Launch Tech GOLOG5001 Automotive Diagnosis Terminal User Manual golo5 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	2673044
Application ID	PYG0IEEgwi4cwI6s+dAFBw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.92kB (199032 bits)
Date Submitted	2015-07-09 00:00:00
Date Available	2015-07-09 00:00:00
Creation Date	2015-06-29 16:02:23
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2015-07-08 15:50:53
Document Title	golo5 Quick Start Guide.cdr
Document Creator	Adobe Acrobat Pro 9.3.2
Document Author:	qiuyihui

Appearance
How to insert SIM card
Download App
OBDII port
Scan QR code to
download the
golo carcare App
You can also search golo carcare in
App Store and Google play to get the
App.
Quick Start
SIM card
WiFi switch
Long press for 10s: reset WiFi password
Long press for 5s: restart the connector
1. Unscrew the back cover .
2. Insert the card parallel with the arrow
marked on the body .
LED indicator
Keep purple: golo works properly
Flash in purple : Network and GPS error
Flash in blue: GPS error
Fast flash in blue: golo dormancy
Flash in red: Network error
Fast flash in red: Firmware updating
Note: The SIM card is not provided with golo
connector. You have to prepare it.
Help
For more instruction, see About golo
carcare on the App
website:www.en.golo365.com/
www.cnlaunch.com/en/
Quick Start
1. Activate golo
For new users, create a golo carcare
account before activating your golo.
For existing users, login to golo carcare
to activate your golo.
To activate a golo, enter your car
information, golo S/N, activation code,
and download required diagnosis file.
Please make sure entered contents are correct
so that all golo functions can work properly.
S/N and Activation Code will be found in the
envelope within the packing box.
2. Install golo
3. WiFi
Plug your golo into OBDII port of stopped Connect to golo WiFi after confirming
the golo works properly (see the LED
car before performing golo functions.
indicator).
The OBDII port usually locates under the
instrument panel, towards the driver's left knee area. WiFi: goloxxxxxxxxxxxx
Initial password: 1234567890
For detailed location, see related vehicle manual.
WLAN
golo xxxxxxxxxxxx
Connected
OBDII port
Note: For the first time, you are advised to
initialize the connector to make sure that the
monitoring function works properly.
Initialization: Plug the connector, start the engine
and keep the engine running in idle speed for
about 3 minutes.
ON
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : qiuyihui
Create Date                     : 2015:06:29 16:02:23+08:00
Modify Date                     : 2015:07:08 15:50:53+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:07:08 15:50:53+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.2
Format                          : application/pdf
Title                           : golo5 Quick Start Guide.cdr
Creator                         : qiuyihui
Document ID                     : uuid:ddf5e38f-8b3a-4020-8626-e09c3f623c2f
Instance ID                     : uuid:6b7ee7d5-58e7-4ada-b5dc-928d578f6a92
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 3

EXIF Metadata provided by EXIF.tools