Leica Geosystems CPD CPD0401 Bluetooth Laser Distancemeter User Manual Daumenregister

Leica Geosystems AG, CPD Bluetooth Laser Distancemeter Daumenregister

Contents

Users Manual 1 of 2

Download: Leica Geosystems CPD CPD0401 Bluetooth Laser Distancemeter User Manual Daumenregister
Mirror Download [FCC.gov]Leica Geosystems CPD CPD0401 Bluetooth Laser Distancemeter User Manual Daumenregister
Document ID400191
Application IDtH/0LKqUC3A6sL2LNY6HfA==
Document DescriptionUsers Manual 1 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize74.73kB (934177 bits)
Date Submitted2004-03-01 00:00:00
Date Available2004-03-01 00:00:00
Creation Date2003-10-23 10:07:41
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-11-03 10:26:11
Document TitleDaumenregister.fm
Document CreatorFrameMaker 7.0
Document Author: ROG

de
18
2nd function level
18 delete
19 enter
20 direction left upward
21 direction left
22 direction left downward
19
GB
Display
fr
it
es
nl
ja
23 direction upward
24 direction downward
25 direction right downward
26 direction right
27 direction right upward
10
26 24 22 20
27 25 23 21 19
26
22 24
11 13 15
17 20
25
27
21
23
12 14
16
D5-Z1
function level
1 Distance measuring,
10 Menu
Tracking
2 2nd - function level 1 or 2 11 Illumination
3 Meas. reference
12 Multiply [ x ]/ Timer
Release
4 Areas, Volumes
13 On/off key
5 Measuring
14 Clear
6 min. / max. Tracking
15 Mermory, Stack
16 Equals, Enter
7 Bluetooth® ON/OFF
8 Pythagoras functions
17 Minus [ - ]
9 Plus [ + ]
1st
Display
18
17
16
15
14
10
11
12
13
D5-Z2
1 Laser "on"
2 Measurement reference (front/ stand/ rear)
3 Information
4 Bluetooth® on/off
5 Display of the mathematical signs/operations
6 Main display (e.g. measured distance)
7 Distance measurement
8 Tracking
9 Area/ Volume
10 min. Tracking
11 max. Tracking
12 Pythagoras function
13 Pythagoras function with partial height
14 Units with exponents (²/ ³)
15 Time symbol for time delay release
16 Save constant
17 Contact customer service
18 3 auxiliary displays (e.g. previous values)
19 SET
20 RESET
21 Battery display
22 2nd function level
23 Recall stored constant (max. 10)
24 Recall last 15 values
25 Illumination (on/ off)
26 Beep (on/ off)
27 Offset setting
Leica DISTO™ plus 1.0.0 GB
How to Use the Instrument
1st Function level
Inserting / replacing the batteries
Leica DISTO™ plus switching on/off
1 Depress the locking clip and slide end piece to the right.
Briefly press.
The illumination, Battery and Beep symbols are displayed
until the first key press.
The instrument can be switched off from any menu point.
The instrument switches off automatically after
90 seconds if no key is pressed.
An unwanted switching off of the Bluetooth-dataconnection is blocked by special precautions. Please refer
to page 11.
D5-Z3
2 Remove battery cover. Replace batteries.
Appears on the display if battery voltage is too
low.
Clear key
For type of battery, refer to Technical Data.
The clear key may be pressed before or after a
measurement/ calculation.
In Menu Mode it resets to Normal Mode.
Fit batteries the right way round.
Use only Alkaline batteries.
3 Push in end piece and listen for locking click sound.
Leica DISTO™ plus 1.0.0 GB
During a function (area, volume or Pythagoras) the single
measurements can be deleted step by step and
remeasured.
In the menu settings, the program is terminated if the
Equal (=) and Enter keys are not pressed.
GB
Illumination
Briefly press.
Illumination is switched on/off with a key press.
fr
Illumination switches off after 30 seconds if no
key is pressed.
Reference setting
it
Press until desired reference setting appears.
es
The clear key may be pressed before or after a
measurement/ calculation.
de
nl
How to Use the Instrument
ja
de
A second press starts the distance
measurement.
Possible settings
Continuous measurement (Tracking)
The result is displayed immediately in the selected unit.
With the instrument on and the laser off, it is in
"Normal Mode".
GB
With the laser on, it is in "Pointing Mode".
appears on the display.
Continuous measurement is started and the
result is displayed.
Press to end Tracking Mode. Last result is
shown in the display.
