Landis Gyr Technologies HUNTSS762 Transmitter for Watt-Hour Meter User Manual Ship Sheet
Landis+Gyr Technologies, LLC Transmitter for Watt-Hour Meter Ship Sheet
Contents
- 1. No users manual letter
- 2. Ship Sheet
Ship Sheet
FOCUS Universal RF Endpoint Data Sheet General The Cellnet+Hunt FOCUS Universal RF endpoint is designed to accommodate Landis+Gyr FOCUS meters for use in residential and light industrial services. The FOCUS Universal RF module directly reads kWh usage data from the meter register and sends this information to a data collection device utilizing RF transmission. The collector forwards this information to Cellnet+Hunts’ Command Center software. Figure 1. The Cellnet+Hunt FOCUS Universal RF Endpoint Module and Landis+Gyr FOCUS Meter FCC Compliance Information Model: FASY-0762 FCCID: TEB-HUNTSS762 IC: 5931A-HUNTSS762 Data Sheet PUBS-0762-0001 Rev A FOCUS Universal RF Endpoint Data Sheet Cellnet+Hunt Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Cellnet+Hunt for compliance could void the user’s authority to operate the equipment. Endpoint Location To comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Endpoint Usage The FOCUS Universal RF endpoint will be used: • for residential and commercial metering applications. • at homes and businesses. The FOCUS Universal RF endpoint requires professional installation by qualified personnel. RF Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult Cellnet+Hunt or an experienced radio/TC technician for help. PUBS-0762-0001 Rev A Data Sheet Cellnet+Hunt FOCUS Universal RF Endpoint Data Sheet Specifications Table 1. FOCUS Universal RF Endpoint Specifications Category Specification Meter Type Value or Range Landis+Gyr FOCUS AL 120V FASY-0762-0001 Compatible Meters Supported Meter Forms For Clas 1S 100 3S 12S 25S 240V FASY-0762-0002 For Clas EA0000T0QQQQ* 2S 200 EA1100T0QQQQ* 20 EA0G00T0QQQQ* 2SE 320 EA1400T0QQQQ* 200 EA01C0T0QQQQ* 2K 480 EA1600T0QQQQ* 3S 20 EA0H00T0QQQQ* 4S 20 EA0J00T0-QQQQ* 200 L+G Part Number EA0A00T0QQQQ* L+G Part Number NOTE: The last four digits of the Landis+Gyr part number identify a specific customer feature set including custom name plate, programming and RKAs. Electrical RF Standards Compliance Data Sheet Voltage 120/240V (depending on meter form) Power Max: 2.2W (1.2W meter, 1W transceiver) Typical: 1.2W (.7W meter, .5W transceiver) Output Power +26 dBm +/-2 dBm Adjacent Channel Power +50 dBc Nominal Transmit Frequency 902 to 928 MHz ISM unlicensed (FCC Part 15) Communication Protocol Stat RF MESH Protocol Receive Sensitivity -108 dBm minimum FCC Title 47 CFR Part 15 Radiated and Conducted Emissions (incl. intentional radiators) IEC 61000 4-2,3,4,5,11,12 Electromagnetic Compatibility ANSI C12.19 Compatible with Utility Industry End Device Tables ANSI C12.20 National Standard for Electricity Meters - 0.2 and 0.5 Accuracy Classes ANSI C12.21 Code for Electricity Metering ANSI C37.90.1 (1989) Standard Surge Withstand Capability (SWC) Tests PUBS-0762-0001 Rev A FOCUS Universal RF Endpoint Data Sheet Cellnet+Hunt Table 1. FOCUS Universal RF Endpoint Specifications Category Environmental Mechanical Specification General Environmental Outdoor, rain-protected, sunlight-exposed Operating Temperature Range -40 to +70 C (under meter glass) Humidity 0 to 95% relative humidity, non-condensing Size 4 H x 4.8125 W x 1.25 D inches, typical Weight 5 ounces (142 g), typical Contact Information: Value or Range Technical Support: Internet: Fax 1-888-390-5733 www.cellnethunt.com 1-218-562-5530 support@cellnethunt.com PUBS-0762-0001 Rev A E-mail: Data Sheet
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c320 44.293068, Sun Jul 08 2007 18:10:11 Format : application/pdf Title : PUBS-0762-0001 Stat+Utilinet FOCUS Integrated Endpoint Data Sheet.fm Creator : kims Create Date : 2001:06:20 16:18:34Z Creator Tool : FrameMaker 8.0 Modify Date : 2008:05:12 08:55:52-05:00 Metadata Date : 2008:05:12 08:55:52-05:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:4d4e1136-dab5-45da-a55b-8e15aec20220 Instance ID : uuid:28371b5d-7294-425b-8651-cc229779e473 Page Count : 4 Author : kimsEXIF Metadata provided by EXIF.tools