Lee Technology Korea LT2009A TOPVIEW PAGER User Manual LT2009A Manual

Download:
Mirror Download [FCC.gov]
Document ID	1059724
Application ID	h2fIGlsVig2ROfki9doV9A==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.24kB (302997 bits)
Date Submitted	2009-01-21 00:00:00
Date Available	2009-01-22 00:00:00
Creation Date	2009-01-20 14:03:39
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-01-20 14:03:39
Document Title	Microsoft Word - LT2009A_Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Kim2

Top-View Paging System
User Manual
(Manual Ver. 1.00)
LEE TECHNOLOGY KOREA CO., LTD.
email sales@leetek.org
website www.leetekorea.com
KOREA HEADQUARTER
US OFFICE
3 FL. #499-2, Sang3-dong,
6040 Unity Drive Suite L,
Wonmi-gu, Pucheon-city,
Norcross, GA30071, U.S.A
rd
Kyunggi-do, Korea
tel +82-32-324-9838
tel +1-678-218-0990
fax +82-32-324-9840
fax +1-678-218-0991
LEE Technology Korea Co., Ltd.
Top View Paging System
User Manual
1. EQUIPMENT SETUP
1) Charger Setup
Charger Base
(1 per 15 pagers)
W/ Power Supply
DC12V 2.5A
(1) Remove contents of box and be sure you have all the necessary hardware:
Pagers, Chargers, power supplies and etc.
(2) You may wish to keep the holders flat on a table or mount them
perpendicular to a wall.
Plug the power supply into a standard wall outlet and plug the other end
into either hole on the side of the Charger Base.
If using more than 15 Pagers connect the Chargers together as shown using
the power supply and jumper wires.
2) Pager Charging
※ CHARGE YOUR PAGERS FOR 8 HOURS PRIOR TO USE
(1) Insert your Top‐View Pagers into the slot of the Charger.
(2) The red light should come in front of each Pager indicating that it is charged
properly. Be sure all red lights with Pagers come on when a Pager is inserted
into the slot.
(3) If no light comes on, check your wires and be sure the Chargers are plugged in
using the included power supply.
(4) If some lights come on and others do not, be sure the jumper wires are
installed properly (each side alternates jumpers). Please refer to Charger
Hookup above.
LEE Technology Korea Co., Ltd.
Top View Paging System
User Manual
※ The software of the products might be changed without the notice.
2. Top View Pager (For SEEKER Transmitter)
1) SPEC
12 Digits Display
Rechargeable Battery Included
2 Button Switch (Up/Down)
* The “Down” switch is not currently available.
5 LEDs
Vibe and LED Flashing Alert
Maximum 10 Number Can Be Stored.
2) PAGER SETUP
(1) Insert your pager into the slot of its charger base.
(2) The red LED on the top lights up and it indicates the pager is charged properly.
(3) Whenever you remove a charged pager from its slot, red light will blink with the
initial message, SEEKER COMMUNICATION, for 10 seconds.
(4) “READY” is displayed on LCD.
3) POWER ON/OFF
Press switch (Up) more than 3 seconds.
4) PAGE
The corresponding table number is displayed with the alert for 2 minutes. When
paged.
Press the button to stop alert.
After pressing the button, the message displays for 15 sec.
The alert time is alternative, pager displays “PAGED”
LEE Technology Korea Co., Ltd.
Top View Paging System
User Manual
5) MESSAGE
(1) CAPCODE 1
9090 – Message alert time for 8 sec (Vibe 1sec/LED ALL ON 1sec)
9091 – Message alert time for 15 sec (Vibe 1sec/LED ALL ON 1sec)
9092 – Message alert time for 30 sec (Vibe 1sec/LED ALL ON 1sec)
9093 – Message alert time for 60 sec (Vibe 1sec/LED ALL ON 1sec)
9292 – VIBE ONLY
9393 – OUT OF RANGE OFF
9494 – OUT OF RANGE ON
9595 – LED/BEEP
9696 – LED/VIBE
9797 – LED
9898 – LED/BEEP/VIBE
99 – SLEEP MODE
8181 – F1, F2, F3, F4 → Message displays with the standard Alert.
8182 – F1, F2, F3, F4 → Message displays with the “Option Vibe” alert.
“Option Vibe”
F1 → Vibration Only for 11 seconds
F2 → Vibration Only for 3 times
F3 → Vibration Only for 4 times
F4 → Vibration Only for 6 times
(2) CAPCODE 2
1) A (F1), B (F2), C (F3), D (F4), 11, 22, 33, 44 – 8 CANNED MESSAGE are available in
PC Software.
2) 99 – STOP MODE
3) Other Messages
• Top LED continually blinks, unless the user checks the message.
• To enter the message delete mode, press the switch for more than 2 sec.
• To select the mode, DELETE/ALL DELETE/STANDBY, press the switch for 2 sec.
• Selected message can be deleted by pressing the switch for 2 sec.
LEE Technology Korea Co., Ltd.
Top View Paging System
User Manual
(3) CAPCODE 3
1) Out of Range Mode – Out of Range Message is displayed on LCD with LED Flash.
(4) CAPCODE 4
1) Available in sending a message to all group pagers.
2) Canned Messages can be sent to all group pagers by press 110 and F1 key,
and then a pre‐defined message for the F1 is sent to all group pagers, or press
[110 + Enter → 11 + Enter], and then a pre‐defined message for the 11 is sent
to all group pagers.
※ The sample product is set with the Option of “8182” (Option Vibe)
※ If you would like to change the option vibe mode to the standard alert, and then press
“911 ‐ ENTER – 8181 – ENTER”
LEE Technology Korea Co., Ltd.
Top View Paging System
User Manual
3. Top View Pager (For 4 Light Paging System)
1) To Turn pager ON
◈ Press the button at the side of pager for more than 3 seconds, and then it will be turned
on with a flashing on LEDs.
2) To stop the alert
◈ Press the button shortly at the side of pager to stop the alert.
3) Page Alert
◈ When the pager is alerted, vibrating lasts for 11 seconds and corresponding LED will keep
flashing until the user presses the side button.
4) Program‐mining page alert mode
Alert Type
Description
9393
Turn out of range OFF
9494
Turn out of range ON
5) To send a distinctive individual message
◈ With this feature, you have the option of receiving the different messages as described
below;
① Return Pager: Press pager no. and “F1” button on the PS‐3500 transmitter, then a LED at
the “Return pager” will be vibrating for 11 seconds continuously and
flashing until pressing the side button.
② Baby hungry: Press pager no. and “F2” button on the PS‐3500 transmitter, then a LED at
the “Baby hungry” will be vibrating 3 times for 11seconds and flashing until
pressing the side button.
③ Child fine: Press pager no. and “F3” button on the PS‐3500 transmitter, then a LED at the
“Child fine” will be vibrating 4 times for 11 seconds and flashing until pressing
the side button.
④ Please come: Press pager no. and “F4” button on the PS‐3500 transmitter, then a LED at
the “Please come” will be vibrating 6 times for 11 seconds and flashing
until pressing the side button.
LEE Technology Korea Co., Ltd.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY
TO OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
LEE Technology Korea Co., Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:01:20 14:03:39+09:00
Create Date                     : 2009:01:20 14:03:39+09:00
Format                          : application/pdf
Title                           : Microsoft Word - LT2009A_Manual.doc
Creator                         : Kim2
Document ID                     : uuid:d664816e-d9c2-48a4-a2c9-3fd7d7c9ba79
Instance ID                     : uuid:521eb279-2632-46a9-a35f-57d1634a4d5b
Page Count                      : 7
Author                          : Kim2

EXIF Metadata provided by EXIF.tools