Measuring from flat planes
fr
Press until
Example: Stake off distance
D5-Z4
front
it
es
stand
rear
At the back of the instrument is a 1/4" camera
thread for the stand.
Settings remain valid until the reference level is
changed or the instrument is automatically or manually
switched off.
Measuring from corners
D5-Z5
For stable measuring turn bumper 90°.
D5-Z7
Laser in continous operation
Basic setting: rear reference
Press until a long "beep" is heard. Now the laser
is activated permanently.
Measuring
nl
A distance measurement is triggered each time
the key is pressed.
Distance measurement
D5-Z6
Press and the laser is switched on, the
instrument is in "Pointing Mode".
ja
1st Function level
Press to end continuous laser operation.
Leica DISTO™ plus 1.0.0 GB
Time delay release
Instrument must be in Pointing Mode.
Press and hold until desired time delay has been
reached (max. 60 seconds).
de
Press to toggle between the functions.
Calculations
Area
Press until
GB
appears on the display.
Once the key is released, the remaining seconds (e.g. 59,
58, 57...) are displayed, until measuring.
The last 5 seconds are counted down with a "beep".
After the last "beep", the measurement is made and the
value displayed.
Example: Measuring without any key activation.
appears on the display.
The side to be measured blinks.
Make 2 measurements (l x w).
The result and the two partial results appear on the
display.
Press until
appears on the display.
The side to be measured blinks.
Menü aufrufen:
Volume
Make 3 measurements (l x w x h).
The result and the three partial results appear on the
display.
D5-Z8
Menu/ Settings
The menus allow a free selection of the settings that are to
remain valid after switching off the instrument. The
functions follow each other endlessly (rollmode).
Leica DISTO™ plus 1.0.0 GB
fr
D5-Z9
Measure with offset (add/reduce)
Selecting measuring units
Beep
Reset
Press until desired menu point appears or with
key [+ / -] switch between the various menu
points.
it
es
Confirm selection, activate menu point.
or with key [+ / -] change setting as desired.
1st Function level
nl
ja
de
Selecting units (menu)
Selectable units:
fr
it
After making/changing settings, it is imperative
that a test measurement is performed.
blinks on the display.
"Clear Entry" may also be used (e.g. to cancel a
selection).
GB
Call up menu point.
Confirm selection, reset to Normal Mode.
–
m (mm) = 0.000 m
–
14’ 06’’ 1/16 = ’ ’’ 1/16
–
m (cm) = 0.00 m
–
in = 0.0 in
–
ft = 0.00 ft
–
in 1/16 = 0 1/16in
–
ft in 1/16 = 0.00 1/16ft in
With key [+ / -] set desired offset (=shifting reference) (e.g.
0,015m); quick set by keeping key pressed.
For larger steps hold additionally.
Offset can be positive (add) or negative
(reduce)!
Confirm setting.
Is displayed continuously if offset
Measure with offset (menu)
≠
0.
Subject to set offset, the measured results are
displayed.
Using this function you can measure with rough size, as an
example!
Please make this a rule: After rough size measurement
always set the Leica DISTO™ plus to offset 0.000: Call up
function as described
Press.
es
nl
D5-Z10
Resetting (menu)
Call up menu point.
starts blinking on the display.
With key [+ / -] select components to be reset. To choose
from:
Stack/ Mermory
Stack and Constant
If additional symbols e.g. units are shown in the display,
the following values are reset:
– Offset (=0), Beep (On) and Units (meter)
Selected components are reset; back to
Measuring Mode.
Save values (constants)
Measure/ calculate desired value (e.g. height of room,
area, volume).
Press longer.
Confirm function.
ja
1st Function level
Leica DISTO™ plus 1.0.0 GB
starts to blink on the display.
With key [+ / -] adjust value as desired (e.g. from 2.297m
to 2.300m).
For larger steps press and hold additionally.
Press to adjust unit (²/³).
The adjustment is for m, m² and m³ rsp. ft, ft² and
With key [+ / -] select desired mermory (1 to 10).
Confirm; value is ready to be used for (e.g.
calculating an area) or
Recall last measured value (Stack)
Briefly press twice
and the last value in the display is shown.
Confirm.
With key [+ / -] select desired value (max. 15!).
Confirm; value is ready to be used for (e.g.
calculating an area).
and a number (=memory location) starts to blink.
Tracking - Minimum
ft³ only.
Leica DISTO™ plus 1.0.0 GB
GB
Move the Leica DISTO™ plus a large amount around the
target point.
