Lumenetix LCT001 Light Commissioning Tool User Manual
Lumenetix Inc Light Commissioning Tool
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1809764 |
| Application ID | t1oM0jKPbJawI5qHB/kItA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.92kB (823978 bits) |
| Date Submitted | 2012-10-08 00:00:00 |
| Date Available | 2012-10-08 00:00:00 |
| Creation Date | 2012-09-21 17:57:48 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2012-10-05 18:05:44 |
| Document Title | Lumenetix_39056_Instruction_Manual_v5-3kg-FCC-092112 |
| Document Creator | Adobe Illustrator CS5 |
Adjusting Color Temperature (CCT) Copy and Paste Copy and Paste Cont. Copy and Paste Cont. Calibration Copy a Lumenetix Lamp SELECT CCT UP SCAN SELECT COPY TARGET CALIBRATION SCAN SELECT COPY Increasing the Color Temperature • The color temperature can be adjusted from 2700K to 4200K in increments of 100K • Press the CCT UP key to increase the color temperature • The selected color temperature is shown in the display Decreasing the Color Temperature • The color temperature can be adjusted from 4200K to 2700K in increments of 100K TARGET SCAN SELECT COPY Selecting the Lamp to Copy • Using the SCAN SELECT button, select the light to be copied • Continue to press SELECT until the desired lamp flashes The distance that the gray card was held from the lamp that was copied should be equal to the distance that the gray card is held from the lamp to be pasted • Aim the light commissioning tool at the center of the Gray Card PASTE CALIBR A TION • Press and hold PASTE for two seconds. The Display will read “Paste” Select the Target Lamp • Press the TARGET button • To target a different lamp in the wireless network, continue to press TARGET until the desired lamp blinks green Network Scan POWER CALIBRATION • Press the SELECT button to access the active lamp in the network • The active lamp will flash • To access other lamps in the wireless network, continue to press SELECT until the desired lamp blinks amber • Simultaneously press the COPY and PASTE buttons • The brightness and color temperature will be shown in the display • Upon completion the lamp will flash twice Federal Communication Commission Interference Statement Dimming BRIGHTNESS UP LAMP ON / OFF SELECT SCAN SELECT SCAN SELECT CCT 3000K DIM 100% DISPLAY COPY TARGET PASTE CALIBRATION TARGET COPY PASTE TARGET PASTE CALIBRATION CALIBRATION COPY TARGET PASTE CALIBR A TION CCT UP BRIGHTNESS UP BRIGHTNESS DOWN SELECT BRIGHTNESS DOWN CCT DOWN 3 x AAA COPY COPY TARGET PASTE CALIBR A TION Scan the Wireless Network to Discover Lamps SCAN SELECT • Aim the remote control at the lamp(s) and press and hold SELECT until the display indicates that the light commissioning tool is scanning the network to discover all lamps PASTE TARGET • Wirelessly controls araya lamp power on/off, brightness, and color temperature • Copy and Paste – copy a Lumenetix lamp and paste it onto a Lumenetix lamp • Calibration – Compensates for different LED aging characteristics • Insert 3 AAA batteries ensuring that the positive and negative terminals are correctly matched • Replace the battery case • Press the POWER button and the selected lamp will turn on • To access another lamp in the network, press SELECT again. The next lamp in the network will flash. • The brightness and color temperature will be shown in the display • After a few seconds, the active lamp will flash • The display indicates the quantity of lamps discovered on the network • The display will update to indicate the lamp within the network SCAN SELECT • Remove the battery case