Leica Geosystems CPD LD1BT Leica DISTO E7100i User Manual E7100i e7100i en
Leica Geosystems AG, CPD Leica DISTO E7100i E7100i e7100i en
Contents
- 1. 15_Leica DISTO E7100i UserMan
- 2. 15_Leica DISTO Sigma3 UserMan
- 3. 15_Leica DISTO Sigma3 UserMan-Safety
- 4. 15a_Leica DISTO Sigma 3_LD 250 BT UserMan
15_Leica DISTO E7100i UserMan
Leica DISTOTM E7100i The original laser distance meter Table of Contents EN Instrument Set-up -------------------------Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Attach / Remove clip - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Unit setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Measuring Functions - - - - - - - - - - - - - - - - - - - - - - - Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - Permanent measuring - - - - - - - - - - - - - - - - - - - - - - - - - - - - Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bluetooth® Smart- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Care - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Disposal Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - 10 FCC statement (applicable in U.S.) - - - - - - - - - - - - - - - - - - - 10 Use of the product with Bluetooth® - - - - - - - - - - - - - - - - - - - 11 Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 ------------------------------------- 8 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - Symbols used - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Leica DISTOTM E7100i 812795b Instrument Set-up Introduction EN Overview The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them. The symbols used have the following meanings: Display WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury. CAUTION Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or appreciable material, financial and environmental damage. Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. On/Measure Area / Units Bluetooth® Clear / Off Leica DISTOTM E7100i 812795b Instrument Set-up Display EN Insert batteries Info Battery Bluetooth® Area +Main line To ensure a reliable use, do not use zinc-carbon batteries. Change batteries when battery symbol is flashing. - + Units Attach / Remove clip click! Leica DISTOTM E7100i 812795b Operations Switching ON/OFF ON EN Clear OFF 2 sec Device is turned OFF. Press ON button 2 sec to start continuous laser mode. Message Codes 1x Undo last action. 2x If the message "InFo" appears with a number, observe the instructions in "Message Codes" section. Example: Leave actual function, go to default operation mode. Unit setting Switch between the following units: 2 sec 0.000 m 0.0000 m 0.00 ft 0‘00‘‘ 1/32 0 in 1/32 Leica DISTOTM E7100i 812795b Measuring Functions Measuring single distance EN 8.532 m Aim active laser at target. Target surfaces: Measuring errors can occur when measuring to colourless liquids, glass, styrofoam or permaeble surfaces or when aiming at high gloss surfaces. Against dark surfaces the measuring time increases. Permanent measuring The last value measured is displayed. 2 sec Stops permanent measuring. 8.532 m Aim active laser at target. Area Aim laser at first target point. Leica DISTOTM E7100i 812795b Aim laser at second target point. 24.352 m Measuring Functions Bluetooth® Smart EN 2 sec I8.462 m2 Value from mainline is transferred Deactivate/Activate Bluetooth® App Mode: Use this mode to transfer the data using an App. Bluetooth® Smart is always active when the device is switched on. Connect the device with your smart-phone, tablet, laptop,… Measurement values will be transferred automatically right after a measurement. To tranfer a result from the main line, press the Bluetooth® key. Bluetooth® switches off as soon as the laser distance meter is switched off. The efficient and innovative Bluetooth® Smart module (with the new Bluetooth® standard V4.0) works together with all Bluetooth® Smart Leica DISTOTM E7100i 812795b Ready devices. All other Bluetooth® devices do not support the energy saving Bluetooth® Smart Module, which is integrated in the device. We provide no warranty for free DISTO™ software and offer no support for it. We accept no liability whatsoever arising from the use of the free software and we are not obliged to provide corrections nor to develop upgrades. A wide range of commercial software can be found on our homepage. Apps for Android® or iOS can be found in special internet shops. For more details, see our homepage. Technical Data EN General Typical Measuring Tolerance* Maximum Measuring Tolerance** Range at Leica target plate GZM26 Typical Range* Range at unfavourable condition **** Smallest unit displayed Power Range Technology™ Laser class Laser type Ø laser point at distances Protection class