LONGSYS ELECTRONICS WK1230 Wifi Module User Manual WK1230 Kit Demo
LONGSYS ELECTRONICS (HK) CO.,LIMITED Wifi Module WK1230 Kit Demo
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2657916 |
| Application ID | yIucl71heuvmXgflQ0j5lA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 225.77kB (2822172 bits) |
| Date Submitted | 2015-06-25 00:00:00 |
| Date Available | 2015-06-25 00:00:00 |
| Creation Date | 2015-06-24 10:37:52 |
| Document Lastmod | 2015-06-25 15:05:49 |
| Document Title | WK1230 Kit Demo 用户手册 |
| Document Creator | WPS Office |
| Document Author: | win7 |
WK1230 OEM Installation Manual WK1230 Kit OEM Installation Manual V1.1 June 2015 Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -1- WK1230 OEM Installation Manual Version Author Date Description V1.0 Zhufu.Lin 2015.05 Initial release V1.1 Jeans 2015.6 Add external antenna description The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application; A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -2- WK1230 OEM Installation Manual Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC ID : 2AD PD WK1230” any similar wording that expresses the same meaning may be used. FCC RF Exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -3- WK1230 OEM Installation Manual 1. 2. 4. Overview.................................................................................................................................... 5 1.1. Introduction...................................................................................................................... 5 1.2. WK1230 mode...................................................................................................................5 1.3. WK1230 working environment......................................................................................... 5 Hardware..................................................................................................................................... 6 2.1. WK1230 DVB..................................................................................................................... 6 3.1. WK1230............................................................................................................................. 7 3.2. WK1230 Kit connection.....................................................................................................8 Wukoon App Operation.......................................................................................................... 9 4.1. Wukoon Apk System requirements and installation........................................................ 9 4.2. Wukoon Apk configuration equipment............................................................................ 9 4.2.1. Color and mode switch..................................................................................................9 4.2.2. App configuration........................................................................................................10 4.3. Control equipment.......................................................................................................... 13 4.3.1. Search and refresh device........................................................................................... 13 4.3.2. Select equipment........................................................................................................ 13 4.3.2.1. 4.4. Control a group equipment..................................................................................... 14 APP other functions........................................................................................................ 17 4.4.1. APP upgrade................................................................................................................ 17 4.4.2. Reconstruction equipment..........................................................................................18 4.4.3. Equipment upgrade.....................................................................................................18 4.5. Questions........................................................................................................................ 20 Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -4- WK1230 OEM Installation Manual 1. Overview 1.1. Introduction The WK1230 kit demonstration is mainly making WK1230 connected to user router network and user can communicate with WK1230 through Wi-Fi to realize the app wukoon and wechat to control the state of LED. 1.2. WK1230 mode The WK1230 supports 2 modes：Smartlink、Station. Smartlink：The equipment goes into the mode when the module is not connected to the router. In this mode WK1230 is in the listening state of intelligent connection and the user can connect to the user of the router through wukoon app or wechat configuration device. Station：The WK1230 module is connected with user on the router and users can use the wukoon App to control LED light state in the LAN. If WK1230 module supports wechat function and the module through the router connected to a wide area network, users can use wechat for remote control. 