LifeShield BSC1001 BSC1001 Base Unit User Manual New Base Device Guide indd

LifeShield, Inc. BSC1001 Base Unit New Base Device Guide indd

User Manual 1 Device Guide

Base Installation Instructions
Model BSC1001
CAUTION:
This equipment cannot report an alarm over the telephone line when
other non-LifeShield equipment (telephone, answering system,
computer modem, etc.) conected to the same line is in use.
Battery Warning
Rechargeable Lithium Ion Batteries Must Be Recycled or Disposed
of Properly. Do not mutilate the battery pack. Do not dispose of the
battery pack in a fire due to risk of explosion.
LIFESHIELD LIMITED WARRANTY FOR PRODUCTS AND
ACCESSORIES PURCHASED IN THE UNITED STATES OR CANADA
WHAT IS COVERED UNDER THIS WARRANTY
Subject to the limitations and exclusions contained below, LifeShield,
Inc. (“LifeShield”) warrants the LifeShield-branded (including all
embedded software) sold by LifeShield for use with the LifeShield
Security System (the “Products”) to be free from defects in
materials and workmanship under normal consumer usage and in
accordance with the accompanying instructions and documentation,
for the period(s) set forth below. This warranty extends only to the
first consumer purchaser, and is not transferable. LifeShield, at its
option, will at no charge repair, replace or refund the purchase price
of any Products that do not conform to this limited warranty. We may
use functionally equivalent reconditioned/ refurbished/pre-owned or
new Products or parts and we may retain all replaced Products or
parts. No data added to your Products, including but not limited to
component names and system preferences, will be reinstalled. This
limited warranty is the consumer’s exclusive remedy, and applies
to new Products purchased by consumers in the United States or
Canada, which are accompanied by this written warranty.
PRODUCTS COVERED/LENGTH OF COVERAGE (the “Warranty
Period”)
New Products: One (1) year from the date of purchase by the first
consumer purchaser of the Product.
Products That Are Repaired or Replaced.
The balance of the original warranty or for ninety (90) days from the
date returned to the consumer, whichever expires later. Batteries.
Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this limited
warranty.
HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION
To obtain service or information, please call: LifeShield Customer
Service at: 1-888-392-2044
Or email us at: support@LifeShield.com
You will receive instructions on how to ship the Products, at your
expense, to a LifeShield Authorized Repair Center. To obtain service,
you must include:
a) a copy of your receipt, bill of sale or other comparable proof
of purchase
b) a written description of the problem
c) the complete physical address of the location where the
system was installed and most importantly
d) your address and telephone number and,
e) the “Return Merchandise Authorization” or “RMA” number
that LifeShield provides to you
WHAT IS NOT COVERED (EXCLUSIONS)
Normal Wear and Tear. Periodic repair and replacement of parts due
to normal wear and tear are excluded from coverage. Ornamental
Decorations. Ornamental decorations, such as emblems and graphics
and other decorative elements, are excluded from coverage.
Abuse & Misuse. Defects or damage that result from the following
are excluded from coverage:
a) improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to
the surface of the Product;
b) contact with moisture, liquids, water, rain, extreme humidity,
heavy perspiration or makeup, sand, dirt or the like, food,
or proximity to or exposure to heat or cold, fire, flood, or
lightning;
c) other acts which are inconsistent with the instructions and
documentation that accompany the Products; and
d) use of the Products with any system other than the LifeShield
Security System.
Use of Non-LifeShield Products and Accessories. Defects
or damage that result from the use of Non-LifeShield branded
or certified products, accessories, software or other peripheral
equipment are excluded from coverage, including without limitation
defects or damage to Products that result from such use are
excluded from coverage. Unauthorized Service or Modification.
Defects or damages resulting from service, testing, adjustment,
installation, maintenance, alteration, including without limitation,
software changes, or modification in any way by someone other than
LifeShield, or its authorized agents, are excluded from coverage.
Altered Products. Products with the following characteristics are
excluded from coverage:
a) serial numbers or date tags that have been removed, altered
or obliterated;
b) broken seals or Products that show evidence of tampering;
c) mismatched board serial numbers; or
d) nonconforming or non-LifeShield housings, antennas,
or parts.
Communication Services. Defects, damages, or the failure of
Products due to any communication service or signal not provided
directly by LifeShield is excluded from coverage.
Out of Warranty Products. Defects or damages reported to LifeShield
after the Warranty Period are excluded from coverage.
Other Exclusions and Limitations
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED IN DURATION
TO THE TERM OF THIS EXPRESSED WARRANTY. THE REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY OF THE
CONSUMER, AND LIFESHIELD’S SOLE AND EXCLUSIVE LIABILITY
HEREUNDER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. IN NO EVENT SHALL LIFESHIELD BE
LIABLE, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE)
OR OTHERWISE, FOR DAMAGES IN EXCESS OF THE PURCHASE
PRICE OF THE PRODUCT GIVING RISE TO THE DAMAGES, OR FOR
ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE USE OF OR THE ABILITY OR
INABILITY TO USE THE PRODUCTS OR SOFTWARE TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. SOME
STATES AND JURISDICTIONS DO NOT ALLOW THE LIMITATION OR
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR A
LIMITATION ON THE DURATION OF IMPLIED WARRANTIES, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR FROM
ONE JURISDICTION TO ANOTHER.
This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state or from one jurisdiction to
another.
© LifeShield, Inc., 2011. Rev 1/2011.
Protected by US patents and patents pending.
7 629 880, 7 532 114 7,511,614, 7,495,544, 7,283,048, 7,202,789,
7,119,658, 7,091,827, 7,084,756, 7,079,034, 7,079,020, 7,057,512,
7,053,764, 7,042,353, 7,023,341, 7,019,639, 6,888,459, D538,797,
D534,519, D534,146
LifeShield Security
© 2011 LifeShield, Inc. All rights reserved. LifeShield is a registered
trademark and LifeShield Security is a trademark of LifeShield, Inc.
Contact Information
Website: www.LifeShield.com
Mail: LifeShield, Inc. Customer Support
770 Township Line Road, Suite 350
Yardley, PA 19067
Phone: 1-888-392-2044
