Landis Gyr Technologies HUNTSS710 Multi-Utility Residential Endpoint User Manual PUBS 0710 0002
Landis+Gyr Technologies, LLC Multi-Utility Residential Endpoint PUBS 0710 0002
users manual statement
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 907546 |
| Application ID | 91gk2OHmwhXNzIlUx9xfTw== |
| Document Description | users manual statement |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 80.93kB (1011569 bits) |
| Date Submitted | 2008-02-28 00:00:00 |
| Date Available | 2008-05-02 00:00:00 |
| Creation Date | 2004-01-27 13:02:55 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2008-02-19 11:21:26 |
| Document Title | PUBS-0710-0002.fm |
| Document Creator | FrameMaker 7.1 |
| Document Author: | kims |
StatSignal Multi-Utility Residential Endpoint Data Sheet General The Cellnet+Hunt High-Powered Multi-Utility Residential endpoint is designed to accommodate American, Actaris/Schlumberger/Sprague and Invensys/Equimeter Gas meters for use in residential services. The High-Powered Multi-Utility Residential module receives rotational pulse data from the meter via 3rd party meter pulse kits and sends this information to a StatSignal electrical endpoint device utilizing RF transmission. The electrical endpoint forwards this information to Cellnet+Hunt’s Data Collector and Command Center where the data is converted to CCF usage. Figure 1 - 1. The Cellnet+Hunt High-Powered Multi-Utility Residential Endpoint Module. FCC Compliance Information Model: FASY-0710-0003/0004 FCCID: TEB-HUNTSS710 IC: 5931A-HUNTSS710 StatSignal PUBS-0710-0002 Rev A StatSignal Multi-Utility Residential Endpoint Data Sheet Cellnet+Hunt Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Cellnet+Hunt for compliance could void the user’s authority to operate the equipment. ETL Classified: Non-incendive Electrical Equipment for use in Class 1, Division 2, Hazardous (Classified) Locations: Warning-Explosion Hazard - Substitution of Components may impair suitability for Class1, Division 2, Group D. Avitir Quelqu’un-Exposion Hasard - Changement de Composants il se peut affaiblir qui est approprie por Categorie 1, Section 2, Regroupe D. Endpoint Location To comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Endpoint Usage The StatSignal Multi-Utility Residential endpoint will be used: • For residential metering applications. • At homes. The HighPowered Multi-Utility Residential endpoint requires professional installation by qualified personnel. RF Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try and correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. PUBS-0710-0002 Rev A StatSignal Cellnet+Hunt StatSignal Multi-Utility Residential Endpoint Data Sheet • Increase the separation between the equipment and receiver. • Consult Cellnet+Hunt or an experienced radio/TC technician for help. Specifications Table 1. StatSignal Multi-Utility Residential Endpoint Specifications Category Compatible Meters Specification Value or Range American Gas Meters Invensys/Equimeter Actaris/Schlumberger/Sprague Domestic meters, circular read and direct read indices. For sizes 175 and 250CFH Models. Domestic meters, circular read R-275 index. Domestic meters, direct read and circular read indices. For sizes 240, 250 and 400 CFH Models. Voltage Electrical 3.6 vdc Battery Powered Transmit Power Sleep 450mA +/- 15mA RF Standards Compliance Environmental Mechanical Contact Information: StatSignal <10uA Output Power +23 dBm +/- 2dB Adjacent Channel Power +50dBc Nominal Transmit Frequency 910 to 928 MHz ISM unlicensed (FCC Part 15) Communication Protocol StatSignal RF MESH Protocol Receive Sensitivity -108 dBm minimum (-110 dBm typical) FCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators) ANSI /IPC-A-610 Class 2 Workmanship for electronics assembly ETL Class 1 Div 2 Group D General Environmental Outdoor, rain-protected, sunlight-exposed Operating Temperature Range -40 to +85 Humidity 0 to 95% relative humidity, non-condensing Size 4 5/8”W x 4 5/8”L x 1 7/8”H inches, typical Weight 4.2 ounces (119.2g), typical Technical Support: Internet: Fax 1-888-390-5733 www.cellnethunt.com 1-218-562-5530 support@cellnethunt.com PUBS-0710-0002 Rev A E-mail:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Mode : UseNone XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : FrameMaker 7.1 Modify Date : 2008:02:19 11:21:26Z Create Date : 2004:01:27 13:02:55Z Format : application/pdf Title : PUBS-0710-0002.fm Creator : kims Document ID : uuid:0cd055fc-ff06-4301-b9df-9802aa4d63db Instance ID : uuid:1305fcd6-56d8-483a-aca0-24f5bc220829 Page Count : 4 Author : kimsEXIF Metadata provided by EXIF.tools