Stop continuous measurement.
fr
The smallest measurement is displayed (e.g. 3.215m =
height of room).
it
Tracking - Maximum
es
Recalling the constant
and the contents of the first constant memory
location are displayed (e.g. 2.300m).
Aim Leica DISTO™ plus approximately at the target point.
Activate continuos measurement with a brief
press.
Both planes (e.g. floor/ ceiling, walls) must be
nearly parallel to each other.
With key [+ / -] select memory location (1-10).
Save value.
Briefly press.
de
appears on the display.
D5-Z11
Determine the minimum dimension, e.g. ceiling height,
without having to precisely align to the normal.
Press until
nl
D5-Z12
1st Function level
ja
de
Determine maximum dimension, e.g. to determine the
(room) diagonal.
Press until
GB
fr
appears on the display.
Move the Leica DISTO™ plus a large amount around the
target point.
Activate continuous measurement with a brief
press.
it
Slowly rotate the Leica DISTO™ plus to the right/ left past
the corner.
Stop continuous measurement.
es
The largest measurement is displayed (e.g. 12.314m =
diagonal of room).
ja
In the same way chain values (= any amount of
distance measurements) and sums of areas/ volumes can
be added up.
Add by [ + ] key.
Make additional measurements.
= Sum (=half circumference)
With key [ + ] repeat, double measured value.
= Sum (=circumference)
During calculations "Clear" is available as long
as the function has not been executed!
Multiplication
Make measurement (e.g. 8.375m).
Multiplication by pressing [ x ] key.
Additional measurements (e.g. 8.375m).
= Area (e.g. 29.313m²)
The volume can be calculated by an additional
multiplication following an area calculation.
This function can be used for calculating areas or volumes
with individual partial heights/ partial distances.
Pythagoras, height/ width measurement
Partial heights, partial distances
Doubling a measured value
Make measurement.
Add by [ + ] key/ Subtract by[ - ] key.
It is easy to double the measured values, e.g. to determine
the length of walls in a room:
Make measurement.
any case!
Calculations
nl
Make additional measurements.
= Result.
1st Function level
D5-Z13
The measuring sequence must be adhered to in
All three (two) points must be on a vertical or
horizontal line in the plane of the wall!
Leica DISTO™ plus 1.0.0 GB
)
With each of the distance measurements you
can use:
• a simple distance measurement,
• a value from stack/ mermory or
• a measurement with time delay release.
For short distances, a good base behind the
instrument is sufficient for mechanical alignment.
You will obtain the best results if the Leica
DISTO™ plus is rotated around a fixed point (rear edge,
thread position) and the axis of the laser beam passes
through this axis. The Leica DISTO™ plus should not be
placed on a camera tripod without an adapter, as the axis
of the laser beam would be 70 to 100 mm above the instrument’s axis of rotation. Without the adapter this would lead
to significant height deviations in the measurements.
Determination with two points
For estimating the height/
width of buildings. Very
useful for making measurements from standing position
(no bending) if the height is
determined with two or three
distances.
Leica DISTO™ plus 1.0.0 GB
Press until
Detemination with 3 points
de
appears on the display; laser is activated and "1
---" starts blinking.
GB
Aim at the upper point (1).
Trigger measurement; do not move the
instrument!
Value is accepted.
appears on the display and "2 ---" starts blinking.
Point the Leica DISTO™ plus approximately horizontal (2).
Press, a continuous measurement is triggered.
Move the Leica DISTO™ plus a large amount around the
ideal measurement point.
Stop of continuous measurement. The height
and width are displayed from measurements
(Pythagoras).
Press until
fr
appears on the display; laser is activated and "1
---" starts blinking.
Aim at the upper point (1).
it
Trigger measurement; do not move the
instrument!
Value is accepted.
appears on the display and "2 ---" starts blinking.
Point the Leica DISTO™ plus approximately horizontal (2).
Press, a continuous measurement is triggered.
1st Function level
es
nl
ja
de
GB
fr
Move the Leica DISTO™ plus a large amount around the
ideal measurement point.
Stop of continuous measurement.
Press until
Value is accepted and and on the display "3 ---" starts
blinking.
Aim at the lower point (3).
Aim at the upper point (1).
Only in the second level can measured values
be transferred or corrected with the Leica DISTO™ plus.
The type and number of functions that can be activated in
the second function level depend on the software used.
Trigger measurement; do not move the
instrument!
Switching on the Bluetooth®
Trigger measurement; do not move the
instrument!
