LifePrint LP001 Lifeprint Photo Printer User Manual manual LP 160816 2

Download:
Mirror Download [FCC.gov]
Document ID	3121558
Application ID	1mqbw0ZzTlKTNGQrEW43yA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.73kB (296627 bits)
Date Submitted	2016-09-02 00:00:00
Date Available	2016-09-02 00:00:00
Creation Date	2016-08-16 18:32:47
Producing Software	3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com)
Document Lastmod	2016-09-02 15:43:12
Document Title	manual_LP_160816_2
Document Creator	Adobe Illustrator CS6 (Windows)

10
15
20
25
40
35
30
45
50
55
60
65
DATE
Safety Precautions
User’s manual
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generate, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio, TV
technical for help.
Only shielded interface cable should be used.
10
Finally, any changes or modifications to the equipment
by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate
such equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of this device.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
A violation of labeling regulations can
cause serious injury or death
Changes and modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
It is desirable that it be installed and operated with at
least 20cm or more between the radiator and person’s
body(excluding extremities:hand,wrists,feet, and ankles)
2200
Table of Contents
WARNING
CE WARNING
Keep out of direct sunlight and away
from a heat source.
Do not place heavy objects on the
product.
Do not place containers of liquid
on the product.
STAND-BY
EN Test Regulations
ETSI EN 300 328 V1.9.1
ETSI EN 301 489-1 V1.9.2
Direct Current
ETSI EN 301 489-17 V2.2.1
EN 60950-1:2006+A11: 2009+A1:2010+A12:2011+A2:2013
FCC ID : 2AJH8LP001
BATTERY WARNINGS
Do not spray water directly onto the
product when cleaning.
Do not place the product in very low
temperatures.
Do not attempt to disassemble, repair
and remodel it for yourself.
Comply with rated (5V1A) voltage
and current.
Do not drop or give it impact.
1 Avoid contact with leaking or a damaged battery.
2 Do not short battery teminals.
3 Adult supervision is recommended when product is
used by young children.
4 Avoid areas of excessive heat or moisture.
5 Do not disassemble the battery.
This product contains electrical or electronic
materials. The presence of these materials
may. if not disposed of properly, have
potential adverse effects on the environment
and human health.
Presence of this label on the product means it should
not be disposed of as unsorted waste and must be
collected separately. As a consumer, you are responsible
for ensuring that this product is disposed of properly.
NOTICE
A violation of labeling regulations
causes minor injury or damage to the
product
Do not place the product in a hot or
humid place.
Do not place the product in a place
with humidity, dust and soot.
6 7
Names of parts
Safety Precautions
CAUTION
Keep out of the reach of children.
CONTENT
SIGN
Power on/off
Charging the battery
Cover Open method
Inserting printing paper
Description of LED Status
Indicators
10
Components check
11
Zink Smart Sheet
12
Application Connection
and Printing
13
- 0.10
- 0.20
- 0.25
- 0.35
~ 150
- 0.10
- 0.18
- 0.30
- 0.55
-+ 0.50
- 0.90
~ 500
- 0.30
-+ 0.90
-+ 1.50
~ 15
~ 50
Names of parts
- 0.05
- 0.07
~5
- APP Connection
Android Connection
ios Connection
- Printing (both for Android & iOS)
- Setting (both for Android & iOS)
Keep away from magnetic interference.
Product specifications
18
Items to check before
reporting a malfunction
19
Wipe it with a dry cloth when cleaning.
3 4
8 9
Power on/off
Charging the battery
Cover Open method
15
Micro USB Port (only for charging)
NO
75
70
Description of LED Status
Indicators
Top cover
Open
Push
Push the
power button
Charge indicator LED
Status indicator LED
Kesnsington lock
Reset button
ON Press the power button for about 3 to 5 seconds.
Status Indicator
OFF Press the power button for about 2 seconds.
Charging Indicator
Note
20
When you turn on the power, the operating status
LED indicator blinks for about 5 seconds.
You can print it out when the blinking ends,
and the LED is turned on white.
Paper exit
Inserting printing paper
This device has a built-in battery.
Make sure that the battery is charged fully before use.
Charging Operating Current
status
status
status
indicator indicator
Average charging time: About 1 hour and 30 minutes
Prepare the blue Smart Sheet and white printing paper
after unpacking the photo printing paper pack.
Off
Turn on the power
to print.
Checking charging status indicator
Open the top cover and insert the Smart Sheet and
printing paper as shown in the figure.
Standby/
On
Wait for print
command. Turn off
automatically after
the set time.
Charging status indicator
Description of status
Charging in progress
Charging in The battery is
being charged.
progress
Charging completed
Charging in The battery is fully
completed charged.
Notice
Power off, image
Operating/ transmission, image
Flashing processing, printing,
cooling standby
The use of a non-standard charger can cause
malfunction and exception from the subjects of
warranty service.
There may be the risk of electric shock during
the process of charging, so please use with care.
25
Details
Error/
Flashing
Do not give abnormal impacts.
No paper, paper jam,
cancel operation,
cover open, low
battery, image not
supported, update
failure, etc.
30
Components check
Zink Smart Sheet
®
ZINK Smartsheet
www.ZINK.com
Must Load! Barcode facing
バーコードを下にして必ず読み込ませてください
装纸时需将此纸放于底部
Application Connection and
Printing
- Android Connection
FROM ZINK IMAGING
Features
Provide optimum image quality correction suitable
for each printing paper pack
Remove foreign objects from printer head.
Print
35
How to use
Zink photo paper
- ios Connection

