Landis Gyr Technologies HUNTSS762 Transmitter for Watt-Hour Meter User Manual Ship Sheet

Landis+Gyr Technologies, LLC Transmitter for Watt-Hour Meter Ship Sheet

Contents

Ship Sheet

Data Sheet PUBS-0762-0001 Rev A 1FOCUS Universal RFEndpoint Data SheetGeneralThe Cellnet+Hunt FOCUS Universal RF endpoint is designed to accommodate Landis+Gyr FOCUS meters for use in residential and light industrial services. The FOCUS Universal RF module directly reads kWh usage data from the meter register and sends this information to a data collection device utilizing RF transmission. The collector forwards this information to Cellnet+Hunts’ Command Center software.Figure 1. The Cellnet+Hunt FOCUS Universal RF Endpoint Module andLandis+Gyr FOCUS MeterFCC Compliance InformationModel: FASY-0762FCCID: TEB-HUNTSS762IC: 5931A-HUNTSS762
FOCUS Universal RF Endpoint Data Sheet Cellnet+Hunt2 PUBS-0762-0001 Rev A Data SheetCompliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Endpoint LocationTo comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.Endpoint UsageThe FOCUS Universal RF endpoint will be used:• for residential and commercial metering applications.• at homes and businesses.The FOCUS Universal RF endpoint requires professional installation by qualified personnel.RF InterferenceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Consult Cellnet+Hunt or an experienced radio/TC technician for help.Changes or modifications not expressly approved by Cellnet+Hunt for compliance could void the user’s authority to operate the equipment.
Cellnet+Hunt FOCUS Universal RF Endpoint Data SheetData Sheet PUBS-0762-0001 Rev A 3SpecificationsTable 1. FOCUS Universal RF Endpoint SpecificationsCategory Specification Value or RangeCompatible MetersMeter Type Landis+Gyr FOCUS ALSupported Meter Forms120V FASY-0762-0001 240V FASY-0762-0002FormClassL+G Part Number FormClassL+G Part Number1S 100 EA0000T0-QQQQ*2S 200 EA1100T0-QQQQ*3S 20 EA0G00T0-QQQQ*2SE 320 EA1400T0-QQQQ*12S 200 EA01C0T0-QQQQ*2K 480 EA1600T0-QQQQ*25S 200 EA0A00T0-QQQQ*3S 20 EA0H00T0-QQQQ*4S 20 EA0J00T0-QQQQ*NOTE: The last four digits of the Landis+Gyr part number identify a specific customer feature set including custom name plate, programming and RKAs.ElectricalVoltage 120/240V (depending on meter form)Power Max: 2.2W (1.2W meter, 1W transceiver)Typical: 1.2W (.7W meter, .5W transceiver)RFOutput Power +26 dBm +/-2 dBmAdjacent Channel Power +50 dBc NominalTransmit Frequency 902 to 928 MHz ISM unlicensed (FCC Part 15)Communication Protocol Stat RF MESH ProtocolReceive Sensitivity -108 dBm minimumStandards ComplianceFCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators)IEC 61000 4-2,3,4,5,11,12 Electromagnetic CompatibilityANSI C12.19 Compatible with Utility Industry End Device TablesANSI C12.20 National Standard for Electricity Meters - 0.2 and 0.5 Accuracy ClassesANSI C12.21 Code for Electricity Metering ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) Tests
FOCUS Universal RF Endpoint Data Sheet Cellnet+Hunt4 PUBS-0762-0001 Rev A Data SheetEnvironmentalGeneral Environmental Outdoor, rain-protected, sunlight-exposedOperating Temperature Range-40 to +70 C (under meter glass)Humidity 0 to 95% relative humidity, non-condensingMechanical Size 4 H x 4.8125 W x 1.25 D inches, typicalWeight 5 ounces (142 g), typicalTable 1. FOCUS Universal RF Endpoint SpecificationsCategory Specification Value or RangeContact Information: Technical Support:1-888-390-5733Internet:www.cellnethunt.comFax1-218-562-5530E-mail:support@cellnethunt.com

Navigation menu