Lenovo Tab7 Hmm V1.0 201708 HMM_EN User Manual Hardware Maintenance Tab 7 (Lenovo TB 7504F/X) (TB 7504F, 7504X)
Tab 7 - Hardware Maintenance Manual tab7_hmm_en User Guide for Lenovo Tablet and eReader, Free Instruction Manual - 2
2017-09-25
User Manual: Lenovo Tab7 Hmm V1.0 201708 Hardware Maintenance Manual - Lenovo Tab 7 (Lenovo TB-7504F/X) TAB 7 (TB-7504F, TB-7504X) TAB 7 (TB-7504F, TB-7504X)
Open the PDF directly: View PDF 
.
Page Count: 60
| Download | |
| Open PDF In Browser | View PDF |
Lenovo TAB 7 Lenovo TB-7504F Lenovo TB-7504X Hardware Maintenance Manual Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 54. First Edition (August 2017) © Copyright Lenovo 2017. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclo‐ sure is subject to restrictions set forth in Contract No. GS‐35F‐05925. © 2017 Lenovo Contents About this manual........................................iv Trademarks .........................................................55 Safety information.........................................1 General safety....................................................... 2 Electrical safety .................................................... 3 Safety inspection guide....................................... 5 Handling devices that are sensitive to electro‐ static discharge..................................................... 6 Grounding requirements.................................... 6 Safety notices: multilingual translations .......... 7 Laser compliance statement ............................. 14 Important service information ...................16 Strategy for replacing FRUs ............................. 16 Important notice for replacing a main board 17 Important information about replacing RoHS compliant FRUs.................................................. 18 General checkout ........................................19 What to do first .................................................. 20 Power system checkout .................................... 21 Checking the Tab AC Charger................... 21 Checking the internal battery status ......... 21 Related service information .......................23 Security................................................................ 23 Power management........................................... 23 Activating/Deactivating the Display ........ 23 Lenovo TAB 7 ..............................................24 FRU replacement notices .................................. 25 Screw notices ................................................ 25 Removing and replacing an FRU .................... 26 1010 Back Cover........................................... 27 1020 Battery .................................................. 29 1030 Sub Board............................................. 32 1040 Main FPC ............................................. 34 1050 Rear Camera ........................................ 38 1060 Sidekey ................................................. 40 1070 Speaker Box ......................................... 42 1080 Main Board .......................................... 44 1090 Front Camera....................................... 47 Locations ............................................................. 49 Parts list............................................................... 50 Overall........................................................... 51 AC Adapter .................................................. 53 Screw ............................................................. 53 Others ............................................................ 53 Notices .........................................................54 iii Lenovo TAB 7 Hardware Maintenance Manual About this manual This manual contains service and reference information for the following Lenovo product: Lenovo TAB 7 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product‐specific section includes service, reference, and product‐specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16. iv Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1 Lenovo TAB 7 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe. • Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position. • Place removed covers and other parts in a safe place, keeping them away from all personnel, while you are servicing the machine. • Keep your tool case away from walk areas so that other people will not trip it over. • Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it. • Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end. • Do not wear jewelry, chains, metal‐frame eyeglasses, or metal fasteners for your clothing. Attention: Metal objects are good electrical conductors. • Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes. • After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. • Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. 