on the back of the remote control by pushing the tab in and sliding the cover down • The active lamp in the network flashes in Network Scan • Continue to press SELECT until the desired lamp flashes LAMP ON / OFF REMOTE CONTROL Light Commissioning Tool Functions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SCAN SELECT SCAN SELECT SCAN SELECT SCAN SELECT COPY For assistance with the operation of the Light Commissioning Tool, please visit www.lumenetix.com • The lamp will begin calibration of the LEDs Lamp On and Off HOLD 2 SEC SCAN SELECT SCAN SELECT PASTE • Keep the Light Commissioning Tool steadily pointed at the Gray Card until the lamp flashes twice, indicating that the operation is complete Select a Lamp SCAN TARGET • Hold the Gray Card in the center of the beam of the lamp to be pasted. The ideal distance from the lamp is 4 feet (120 cm) • The active lamp will blink green Inserting the Batteries COPY CALIBR A TION • The active lamp will flash TARGET Light Commissioning Tool Model Number LCT Zero SCAN SELECT • Use the Gray Card included in the Light Commissioning Tool SCAN SELECT COPY PASTE Paste TARGET • To access another lamp in the wireless network, press SELECT again (the next lamp in the network will flash) Instruction Manual TARGET CALIBRATION • Press and hold COPY for two seconds. The Display will read “Copy” • The selected color temperature is shown in the display SCAN / SELECT HOLD 2 SEC HOLD 2 SEC • Aim the light commissioning tool at the center of the Gray Card PASTE CALIBRATION • Press the Color Temperature DOWN key to decrease the color temperature Introduction PASTE COPY • Hold the Gray Card in the center of the beam of the lamp to be copied. The ideal distance from the lamp is 4 feet (120 cm) PASTE CCT DOWN • Use the Gray Card included in the Light Commissioning Tool CCT 3000K DIM 100% • To turn the lamp off, press the POWER button • If the lamp does not light, check the dimming level and adjust to the desired brightness (see next page) Increasing the Brightness • The brightness can be adjusted from 5% to 100% in increments of 1% • Press the brightness UP key to increase the brightness • The selected dimming level is shown in the display This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Decreasing the Brightness • Press the brightness DOWN key to dim the lights This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • The selected dimming level is shown in the display FCC ID: Q8A-LCT001 • The lamp can be dimmed from 100% to 5% in increments of 1%
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 Create Date : 2012:09:21 17:57:48+09:00 Metadata Date : 2012:10:05 18:05:44+08:00 Modify Date : 2012:10:05 18:05:44+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 120 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13629 bytes, use -b option to extract) Instance ID : uuid:c2baba81-d433-4191-b6c3-7088f3326125 Document ID : xmp.did:3321310EA303E2119118D6A3916120EF Original Document ID : xmp.did:F97F1174072068118DBBB92BD8B4CDAC Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:F97F1174072068118DBBB92BD8B4CDAC, xmp.iid:FA7F1174072068118DBBB92BD8B4CDAC, xmp.iid:FB7F1174072068118DBBB92BD8B4CDAC, xmp.iid:FC7F1174072068118DBBB92BD8B4CDAC, xmp.iid:FD7F1174072068118DBBB92BD8B4CDAC, xmp.iid:22E516701C2068118DBBB92BD8B4CDAC, xmp.iid:29E516701C2068118DBBB92BD8B4CDAC, xmp.iid:44244DC4322068118DBBB92BD8B4CDAC, xmp.iid:058011740720681197A5E416872736E8, xmp.iid:068011740720681197A5E416872736E8, xmp.iid:078011740720681197A5E416872736E8, xmp.iid:AA4D8AB01F20681197A5E416872736E8, xmp.iid:AB4D8AB01F20681197A