Laird Connectivity PKLR2400 User Manual FCCWARN3

AeroComm Corporation FCCWARN3

UserManual.wiki >

Laird Connectivity >

PKLR2400 User Manual >

revised FCC Warning per correspondence 11176

Contents

1. Exhibit 8 subsection 6 Diagram of proprietary MMCX antenna connector
2. Exhibit 14 AeroComm PKLR2400 Radio Users Manual
3. Revised users manual
4. revised FCC Warning per correspondence 11176
5. FCC RF Exposure Warning ref to correspondence 11623

revised FCC Warning per correspondence 11176

Copyright Information/FCC User’s NoticeCopyright Copyright © 1999 AEROCOMM, Inc. All rights reserved.Information The information contained in this manual and the accompanyingsoftware programs are copyrighted and all rights are reserved byAEROCOMM, Inc. AEROCOMM, Inc. reserves the right to makeperiodic modifications of this product without obligation to notifyany person or entity of such revision. Copying, duplicating, selling,or otherwise distributing any part of this product without the priorconsent of an authorized representative of AEROCOMM, Inc. isprohibited.All brands and product names in this publication are registeredtrademarks or trademarks of their respective holders.FCC NOTICE ANTENNA WARNINGMfr Model Freq Gain Type Connector Dimensions Installation1Centurion WXE2400 2.4-2.5 2dBi Omni MMCX <2.25" Integrated2Maxrad MFB24008 2.4-2.5 8dBi Omni N-F 17" Professional20cm min3Maxrad BMMG24000MMCX6' 2.4-2.5 unity Omni-mobile MMCX 1.75" Professional20cm min4Maxrad BMMG24000RPSMA12' 2.4-2.5 5dBi Omni-mobile R-SMA-M 9" Professional20cm min5AeroComm NZH2400 2.4-2.5 1dBi Omni Integrated 1"x0.3" Integrated6Maxrad MP24013FC 2.4-2.5 13dBi Panel TNC-F 8.7x7.9x1.1 Professional20cm min7Maxrad MUF24005 2.4-2.5 5dBi Omni-Mobile R-SMA-M 8.75" Professional20cm min8Centurion WXR2400SMRP 2.4-2.5 2dBi Omni R-SMA-M <2.25" User WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation. WARNING: This device has been tested with an MMCX connector with the antennas listed below.For the purpose of FCC RF Exposure Compliance, the Original Equipment Manufacturer(OEM) must ensure professional installation of Antennas 2, 3, 4, 6 and 7 by signing thePROFESSIONAL ANTENNA INSTALLATION AGREEEMENT. Any antenna not in thefollowing table must be tested to comply with FCC Section 15.203 for unique antennaconnectors and Section 15.247 for emissions.

LABELING REQUIREMENTSRF EXPOSURE WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labelingrequirements are met. This includes a clearly visible label on the outside of the OEMenclosure specifying the AeroComm FCC identifier for this product as well as the FCCNotice above. WARNING: For the purpose of FCC RF Exposure Compliance, the Original EquipmentManufacturer (OEM) must ensure that Antennas 2, 3, 4, 6 and 7 in the previous tableare professionally installed and that a minimum of 20cm spacing between the user andantenna is required. The OEM is required to sign the by signing the PROFESSIONALANTENNA INSTALLATION AGREEEMENT.