Lathem Time PX2500 Facial Recognition Terminal User Manual CT74 User Guide

Lathem Time Corporation Facial Recognition Terminal CT74 User Guide

Users Manual

Download: Lathem Time PX2500 Facial Recognition Terminal User Manual CT74 User Guide
Mirror Download [FCC.gov]Lathem Time PX2500 Facial Recognition Terminal User Manual CT74 User Guide
Document ID3031144
Application IDYyaRoMlAS+3j+L2FNW98eg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.35kB (279412 bits)
Date Submitted2016-06-16 00:00:00
Date Available2016-07-31 00:00:00
Creation Date2017-12-08 13:05:33
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-08 13:05:33
Document TitleMicrosoft Word - CT74 User Guide
Document CreatorPScript5.dll Version 5.2.2
Document Author: BJ108

CT74 Series Facial Recognition
Terminal
User Manual
Original operating instructions Version 1.1 / 03-2015
Confidential
EN
Page 1
General Notice
Although every care has been taken to ensure that this manual is reliable and accurate,
Lathem Time Corporation(here after referred to as Lathem) provides it ‘as is’ and without
express, implied,or limited warranty of any kind. In no event shall Lathem Time
Corporation be liable for any loss or damage caused by the use of this manual.
This manual describes CT74 facial recognition terminal in detail and contains full operating
instructions.
Lathem reserves the rights to change the specifications and information in this document
without notice. The information contained herein is proprietary to Lathem. Release to third
parties of this publication or of information contained herein is prohibited without the prior
written consent of Lathem Time Corporation
Copyright © Lathem, 2014
Confidential
Page 2
Content
1.
Product Features ............................................................................................................... 4
1.1 Appearance View ............................................................................................................. 4
1.3 Connection Port ............................................................................................................... 6
2.
Appendix ............................................................................................................................ 8
Appendix1. Product Specification ......................................................................................... 8
Appendix2. Caution ............................................................................................................... 8
Confidential
Page 3
1. Product Features
1.1 Appearance View
1. Touch Screen
2. RFID reader
3. LED lights
4. Camera
5. Speaker
6. Network LED Indicator
Confidential
Page 4
1. Reset button
2. USB socket
1.
Ethernet Jacket
2.
USB Port
3.
3-Pin Connection Port
4.
Power Adapter Port
Confidential
Page 5
1.2 Connection Port
 NC/NO/COM: relay output for access power supplies
 Normal Close (NC): the standard status is CLOSE.
 Normal Open (NO): the standard status is OPEN.
 COM: common port
2. Software
1.
Test RFID card
a)  : enable RFID testing.
b) Card SN: show RFID card number.
Confidential
Page 6
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
c) : Disable RFID testing.
Hardware IO testing
a)  & : enable / disable IO testing.
b)  & : test buzzer.
c)  & : test relay output signal.
d)  & : test LCD backlit
SN & MAC display
Camera Test
Speaker Test
System Time Settings
Touch Screen Calibrate
LCD display Test
Network status display
RGB Camera Test
Infrared Camera Test
Infrared Light On/OFF
Confidential
Page 7
3. Appendix
Appendix1. Product Specification

Verification methods
Face
Card and Face
Card or Face
Card
Card and Photo
ID and Pin

Languages:
English

Recognition algorithm
V2.6 or V3.1



Display: 7 inch Touch Screen
RFID card: Proximity card (125KHz)
Communication
TCP/IP
USB port




Power: 12V DC, 1.5A
Environment Light: 0-10000Lux
Working Temperature: 0°C-40°C
Working Humidity: 20% - 80%
Appendix2. Caution

Installation Environment
Terminal should install inside of the room, and make sure the installation place far
with the window/door/light more than 2 meters.
Confidential
Page 8
Outside of the room

Sunlight directly shines on the
terminal through the window.
Sunlight slanted shines on the
terminal through the window.
Restoration and restart
When the system halted and cannot quit, you can remove the adapter to restore and
restart the system, or you also can press  to restart the terminal.

Restore to default setting
Restore all parameters to the default setting.

Non-Water proof
The terminal is non-waterproof, please keep away from water.

Prevent from Falling
The parts in this terminal are friable; please prevent the terminal from dropping,
smashing, bending and high pressure.

Cleaning
Please use soft cloth or the other similar material to clean the screen and faceplate,
please avoid cleaning with water and cleanser.

Low Temperature Environment
The working temperature for screen and the main parts in this terminal are the normal
indoor temperature. The performance of this terminal will get worse, if the working
temperature extend this temperature range.
Confidential
Page 9
Please prevent the screen from oil
or any sharp objects.
Please use the equipped adapter
for the terminal, the other
unknown adapters will burn out
th t
i l
Warning
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user‟s authority to operate the equipment. This device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: —Reorient or
relocate the receiving antenna. —Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the
radiator& your body.
Confidential
Page 10

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : BJ108
Create Date                     : 2016:06:07 16:38:11+08:00
Modify Date                     : 2016:06:16 19:48:11-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:06:16 19:48:11-07:00
Format                          : application/pdf
Title                           : Microsoft Word - CT74 User Guide
Creator                         : BJ108
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:6e479db9-1795-4e07-afe9-c2f019ae172a
Instance ID                     : uuid:91858559-d476-4f01-8d6d-5c6c21e95847
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UP3-PX2500

Navigation menu