Autom. laser switch off Autom. power switch-off Bluetooth® Smart Range of Bluetooth® Battery durability (2 x AAA) Dimension (H x D x W) Weight (with batteries) Temperature range: - Storage - Operation ± 1.5 mm / ± 0.06 in *** ± 3.0 mm / 0.12 in *** 70 m / 230 ft 0.2-60 m / 0.6-200 ft 30 m / 98 ft 0.1 mm / 1/32 in yes 635 nm, < 1 mW 6 /30 / 60 mm 10 / 50 / 100 m IP54 (dust- and splash water protected) after 90 s after 180 s Bluetooth v4.0 10 m up to 5000 measurements 120 x 37 x 23 mm 4.72 x 1.46 x 0.91 in 92 g / 3.25 oz * applies for 100 % target reflectivity (white painted wall), low ambient light, 25 ºC ** applies for 10 to 500 % target reflectivity, high ambient light, - 10 ºC to + 50 ºC *** Tolerances apply from 0.2 m to 5 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m. At unfavorable conditions such as bright sunlight, targets with poor reflectivity, or high or low temperatures, the maximum tolerance may deteriorate to 0.15 mm/m above 5m. **** applies for 100 % target reflectivity, background illumination of approximately 30'000 lux Functions Distance measuring yes Permanent measuring yes Area yes Beep yes Bluetooth® Smart yes Illuminated display yes -25 to 70 °C -13 to 158 °F -10 to 50 °C 14 to 122 °F Leica DISTOTM E7100i 812795b Message Codes Care Warranty If the message Error does not disappear after switching on the device repeatedly, contact the dealer. If the message InFo appears with a number, press the Clear button and observe the following instructions: • Clean the device with a damp, soft cloth. • Never immerse the device in water. • Never use aggressive cleaning agents or solvents. No. Cause Correction 204 Calculation error Perform measurement again. CAUTION Lifetime Manufacturer's Warranty Warranty coverage for the entire usage time of the product according to Leica Geosystems International Limited Warranty. Free of charge repair or replacement for all products that suffer defects as a result of faults in materials or manufacturing, for the entire life of the product. 3 Years no Cost Guaranteed service should the product become defective and require servicing under normal conditions of use, as described in the user manual, at no additional charge. 240 Data transfer error Repeat procedure. 252 Temperature too high Let device cool down. 253 Temperature too low Warm device up. 254 Battery voltage too low for measurements Change batteries. 255 Received signal too weak, measuring time too long Change target surface (e.g. white paper). 256 Received signal too high Change target surface (e.g. white paper). 257 Too much background light Shadow target area. 258 Measurement outside of Correct range. measuring range 260 Laser beam interrupted Repeat measurement. Leica DISTOTM E7100i 812795b Disposal Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations. The product must not be disposed with household waste. Dispose of the product appropriately in accordance with the national regulations in force in your country. Adhere to the national and country specific regulations. Product specific treatment and waste management can be downloaded from our homepage. EN To receive the "3 years no cost" period, the product must be registered at www.leicageosystems.com/registration within 8 weeks of the purchase date. If the product is not registered, a "2 years no cost" period applies. Safety Instructions The person responsible for the instrument must ensure that all users understand these directions and adhere to them. Symbols used The symbols used have the following meanings: WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury. CAUTION Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or appreciable material, financial and environmental damage. Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Leica DISTOTM E7100i 812795b EN Permitted use Hazards in use • Measuring distances WARNING Prohibited use • Using the product without instruction • Using outside the stated limits • Deactivation of safety systems and removal of explanatory and hazard labels • Opening of the equipment by using tools (screwdrivers, etc.) • Carrying out modification or conversion of the product • Use of accessories from other manufacturers without express approval • Deliberate dazzling of third parties; also in the dark • Inadequate safeguards at the surveying site (e.g. when measuring on roads, construction sites, etc.) • Deliberate or irresponsible behaviour on scaffolding, when using ladders, when measuring near machines which are running or near parts of machines or installations which are unprotected • Aiming directly in the sun Watch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified. Carry out periodic test measurements, particularly