The height and width are displayed from three
measurements (Pythagoras).
it
Determination of a partial height with 3
points
Height determination between
point 1 and point 2 with three
measured points.
es
nl
ja
2nd Function level
2nd Function level
appears on the display; laser is activated and
"1 ---" starts blinking.
Briefly press.
Value is accepted and on the display "2 ---" starts blinking.
Trigger measurement; do not move the
instrument!
Value is accepted.
appears on the display and "3 ---" starts blinking.
Press, a continuous measurement is triggered.
Move the Leica DISTO™ plus a large amount around the
ideal measurement point.
Stop of continuous measurement. The height
and width are displayed between point 1 and 2
(Pythagoras).
10
If Bluetooth® is switched on, this icon appears in
the display.
The data connection must be built up by the application
software on a Pocket PC or PC. As long as the connection
is being built up, this icon will be blinking.
If during 120 seconds after switching on the
Bluetooth® no connection is established with the Pocket
PC or PC, then the Bluetooth® is switched off automatically.
Leica DISTO™ plus 1.0.0 GB
Switching off the Bluetooth®
The direction arrows
Press the arrow key briefly. A a thin line will be
drawn to scale.
Before switching off the Bluetooth® , always
change to the first function level
Briefly press.
de
Transfer of the measured values
GB
Bluetooth® is switched off,when this icon is no
longer visible
If still in the second function level, the Bluetooth®
cannot be swictched off. This is a safety precaution to
prevent an accidential interruption of the Bluetooth®
connection.
Before the Leica DISTO™ plus can be switched off, the
Bluetooth® function has to be switched off.
fr
D5-Z14
The eigth arrow keys below the Leica DISTO™ plus
keyboard are used to input directions (orthogonal and
diagonal) when generating a spatial drawing.
Trigger a measurement in the usual way (even if the
second level is active, these keys remian functional), the
value appears in the display. Select the arrow key that
corresponds to the direction needed for your spatial
drawing. When this arrow key is pressed, the distance is
transferred according to value and direction to the data
receiver (Pocket PC or PC).
Depending on the software used, the arrow keys can also
control the cursor (e.g. Excel).
D5-Z15
Confirmation (or deletion) of a transferred measuring value
it
es
nl
D5-Z16
Leica DISTO™ plus 1.0.0 GB
11
2nd Function level
ja
de
Press briefly to confirm that the correct line was
drawn. The line is then drawn thicker with the
measurement dispayed.
Press briefly to clear a wrong line.
GB
fr
Is the measurement is still displayed in the Leica DISTO™
plus, it can be transferred again by pressing the correct
arrow key.
Other functions are described in the manual of the
software used.
During data transfer
it
es
As long as there is no confirmation of a successful data
transfer from the Pocket PC or PC, no new measurement
can be triggered.
Appears and "240" blinks, if after 2 seconds no
data transfer occurs.
Press briefly to acknowledge the display. Repeat
measurement and data transfer.
nl
Remark to the software
The two free software progams "plus-draw" and "plus-XL"
are included to demonstrate the basic applications of the
Leica DISTO™ plus and are designed to perform simple
ja
User Information
tasks (spatial drawings with measurements , data transfer
into an Excel table etc.)
Leica Geosystems gives no warranty on the free software
nor on their functionality and does not offer any support.
Leica Geosystems is not liable for any damage resulting
from the use of the free software and is not obligated to
make corrections on them or to develop additional
functions for them (updates, upgrades etc.).
There are a number of commercially available software
programs that provide the required functions. Please visit
our homepage www.disto.com for details.
User Information
Range
In daylight (outdoors) always work with a laser viewfinder
(see page 13). If neceesary, shade the target. If required,
use a target plate.
Increased range:
At night, at dusk and when target area is in the shade.
12
Reduced range / increased measuring time:
Against mat and dark surfaces (also plants and trees) a
reduction of the range may occur as well as an increase in
measuring time.
Rough surfaces
On a rough surface (e.g. coarse plaster) measure against
the centre of the illuminated area.
To avoid measuring to the bottom of plaster joints:
Use target plate, 3M "Post-it" or board.
Transparent surfaces
To avoid measuring errors, do not measure towards
colorless liquids (e.g. water) or (dust free) glass, styropor.
or similar semi- permeable surfaces. For materials and
liquids unfamiliar to you always take a trial measurement.
When aiming through panes of glass, of if there
are several objects in the line-of-sight erroneous measurements can occur.
