Leica Geosystems CPD CPD0401 Bluetooth Laser Distancemeter User Manual SafetyManuals

Download:
Mirror Download [FCC.gov]
Document ID	400225
Application ID	tH/0LKqUC3A6sL2LNY6HfA==
Document Description	Users Manual Safety Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	71.87kB (898321 bits)
Date Submitted	2004-03-01 00:00:00
Date Available	2004-03-01 00:00:00
Creation Date	2003-11-10 12:06:55
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-02-06 10:34:01
Document Title	SafetyManuals.book
Document Creator	FrameMaker 7.0
Document Author:	rog

Safety Instructions
Version 1.0
English
Important paragraphs which must be adhered to in
practice as they enabled the product to be used in a technically correct and efficient manner.
The User Manual (part2) in a separate
brochure, forms a part of the safety
instructions.
Carefully read the User Manual before using
this product.
The following directions should enable the person
responsible for the Leica DISTO™, and the person who
actually uses the instrument, to anticipateand avoid
operational hazards.
The person responsible for the instrument must ensure that
all users understand these directions and adhere to them.
Use of the instrument
Symbols used
•
•
•
•
•

"
The symbols used in the User Manual have the following
meanings:
WARNING:
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, will result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, may result in minor
injury and/or in appreciable material, financial and
environmental damage.
Leica DISTO™ GB
Permitted use
The permitted use of the Leica DISTO™ are the following:
• Measuring distances
• Computing areas and volumes
• Storing measurements (BLUETOOTH®)
Prohibited use
•
•
•
•
•
Using the instrument without instruction
Using outside the stated limits
Deactivation of safety systems and removal of
explanatory and hazard labels
Opening of the equipment by using tools (screwdrivers,
etc.), as far as not specifically permitted for certain
cases
Carrying out modification or conversion of the product
Use after misappropriation
Use of accessories from other manufacturers without
the express approval of Leica Geosystems.
Deliberate or irresponsible behaviour on scaffolding,
when using ladders, when measuring near machines
which are running, or near parts of machines or
installations which are unprotected
Aiming directly into the sun
Deliberate dazzling of third parties; also in the dark
•
Inadequate safeguards at the surveying site (e.g. when
measuring on roads, etc.)
WARNING
Prohibited use can lead to injury, malfunction, and
material damage. It is the task of the person responsible for
the instrument to inform the user about hazards and how to
counteract them. The Leica DISTO™ is not to be operated
until the user has been instructed.
Limits of use
See section “Technical Data“.
Environment:
Suitable for use in an atmosphere appropriate for permanent
human habitation. Cannot be used in an aggressive or
explosive* environment. Use in rain is permissible for limited
periods.
* Potentially explosive atmospheres:
Areas with potentially explosive atmospheres are often,
but not always clearly marked. They include fuelling
area, such as petrol stations, below deck on boats, fuel
or chemical transfer facilities, and areas where the air
contains chemcals or particles, such as grain, dust or
metal powder.
de
GB
fr
it
es
pt
nl
da
sv
no
fi
ja
zh
ko
pl
hr
hu
ru
cz
el
lt
lv
et
si
sl
ml
tr
de
GB
fr
it
es
pt
nl
da
sv
no
fi
ja
zh
ko
pl
hr
hu
ru
cz
el
lt
lv
et
si
sl
ml
tr
Areas of responsibility
Responsibilities of the manufacturer of the original
equipment Leica Geosystems AG, CH-9435 Heerbrugg
(kurz Leica Geosystems):
Leica Geosystems is responsible for supplying the product,
including the User Manual and original accessories, in a
completely safe condition.
Responsibilities of the manufacturer of non-Leica
accessories:
The manufacturers of non-Leica accessories for
the Leica DISTO™ are responsible for developing, implementing and communicating safety concepts for their
products. They are also responsible for the effectiviness of
these safety concepts in combination with the Leica Geosystems equipment.
Responsibilities of the person in charge of the
instrument:
WARNING:
The person responsible for the instrument must
ensure that the equipment is used in accordance with the
instructions. This person is also accountable for the
deployment of personnel and for their training and for the
safety of the equipment when in use.
The person in charge of the instrument has the following
duties:
• To understand the safety instructions on the product
•
•
and the instructions in the User Manual.
To be familiar with local safety regulations relating to
accident prevention.
To inform Leica Geosystems immediately if the
equipment becomes unsafe.
Hazards in use
Important hazards in use
WARNING:
The absence of instruction, or the inadequate
imparting of instruction, can lead to incorrect or prohibited
use, and can give rise to accidents with far-reaching human,
material and environmental consequences.
Precautions:
All users must follow the safety instructions given by the
manufacturer and the directions of the person responsible for
the instrument.
CAUTION:
Watch out for erroneous distance measurements if
the instrument is defective or if it has been dropped or has
been misused or modified.
Precautions:
Carry out periodic test measurements. Particularly after the
instrument has been subject to abnormal use, and before,
during and after important measurements.
Make sure the Leica DISTO™ optics is kept clean and that
there is no mechanical damage to the bumpers.
WARNING:
Insufficient securing or marking of your
