LITE ON TECHNOLOGY BMK201 Bluetooth Speaker User Manual 515300108247 size

LITE-ON Technology Corp. Bluetooth Speaker 515300108247 size

BMK-201 User manual Revised 1128

APPROVED CHECKED DESIGNEDMODEL No.PART NAMEPART No.BMK-201 User Manual515300108247李采婕blue2013.10.08材質 模造( ): 100p 紙 上光方式( ): no顏色 black( ): 尺寸( ): 60x60mm公差( ):+-0.5mm 60mm60mm(封面)(封底-空白)(內頁1) (內頁2) (內頁3)(折法)BMK-201 User ManualSchematic diagramLED USB LanyardMICVOL +MFBVOL -Charging starts when the unit and the computer are connected. Charging is completed in about 3.5 hours at most and the indicator goes off automatically.The indicator is lit during charging.4 Make the Bluetooth connection from the Bluetooth device.1 Place the Bluetooth device within 1 meter of this unit.2 Long press MFB button up to 6 seconds to turn on this unit and enters pairing mode. (you can hear 2 beep prompts) The indicator flashes fast in pairing mode for 2 minutes.3 Perform the pairing procedure on the Bluetooth device to detect this unit.When the list of detected devices appears on the display of the Bluetooth device, select “BMK-201 V0.x” If passkey input is required on the display of a Bluetooth device, input “0000.”Charge the unitPairing and connecting with the Bluetooth deviceOperate your mobile phone to make a call.- To terminate a call, press the MFB button on the unit.Press the MFB button on the unit when an incoming call arrives.- Operate in the same way when an incoming call arrives while you are listening to the music.Making a call/Receiving a callProfile: HSP, HFP1 Press MFB button for 3 seconds to turn on the unit.(you can hear the long prompt and the indicator is lit solidly for 5 seconds)2 Make the Bluetooth connection from the Bluetooth device.Connecting with the paired deviceStart playback on the Bluetooth device.Listening and CallingOperate the unit after making Bluetooth connectionPress MFB button for 3 seconds to turn off the unit.(you can hear 3 beep prompts and the indicator is lit)Turn off the unitListening to musicProfile: A2DP
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimetersbetween the radiator and your body.

Navigation menu