2 Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock. • Find the room emergency power‐off (EPO) switch, disconnecting the switch or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly. • Do not work alone under hazardous conditions or near the equipment that has hazardous voltages. • Disconnect all power before: – Performing a mechanical inspection – Working near power supplies – Removing or installing main units • Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power‐off the wall box that supplies power to the machine, and to lock the wall box in the off position. • If you need to work on a machine that has exposed electrical circuits, observe the following precautions: – Ensure that another person, familiar with the power‐off controls, is near you. Attention: Another person must be there to switch off the power, if necessary. – Use only one hand when working with powered‐on electrical equipment; keep the other hand in your pocket or behind your back. Attention: An electrical shock can occur only when there is a complete circuit. By observing the above rule, you may prevent a current from passing through your body. – When using testers, set the controls correctly and use the approved probe leads and accessories for that tester. – Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames. Observe the special safety precautions when you work with very high voltages; instructions for these precautions are in the safety sections of maintenance information. Be extremely careful when you measure the high voltages. • Regularly inspect and maintain your electrical hand tools for safe operational condition. • Do not use worn or broken tools and testers. • Never assume that power has been disconnected from a circuit. First, check it to make sure that it has been powered off. 3 Lenovo TAB 7 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Caution: do not become a victim yourself. – Switch off the power. – Send the victim to get medical aid. 4 Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards according to the attachment of non‐Lenovo features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: • Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock) • Explosive hazards, such as a damaged CRT face or a bulging capacitor • Mechanical hazards, such as loose or missing hardware To determine whether there are any potential unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected. Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Turn off the computer. Disconnect the power cord. 3. Check the power cord for: a. A third‐wire ground connector in good condition. Use a meter to measure third‐wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground. b. The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non‐Lenovo alterations. Use good judgment as to the safety of any non‐Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables. 9. Check that the power‐supply cover fasteners (screws or rivets) have not been removed or tampered with. 5 Lenovo TAB 7 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product‐specific ESD procedures when they exceed the requirements noted here. 2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD‐sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. • Wear a grounded wrist strap against your skin to eliminate static on your body. • Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. • Use the black side of a grounded work mat to provide a static‐free work surface. The mat is especially useful when handling ESD‐sensitive devices. • Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Notes: The use of a grounding system to guard against ESD damage is desirable but not necessary. – Attach the ESD ground clip to any frame ground, ground braid, or green‐ wire ground. – When working on a double‐insulated or battery‐operated system, use an ESD common ground or reference point. You can use coax or connector‐ outside shells on these systems. – Use the round ground prong of the ac plug on ac‐operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. 6 Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts. Avant de remettre l’ordinateur sous tension après remplacement d’une unité en clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et bien fixées. Pour ce faire, secouez l’unité et assurez‐vous qu’aucun bruit suspect ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer un court‐circuit. Bevor nach einem FRU‐Austausch der Computer wieder angeschlossen wird, muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf Klappergeräusche geprüft werden. Metallteile oder‐ splitter können Kurzschlüsse erzeugen. Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni siano nella corretta posizione e non siano sparse all’interno dell’elaboratore. Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori; eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi. Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden causar cortocircuitos eléctricos. 7 Lenovo TAB 7 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short‐circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. Certaines batteries de secours contiennent du nickel et du cadmium. Ne les démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne les mettez pas en court‐circuit. Pour les mettre au rebut, conformez‐vous à la réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre feu ou d’exploser. Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Bereitschafts‐oder Systembatterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio. Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle. Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. 8 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short‐circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau. Ne la mettez pas en court‐circuit. Pour la mettre au rebut, conformez‐vous à la réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. En effet, une batterie inappropriée risque de prendre feu ou d’exploser. Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas al sustituir la batería. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. 9 Lenovo TAB 7 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie, d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau. Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile inappropriée risque de prendre feu ou d’exploser. Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato, smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi, incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. La batería de repuesto es una batería de litio y puede provocar incendios, explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado, ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga el contenido de sus celdas al agua. Deséchela tal como dispone la normativa local. 10 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez‐les abondamment pendant au moins quinze minutes. Consultez un médecin si des symptômes persistent après le lavage. Die Leuchtstoffröhre im LCD‐Bildschirm enthält Quecksilber. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der LCD‐Bildschirm besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden anschließend ein Arzt aufgesucht werden. Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i sintomi dovessero permanere. Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos como mínimo. Obtenga atención medica si se presenta algún 11 Lenovo TAB 7 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen. Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la parte inferiore della scheda invertitore. Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. Safety notice 7 DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. Bien que le voltage des batteries principales soit peu élevé, le court‐circuit ou la mise à la masse d’une batterie peut produire suffisamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves. Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu entzünden oder Verletzungen bei Personen hervorzurufen. Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in corto circuito o a massa può fornire corrente sufficiente da bruciare materiali combustibili o provocare ustioni ai tecnici di manutenzione. Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o con contacto a tierra puede producir la corriente suficiente como para quemar material combustible o provocar quemaduras en el personal. 12 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface. Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen, der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU entfernt wird. Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi di interconnessione. Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte cualquier cable de conexión entre dispositivos. 13 Lenovo TAB 7 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD‐ROM drive or a DVD‐ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products. If a CD‐ROM drive, a DVD‐ROM drive, or another laser device is installed, note the following: CAUTION Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles aqui especificados pode resultar em perigosa exposição à radiação. Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites. Werden Steuer‐ und Einstellelemente anders als hier festgesetzt verwendet, kann gefährliche Laserstrahlung auftreten. L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle specificate possono provocare l’esposizione a. El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí especificados puede provocar la exposición a radiaciones peligrosas. Opening the CD‐ROM drive, the DVD‐ROM drive, or any other optical storage device could result in exposure to hazardous laser radiation. There are no serviceable parts inside those drives. Do not open. 14 Safety information A CD‐ROM drive, a DVD‐ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz. Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder directement avec des instruments optiques, ou de vous exposer au rayon. Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente in den Laserstrahl sehen und den Strahlungsbereich meiden. Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai eszközökkel. Kerülje a sugárnyalábbal való érintkezést! Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio. Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el haz de luz. Evite la exposición directa al haz. 15 Lenovo TAB 7 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Important notice for replacing a main board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer‐installable. The BIOS and device drivers are posted on the customer support site: http://support.lenovo.com/. Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a main board is replaced, ensure that the latest BIOS is loaded to the main board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com/. 2. Enter a serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software. 16 Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a main board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect. Important notice for replacing a main board Some components mounted on a main board are very sensitive. Improper handling can cause damage to those components, and may cause a system malfunction. Attention: When handling a main board: • Do not drop the main board or apply any excessive force to it. • Avoid rough handling of any kind. • Avoid bending the main board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset. 17 Lenovo TAB 7 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, replacement parts can also be non-compliant. In all cases if the original FRU parts are RoHS compliant, the replacement part must also be RoHS compliant. Note: RoHS and non‐RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs. RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced with RoHS compliant ones, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used. Products marketed before June 2006 Products marketed after June 2006 Current or original part Replacement FRU Non‐RoHS Can be Non‐RoHS Non‐RoHS Can be RoHS Non‐RoHS Can sub to RoHS RoHS Must be RoHS Current or original part Replacement FRU Must be RoHS Must be RoHS Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order. 