Landis Gyr Technologies AIRPT652 RF Module for Utility Meter User Manual 2

Landis+Gyr Technologies, LLC RF Module for Utility Meter Users Manual 2

Contents

Users Manual 2

.Hunt
Technologies, Inc.
6436 County Rd. 11
Pequot Lakes, MN 56472
218.562.4877 800.828.4055
Fax 218.562.4878
www.hunttechnologies.com
Tuesday, March28,2006
Terry Gaston
Sensus MeteringSystems
Terry Gastouniotis
44 Castilian Drive
Goleta, CA 93117
The ModelAirPointiConis installed inyour Sensus iCon ElectricMetersas originalequipment. We do
not supply a manual withthis unit but we request that the followingrequired statements be placed inthe
Sensus iConmanualto meetthe requirementsofthe FederalCommunicationsCommissionCFR47,Part
15, and IndustryCanada RSS-210.
"This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) This device may not cause harmfulinterference, and, 2) This device must accept
any interference received including interference that may cause undesired operation.
This device contains FCC ID:TEB-AIRPT652 IIC: 5931A-AIRPT652.
CAUTION TO USER: Changes or modifications not expressly approved by Hunt Technologies,
Inc. could void the user's authority to operate the equipment."
Sincerely,
J-fJO~
Dave Olson
Directorof Engineering
Tele: (218) 562-5547
Fax: (218) 562-4878
daveo@hunttechnologies.com
6436 County Rd. 11
Pequot Lakes, MN 56472
218.562.4877 800.828.4055
Fax 218.562.4878
www.hunttechnologies.com
Tuesday, March 28, 2006
TOV America Inc. FCB
10040 Mesa Rim Road
San Diego CA 92121 USA
Dear Sir or Madam:
We, Hunt Technologies, 6436 County Road 11, Pequot Lakes, MN 56472, are requesting Limited
Modular Approval (LMA) on the AirPoint iCon (AirPoint transmitter board).The AirPoint iCon is installed in
the Sensus iCon electric meters. Sensus will control the final installation by requiring that the AirPoint
iCon be installed into the Sensus iCon meter per Hunt Technologies' specific instructions. Further, it will
not transmit RF energy unless it is in a Sensus iCon meter due to the complexity of the communications
protocol used between the two.
No manual exists for this product since Sensus is the integrator. However, Sensus will be instructed to
include the following regulatory notices in their end product manuals:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device contains FCC ID: TEB-AIRPT652 / IC: 5931A-AIRPT652.
Caution: Changes or modifications not expressly approved by Hunt Technologies could void the
user's authority to operate the equipment.
In addition, the wording "Contains FCC ID: TEB-AIRPT652 / IC: 5931A-AIRPT652" will be included on the
label of the device in which the AirPoint iCon is installed.
Sincerely, ~v-JtJ~
Dave Olson
Director of Engineering
Tele: (218) 562-5547
Fax: (218) 562-4878
daveo@hunttechnologies.com

Navigation menu