5E416872736E8, xmp.iid:AC4D8AB01F20681197A5E416872736E8, xmp.iid:AD4D8AB01F20681197A5E416872736E8, xmp.iid:AE4D8AB01F20681197A5E416872736E8, xmp.iid:AF4D8AB01F20681197A5E416872736E8, xmp.iid:B04D8AB01F20681197A5E416872736E8, xmp.iid:00801174072068118F628DE2EE621C4F, xmp.iid:404A81B7302068118F628DE2EE621C4F, xmp.iid:0180117407206811871FFA8E48FBF77F, xmp.iid:0280117407206811871FFA8E48FBF77F, xmp.iid:F77F1174072068118F62A7224FEE6CAA, xmp.iid:F87F1174072068118F62A7224FEE6CAA, xmp.iid:F97F1174072068118F62A7224FEE6CAA, xmp.iid:FA7F1174072068118F62A7224FEE6CAA, xmp.iid:0280117407206811871FB7FC94C94596, xmp.iid:F77F1174072068119109FB682E3D18AA, xmp.iid:F87F1174072068119109FB682E3D18AA, xmp.iid:F97F1174072068119109FB682E3D18AA, xmp.iid:FB7F1174072068119109FB682E3D18AA, xmp.iid:BDD61116182068119109FB682E3D18AA, xmp.iid:15A4229954F2E111B6C68743C8646AAF, xmp.iid:3321310EA303E2119118D6A3916120EF History When : 2012:03:12 11:05:33-07:00, 2012:03:12 11:27:56-07:00, 2012:03:12 11:27:56-07:00, 2012:03:12 11:42:22-07:00, 2012:03:12 12:11:55-07:00, 2012:03:12 13:56:53-07:00, 2012:03:12 16:15:52-07:00, 2012:03:12 17:01:19-07:00, 2012:04:04 10:18-07:00, 2012:04:04 10:18:21-07:00, 2012:04:04 10:18:22-07:00, 2012:04:04 14:18:54-07:00, 2012:04:04 14:18:54-07:00, 2012:04:04 14:30:03-07:00, 2012:04:04 14:55:20-07:00, 2012:04:04 14:55:20-07:00, 2012:04:04 15:05:49-07:00, 2012:04:04 15:08:01-07:00, 2012:04:05 11:17:16-07:00, 2012:04:05 11:39:30-07:00, 2012:04:06 06:50-07:00, 2012:04:06 06:51:53-07:00, 2012:04:09 15:29:20-07:00, 2012:04:09 15:29:20-07:00, 2012:04:09 15:47:11-07:00, 2012:04:09 15:48:43-07:00, 2012:04:10 11:17:13-07:00, 2012:04:10 14:22:15-07:00, 2012:04:10 14:22:26-07:00, 2012:04:10 14:22:26-07:00, 2012:04:10 14:33:05-07:00, 2012:04:10 16:28:21-07:00, 2012:08:30 11:53:18+08:00, 2012:09:21 17:57:45+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /metadata, /, /, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, / Derived From Instance ID : uuid:e84bc39a-484f-4d7b-8cac-e20a604faeb8 Derived From Document ID : xmp.did:15A4229954F2E111B6C68743C8646AAF Derived From Original Document ID: xmp.did:F97F1174072068118DBBB92BD8B4CDAC Derived From Rendition Class : proof:pdf Doc Change Count : 737 Format : application/pdf Title : Lumenetix_39056_Instruction_Manual_v5-3kg-FCC-092112 Producer : Adobe PDF library 9.90 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 1956.000000 Max Page Size H : 864.000000 Max Page Size Unit : Pixels Font Name : Frutiger-Bold, Frutiger-Light, Helvetica-Bold, Helvetica, HelveticaNeueLTStd-Bd Font Family : Frutiger, Frutiger, Helvetica, Helvetica, HelveticaNeueLTStd Bd Font Face : 65 Bold, 45 Light, Bold, Regular, Bd Font Type : Type 1, Type 1, TrueType, TrueType, Unknown Font Version : 001.002, 001.002, Version 1.3 (Hewlett-Packard), Version 1.3 (Hewlett-Packard), Version 5.00 Font Composite : False, False, False, False, False Font File Name : FTB____.PFB; FTB____.PFM, FTL____.PFB; FTL____.PFM, helr65w.ttf, helr45w.ttf, kaiu.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Black 7 C, PANTONE 7466 C, PANTONE 143 C Swatch Groups Group Name : 預設色票群組 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE Black 7 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : RGB Swatch Groups Colorants Red : 83 Swatch Groups Colorants Green : 83 Swatch Groups Colorants Blue : 74 Page Count : 1 Container Version : 11 Creator Version : 15 Creator : Adobe Illustrator(R) 15.0 For : Gary, Bounding Box : 72 12 1838 841 Image Height : 829 Image Width : 1766 Image Size : 1766x829 Megapixels : 1.5EXIF Metadata provided by EXIF.tools