1.3. WK1230 working environment WK1230 support 4G network but does not support 5g network , UDP network prohibited and the login account (such as CMCC) network. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -5- WK1230 OEM Installation Manual 2. Hardware 2.1.WK1230 DVB 3. figure 1 WK1230 DVB Top Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -6- WK1230 OEM Installation Manual figure 2 WK1230 DVB Bottom 3.1.WK1230 1. WK1230 specifications Size: 17mm*26mm Working voltage： 5V+/-0.3V and 3V+/-0.15V Antenna: board antenna and external pull antenna Interface: 8 pin Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -7- WK1230 OEM Installation Manual figure 3&4 WK1230 Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -8- WK1230 OEM Installation Manual table 2.2.1 pin and description PIN Signal Name Description TXD UART TXD RXD UART RXD VCC Analog 5V supply GND Ground PWM1 Dim PWM2 PWM3 Green PWM4 Blue Dim Dim Warm White Mix Dim Cold Red 3.2.WK1230 Kit connection Through a jumper in DVB J4 slot (note printing consistent USB line to provide cap to choose the 5V as the WK1230 module power the direction of the module and the bottom screen to avoid module reverse connection), through the 5V power for DVB.As figure 4.3.1 Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 -9- WK1230 OEM Installation Manual Figure 5 WK1230 Kit 4. Wukoon App Operation 4.1.Wukoon Apk System requirements and installation 1. Mobile phone Android system more than 4.0. 2. Download the latest APK and install to the phone.( www.wukoon.com/download) Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 10 - WK1230 OEM Installation Manual 4.2.Wukoon Apk configuration equipment 4.2.1. Color and mode switch figure 6 WK1230 LED color and mode switch 1、If LED is yellow（red and green）： Now is power mode, WK1230 is connected to the router and is not controllable. After 9s~20s the color switch to another mode; 2、If LED is green: Now is Smartlink mode， App functionality can via mobile phone Smartlink or wechat configuration device features to configure the device to connect to the user router. If the mobile phone app configuration WK1230 Smartlink the device will restart after receive configuration data and LED bright yellow (red + green). Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 11 - WK1230 OEM Installation Manual The router can be connected after 9s about. 3、If LED is violet（red and blue） ： Now is Station mode and WK1230 has been connected to the router. In the same LAN, app can be refreshed through mobile phone to find the device and control the state of the device LED 4.2.2. App configuration Open app into the main interface, as shown in Figure 3.2.1. The pop-up prompted the reminder dialog after 10s. such as figure 3.2.2. figure 3.2.1 app main interface figure 3.2.2 reminder dialog After clicking on the OK button, enter the configuration of the new device interface (1), as shown in Figure 3.2.3. The latter chose to cancel the button, through the menu select Configure new device into the configuration of the new device interface (1), such as figure 3.2.8. Click next to configure the new device interface (2), as shown in Figure 3.2.4. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 12 - WK1230 OEM Installation Manual figure 3.2.3 configuration（1） figure 3.2.4 configuration（2） After entering the WI-FI password (if no password, no input), you click next into the configuration of new devices (3), such as figure 3.2.5. After clicking the start button, you start configuring new devices, such as figure 3.2.6. figure 3.2.5 configuration（3） figure 3.2.6 configuration（4） There are devices connected to the WI-FI hotspot successfully, showing how many devices currently have been configured to the router. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 13 - WK1230 OEM Installation Manual such as figure 3.2.7. Click the exit button, return to the main interface and configure the new device to complete. figure 3.2.7 configuration（5） figure 3.2.8 menu 4.3.Control equipment After the configuration of the new equipment and enter the main interface, you can control the device, such as figure 3.3.1. 4.3.1. Search and refresh device Open APP and search for connected WI-FI hotspot equipment. Click the upper left corner of the icon to go into the left menu, such as figure 3.3.1. Click the left bottom to refresh button. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 14 - WK1230 OEM Installation Manual figure 3.3.1 control equipment figure 3.3.2 search equipment 4.3.2. Select equipment Open the left menu and click on the device list item then select the appropriate device, as shown in Figure 3.3.3. figure 3.3.3 select equipment figure 3.3.4 control a group equipment Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 15 - WK1230 OEM Installation Manual 4.3.2.1. 