18 General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten. • Replace an FRU only with another FRU of the correct model. When you replace an FRU, make sure that the machine model and the FRU part number are correct by referring to the FRU parts list. • An FRU should not be replaced just because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing an FRU only when a problem recurs. If you suspect that an FRU is defective, clear the error logs and run the test again. If the error does not recur, do not replace the FRU. • Be careful not to replace a nondefective FRU. 19 Lenovo TAB 7 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. The following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subjected to stress beyond normal use. Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list: The following are not covered under warranty: • LCD panel cracked from the application of excessive force or from being dropped • Scratched (cosmetic) parts • Distortion, deformation, or discoloration of the cosmetic parts • Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force • Damage caused by liquid spilled into the system • Damage caused by the improper insertion of a PC Card or the installation of an incompatible card • Improper disk insertion or use of an optical drive • Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels • Damaged or bent diskette eject button • Fuses blown by attachment of a nonsupported device • Forgotten computer password (making the computer unusable) • Sticky keys caused by spilling a liquid onto the keyboard • Use of an incorrect AC adapter on laptop products The following symptoms might indicate damage caused by nonwarranted activities: • Missing parts might be a symptom of unauthorized service or modification. • If the spindle of a hard disk drive becomes noisy, it may have been subjected to excessive force, or dropped. 20 General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer. If you suspect a power problem, see the appropriate one of the following power supply checkouts: • “Checking the Tab AC Charger” on page 21 • “Checking the internal battery status” on page 21 Checking the Tab AC Charger When you use the IdeaTab AC Charger to charge the tablet but no power is charged, see the instructions in this topic to check the IdeaTab AC Charger. To check the IdeaTab AC Charger, do the following: 1. Disconnect the micro‐USB cable from the tablet. 2. Measure the output voltage across the connector marked B of the micro‐USB cable. Refer to the following figure: 12 3 (5V) Pin Voltage (V dc) 1 Ground 2 0 3 +5 Note: The output voltage across pin 3 of the micro‐B connector might be different from the one you are servicing. 3. If the voltage is not correct, replace the micro‐USB cable. 4. If the voltage is acceptable, replace the main board. Checking the internal battery status To check the battery status of the tablet, do either of the following: • Approximate information about the battery status Get the approximate status of the battery at any time by checking the battery status icon on the system bar in the upper‐right corner of the screen. The shorter the green bar is, the less the battery power remains. • Accurate information about the battery status To get the accurate information about the battery status of the tablet, do the following: 21 Lenovo TAB 7 Hardware Maintenance Manual 1.Open the Android Settings screen. To open the Android Settings screen, do either of the following: – – From the main Home screen, touch the Android Settings icon on Lenovo Launch Zone. The Android Settings screen is displayed. Touch the application icon from the action bar and then touch Settings. The Android Settings screen is displayed. 2.Touch About Tablet on the Android Settings screen. 3.Touch Status to view the accurate percentage of the remaining battery power. You also can touch Battery use to check what applications are consuming battery power. 22 Related service information Related service information This chapter presents the following information: • “Security” on page 23 • “Power management” on page 23 Security Security settings include: SCREEN SECURITY, SIM CARD LOCK (3G version only), PASSWORDS, DEVICE ADMINISTRATION and CREDENTIAL STORAGE. Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Activating/Deactivating the Display With the display deactivated, press the Power button on the tablet to activate the display. The display will then illuminate, indicating that it has been activated. If you do not need to use your tablet temporarily, you can press the Power button to deactivate the display. Your tablet will then enter standby mode to save power. 