LITE ON TECHNOLOGY BMK201 Bluetooth Speaker User Manual 515300108247 size
LITE-ON Technology Corp. Bluetooth Speaker 515300108247 size
BMK-201 User manual Revised 1128
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2130740 |
| Application ID | cJ2qduC1bLCxEsPItPH1Xw== |
| Document Description | BMK-201 User manual Revised 1128 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.95kB (1449391 bits) |
| Date Submitted | 2013-11-29 00:00:00 |
| Date Available | 2013-11-29 00:00:00 |
| Creation Date | 2013-10-08 13:56:28 |
| Producing Software | Corel PDF Engine Version 15.1.0.588 |
| Document Lastmod | 2013-11-29 09:45:35 |
| Document Title | 515300108247 - size |
| Document Creator | CorelDRAW X5 |
| Document Author: | Blue Lee |
60mm MFB Schematic diagram (折法) BMK-201 User Manual VOL - 60mm VOL + MIC LED USB Lanyard (封底-空白) Charge the unit (封面) Making a call/Receiving a call Profile: HSP, HFP Charging starts when the unit and the computer are connected. Charging is completed in about 3.5 hours at most and the indicator goes off automatically. The indicator is lit during charging. 4 Make the Bluetooth connection from the Bluetooth device. Connecting with the paired device Pairing and connecting with the Bluetooth device 1 Place the Bluetooth device within 1 meter of this unit. 2 Long press MFB button up to 6 seconds to turn on this unit Press MFB button for 3 seconds to turn on the unit.(you can Press the MFB button on the unit when an incoming call arrives. - Operate in the same way when an incoming call arrives while you are listening to the music. hear the long prompt and the indicator is lit solidly for 5 seconds) Turn off the unit 2 Make the Bluetooth connection from the Bluetooth device. and enters pairing mode. (you can hear 2 beep prompts) The indicator flashes fast in pairing mode for 2 minutes. Listening and Calling Perform the pairing procedure on the Bluetooth device to Listening to music detect this unit.When the list of detected devices appears on the display of the Bluetooth device, select “BMK-201 V0.x” If passkey input is required on the display of a Bluetooth device, input “0000.” Profile: A2DP (內頁1) Operate your mobile phone to make a call. - To terminate a call, press the MFB button on the unit. Press MFB button for 3 seconds to turn off the unit.(you can hear 3 beep prompts and the indicator is lit) Operate the unit after making Bluetooth connection Start playback on the Bluetooth device. (內頁2) (內頁3) (材質): 100p 模造紙 (上光方式): no (顏色): black (尺寸): 60x60mm (公差):+-0.5mm MODEL No. BMK-201 PART NAME User Manual APPROVED CHECKED DESIGNED PART No. 李采婕 blue 2013.10.08 515300108247 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equ ipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co mmunications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or televi sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measu res: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party r esponsible for compliance could void your authority to operate the equipm ent. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Blue Lee Create Date : 2013:10:08 13:56:28+08:00 Modify Date : 2013:11:29 09:45:35Z XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Corel PDF Engine Version 15.1.0.588 Creator Tool : CorelDRAW X5 Metadata Date : 2013:11:29 09:45:35Z Document ID : uuid:cd22f58e-bd75-4ff0-93ab-ac2891deb8e8 Instance ID : uuid:c50734b4-752a-4973-9983-773183cae551 Format : application/pdf Title : 515300108247 - size Creator : Blue Lee Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools