Leica Biosystems Nussloch SPECTRAST Multistainer User Manual Leica HistoCore SPECTRA ST Gebrauchsanweisung V 1 0 RevA

Leica Biosystems Nussloch GmbH Multistainer Leica HistoCore SPECTRA ST Gebrauchsanweisung V 1 0 RevA

Contents

HistoCore_SPECTRA_ST_RFID-Registration_1v1B_Multi.pdf

RFID-RegistrationHistoCore SPECTRA STRFID RFID RFID RFID-Registration HistoCore SPECTRA STOrder-No.: 14 0512 89998 RevBAlways keep this information with the instrument.Read carefully before working with the instrument.V 1.1 RevB - 04/2016
1For HistoCore SPECTRA STRFID-Registration for Australia and New Zealand ............................................................................ 2RFID-Registration for the Peoples Republic of China ....................................................................... 2RFID-Registration for Israel ................................................................................................................... 3RFID-Registration for Japan .................................................................................................................. 3RFID-Registration for South Korea ....................................................................................................... 4RFID-Registration for Singapore ........................................................................................................... 5RFID-Registration for the United Arab Emirates ................................................................................ 5RFID-Registration for the United States of America and Canada ................................................... 6Table of Contents
2RFID-Registration V 1.1 RevB – 04/2016RFID-Registration HistoCore SPECTRA STRFID-Registration for Australia and New ZealandSymbol on the Identification Label:Title of Symbol: RCM Compliance MarkDescription:The Regulatory Compliance Mark (RCM) indicates a device's compliance with applicable ACMA technical standards of New Zealand and Australia – that is, for telecommunications, radio communications, EMC and EME.
3For HistoCore SPECTRA STRFID-Registration HistoCore SPECTRA ST:הזיראה לע למסהMOC םושיר רפסמ :למסה תרתוכ יטוחלא רישכמש ןייצמ םושירה רפסמ תרושקתה דרשמב גוס רושיא לביק.ילארשיה :רואיתRFID-Registration for IsraelRFID-Registration for Japan
4RFID-Registration V 1.1 RevB – 04/2016RFID-Registration HistoCore SPECTRA ST
5For HistoCore SPECTRA STRFID-Registration HistoCore SPECTRA STSymbol on the Identification Label:Title of Symbol: IDA compliance markDescription:Infocomm Development Authority (IDA) Type Approval is a requirement for Radio and Telecommunications Terminal Equipment (RTTE) to comply with specific technical specifications of Singapore.RFID-Registration for SingaporeRFID-Registration for the United Arab Emirates
6RFID-Registration V 1.1 RevB – 04/2016RFID-Registration HistoCore SPECTRA STSymbol on the Identification Label:FCC ID: 2AAPD-SPECTRASTIC: 12028A-SPECTRASTTitle of Symbol: FCC-Approved EquipmentDescription:This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux ap-pareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RFID-Registration for the United States of America and Canada
7For HistoCore SPECTRA STRFID-Registration HistoCore SPECTRA STRFID-Registration for the United States of America and Canada (Continued)This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not ins-talled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modifications made to this equipment not expressly approved by Leica Biosystems Nussloch GmbH may void the FCC authorization to operate this equip-ment.
8RFID-Registration V 1.1 RevB – 04/2016
www.LeicaBiosystems.comLeica Biosystems Nussloch GmbHHeidelberger Straße 17-19D- 69226 NusslochTel.: +49 - (0) 6224 - 143 0Fax: +49 - (0) 6224 - 143 268Web: www.LeicaBiosystems.com

Navigation menu