4.3.2.2. Control a group equipment Control all equipment Open the left list and click on all the lights then entering the main interface to the current list. as shown in figure 3.3.4. 4.3.2.3. Control a group equipment First, open the right menu, click Group . In figure 3.3.4, go into the packet interface, there is a default grouping "all lights" in the packet interface, which contains all the devices. Second, click the Add button on the top right corner. Pop up "create a new group name dialog," as shown in Figure 3.5.3, after entering a new group name, in the group list. figure 3.3.5 select group figure3.3.6 create new group Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 16 - WK1230 OEM Installation Manual Then, click the group name right button to enter the group edit page, as shown in figure 3.3.7. Click the button to add the device to the group, if the button appears, it adds success. Click the button to enter the default interface, as shown in figure 3.3.8. (If you don't want to do this, you can skip this step). figure 3.3.7Packet editing interface figure 3.3.8 Default interface After setting the preset value, point the return key to return the graph 3.3.7 grouping edit interface and the grouping interface, as shown in figure 3.3.9. Click the group name and enter the main interface to control a group, such as figure 3.3.10. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 17 - WK1230 OEM Installation Manual figure 3.3.9 group interface figure 3.3.10 group control 4.4. APP other functions 4.4.1. APP upgrade In the mobile phone network, starting APP, if the server has a new version, it will pop up software update dialog, such as figure 3.4.1. After clicking on the update, you can complete the software version update by boot operation. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 18 - WK1230 OEM Installation Manual figure 3.4.1 APP upgrade list figure 3.4.2 reconstruction equipment 4.4.2. Reconstruction equipment To open the right menu, click on the list of reconstruction devices, such as figure 3.4.2, left device list empty. 4.4.3. Equipment upgrade Phone in the network, choose to upgrade equipment and click the update button from the main screen to enter the properties of the interface, as shown in Figure 3.4.3; below the button to display the "equipment can be upgraded to XXX" model of written characters to click, as shown in figure 3.4.4. Equipment upgrade, as shown in Figure 3.4.5. Equipment upgrade process, as shown in figure 3.4.6. Equipment upgrades successfully in Figure 3.4.7. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 19 - WK1230 OEM Installation Manual Figure 3.4.3 click the update button figure3.4.4 equipment upgrade XXX figure 3.4.5 equipment connect figure3.4.6 equipment upgrading Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 20 - WK1230 OEM Installation Manual figure 3.4.7 upgrade successfully 4.5. Questions Question 1: Tips Box disappears, how to enter the configuration of the new device page? A: Click APP right corner icon, open the right menu, as shown in figure 3.2.8. To configure the new device, enter the configuration of the new device page, as shown in Figure 3.2.3. Question two: click the "warm tip" button or click the right menu "configure the new device", the emergence of a WI-FI hot spot, tips, how should do? A: enter the phone configuration interface to connect to specify the WI-FI hotspot, according to the problem a solution to enter the configuration of the new device page. Question three: click on the configuration of the new device, has been shown is connected equipment, please wait, what should I do? A: please check the 3.2.1 of the document, check the mode and switch to the device. If the module is green, but App is still showing the tip, then check the router is supported UDP transmission. Question four: app smart connection equipment, equipment color from the green becomes yellow turn back to green, how should do? Answer: equipment from green into yellow that app configuration information has been received, by yellow to Green said equipment connected to the router failed, please check the configuration of the password is correct or router if it can be connected. Shenzhen Longysys Electronics Co.,Ltd www.Longsys.com 8/F, 1 Building. Finance Base, NO.8, KeFa Road, Shenzhen, China Tel: 86-755-86168848 10/F, CHINA AEROSPACE CENTRE,143 HOI BUN ROAD,HK Tel: 852-23850111 - 21 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : win7 Title : WK1230 Kit Demo 用户手册 Create Date : 2015:06:24 10:37:52Z Creator Tool : WPS Office Modify Date : 2015:06:25 15:05:49+08:00 Metadata Date : 2015:06:25 15:05:49+08:00 Document ID : uuid:653d2303-bd07-4feb-8406-41098413cd5e Instance ID : uuid:e5fcd1fd-6437-40b1-bf93-ac4bacc51f66 Page Count : 21 Author : win7EXIF Metadata provided by EXIF.tools