Loopcomm Technology LP-8697N Compact 802.11 B/G/N Wireless USB Dongle (2T2R) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2700885
Application ID	pKzaeeqqxZsv5ydYh9oGIQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.87kB (348422 bits)
Date Submitted	2015-08-02 00:00:00
Date Available	2015-08-03 00:00:00
Creation Date	2015-07-28 14:58:47
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2015-07-30 17:34:33
Document Title	User manual
Document Creator	Acrobat PDFMaker 10.0 Word 版
Document Author:	RD-1213

Quick Installation Guide
Model: LP-8697N
High Power Wireless-300N Compact USB Adapter
NOTE: Do not insert the USB adapter until the software/driver has been installed.
Insert the Setup CD
Install Software
The menu page should appear.
Select the instruction for your operating system and
install the driver for the USB adapter.
Follow the Instructions for Driver Installation
A. From the Menu page, select Driver Installation
B. Start the Driver Installation
If the Menu page does not appear, browse the
CD drive and double-click the autorun.exe file
if prompted, click Next to begin the installation
C. Continue the Driver Installation
D. Restart your Computer
Follow the instructions that appear for installation
A prompt will appear asking you to restart your
computer. Select Yes and click Finish to restart.
E. Insert the High Power USB Adapter
After the computer has fully rebooted, locate a USB port and insert the
USB Adapter. Windows should automatically begin to install the driver
for using the USB Adapter.
Quick Installation Guide
Model: LP-8697N
Windows 7
1. Connect to a Wireless Network
2. Connect to a Wireless Network
Locate the Wireless Icon in the Windows
System tray (bottom right corner) and click it to
view available wireless Networks. Highlight your
desired network and click Connect.
If the network you are trying to connect to has
security enabled you will need to enter it here.
Windows 8.1
1. Connect to a Wireless Network
2. Connect to a Wireless Network
Click it to view available wireless Networks.
Select the Wireless Network and tick mark the
button to connect automatically & press “Connect”.
Enter the Security Key then click “Next”.
3. The Wi-Fi Network is connected successfully.
Quick Installation Guide
Model: LP-8697N
How to Upgrade your Antenna
Upgrading your antenna can provide more range and distance for different types of wireless applications. The
Loopcomm High Power USB Adapter is compatible with any High Gain 2.4 GHz Wi-Fi antenna with a RP-SMA
connector. Simply unscrew the original antenna and screw on the upgraded antenna for more range and distance.
For more information on High Gain antennas visit our Loopcomm website.
Troubleshooting Tips
PROBLEM: I inserted the CD but the Installation Menu does not appear.
SOLUTION: Windows: Click Start, click My Computer (or Computer) and double-click your CD-ROM drive. Locate the autorun.exe
file and double-click it.
REGULATORY INFORMATION
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Radiation Exposure and Hazard Statement:
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the
antenna of the device will be greater than 0.5cm away from all persons. Using higher gain antennas and types of
antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end
users of the product must adhere to the installation instructions provided in this manual. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Non-modification Statement:
Use only the integral antenna supplied by the manufacturer when operating this device. Unauthorized antennas,
modifications, or attachments could damage the TI Navigator access point and violate FCC regulations. Any
changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
Copyright © 2015 Loopcomm Technology Inc. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : RD-1213
Create Date                     : 2015:07:28 14:58:47+08:00
Modify Date                     : 2015:07:30 17:34:33+08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:07:30 17:34:33+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 Word 版
Document ID                     : uuid:f551591a-6ef8-4618-b949-92c68d6ad0fd
Instance ID                     : uuid:a2a5016b-afdd-496d-b26b-2947ddaa27e0
Subject                         : 341
Format                          : application/pdf
Creator                         : RD-1213
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20150728065533
Company                         : 
Page Layout                     : OneColumn
Page Count                      : 3

EXIF Metadata provided by EXIF.tools