Leica Biosystems Nussloch SPECTRAST Multistainer User Manual Leica HistoCore SPECTRA ST Gebrauchsanweisung V 1 0 RevA

Leica Biosystems Nussloch GmbH Multistainer Leica HistoCore SPECTRA ST Gebrauchsanweisung V 1 0 RevA

Contents

HistoCore_SPECTRA_ST_RFID-Registration_1v1B_Multi.pdf

RFID-Registration
HistoCore SPECTRA ST
RFID
RFID
RFID
RFID-Registration HistoCore SPECTRA ST
Order-No.: 14 0512 89998 RevB
Always keep this information with the instrument.
Read carefully before working with the instrument.
V 1.1 RevB - 04/2016
1
For HistoCore SPECTRA ST
RFID-Registration for Australia and New Zealand ............................................................................ 2
RFID-Registration for the Peoples Republic of China ....................................................................... 2
RFID-Registration for Israel ................................................................................................................... 3
RFID-Registration for Japan .................................................................................................................. 3
RFID-Registration for South Korea ....................................................................................................... 4
RFID-Registration for Singapore ........................................................................................................... 5
RFID-Registration for the United Arab Emirates ................................................................................ 5
RFID-Registration for the United States of America and Canada ................................................... 6
Table of Contents
2RFID-Registration V 1.1 RevB – 04/2016
RFID-Registration HistoCore SPECTRA ST
RFID-Registration for Australia and New Zealand
Symbol on the Identification Label:
Title of Symbol: RCM Compliance Mark
Description:
The Regulatory Compliance Mark (RCM) indicates a device's compliance with
applicable ACMA technical standards of New Zealand and Australia – that is, for
telecommunications, radio communications, EMC and EME.
3
For HistoCore SPECTRA ST
RFID-Registration HistoCore SPECTRA ST
:הזיראה לע למסה
MOC םושיר רפסמ :למסה תרתוכ
יטוחלא רישכמש ןייצמ םושירה רפסמ
תרושקתה דרשמב גוס רושיא לביק
.ילארשיה
:רואית
RFID-Registration for Israel
RFID-Registration for Japan
4RFID-Registration V 1.1 RevB – 04/2016
RFID-Registration HistoCore SPECTRA ST
5
For HistoCore SPECTRA ST
RFID-Registration HistoCore SPECTRA ST
Symbol on the Identification Label:
Title of Symbol: IDA compliance mark
Description:
Infocomm Development Authority (IDA) Type Approval is a requirement for Radio and
Telecommunications Terminal Equipment (RTTE) to comply with specific technical
specifications of Singapore.
RFID-Registration for Singapore
RFID-Registration for the United Arab Emirates
6RFID-Registration V 1.1 RevB – 04/2016
RFID-Registration HistoCore SPECTRA ST
Symbol on the Identification Label:
FCC ID: 2AAPD-SPECTRAST
IC: 12028A-SPECTRAST
Title of Symbol: FCC-Approved Equipment
Description:
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux ap-
pareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
RFID-Registration for the United States of America and Canada
7
For HistoCore SPECTRA ST
RFID-Registration HistoCore SPECTRA ST
RFID-Registration for the United States of America and Canada (Continued)
This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not ins-
talled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Leica
Biosystems Nussloch GmbH may void the FCC authorization to operate this equip-
ment.
8RFID-Registration V 1.1 RevB – 04/2016
www.LeicaBiosystems.com
Leica Biosystems Nussloch GmbH
Heidelberger Straße 17-19
D- 69226 Nussloch
Tel.: +49 - (0) 6224 - 143 0
Fax: +49 - (0) 6224 - 143 268
Web: www.LeicaBiosystems.com

Navigation menu