Leica DISTO™ plus 1.0.0 GB
Wet, smooth or high-gloss surfaces
1 Aiming at a "Acute" angle deflects the laser beam. The
Leica DISTO™ plus may receive a signal that is too
weak (error message 255).
2 If aiming at a right angle, the Leica DISTO™ plus may
receive a signal that is too strong (error message 256).
With measurements from a distance of 25 m the laser spot
is in the centre of the crosshairs. Below a distance of 25 m
the laser spot moves to the edge of the crosshairs.
Inclined, round surfaces
Can be measured with the laser.
Requirement: There is enough area on the target surface
for the laser spot.
D5 Z_telescop
Using a target plate
Use target plates 563875 (DIN C6) or 723385 (DIN A4’), if
the signal is too weak (e 255), if the targeted surface is too
rough, if the surface has poor reflection or during dayligh
when measuring from more than 30 meters away.
• White surfaces: to up approx. 30 m
• Brown surfaces: from approx. 30m to 200 m
In the field
Leica DISTO™ plus is equipped with an integrated
telescopic viewfinder (2x magnification).
Leica DISTO™ plus 1.0.0 GB
13
de
Technical Data
Measuring accuracy
typ.: ± 1.5mm / max.: ± 3mm*
(2x standard deviation)
Smallest unit displayed
1mm**
Range (from about 30m, use
0.2m
up to 200 m
target plate)
Time for a measurement dist / trc 0.5...ca.4s / 0.16...ca.1s
∅ Laser spot (at distance)
6 / 30 / 60 mm (10 / 50 / 100 m)
Integrated telescopic viewfinder
Illumination
Multiline display
Multifunctional bumper
Time delay release
Pocket calculator
®
Bluetooth
Tracking
Constant
10 values
min./ max. Tracking.
Pythagoras
Mermory (Stack)
15 values
Battery, Type AA, 2x 1.5V
up to 10’000 measurements ***
(only with Alkaline batteries!)
Splash and dustproof
IP54 acc. IEC529: splash and
dustproof
Dimension and weight
172 x 73 x 45 mm, 335g
Measuring accuracy of bubble
1°
Temperature range
Storage
-25°C to +70°C
(-13°F to +158°F)
Operating
-10°C to +50°C
(-14°F to +122°F)
Technical Data
GB
fr
it
es
nl
ja
de
Maximum deviation occurs under unfavorable conditions, such as in bright sunlight or when measuring to
inadequately reflecting surfaces. For distances over
30m-without using a target plate- themaximum deviation may increase by ±0.1mm to maximum ± 10mm.
For more information, refer to www.disto.com.
GB
**
As of 100m the measuring units are displayed in cm.
*** Reduced when using the
fr
Bluetooth® function
Message Codes
Error message
it
appears beside the message number on the
display.
Message
Code
es
203
204
240
252
nl
ja
253
Cause
Remedy
Wrong sequence with
Pythagoras meas.
Calculation error
Transmission error
Temperature too high,
above 50°C (measuring)
Temperature too low,
below -10°C (measuring)
Carry out measurement in
correct sequence
Repeat procedure
Repeat procedure
Cool down instrument
Message Codes
Message
Code
255
256
257
260
Cause
Remedy
Receiver signal too weak,
measurement time too
long, distance <200 mm
Received signal too
powerful
Wrong measurement,
ambient brightness too
high
Laser beam interrupted
All other messages
Use target plate
measurement time >10
sec.
Use target plate (correct
side)
Use target plate
Repeat measurement
Call service "System"
Please call your local dealership and specify the
message code. Should the message continue to
appear after several starts, then the instrument
is defective.
Care
Look after the optical surfaces with the same care that you
would apply to spectacles, cameras and field glasses.
The most current information can be found on our
homepage:
www.disto.com
We publish the addresses of specialized software
mannufacturers . However, we are not responsible for the
correctness of their specifications or for the performance
of their software.
For software developers, the Leica DISTO™ plus OnlineInterface description is available.
All illustrations, descriptions and technical specifications are subject to change without prior notice.
Warm up instrument
14
Leica DISTO™ plus 1.0.0 GB

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:11:03 10:26:11+01:00
Create Date                     : 2003:10:23 10:07:41Z
Page Count                      : 13
Creation Date                   : 2003:10:23 10:07:41Z
Mod Date                        : 2003:11:03 10:26:11+01:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : ROG
Metadata Date                   : 2003:11:03 10:26:11+01:00
Creator                         : ROG
Title                           : Daumenregister.fm
Page Mode                       : UseNone
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RFFCPD0401

Navigation menu