Laird Connectivity PKLR2400 User Manual FCCWARN3
AeroComm Corporation FCCWARN3
Contents
revised FCC Warning per correspondence 11176
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 79323 |
| Application ID | WeoljL8PGPSD7a4nfldXog== |
| Document Description | revised FCC Warning per correspondence 11176 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 0.81kB (10079 bits) |
| Date Submitted | 2000-01-04 00:00:00 |
| Date Available | 2000-01-28 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Acrobat PDFWriter 3.02 for Windows |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | FCCWARN3.PDF |
| Document Creator | Microsoft Word |
| Document Author: | Unknown |
Copyright Information/FCC User’s Notice Copyright Information Copyright © 1999 AEROCOMM, Inc. All rights reserved. The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by AEROCOMM, Inc. AEROCOMM, Inc. reserves the right to make periodic modifications of this product without obligation to notify any person or entity of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product without the prior consent of an authorized representative of AEROCOMM, Inc. is prohibited. All brands and product names in this publication are registered trademarks or trademarks of their respective holders. FCC NOTICE WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. ANTENNA WARNING WARNING: This device has been tested with an MMCX connector with the antennas listed below. For the purpose of FCC RF Exposure Compliance, the Original Equipment Manufacturer (OEM) must ensure professional installation of Antennas 2, 3, 4, 6 and 7 by signing the PROFESSIONAL ANTENNA INSTALLATION AGREEEMENT. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. Mfr Model Freq Gain Type Connector Dimensions Installation Centurion WXE2400 2.4-2.5 2dBi Omni MMCX <2.25" Integrated Maxrad MFB24008 2.4-2.5 8dBi Omni N-F 17" Maxrad BMMG24000MMCX6' 2.4-2.5 unity Omni-mobile MMCX 1.75" Maxrad BMMG24000RPSMA12' 2.4-2.5 5dBi Omni-mobile R-SMA-M 9" AeroComm NZH2400 2.4-2.5 1dBi Omni Integrated 1"x0.3" Professional 20cm min Professional 20cm min Professional 20cm min Integrated Maxrad MP24013FC 2.4-2.5 13dBi Panel TNC-F 8.7x7.9x1.1 Maxrad MUF24005 2.4-2.5 5dBi Omni-Mobile R-SMA-M 8.75" Centurion WXR2400SMRP 2.4-2.5 2dBi Omni R-SMA-M <2.25" Professional 20cm min Professional 20cm min User LABELING REQUIREMENTS WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the AeroComm FCC identifier for this product as well as the FCC Notice above. RF EXPOSURE WARNING: For the purpose of FCC RF Exposure Compliance, the Original Equipment Manufacturer (OEM) must ensure that Antennas 2, 3, 4, 6 and 7 in the previous table are professionally installed and that a minimum of 20cm spacing between the user and antenna is required. The OEM is required to sign the by signing the PROFESSIONAL ANTENNA INSTALLATION AGREEEMENT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 2 Creator : Microsoft Word Create Date : Tuesday, January 04, 2000 12:14:22 PM Title : FCCWARN3.PDF Author : Unknown Producer : Acrobat PDFWriter 3.02 for Windows Subject :EXIF Metadata provided by EXIF.tools