Landis Gyr Technologies HUNTSS710 Multi-Utility Residential Endpoint User Manual PUBS 0710 0002

Landis+Gyr Technologies, LLC Multi-Utility Residential Endpoint PUBS 0710 0002

users manual statement

StatSignal PUBS-0710-0002 Rev A 1StatSignalMulti-Utility ResidentialEndpoint Data Sheet GeneralThe Cellnet+Hunt High-Powered Multi-Utility Residential endpoint is designed to accommodate American, Actaris/Schlumberger/Sprague and Invensys/Equimeter Gas meters for use in residential services. The High-Powered Multi-Utility Residential module receives rotational pulse data from the meter via 3rd party meter pulse kits and sends this information to a StatSignal electrical endpoint device utilizing RF transmission. The electrical endpoint forwards this information to Cell-net+Hunt’s Data Collector and Command Center where the data is converted to CCF usage.FCC Compliance InformationModel: FASY-0710-0003/0004FCCID: TEB-HUNTSS710IC: 5931A-HUNTSS710Figure 1 - 1.The Cellnet+HuntHigh-PoweredMulti-UtilityResidentialEndpoint Module.
StatSignal Multi-Utility Residential Endpoint Data Sheet Cellnet+Hunt2PUBS-0710-0002 Rev A StatSignalCompliance Statement (Part 15.19)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-ditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undes-ired operation.ETL Classified: Non-incendive Electrical Equipment for use in Class 1, Division 2, Hazardous (Classified) Locations:Endpoint LocationTo comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.Endpoint UsageThe StatSignal Multi-Utility Residential endpoint will be used:• For residential metering applications.•At homes.The HighPowered Multi-Utility Residential endpoint requires professional installation by qualified personnel.RF InterferenceThis equipment has been tested and found to comply with the limits for a Class B digital device, pur-suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try and correct the interference by one or more of the following measures:• Re-orient or relocate the receiving antenna.Changes or modifications not expressly approved by Cellnet+Hunt for compliance could void the user’s authority to operate the equipment.Warning-Explosion Hazard - Substitution of Components may impair suitability for Class1, Division 2, Group D.Avitir Quelqu’un-Exposion Hasard - Changement de Composants il se peut affaiblir qui est approprie por Categorie 1, Section 2, Regroupe D.
Cellnet+Hunt StatSignal Multi-Utility Residential Endpoint Data SheetStatSignal PUBS-0710-0002 Rev A 3• Increase the separation between the equipment and receiver.• Consult Cellnet+Hunt or an experienced radio/TC technician for help.SpecificationsTable 1. StatSignal Multi-Utility Residential Endpoint SpecificationsCategory Specification Value or RangeCompatible MetersAmerican Gas Meters Invensys/Equimeter Actaris/Schlumberger/SpragueDomestic meters, circular read and direct read indi-ces. For sizes 175 and 250CFH Models.Domestic meters, circular read R-275 index.Domestic meters, direct read and circular read indices.For sizes 240, 250 and 400 CFH Models.ElectricalVoltage 3.6 vdc Battery PoweredPower Transmit Sleep450mA +/- 15mA <10uA RFOutput Power +23 dBm +/- 2dBAdjacent Channel Power +50dBc NominalTransmit Frequency 910 to 928 MHz ISM unlicensed (FCC Part 15)Communication Protocol StatSignal RF MESH ProtocolReceive Sensitivity -108 dBm minimum (-110 dBm typical)StandardsComplianceFCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators)ANSI /IPC-A-610 Class 2 Workmanship for electronics assemblyETL Class 1 Div 2 Group DEnvironmentalGeneral Environmental Outdoor, rain-protected, sunlight-exposedOperating Temperature Range-40 to +85Humidity 0 to 95% relative humidity, non-condensingMechanical Size 4 5/8”W x 4 5/8”L x 1 7/8”H inches, typicalWeight 4.2 ounces (119.2g), typicalContact Information: Technical Support:1-888-390-5733Internet:www.cellnethunt.comFax1-218-562-5530E-mail:support@cellnethunt.com

Navigation menu