LITE ON TECHNOLOGY WP8331 802.11ac Dual Band PoE Access point User Manual 05 Revise

Download:
Mirror Download [FCC.gov]
Document ID	3448674
Application ID	Sz7uL9YWPX9CVDCirA6EMQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.74kB (221733 bits)
Date Submitted	2017-07-03 00:00:00
Date Available	2017-08-11 00:00:00
Creation Date	2017-06-20 17:24:50
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2017-06-20 17:27:37
Document Title	Microsoft Word - 05.User manual(Revise)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	User

WP8331
802.11ac Dual Band PoE Access Point
External Specification
Version: V0.4
This document contains confidential proprietary information and is property of LTC. The contents of this
document should not be disclosed to unauthorized persons without the written consent of LTC.
Specification Revision History
Version Revised Date Person Name
Content Revised
0.1
0.2
0.3
2016/05/13
2016/05/20
2016/08/03
Flora Yu
Flora Yu
Flora Yu
0.4
2016/1013
Flora Yu
First edit
Change CPU platform
Change BLE chip to support interface via USB
Update certification requirement
Increasing Rx sensibility number
Page 2 of 8
1 Product Descriptions
The WP8331 is a two radios, dual band, 802.11ac access point. It provides powerful WLAN supporting
wireless speed up to 300Mbps on 2.4GHz and 867Mbps on 5GHz, one Ethernet port to connect to the
backbone network, one Ethernet ports can be aggregated to connect to one computer through the
network cables. Besides, the WP8331 supports 802.3at PoE PD to allow the device powered by PoE
switch remotely.
To protect data during wireless transmission, the device supports WEP data encryption and
WPA/WPA2 wireless security to ensure network safely.
The WP8331 is ideal for a variety of medium density enterprise and hotspot environments including
SMBs, hotels, retail outlets and branch offices.
2 Product Specifications and Features
2.1 H/W Features
2.1.1 Specification
Key Components / Connectors / Performance
Processor
QCA IPQ4028
Wireless Chipset
Integrated with IPQ4028 – 2.4G
Integrated with IPQ4028 – 5G
BT/BLE
CSR8510 (optional, layout reserved via USB to SoC)
GE PHY
QCA8072
SPI Flash
64Mbytes (pin-to-pin downsize) – default
NAND Flash
128MB – optional/reserved
DDR3
256Mbytes (pin-to-pin downsize or upsize to 1GB)
Console
Internal console port
Interfaces
1x 10/100/1000 Base-TX MDI/MDIX RJ-45 port with PoE PD 802.3 at
1x 10/100/1000 Base-TX MDI/MDIX RJ-45 port
Ethernet
Compliant with following standards:
1. IEEE 802.3/802.3u
2. Hardware based 10/100/1000, full/half, flow control auto negotiation
3. Full duplex IEEE 802.3x flow control and half duplex back-pressure
flow control
Page 3 of 8
802.11ac 2.4GHz on board
802.11ac 5GHz on board
BT/BLE on board
2 internal antennas – 2.4G antenna
2 internal antennas – 5G
1 internal antenna – BT/BLE
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac compliant
Wireless
Data Rate:
802.11a: 6, 9, 12, 18, 24, 36, 48, 54
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6 Mbps
802.11b: 11, 5.5, 2 & 1 Mbps
802.11n :
20 MHz BW: 130, 117, 104, 78, 52, 39, 26, 13Mbps
40 MHz BW: 270, 243, 216, 162, 108, 81, 54, 27 Mbps
802.11ac :
20MHz BW : 173, 144, 130, 115, 86, 57, 43, 28,14 Mbps
40MHz BW : 400, 360, 300, 270, 240, 180, 120, 90, 60, 30 Mbps
80MHz BW : 867, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Modulation:
802.11g: OFDM, BPSK, QPSK, 16QAM, 64QAM