measurement site could cause a dangerous situation on the
public highway, building site, or in the factory, etc.
Precautions:
Always ensure your measurement site is appropriately
secured. Obey the local accident prevention regulations, and
road safety rules, at all times.
CAUTION:
In using the instrument for distance measurements
or for positioning moving objects (e.g. cranes, building
equipment, platforms, etc.) unforeseen events may cause
erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as a control
device. Your system must be configured and operated in
such a way, that in case of an erroneous measurement,
malfunction of the device or power failure due to installed
safety measures (e.g. safety limit switch), it is assured that no
damage will occur.
WARNING:
Dispose of the equipment appropiately in
accordance with the regulations in force in your country.
Always prevent access to the equipment by unauthorized
personnel.
CAUTION:
Be careful when pointing a telescope towards the
sun, because the telescope functions as a burning glass and
Leica DISTO™ GB
can injure your eyes and/or cause damage inside the Leica
DISTO™.
Precautions:
Do not point the telescopic viewer directly at the sun.
Laser classification
The Leica DISTO™ produces a visible laser beam which
emerges from the front of the instrument.
It is a Class 2 laser product in accordance with:
• IEC60825-1 : 1993 "Radiation safety of laser products"
• EN60825-1 : 1994 "Radiation safety of laser products"
It is a Class II laser product in accordance with:
• FDA 21CFR Ch.I §1040 : 2003 (US Department of
Health and Human Service, Code of Federal
Regulations)
Laser Class 2/ II products:
Do not stare into the laser beam or direct it towards other
people unnecessarily. Eye protection is normally afforded by
aversion responses including the blink reflex.
WARNING:
Looking directly into the beam with optical aids (e.g.
binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to
the eyes.
Leica DISTO™ GB
Precautions:
Do not look into the laser beam. Make sure the laser is aimed
above or below eye level. (particularly with fixed installations,
in machines, etc.)
WARNING:
Looking right at the reflected laser beam in a Leica
DISTO™ operated with telescopic viewfinder could be
dangerous when you aim at areas that reflect like a mirror, or
emit reflections unexpectedly (e.g. a mirror, metallic
surfaces, windows, prisms, liquids).
Precautions:
If you are using a telescopic viewfinder, do not aim at areas
that are reflective like a mirror, or which could produce
unintended reflections (e.g. mirrors, metallic surfaces,
windows, prisms).
Electromagnetic Compatibility(EMC)
The term "electromagnetic compatibility" is taken to mean the
capability of the Leica DISTO™ to function smoothly in an
environment where electromagnetic radiation and
electrostatic discharges are present, and without causing
electromagnetic interference to other equipment.
WARNING:
Electromagnetic radiation can cause interference in
other equipment.
Although the Leica DISTO™ meets the strict regulations and
standards which are in force in this respect, Leica
Geosystems cannot completely exclude the possibility that
interference may be caused to other equipment.
Use of the product with BLUETOOTH®:
WARNING:
Electromagnetic radiation can cause disturbances in
other equipment, in installations (e.g. medical ones such as
pacemakers or hearing aids) and in aircraft. It can also affect
humans and animals.
Precautions:
Athough this product conforms to the most stringent
standards and regulations, Leica Geosystem cannot totally
exclude the possibility of harm to people and animals.
• Do not use the product near petrol stations, chemical
plants, in areas with a potentially explosiveatmosphere
and where blasting takes place.
• Do not use the product near medical equiment.
• Do not use the product in airplanes.
• Do not use the product near your body for extended
periods.
WARNING:
This BLUETOOTH® transmitter must not be
operated in conjunction with any other transmitter or
transmitting antenna.
de
GB
fr
it
es
pt
nl
da
sv
no
fi
ja
zh
ko
pl
hr
hu
ru
cz
el
lt
lv
et
si
sl
ml
tr
de
GB
fr
it
es
pt
nl
da
sv
no
fi
ja
zh
ko
pl
hr
hu
ru
cz
el
lt
lv
et
si
sl
ml
tr
FCC statement (applic. in U.S.)
WARNING:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
Changes or modifications not expressly approved by
Leica Geosystems for compliance could void the user’s
authority to operate the equipment.
Product labelling:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Leica DISTO™ GB
Labelling
Maximum radiant power:
Emitted wavelength:
Standard applied:
0.95mW
620-690nm
EN60825-1: 1994
IEC60825-1: 1993
D5-Z5
D5-Z1
Laser beam outlet
Beam divergence
0.16 x 0.6 mrad
Pulse duration
15 x 10-9 s
Max. radiant power
0.95 mW *
Max. radiant power per pulse
8 mW
* Measurement accuracy ±5%
CAUTION:
In case of damage, contact the local dealership.
Never attempt to repair the product yourself.
D5-Z2
D5-Z4
D5-Z3
Leica DISTO™ GB
de
GB
fr
it
es
pt
nl
da
sv
no
fi
ja
zh
ko
pl
hr
hu
ru
cz
el
lt
lv
et
si
sl
ml
tr

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:02:06 10:34:01+01:00
Create Date                     : 2003:11:10 12:06:55Z
Page Count                      : 5
Creation Date                   : 2003:11:10 12:06:55Z
Mod Date                        : 2004:02:06 10:34:01+01:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rog
Metadata Date                   : 2004:02:06 10:34:01+01:00
Creator                         : rog
Title                           : SafetyManuals.book
Page Mode                       : UseNone
Has XFA                         : No

EXIF Metadata provided by EXIF.tools