LPS Device NEO-4005LS LCD TV & MONITOR User Manual USERS MANUAL 3

Download:
Mirror Download [FCC.gov]
Document ID	574510
Application ID	j3QM8RDsZ7WiOTDvvZDYdg==
Document Description	USERS MANUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.5kB (1293811 bits)
Date Submitted	2005-08-24 00:00:00
Date Available	2005-08-24 00:00:00
Creation Date	2005-07-14 11:28:58
Producing Software	Acrobat Distiller 5.002000-11-08:00wk for Macintosh
Document Lastmod	2005-08-24 20:16:49
Document Title	USERS MANUAL 3
Document Creator	QuarkXPress3.3K: LaserWriter 8 KH-8.7.1
Document Author:	0

NEOVIA 40
LCD TV OWNER S INSTRUCTION
IMAGE ADJUSTMENT
ENGLISH
Press the MENU button.
Press left cursor to select “IMG.ADJ”.
Press down cursor to select functions within
“IMG.ADJ” MENU.
Press right / left cursor to change the settings.
Press MENU or ENTER to save.
Press MENU to escape OSD.
ACCESS IMG.ADJ.
Adjust the chosen function.
Press ENTER to Save.
Press EXIT to turn the OSD Off.
This is the general image adjustment layout
which can be seen when selecting “IMAGE
ADJUSTMENT” in the on screen display
(OSD).
Here the adjustment can be made to the displays horizontal and vertical position and image size if the display
seems not in correct position.
Image Size
FILL ALL mode
will display the picture at
its maximum size but with
slight elongation
ASPECT RATIO mode
the display is streched
vertically.
NORMAL mode
display is set at original
4:3
ZOOM mode
magnifies the central
section of the picture
WIDE mode
The display is stretched at
the edges.
H Position / V Position
To alter the picture position vertically and/or horizontally.
AUTO
Only valid in the Analog RGB mode to AUTO set Picture position.
Freeze Frame
To temporarly freeze current viewing picture (prolong freeze can permamently burned to the LCD panel hence
it is not recommended for long period of time).
22
40 LCD TV OWNER S INSTRUCTION
NEOVIA
SET UP
ENGLISH
Press the MENU button.
Press left cursor to select “SET UP”.
Press down cursor to select functions within
“SETUP” MENU.
Press right / left cursor to change the settings.
Press MENU or ENTER to save.
Press MENU to escape OSD.
ACCESS SETUP.
Adjust the chosen function.
Press ENTER to save.
Press EXIT to turn the OSD Off.
This is the general “SETUP” layout which
can be seen when selecting “SETUP” in the
on screen display (OSD).
LANGUAGE:
Various OSD Language setting has been provided for ease of use.
ENGLISH FRENCH GERMAN ITALIAN PORTUGUESE
Hot key provided in the remote control for quick and convenient setting.
SPANISH
DUTCH
OSD
TRANSPARENCY: To change the black background level.
TIMEOUT: The time when OSD display to turn itself off when not been pressed for selected period of
time.
CLOCK
TIME : Displays current time when set.
TIME ON : The time when TV to turn itself on.
TIME OFF : The time when TV to turn itself off.
CHANNEL : The channel that the TV to turn itself on.
VOLUME : The level of the speaker sound when the TV turns on.
SLEEP TIME : Timer setting for when the display to be turned off.
The timer can be set for every 10 minutes interval for up to 180 minutes.
(Hot key is provided in the remote control for quick and convenient setting.)
RESET
Returns OSD setting to factory default setting.
23
NEOVIA 40
LCD TV OWNER S INSTRUCTION
AUDIO SETTING
ENGLISH
Press the MENU button.
Press left cursor to select “AUDIO”
Press down cursor to select functions within
“AUDIO” menu
Press right / left cursor to change the settings.
Press MENU or ENTER to save.
Press MENU to escape OSD.
ACCESS AUDIO.
Adjust the chosen function.
Press ENTER to save.
Press EXIT to turn the OSD Off.
This is the general “AUDIO” layout which can
be seen when selecting “AUDIO” in the on
screen display (OSD).
SOUND
MODE
Preset equalizer values, Normal
Music
News
Movie
User.
BALANCE
This is to change the sound output level for left and right.
