/ou na sua embalagem
não seja eliminado junto com os resíduos municipais não
separados. O símbolo indica que este produto deve ser
eliminado separadamente dos resíduos domésticos regulares.
É da sua responsabilidade eliminar este e qualquer outro
equipamento eléctrico e electrónico através das instalações
de recolha designadas pelas autoridades governamentais ou
locais. A eliminação e reciclagem correctas ajudarão a prevenir
as consequências negativas para o ambiente e para a saúde
humana. Para obter informações mais detalhadas sobre a
forma de eliminar o seu equipamento antigo, contacte as
autoridades locais, os serviços de eliminação de resíduos ou o
estabelecimento comercial onde adquiriu o produto.
Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme,
označene s tem simbolom – na izdelku in/ali na embalaži – med
običajne, nerazvrščene odpadke. Ta simbol opozarja, da je treba
izdelek odvreči ločeno od preostalih gospodinjskih odpadkov.
Vaša odgovornost je, da to in preostalo električno in elektronsko
opremo odnesete na posebna zbirališča, ki jih določijo
državne ustanove ali lokalna uprava. S pravilnim odlaganjem
in recikliranjem boste preprečili morebitne škodljive vplive na
okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare
opreme, se obrnite na lokalno upravo, odpad ali trgovino, kjer
ste izdelek kupili.
Română (Romanian) - Informaţii de mediu pentru
clienţii din Uniunea Europeană
Directiva europeană 2002/96/CE impune ca echipamentele care
prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să
nu fie casate împreună cu gunoiul menajer municipal. Simbolul
indică faptul că acest produs trebuie să fie casat separat de
gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi
acest produs şi alte echipamente electrice şi electronice prin
intermediul unităţilor de colectare special desemnate de guvern
sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta
la prevenirea potenţialelor consecinţe negative asupra sănătăţii
mediului şi a oamenilor. Pentru mai multe informaţii detaliate
cu privire la casarea acestui echipament vechi, contactaţi
autorităţile locale, serviciul de salubrizare sau magazinul de la
care aţi achiziţionat produsul.
Slovenčina (Slovak) - Informácie o ochrane životného
prostredia pre zákazníkov v Európskej únii
Podľa európskej smernice 2002/96/ES zariadenie s týmto
na produkte a/alebo jeho balení nesmie byť
symbolom
likvidované spolu s netriedeným komunálnym odpadom.
Symbol znamená, že produkt by sa mal likvidovať oddelene
od bežného odpadu z domácností. Je vašou povinnosťou
likvidovať toto i ostatné elektrické a elektronické zariadenia
prostredníctvom špecializovaných zberných zariadení určených
vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia
pomôže zabrániť prípadným negatívnym dopadom na životné
prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie
informácie o likvidácii starého zariadenia, obráťte sa, prosím, na
miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov
alebo obchod, v ktorom ste si produkt zakúpili.
Suomi (Finnish) - Ympäristöä koskevia tietoja EUalueen asiakkaille
EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä
symboli
itse tuotteessa ja/tai sen pakkauksessa, laitteistoa
ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana.
Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään
tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää
tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet
viemällä tuote tai tuotteet viranomaisten määräämään
keräyspisteeseen. Laitteiston oikea hävittäminen estää
mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten
terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta
saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä
myymälästä, josta ostit tuotteen.
Svenska (Swedish) - Miljöinformation för kunder i
Europeiska unionen
Det europeiska direktivet 2002/96/EC kräver att utrustning med
denna symbol på produkten och/eller förpackningen inte får
kastas med osorterat kommunalt avfall. Symbolen visar att denna
produkt bör kastas efter att den avskiljts från vanligt hushållsavfall.
Det faller på ditt ansvar att kasta denna och annan elektrisk och
elektronisk utrustning på fastställda insamlingsplatser utsedda
av regeringen eller lokala myndigheter. Korrekt kassering och
återvinning skyddar mot eventuella negativa konsekvenser
för miljön och personhälsa. För mer detaljerad information om
kassering av din gamla utrustning kontaktar du dina lokala
myndigheter, avfallshanteringen eller butiken där du köpte
produkten.
WEB: For additional information, please visit
www.linksys.com
7092010NC-AI
Wireless-G Internet Home Monitoring Camera
40

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:09:27 13:30:25-07:00
Modify Date                     : 2007:09:27 13:30:25-07:00
Page Count                      : 20
Creation Date                   : 2007:09:27 20:30:25Z
Mod Date                        : 2007:09:27 20:30:25Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : ltsai
Metadata Date                   : 2007:09:27 20:30:25Z
Creator                         : ltsai
Title                           : ........WVC54GCA UserManual 092.PDF

EXIF Metadata provided by EXIF.tools