E-mail: support@LifeShield.com
Honeywell is a trademark of
Honeywell International, Inc. Li-ion
-
+
Page Button
All LifeShield products work together as a system to protect your
home. They must be installed in a specific order to work properly.
The Base must be installed first followed by the Console and other
components.
Base Kit Components
BSC1001 Base
PSC0101 Power Adapter
LS220 Li-ion Rechargeable Battery
Phone Cord
Internet Cable
Install the Base
(Only 1 Base may be used on a system)
Install Battery
a) Locate the LifeShield LS220 Rechargeable Battery.
b) Remove the stand by sliding the table stand downward from
the main body of the Base.
c) Insert the battery, observing correct polarity as shown.
When viewed from the front (the side with the logo and the
openings for the siren), the positive terminal should be on
the right.
d) Replace the table stand by sliding upward onto the main body
of the Base.
NOTE: LED will illuminate briefly when Battery is first connected.
Connect Power Adapter
• Do not use an electrical outlet that is controlled by a switch.
• Insert the power adapter plug fully into the jack on the back of
the Base. Plug the power adapter into the wall outlet.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY.
NOTE: Use only LifeShield LS220 Rechargeable Battery supplied with
your Base. Use only PSC0101 Power Supply. Do not use any other
adapter.
Replacement battery packs are also available through the
LifeShield’s Customer Support at 1-888-392-2044 or on-line at
www.LifeShield.com.
Place the power adapter cord so that it does not create a trip hazard,
or become pinched and create an electrical hazard.
Connect Base to the Internet
(and optionally to Telephone Line)
Connecting the Base
a) Connect the Ethernet cable between an available port on your
router and the back of the Base.
b) Optionally connect the telephone cord to the Base and
telephone wall jack. The telephone line provides a backup
path for alarm communications if your internet connection is
not functioning.
When Using a DSL Modem
Plug a DSL filter into the telephone line splitter (which is in turn
plugged into a wall phone jack). Plug one end of a telephone cord
into the DSL filter and the other end into the telephone line jack in
the Base. Connect a second telephone cord from your router into the
telephone splitter.
Replace the Base in an Existing System
This section ONLY applies if you have an existing system with a
malfunctioning Base and need to replace the Base. This section does
not apply to new systems.
Delete the original Base from the system
1. On an existing Console, use the SCROLL and SELECT buttons
to navigate to GC or Handset (Menu/Security Setup/GCs or
Handset).
2. Scroll to the Base name, press the SELECT key.
3. Scroll to Delete, press the SELECT key.
4. Press OK key to confirm.
Note: In certain configurations, you may have to wait for the Console
to synchronize to another unit. This process should only last a few
moments.
Add the new Base to the system:
1. Remove all cords from back of the new Base (power cord,
phone, Ethernet) and remove battery from new Base. Wait
1 minute.
2. Connect only the power cord to the new Base and
immediately press and hold the PAGE button on the new
Base for about 45 seconds until the new Base sounds a
success tone (4 ascending beeps). You may release the
button.
3. On an existing Console, use the SCROLL and SELECT buttons
to navigate to GC or Handset (Menu/Security Setup/GCs or
Handset).
4. Press the SELECT key to <Add New>. The system will begin
searching for the new Base.
5. The system display and audio signal will inform you the Base
is found. Press OK.
6. You will then be given the option to edit the default name
7. Use DELETE to erase the current name and replace with new
text by using the keypad.
8. Press OK.
Connect battery and Ethernet cord (and optional telephone line,
if applicable) to the Base. Allow 3 minutes for the System to
synchronize.
NOTE: If you are installing a router for the first time, refer to your
router installation instructions before connecting the Base.
FCC Information
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
CAUTION:
Changes and modifications to this product not expressly approved by
LifeShield, Inc. could void not only the user’s authority to operate this
device, but also the limited warranty.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna
• Reorient or relocate and increase the separation between the
LifeShield equipment and radio or television receiver
• Connect the LifeShield equipment into an outlet on a circuit
different from that to which the radio or television receiver is
connected
• Consult the dealer or an experienced radio/TV technician
for help
The antenna used with this product must be installed to provide a
separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be serviced only by Lifeshield, Inc. or its
authorized agents.
FCC Part 68
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the equipment there is a
label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA.
Registration No.: Found on the bottom of the unit.
The Ringer Equivalence Number (REN) for this is used to determine
the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined
by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a
REN of 0.3).
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that a temporary
discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify you as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the operation
of the equipment. If this happens, the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty
information, please contact LifeShield, Inc. at 1-888-392-2044 or
support@LifeShield.com. If the equipment is causing harm to the
telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to a party line service is subject to state tariffs. Contact
the state public utility commission, public service commission or
corporation commission for information.
You must not connect your phone to:
• Coin-operated systems
• Most electronic key telephone systems
If your home has separate wired alarm equipment connected to the
telephone line at the same time LifeShield equipment is installed,
ensure the installation of both sets of equipment do not interfere
with one another. If you have questions about what will disable the
equipment, consult your telephone company or a qualified installer.
CAUTION:
To ensure proper operation, this equipment must be installed
according to the enclosed installation instructions. To verify that
the equipment is operating properly and can successfully report
an alarm, this equipment must be tested immediately after
installation, and periodically thereafter, according to the enclosed test
instructions.
-
+
Page Button
-
+
Page Button
-
+
Page Button

Navigation menu