EQUALIZER
This has been provided to alter the output sound by the user when set as “USER ” in mode setting .
HEAD PHONE
Balance : This is to change the sound output level for left and right.
Volume : To change the sound output level.
Treble : Change the level of the sound output level around 10KHz frequency area.
Bass : Change the level of the sound output around 100hertz frequency area.
STEREO
Output sound modes stereo Mono, Bilingual Dual A
Bilingual, Dual A and Dual B works if station sends it.
Dual B
SURROUND (Option)
To enable or disable sound to boost and perform process to make the “surround like sound” for clear and
fidelity sound.
AUDIO
To change the sound output from primary to secondary when in PIP or PBP mode.
24
40 LCD TV OWNER S INSTRUCTION
NEOVIA
FAQ / TROUBLESHOOTING
Symptoms that may appear to be a problem
The following symptoms may happen even if the TV has no problem. First try the following list of possible
problems and solutions before contacting a service center. First try the following list of possible problems and
solutions. If the symptom continues, turn the TV off, and call your nearest service center.
Symptom
Possible Problem
Possible Solution
No picture on the screen, Power connection problem.
and the power LED does
not turn on.
Check the power cable connectivity to the
power connector. Press the power switch
again.
The TV is turned on, but The brightness is adjusted too low.
there is no picture on the The fluorescent tube is out of order.
screen.
Adjust the brightness and the contrast so that
a picture is displayed brightly. The fluorescent
tube of a LCD TV has a lifetime of about
50,000 hours.
To replace the fluorescent tube, contact a
service center.
An afterimage is gen- This is caused by an inherent property of LCD panels.
erated when continuously Depending on the number of valid pixels, there may be black or bright pixels.
watching a still image.
These will be less than 0.005% of the sum of all pixels. This is not a problem.
No picture is displayed on Discordance between the external device Adjust the input switch location.
the screen, but there is no jack and the input switch button location.
audio
A picture is displayed on The volume is adjusted to 0.
the screen, but there no Mute is active.
audio.
The audio cable is disconnected.
Turn up the Volume button.
Press the Mute button again.
Check the audio cable connectivity.
Remote control malfunc- The polarity of the batteries installed in the Reinstall the batteries properly.
tions.
remote control is wrong.
Replace the batteries with new ones.
The batteries installed in the remote
control have not been discharged
completely.
Noise is heard on the This may happen when you use a radio Noise may occur when you use a radio near
radio.
near the TV.
the TV.
Keep some distance between any radios and
the LCD TV.
No color in a color picture
The Color density is adjusted to 0 or Adjust the Color density to 100 or less.
almost 0. tune.
25
ENGLISH
If the TV seems to have a problem, first try the following list of possible problems and solutions before
contacting a service center. If none of these troubleshooting tips apply, do not attempt to repair the product
yourself. Call your nearest service center.
NEOVIA 40
ENGLISH
Symptom
LCD TV OWNER S INSTRUCTION
Possible Problem
Duplicated pictures on the This may be caused by reflected
screen.
broadcasting signals when there is are
mountains, buildings, or trees near your
house.
Blurred or snowy picture.
Possible Solution
Check if there are any tall objects such as skys
crapers near your house.
Check that the direction of the antenna is
adjusted correctly.
The direction of the antenna is not optimal. Check that the direction of the antenna is
The antenna cable is disconnected.
correct.
Check that the antenna cable is connected to
the ANTENNA jack on the back of the LCD
TV.
A “No input signal” The Signal connection is incorrect.
message appears.
Check that the computer is turned on.
Check the display cable connectivity.
Check the supported input signal
specifications.
The input signal is not supported by the Check the supported input signal
LCD TV.
specifications.
Check the display cable specifications.
The entire screen flickers.
This product has been optimally set to watch
TV channels in the factory. There may be
flickering when you watch still images from a
PC. This is not a problem of the product.
The remote control does not work properly!
Are the polarities of the installed batteries correct?
Has the battery discharged completely?
Is the power cord plugged in properly or is there a power failure?
Is fluorescent lighting or a neon sign near the unit?
Warning
If a problem has been detected, unplug the power cable from the wall outlet first.
Using the product when it has a fault may cause electric shocks or fire.
