Launch Tech GOLOG5001 Automotive Diagnosis Terminal User Manual golo5 Quick Start Guide

Launch Tech Co., Ltd. Automotive Diagnosis Terminal golo5 Quick Start Guide

User manual

Download AppHow to insert SIM cardKeep purple:Flash in purple :Flash in blue:Flash in red:Fast flash in red:Fast flash in blue:golo works properlyNetwork and GPS errorGPS errorNetwork errorFirmware updatinggolo dormancyLong press for 10s:Long press for 5s:reset WiFi passwordrestart the connectorQuick Startwebsite:www.en.golo365.com/HelpFor more instruction, seeon the AppAbout golocarcare1. Unscrew the back cover .2. Insert the card parallel with the arrowmarked on the body .Note: The SIM card is not provided with goloconnector. You have to prepare it.Scan QR code todownload thegolo carcare AppYou can also search inand to get theApp.golo carcareApp Store Google playSIM cardWiFi switchLED indicatorwww.cnlaunch.com/en/AppearanceOBDII port
The OBDII port usually locates under theinstrument panel, .For detailed location, see related vehicle manual.towards the driver's left knee areaPlug your golo into OBDII port of stoppedcar before performing golo functions.WLAN ONgolo xxxxxxxxxxxxConnectedConnect to golo WiFi after confirmingthe golo works properly (see the LEDindicator).WiFi: goloxxxxxxxxxxxxInitial password: 1234567890OBDII portNote: For the first time, you are advised toinitialize the connector to make sure that themonitoring function works properly.2. Install golo 3. WiFi1. Activate goloInitialization: Plug the connector, start the engineand keep the engine running in idle speed forabout 3 minutes.For new users, create a golo carcareaccount before activating your golo.For existing users, login to golo carcareto activate your golo.To activate a golo, enter your carinformation, golo S/N, activation code,and download required diagnosis file.Please make sure entered contents are correctso that all golo functions can work properly.S/N and Activation Code will be found in theenvelope within the packing box.Quick Start
FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

Navigation menu