after the instrument has been subject to abnormal use, and before, during and after important measurements. CAUTION Never attempt to repair the product yourself. In case of damage, contact a local dealer. WARNING Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user’s authority to operate the equipment. Limits of use Refer to section "Technical data". The device is designed for use in areas permanently habitable by humans. Do not use the product in explosion hazardous areas or in aggressive environments. Safety Instructions Areas of responsibility Responsibilities of the manufacturer of the original equipment: Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Internet: www.disto.com The company above is responsible for supplying the product, including the User Manual in a completely safe condition. The company above is not responsible for third party accessories. Responsibilities of the person in charge of the instrument: • To understand the safety instructions on the product and the instructions in the User Manual. • To be familiar with local safety regulations relating to accident prevention. • Always prevent access to the product by unauthorised personnel. Leica DISTOTM E7100i 812795b EN Electromagnetic Compatibility (EMC) WARNING The device conforms to the most stringent requirements of the relevant standards and regulations. However, the possibility of causing interference in other devices cannot be totally excluded. FCC statement (applicable in U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: • This device may not cause interference and • this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme à la section 15 des règlements FCC. Son fonctionnement est soumis aux deux conditions suivantes : • cet appareil ne doit pas causer d'interférences nuisibles, et • cet appareil doit accepter toute autre interférence reçue, y compris les inter- 10 Safety Instructions férences pouvant entraîner un fonctionnement non désiré. Ce dispositif est conforme à la norme RSS210 d’Industrie Canada. L’utilisation est sujette aux deux conditions suivantes : • ce dispositif ne pas doit pas être la source d’interférences nuisibles, et • ce dispositif doit accepter toutes les interférences, y compris les interférences pouvant induire des opérations non souhaitées. Use of the product with Bluetooth® WARNING Electromagnetic radiation can cause disturbances in other equipment, in installations (e.g. medical ones such as pacemakers or hearing aids) and in aircraft. It can also affect humans and animals. Precautions: Athough this product conforms to the most stringent standards and regulations, the possibility of harm to people and animals cannot totally excluded. • Do not use the product near petrol stations, chemical plants, in areas with a potentially explosive atmosphere and where blasting takes place. • Do not use the product near medical equipment. • Do not use the product in airplanes. Leica DISTOTM E7100i 812795b EN • Do not use the product near your body for extended periods. Labelling Laser classification Laser Radiation Do not stare into the beam Laser class 2 acc. IEC 60825-1:2007 Maximum radiant power: <1mW Emitted wavelength: 620-690nm Beam divergence: 0.16 x 0.6 mrad Impulse duration: 0.2 x 10-9s - 0.8 x 10-9s The device produces visible laser beams, which are emitted from the instrument: It is a Class 2 laser product in accordance with: • IEC60825-1 : 2007 „Radiation safety of laser products“ Laser Class 2 products: Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex. WARNING Looking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Subject to change (drawings, descriptions and technical data) without prior notice. 11 Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001). Total Quality Management - Our commitment to total customer satisfaction. Ask your local Leica Geosystems agent for more information about our TQM program. Copyright Leica Geosystems AG, Heerbrugg, Switzerland 2014 Original text (812795b EN) Pat. No.: Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) www.disto.com WO 9427164, WO 9818019, WO 0244754, WO 0216964, US 5949531, EP 1195617, US 7030969, WO 03104748, EP2589980
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : rog Create Date : 2013:09:21 12:26:10Z Modify Date : 2014:05:08 15:19:14+02:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : rog Title : E7100i.book(e7100i_en.fm) Creator Tool : FrameMaker 9.0 Metadata Date : 2014:05:08 15:19:14+02:00 Producer : Acrobat Distiller 10.1.8 (Windows) Document ID : uuid:10a233de-181b-475f-bc67-c3eef9635b3b Instance ID : uuid:ef3c69ef-c0bc-483c-acd2-6e897fa48658 Page Mode : UseOutlines Page Count : 13EXIF Metadata provided by EXIF.tools