802.11b:CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK (1Mbps), DSSS
802.11n: PSK/CCK, DBPSK, DQPSK, OFDM
802.11ac: DSSS, OFDM, MIMO-OFDM, 16QAM, 64QAM, 256QAM
Operating Frequencies:
USA – FCC
2412~2462MHz
Canada – IC
2412~2462MHz
Europe – ETSI
2412~2472MHz
Operating Frequencies:
2400 ~ 2484.5 MHz
5150MHz ~ 5850MHz for US & Canada
5150MHz ~ 5350MHz for Europe
5470MHz ~ 5725MHz for Europe
5030MHz~5091MHz and 5150MHz ~ 5250MHz for Japan
5150MHz ~ 5350MHz for Australia
5470MHz ~ 5725MHz for Australia (except channel 120, 124 and 128)
5725Mhz ~ 5825Mhz for Australia
Output Power:
2.4GHz band (discrete PA/LNA)
802.11b: 24.63 +/- 2 dBm
802.11g: 24.16 +/- 2 dBm
802.11n: 24.34 +/- 2 dBm
5GHz band (discrete PA/LNA)
UNII-1: 25.60 dBm +/- 2 dBm
UNII-2a: 23.08 dBm +/- 2 dBm
UNII-2c: 23.13 dBm +/- 2 dBm
UNII-3: 25.02 dBm +/- 2 dBm
Page 4 of 8
Rx sensitivity:
2.4GHz band,
802.11b@11Mbps: -91 +/- 2dBm
802.11g@54Mbps: -76 +/- 2dBm
802.11n MCS7: -73 +/-2 dBm
5GHz band,
802.11a @6Mbps: -93+/- 2dBm
802.11a @54Mbps: -76+/- 2dBm
802.11n MCS7 : -72 +/- 2dBm
802.11ac MCS9:-64 +/- 2dBm
BT
Peak Gain: 2.6 dBi
2.4G
Ant _1: Peak Gain: 4.7 dBi
Ant _2: Peak Gain: 3.3 dBi
5G
5180~5240 MHz
Ant _1: Peak Gain: 3.8 dBi
Ant _2: Peak Gain: 5.0 dBi
5260~5320 MHz
Ant _1: Peak Gain: 4.3 dBi
Ant _2: Peak Gain: 5.0 dBi
Power Directional Gain: 4.66 dBi
Power Density Directional Gain: 7.67 dBi
5500~5720 MHz
Ant _1: Peak Gain: 5.1dBi
Ant _2: Peak Gain: 4.7 dBi
Power Directional Gain: 4.90 dBi
Power Density Directional Gain: 7.91 dBi
5745~5825 MHz
Ant _1: Peak Gain: 5.1 dBi
Ant _2: Peak Gain: 5.0 dBi
Impedance: 50 Ohm nominal
Antenna efficiency - 2.4G: 50%
Antenna efficiency - 5G: 60%
Antenna efficiency - BLE: 40%
V.S.W.R.: 2.0:1 Max
Host 2.0 (optional)
1 x reset button
USB
Reset
2.1.2 LED indicators
from left to right (total 5 LEDs)
PWR
LAN1
LAN2
5G
2.4G
Location
LED Indicative
Color
Status
Description
Per device
Power
Green
Solid Light
Light off
Power on
Power off
Page 5 of 8
Green (5G)
WLAN
Amber
(2.4G)
Solid Light
Connect to WLAN port
Blinking
WLAN activity present
Light off
No activity or power off
Solid Light
Connect to WLAN port
Blinking
WLAN activity present
Light off
No activity or power off
Device connected to LAN port at
10/100/1000Mbps
LAN Activity present
Not Connected
Solid Light
Per port
LAN
Green
Blinking
Light off
2.2 S/W Features
Software specification
Feature Item
Wireless
Feature
Wireless mode
Detailed Description
11b/g/n
11a/ac
Access point mode (Support both normal station
and WDS station)
Operation mode
Bandwidth
Aggregation in 11n mode
SSID
QoS
Other parameter configurable
via Web UI
Security
Authentication
Management
Encryption
Network setting
Statistics
SNMP v1/v2
Wireless ACL in AP mode
Firmware upgrade
System log
Discovery tools
20MHz
20/40MHz dynamic
20/40/80MHz dynamic
A-MPDU
Support 4 virtual AP
EDCA WMM
QoS-DSCP configurable via web UI
Transmit power adjustable (four level: full, 1/2,
1/4, 1/8)
DTIM
Guard interval (short/long)
WPA/WPA2 Personal (PSK), 802.1X
Authentication with RADIUS Client
Enterprise (802.1x): PEAP, TTLS, TLS
AES, TKIP, WEP 64/128,
IPv4 static IP & DHCP client
Statistics of wired, wireless associated stations
accessible
MIBII(survey throughput, data statistics,
location)
Based on MAC address
via Web UI
via SNMP
Syslog
LiteON Locator
For customization, like GUI / SNMP MIBs/ configuration tool or customer internal utility, will discuss
with customer once project is awarded.