Do not place objects near the wall outlet so that you can unplug the power cable if necessary.
26
40 LCD TV OWNER S INSTRUCTION
NEOVIA
SPECIFICATIONS
Model
NEO400LS
Screen Size
40 inch wide
Viewable Screen
885.160(H) X 497.664(V)
Pixel Area
0.648(H) X 0.216(W)
Type
a-si TFT activ matrix
Viewing Angle
Up/Down : 170degrees, Left/Right : 170degrees
Display Color
8bit, 16.7M
MAX Resolution
1366 X 768
Contrast Ratio
1,000 : 1
Luminance / AVR
500 cd/
Panel Interface
LVDS
Coating
Hard coating(3H) & Anti-glare treatment of the front polarizer
Back Light
U-type CCFL (Cold Cathode Fluorescent Lamp)
Receiver/Channels
VHF: Channel E2 ~ Channel E12
LCD Panel
UHF: Channel E21 ~ Channel E69
CATV: Channel S1 ~ Channel S41
TV/VIDEO
Television Broadcasting System: PAL, SECAM: B/G, D/K, I, L, L’
Antenna Interface
VHF, UHF: 75ohm
Video Signal
PAL, SECAM
Synchronization
Horizontal F
30 ~ 60KHz
Vertical F
60Hz
Color Quality
16,772,216 colors
Maximum Resolution
VESA 1360 X 768 @ 60Hz
Display Color
8-bit, 16.7M
Interface
D-sub / DVI
PC
27
ENGLISH
The exterior design and the product specifications are subject to be changed without prior notice due to
improvements in performance. This product is manufactured for domestic use. This product may not be used in
countries whose television system type or power voltage is different.
NEOVIA 40
LCD TV OWNER S INSTRUCTION
ENGLISH
Model
INPUT
NEO400LS
RF
BNC
VIDEO1
SCART1
VIDEO2
SCART2
VIDEO Ext.
RCA
HDMI
HDMI
S-VIDEO
Mini-DIN
DVI
DVI
PC RGB
Analog RGB, Separate H / V
HD1 / HD2
480i/480p 60Hz, 576i/576p 50Hz, 720p 50Hz/60Hz, 1080i 50Hz/60Hz
PC AUDIO
Stereo
POWER SUPPLY
AC 100 ~ 240V, 50 / 60Hz
VIDEO
RCA
AUDIO L/R for VIDEO
RCA
S/P DIF
Option
HEADPHONE
Stereo
OUTPUT
SPEAKER
10W X 2 / 10W X 2 (Tweeter) : RMS
Power Consumption
Maximum 300W
Power Consumption with Power Saving
Less than < 10W
Input Voltage
AC 100 ~ 240V ~ , 50 / 60Hz
Monitor + Stand
1051 X 794 X 300
Monitor Alone
1051 X 742 X 116
Dimension
Weight
45Kg
Accessories
Remote control, Battery (AAA) X 2, Owner’s Instruction, Power Cord,
SCART Cable
* This devices has been registered in regards to EMI for residential use. It may be used in all areas.
28
Pour toute question, n’hesitez pas a contracter la HOTLINE :
In case of any question, do not hesitate to contact the HOTLINE:
France / France
Italie / Italy
Royaume-Uni / UK
Belgique / Belgium
Luxembourg / Luxemburg
Hollande / Netherland
Suisse / Switzerland
Espagne / Spain
Portugal / Portugal
: 0 892 02 17 56
: 0296 172 240
: 08 70 60 91 564
: 064 237 181
: 00 32 64 237 181
: 00 32 64 237 181
: 0844 810 110
: 902 100 424
: 229 408 962
40 LCD TV
OWNER S INSTRUCTION

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:07:14 11:28:58+09:00
Modify Date                     : 2005:08:24 20:16:49+09:00
Page Count                      : 9
Creation Date                   : 2005:07:14 11:28:58+09:00
Mod Date                        : 2005:08:24 20:16:49+09:00
Author                          : 0
Producer                        : Acrobat Distiller 5.002000-11-08:00wk for Macintosh
Metadata Date                   : 2005:08:24 20:16:49+09:00
Creator                         : 0
Title                           : 
Has XFA                         : No

EXIF Metadata provided by EXIF.tools