23 Lenovo TAB 7 Hardware Maintenance Manual Lenovo TAB 7 This chapter presents the following product‐specific service references and product‐specific parts information: • “FRU replacement notices” on page 25 • “Removing and replacing an FRU” on page 26 • “Locations” on page 49 • “Parts list” on page 50 24 Lenovo TAB 7 FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon‐coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten. • Each one should be used only once. Do the following when you service this machine: • Keep the screw kit in your tool bag. • Carefully remove screws for reuse when replacing FRUs. • Use a torque screwdriver if you have one. Tighten screws as follows: • Plastic to plastic Turn an additional 90° after the screw head touches the surface of the plastic part: more than 90° (Cross-section) • Logic card to plastic Turn an additional 180° after the screw head touches the surface of the logic card: more than 180° (Cross-section) • Torque driver If you have a torque screwdriver, refer to the “Torque” column for each step. • Make sure that you use the correct screws. If you have a torque screwdriver, tighten all screws firmly to the torque shown in the table. Never use a screw that you removed. Use a new one. Make sure that all screws are tightened firmly. • Ensure torque screwdrivers are calibrated correctly following country specifications. 25 Lenovo TAB 7 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 25. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts. 5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure. 6. When removing the FRU, move it in the direction as given by the arrow in the figure. 7. To put the new FRU in place, reverse the removal procedures and follow any of the notes that pertain to replacement. For information about connecting and arranging internal cables, see “Locations” on page 49. 8. When replacing an FRU, use the correct screw as shown in the procedures. DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any of the interconnecting cables. Attention: After replacing an FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits. Attention: The main board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or using an electrostatic discharge (ESD) strap (P/N 6405959) to remove potential shock reasons. 26 Lenovo TAB 7 1010 Back Cover Figure 1. Removal steps of back cover Open the SIM card slot cover and take out the SIM card tray. Using a disassembly tool, pry open the rear cover in the direction of the arrows, starting from the SIM card slot. 27 Lenovo TAB 7 Hardware Maintenance Manual Figure 1. Removal steps of back cover (continued) 28 Lenovo TAB 7 1020 Battery DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Back Cover” on page 27 Figure 2. Removal steps of battery Tear off the battery radiation film from the device slowly. Unscrew the three screws on the battery connector bracket and remove it. Step 1 Screw (quantity) Color Torque M1.4*3.0 (3) Silver 0.7N 29 Lenovo TAB 7 Hardware Maintenance Manual Figure 2. Removal steps of battery (continued) Disconnect the battery FPC in the direction of the arrow. Peel off and pull out the tear tape along the direction of the battery. Take out the battery. 30 Lenovo TAB 7 Figure 2. Removal steps of battery (continued) 31 Lenovo TAB 7 Hardware Maintenance Manual 1030 Sub Board For access, remove this FRU: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 3. Removal steps of sub board Disconnect the ends of the RF cable and remove the RF cable from the routing groove. Unscrew the screw on the sub board and remove the sub board. Step 1 32 Screw (quantity) Color Torque M1.4*3.0 (1) Silver 0.7N Lenovo TAB 7 Figure 3. Removal steps of sub board (continued) 33 Lenovo TAB 7 Hardware Maintenance Manual 1040 Main FPC For access, remove this FRU: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 4. Removal steps of main FPC Peel off the mylar on the main FPC connector. Disconnect the connectors on both ends of the main FPC. 34 Lenovo TAB 7 Figure 4. Removal steps of main FPC (continued) Pull out the FPC in the direction of the arrow. 35 Lenovo TAB 7 Hardware Maintenance Manual Figure 4. Removal steps of main FPC (continued) Remove the vibrator and MIC from the front cover. Slowly separate the main FPC from the front casing. 36 Lenovo TAB 7 Figure 4. Removal steps of main FPC (continued) Solder both the vibrator and the MIC off from the main FPC with a soldering iron at a temperature of 330‐350. 37 Lenovo TAB 7 Hardware Maintenance Manual 1050 Rear Camera For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 5. Removal steps of rear camera Disconnect the rear camera connector and remove the rear camera. 38 Lenovo TAB 7 Figure 5. Removal steps of rear camera (continued) 39 Lenovo TAB 7 Hardware Maintenance Manual 1060 Sidekey For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 6. Removal steps of sidekey Disconnect the sidekey connector and pull out the FPC. 40 Lenovo TAB 7 Figure 6. Removal steps of sidekey (continued) Remove the sidekey in the direction of the arrow. 41 Lenovo TAB 7 Hardware Maintenance Manual 1070 Speaker Box For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 7. Removal steps of speaker box Unscrew the five screws on the speaker box. Step 1 Screw (quantity) Color Torque M1.4*3.0 (5) Silver 0.7N Remove the speaker box in the direction of the arrow. 42 Lenovo TAB 7 Figure 7. Removal steps of speaker box (continued) 43 Lenovo TAB 7 Hardware Maintenance Manual 1080 Main Board Important notices for handling the main board: When handling the main board, bear the following in mind. • Be careful not to drop the main board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • Throughout the process, make sure not to drop or stack the main board. • If you put the main board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 • “1030 Sub Board” on page 32 • “1040 Main FPC” on page 34 • “1050 Rear Camera” on page 38 • “1060 Sidekey” on page 40 • “1070 Speaker Box” on page 42 Figure 8. Removal steps of main board Unscrew the screw on the main board. Step 1 44 Screw (quantity) Color Torque M1.4*3.0 (1) Silver 0.7N Lenovo TAB 7 Figure 8. Removal steps of main board (continued) Remove the main board in the direction of the arrow. Remove the sensor rubber. 