Page 6 of 8
3 Mechanical and Environment Design
3.1 Case (details refer to ME drawing separately)
A. ID/Tool (leverage WP8336-AB)
This ID is a small form factor within 146x146mm. The bottom ID/ME shall seamlessly
(without tooling updates) support potential different styles of top cover for customers.
The ID has a Kensington lock hole on the enclosure.
B. I/O port (back view, ordering from right to left)
DC IN RESET LAN1
LAN2
(PoE)
C. Mounting Kit
1. It needs to accommodate Mojo four mounting kits for T-bar and hard surface mount.
2. There are three T-bar width supported, 15, 24 and 38mm.
3. The hard flat surface mounting including wall and ceiling mount
a. standard, 2 key holes in the central part on bottom case (optional)
b. optional accessory, separate bracket
3.2 Physical & Environment
3.2.1 Power
- PoE DC 48V
- Optional external power adapter, (to be quoted separately)
 Input: 100-240VAC, 50/60Hz
 Output: Switching12V DC/1.5A (for DC jack center pin 2.0mm)
- Reset Button: Reset to factory default by pushing button for 5 sec
Page 7 of 8
3.2.2 Operation Temperature
- Temp: 0° C to +45° C (+32° F to +113° F)
- Humidity: 5% ~ 95%R.H non-condensing
3.2.3 Storage Temperature
- Temp: -4℉ to 149℉ (-20℃ to 65℃)
- Humidity: 5% ~ 95% non-condensing
4 Certification Requirements
STATUATORY
USA (Non DFS)
USA (DFS)
Canada (IC)
Europe (CE)
Japan (TELEC)
India (WPC)
Korea (KCC)
Taiwan (NCC)
China (MII-NAL)
AUS/NZ
SAFETY
USA UL
Canada cUL
WW CB (IECEE)
China CCC
Others
RoHS (self- announcement)
WEEE (self- announcement)
Page 8 of 8
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co‐located with any other transmitters except in
accordance with FCC multi‐transmitter product procedures.
The device for operation in the band 5150–5250 MHz is only for indoor use
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20
cm between the radiator & your body.
IC Statement:
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Pour les produits disponibles aux États‐Unis / Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélection d'autres canaux n'est pas possible.
This device and its antenna(s) must not be co‐located with any other transmitters except in
accordance with IC multi‐transmitter product procedures.
Refering to the multi‐transmitter policy, multiple‐transmitter(s) and module(s) can be
operated simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co‐localisés ou fonctionnement en
association avec une autre antenne ou transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co‐channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150‐5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725‐5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits specified for point‐to‐point and
non‐point‐to‐point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725‐5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non
point à point, selon le cas.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250‐ 5350 MHz,
5470‐5600 MHz and 5650‐5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes
5250‐5350 MHz, 5470‐5600 MHz et 5650‐5725 MHz.
The maximum antenna gain permitted for devices in the bands 5250‐5350 MHz and
5470‐5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250‐5350 MHz et
5470‐5725 MHz doit se conformer à la limite de p.i.r.e.
Users should also be advised that high‐power radars are allocated as primary users (i.e.
priority users) of the bands 5250‐5350 MHz and 5650‐5850 MHz and that these radars could
cause interference and/or damage to LE‐LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux (c.‐à‐d., qu’ils ont la priorité) pour les bandes
5250‐5350 MHz et 5650‐5850 MHz et que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN‐EL.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum distance 20
cm
between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum
de 20 cm de distance entre la source de rayonnement et votre corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : User
Create Date                     : 2017:06:20 17:24:50+08:00
Modify Date                     : 2017:06:20 17:27:37+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : User
Title                           : Microsoft Word - 05.User manual(Revise)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:06:20 17:27:37+08:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:9d09ad52-2f01-4377-9174-ce62efc3abf2
Instance ID                     : uuid:c04ec0de-fdf3-4143-8bfb-504e4c4227c3
Page Count                      : 11

EXIF Metadata provided by EXIF.tools