読み込み時は用紙の１番下に入れてください
W888-0134B

1. Select the exclusive APP and execute it after turn
on the printer.
2. Select the printing menu on the top of the left
main screen of APP.
3. Press the Connect button.
4. Connect the “Lifeprint (XX:XX)” from the searched
lists.
5. It will be connected with paired printer.
1. Execute the Lifeprint App.
1. Turn on the power of the device.
2. Select the designed photo on main screen.
2. For Bluetooth connection, change the mode to
“Turn on” [Bluetooth] from [Settings] of the device.
3. Connect “Lifeprinter (XX:XX)” in the searched list.
(MAC Address can be checked in the label inside
the device.)
3. Press the PRINT IMAGE button.
4. Press the completed printing button on the top of the
right screen after edit on Photo-editor mode.
5. Press the SEND button at the bottom of line.
Eject automatically before printing out the paper
in initial output.
Poor quality and occurrence of horizontal lines can be
improved by repeatedly printing 2 to 3 times.
Recycle until the printing paper of each printing paper
pack is exhausted.
USB Cable
Notice
40
Manual
Optimum image quality cannot be guaranteed
when the Smart Sheet of each printing paper pack
is not used, or the bar code is damaged.
Long-term storage after opening the printing
paper pack can have a bad effect on printing
quality due to a discoloration or distortion of
printing paper.
Rerulator sheet
11 12
16 17
13 14
18 19

6. Be moved main screen automatically after press the
printing button on the top of the left screen.
7. Press the PRINT QUEUE at the bottom of line.
8. Select the image for printing, the image will be saved
45
1. Select the Print button on the top of the left screen
on Main
2. Do setting and checking for each functions on Devices
screen.
on waiting list after send the image.
Product specifications
Type
Size
Paper size
50 x 76 (mm)
Problems
Type of supported
image file/size
PNG(2550x3300)JPEG(baseline)
Within a maximum of 10M Byte
Progressive JPEG not supported
The power does
not turn on.
Paper used
ZINK Paper (for Pomini only)
Paper storage
conditions
Product operating
conditions
Temperature : 20 ~ 25°C
Humidity : 40 ~ 55% RH
Temperature : 5 ~ 40°C
Humidity : Less than 70% (35°C)
Temperature : 15 ~ 32°C
Humidity : Less than 70%(32°C)
Power on/Standby/
Communication/Charge/Error/
Print/Update
Optimal print
conditions
LED display
disconnect
connect
Function
Description
Communication
External connection
terminal
connect
Setting with Print
USB power supply
Rated DC 5V / 1.0A
adapter (optional)
Battery
Battery Gauge indication
Normal operating
voltage
DC 8V
Accumulated total printed
Built-in battery
images with using printer
500mAh lithium ion
(rechargeable)
Proper image
resolution
Weight

50
PRINT COUNT
55
VERSION
Firmware Version indication
UPDATE
Available or not for Updating
LIFEPRINT STORE
Move to STORE
PRINT QUEUE
Waiting list for Printing image
Items to check before
reporting a malfunction
Bluetooth 4.0
Micro USB port (charging only)
More than 1280 x 2448 pixel
186g
Android : 4.0 or higher
iOS : 5.1 or higher
(Support may not be provided
depending on the user’s Smart
phone version and environment.)
※ Product design and specifications are subject to
change without notice.
Support App
version
Checklist
Check to see if the battery is
charged.
Reboot the Bluetooth of the
phone, or connect directly from
Bluetooth
connection is not the Settings menu.
established.
Try connecting in about 5
minutes after turning on the
power to the device.
The paper is automatically
Printing paper
ejected if you turn on the power
seems to be
after turning it off. Print it after
jammed.
printing out the Smart Sheet 2
to 3 times.
The printing paper should be
Stopped during
printing operation. stored in an environment with
low temperature/humidity.
Do not fold or crumble the paper.
The power turns
off automatically
after a certain
period of time.
The printed photo
shows a line.
A slash mark
appears in the
middle of the
photo.
Check the Auto Time Off value
within “Settings” -> “see more”
of the App.(None, 3 minutes,
5 minutes, 10 minutes)
The operating status LED
flickering Red indicates there is
no power remaining on the
battery. In this case, charge the
battery with a dedicated adapter.
Print it again after printing out
the Smart Sheet 2 to 3 times.
(A line may appear in case
an impact is applied to the printer
during the printing operation.)
症状
Problems
Checklist
This device requires the proper
White LED flashes temperature of (15~32°C) to
and printed paper facilitate smooth printing
does not come out. operation. Thus, a greater
warm-up time is required in
temperatures that are lower
than ideal, and cooling times
Printed paper
are greater when the temperature
comes out too late. is higher than ideal. Please wait
a moment to reach the proper
temperature.
The printed image
quality differs
greatly from the
original image
quality.
The image quality is somewhat
degraded when editing the image
using Pomini App’s Edit menu.
Print it again after printing out the
Smart Sheet 2 to 3 times.
The Smart Sheet within the same
pack with printing paper should
be used.
Check to see if the image has the
proper resolution (1280x2448) or
higher.
COLOR
PROCESS
MATERIAL
The printed image quality cannot
be guaranteed in case you use
printing paper of other companies.
Use the original printing paper.
CMYK
Offset Printing
The above methods Turn on the power after pressing
do not resolve the the Reset Hole with a pointed
problems.
object.
NO
DRAWN
CODE
DESIGN
MATERIAL
CHECK
APPRO
DATE
TOL
TREATMENT
2016.08.08
SCALE
UNIT
SIZE
m/m
Q'TY
NAME
A1 DWG NO
MODEL
REMARK
MANUAL USER (Japan)
GK07X0000100
DS Global. co., ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:08:16 18:32:47+10:00
Creator                         : Adobe Illustrator CS6 (Windows)
Title                           : manual_LP_160816_2
Modify Date                     : 2016:09:02 15:43:12Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com)
Page Count                      : 1

EXIF Metadata provided by EXIF.tools