Laird Connectivity PKLR2400 User Manual FCCWARN1

AeroComm Corporation FCCWARN1

UserManual.wiki >

Laird Connectivity >

PKLR2400 User Manual >

FCC RF Exposure Warning ref to correspondence 11623

Contents

1. Exhibit 8 subsection 6 Diagram of proprietary MMCX antenna connector
2. Exhibit 14 AeroComm PKLR2400 Radio Users Manual
3. Revised users manual
4. revised FCC Warning per correspondence 11176
5. FCC RF Exposure Warning ref to correspondence 11623

FCC RF Exposure Warning ref to correspondence 11623

Copyright Information/FCC User’s NoticeCopyright Copyright © 1999 AEROCOMM, Inc. All rights reserved.Information The information contained in this manual and the accompanyingsoftware programs are copyrighted and all rights are reserved byAEROCOMM, Inc. AEROCOMM, Inc. reserves the right to makeperiodic modifications of this product without obligation to notifyany person or entity of such revision. Copying, duplicating, selling,or otherwise distributing any part of this product without the priorconsent of an authorized representative of AEROCOMM, Inc. isprohibited.All brands and product names in this publication are registeredtrademarks or trademarks of their respective holders.FCC NOTICE ANTENNA WARNINGMfr Model Freq Gain Type Connector Dimensions1Centurion WXE2400 2.4-2.5 2dBi Omni MMCX <2.25"2Maxrad MFB24008RPN 2.4-2.5 8dBi Omni R-N-F 17"3Maxrad BMMG24000MSMARP12' 2.4-2.5 unity Omni-mobile R-SMA-M 1.75"4Maxrad BMMG24005MSMARP12' 2.4-2.5 5dBi Omni-mobile R-SMA-M 9"5AeroComm NZH2400 2.4-2.5 1dBi Omni Integrated 1"x0.3"6Maxrad MP24013TMSMARP12 2.4-2.5 13dBi Panel R-SMA-M 8.7x7.9x1.17Maxrad MUF24005M174MSMARP12 2.4-2.5 5dBi Omni-Mobile R-SMA-M 8.75"8Centurion WXR2400SMRP 2.4-2.5 2dBi Omni R-SMA-M <2.25"NOTE: R-XX IMPLIES A REVERSE POLARITY CONNECTOR WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation. WARNING: This device has been tested with an MMCX connector with the antennas listed below.Any antenna not in the following table must be tested to comply with FCC Section 15.203for unique antenna connectors and Section 15.247 for emissions.

LABELING REQUIREMENTSRF EXPOSURE WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labelingrequirements are met. This includes a clearly visible label on the outside of the OEMenclosure specifying the AeroComm FCC identifier , KQL-PKLR2400, for this productas well as the FCC Notice above. WARNING TO OEMS: To comply with FCC RF Exposure requirements, the Original EquipmentManufacturer (OEM) must ensure that Antennas 2, 3, 4, 6 and 7 in the previous tablemust be installed and/or configured to operate with a separation distance of 20cm ormore from all persons to satisfy RF Exposure compliance.The preceding statement must be included as a CAUTION statement inmanuals for products operating with Antennas 2, 3, 4, 6 and 7 in the previoustable to alert users on FCC RF Exposure compliance.