45 Lenovo TAB 7 Hardware Maintenance Manual Figure 8. Removal steps of main board (continued) 46 Lenovo TAB 7 1090 Front Camera For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 • “1030 Sub Board” on page 32 • “1040 Main FPC” on page 34 • “1050 Rear Camera” on page 38 • “1060 Sidekey” on page 40 • “1070 Speaker Box” on page 42 • “1080 Main Board” on page 44 Figure 9. Removal steps of front camera Disconnect the front camera FPC connector and pull out the FPC. 47 Lenovo TAB 7 Hardware Maintenance Manual Figure 9. Removal steps of front camera (continued) 48 Lenovo TAB 7 Locations Model Version Lenovo TB‐7504F WLAN Lenovo TB‐7504X WLAN + LTE 1 2 3 4 5 6 5 7 11 8 9 10 1 Front camera 2 Speaker/Receiver 3 Indicator 4 Touch screen 5 Power button 6 Volume buttons 7 Rear camera 8 Micro USB connector 9 Headset connector 10 Card tray 11 Microphone Notes: The WLAN version (Lenovo TB‐7504F) does not have a Nano‐SIM card slot. 49 Lenovo TAB 7 Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 51 • “AC Adapter” on page 53 • “Screw” on page 53 • “Others” on page 53 Notes: • Each FRU is available for all types or models, unless specific types or models are specified. 50 Lenovo TAB 7 Overall 9 2 16 15 6 4 8 11 5 14 10 13 3 12 7 1 51 Lenovo TAB 7 Hardware Maintenance Manual Table 1. Parts list—Overall No. FRU FRU no. 1 MB, TB‐7504X MB1_16G&*715201004761 MB, TB‐7504X MB2_16G&*715201004771 MB, TB‐7504F MB1_16G&*715201004841 TP LCM Assʹy, TB‐7504 TP LCM Assy_W&*712601005351 TP LCM Assʹy, TB‐7504 TP LCM Assy_B&*712601005361 SUB Board, TB‐7504X SUB Board&*715201004861 CS FPC, TB‐7504 Main FPC Assy*712601005381 CS FPC, TB‐7504 Main FPC&*713300193021CS Mechaincal Parts , TB‐7504X Battery Cover _B&*712601005391 Mechaincal Parts , TB‐7504X Battery Cover _W&*712601005401 Mechaincal Parts , TB‐7504F Battery Cover _B&*712601005411 Mechaincal Parts , TB‐7504F Battery Cover _W&*712601005421 FPC, TB‐7504 Sidekey FPC&*713300193011CS Mechaincal Parts , TB‐7504 Battery Frame&*711500193031CS Camera, (B/S)CCM L545A20 5M Hi545 COB 24PIN BtoB Battery, (B/S)XWD‐A L16D1P33 3.85V13.5Wh 1cell bty Camera, TB‐7504 F Camera&*710200193021 CS Rubber, TB‐7504 P‐sence rubber&*712300193011 CS Speaker, TB‐7504F Speaker&*710320000061 CS Speaker, TB‐7504X Speaker&*710320100121 CS Cable, TB‐7504X RF Cable&*715302000451 CS Metal, TB‐7504X SIM Card&*715308002501CS Metal, TB‐7504F SIM Card&*715308002571CS Motor, TB‐7504 Vibrator&*710621000041CS Mic, TB‐7504X Mic&*710521000331 CS 5B28C09337 5B28C09338 5B28C09340 5D68C09342 5D68C09343 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 52 CRU ID N N 5P68C09344 5F78C09345 5F78C09369 5S58C09346 5S58C09347 5S58C09348 5S58C09349 N N 5F78C09321 5S58C09322 N N N 5SC28C14455 N SB18C15123 N 5C28C09329 5MO8C09334 5SB8C09326 5SB8C09327 5C18C09323 5M88C09324 5M88C09325 5M78C09368 5M48C09370 N N N N N N N Lenovo TAB 7 AC Adapter Table 2. Parts list—AC Adapters FRU FRU no. (B/S)charger&*5V*&1A UK BLACK C‐P58 (B/S)AC Adapter;C‐P58;5V/1A;UK;black (B/S)charger&*5V*&1A EU BLACK C‐P57 (B/S)AC Adapter;C‐P57;5V/1A;EU;black (B/S)Adapter&*5V*&1A AU Black C‐P59 (B/S)charger&*5V*&1A US BLACK C‐P56 (B/S)AC Adapter;C‐P56;5V/1A;UL;black (B/S)AC Adapter;C‐P45;5V/1A;BIS logo;IN;Black (B/S)Charger&*5V*&1A SK BLACK C‐P61 (B/S)Adapter&*5V*&1A AR BLACK C‐P60 5A19A464M6 SA18C01244 5A19A464M5 SA18C01243 5A19A464M7 5A19A464M4 SA18C01242 SA18C08973 5A19A464M9 5A19A464M8 CRU ID N N N N N N N N N N Screw Table 3. Parts list—Screw FRU FRU no. TB‐7504 Screw&*710922000481 CS 5M88C09331 CRU ID N Others Table 4. Parts list—Others FRU FRU no. TB‐7504 BB foil&*715000193011CS TB‐7504 TP mylar&*712100193021CS TB‐7504 Sealing label&*712700157211 CS 5D78C09330 5D78C09333 5L18C09335 CRU ID N N N 53 Lenovo TAB 7 Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON‐ INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non‐Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. 54 Notices Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development‐level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are either registered trademarks or trademarks of Lenovo in the United States and/or other countries: Lenovo® Lenovo logo® IdeaPad® VeriFace® OneKey Rescue® (OneKey Recovery, OneKey Antivirus) APS® Power Express® Energy Management and ReadyComm® The following terms are trademarks of Microsoft Corporation in the United States, other countries, or both: Windows® Windows® 7 The following are trademarks of Intel Corporation or its subsidiaries in the United States, other countries, or both: Intel® Intel®Core™ 2 Duo Other company, product, or service names may be the trademarks or service marks of others. 55 Lenovo TAB 7 Hardware Maintenance Manual 56
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:09:01 13:36:58Z Modify Date : 2017:09:04 13:48:46+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : FrameMaker 10.0 Metadata Date : 2017:09:04 13:48:46+08:00 Format : application/pdf Title : Lenovo TAB7 HMM_EN.book Creator : Document ID : uuid:8acbc610-422e-438c-8f62-383320c6ff2e Instance ID : uuid:c264e619-821e-4114-93dc-a3f620a20f8a Page Layout : SinglePage Page Mode : UseOutlines Page Count : 60EXIF Metadata provided by EXIF.tools