Luminex 5842 12-Bluetooth Ceiling Light User Manual 351 1542

Download:
Mirror Download [FCC.gov]
Document ID	3099863
Application ID	Lfq3i5YqcSbDjvl+Rj3iEw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	381.92kB (4773987 bits)
Date Submitted	2016-08-16 00:00:00
Date Available	2016-08-17 00:00:00
Creation Date	2015-06-26 16:51:53
Producing Software	Adobe PDF library 9.90
Document Lastmod	2016-08-08 17:34:41
Document Title	351-1542
Document Creator	Adobe Illustrator CS5

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
352-5842
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
Warning: LED electronics can be damaged by electro static discharge (ESD)shock. Before
installation, discharge yourself by touching a grounded bare metal surface to remove this
hazard. To avoid damage, do not touch the LED module.
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Long Screw(D)
Wire Nut (E)
Important to Know:
Features:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source. Using non-replaceable LED bulb.
3. Mobile device requirements:
IOS 8.x or later.
Android v4.4 or later.
Phone must also have Bluetooth version 4.0 or
later.
1. Energy saving LED fixture.
2. Customize your color temperature from Warm White
to Daylight.
3. Sync multiple units.
4. Set on/off schedule.
5. IOS & Android™ compatible.
Outlet Box
House Grounding Wire
Wire Nut (E)
Maximum Wattage: 18 W
Working Temperature Range: 14°F ~ 122°F
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Key Hole Slot
Long Screw (D)
Ceiling Pan
LED Module
Driver with Bluetooth
module
Stud
Fig.1
Long Screw
Slot
Installtion Steps
Plastic Shade
Turn off the power at fuse or circuit box
1. Remove the plastic shade from ceiling pan.
2. Attach the two long screws to the holes on the mounting strap.
Thread them in part way: 2 to 3 turns only.
3. Attach the mounting strap to the outlet box using two mounting screws.
Page 1 / 8
160607
4. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green
grounding screw, and then connect them to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
5. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes. Rotate the ceiling
pan until it is locked into place, and then tighten the long screws to secure it. (See Fig.1)
6. Attach the plastic shade back to the ceiling pan by aligning studs with slots, and turn it clockwise until it is locked in
place.
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326
Spare Parts List:
Assembly Kit
5564MM (1 SET)
Mounting Strap (A)
Long Screw(D)
Green Grounding
Screw (C)
Mounting Screw (B)
Wire Nut (E)
Plastic Shade
9821PS
Troubleshooting
Problem
The fixture will not light.
The fixture is not
responding to the APP.
The APP is not turning
on the light fixture.
The APP is not finding
the light fixture.
Possible Cause
Solution
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the on
position.
Bluetooth is not turned on.
Turn Bluetooth “on” in the device’s
settings.
The Power to the light is turned off.
Turn on the power to the light.
Bluetooth is not turned on.
Turn Bluetooth “on” in the device’s
settings.
Bluetooth is not turned on.
Turn Bluetooth “on” in the device’s
settings.
The fixture is occupied by other users.
Have existing user turn off Bluetooth
connection.
Connection failure.
Re-start Bluetooth and APP.
Out of connection distance.
Ensure your device is within 32 feet
of the narrowest light fixture and
ensure each light is within 32 feet.
Page 2 / 8
160607
5-Year Limited Warranty:
This Patriot Lighting fixture carries a limited warranty against defects in material or workmanship. If the Patriot Lighting
product fails at any time within five (5) years after the original date of sale due to defects in material or workmanship,
return the product to Menards with the original sales receipt. At its discretion, Patriot Lighting will replace the defective
fixture with the same or similar fixture or issue a refund. This warranty and any implied warranty (including but not limited
to any implied warranty of merchantability or fitness for a particular purpose) does not cover glass globes, light bulbs and
other expendable items. This warranty excludes coverage of finish or color against tarnishing, flaking, and discoloration.
If the original purchaser ceases to own the Patriot Lighting product this warranty and any implied warranty will be void.
This warranty does not cover damage caused by misuse or abuse, including but not limited to improper installation,
improper usage, accident, negligence, unauthorized repair, unauthorized modifications, or unauthorized maintenance of
the fixture. This warranty does not include reimbursement for inconvenience, installation, setup time, returned shipping
charges or defects, losses, labor, injuries to personal property.
This warranty gives the consumer specific legal rights, and the consumer may have other rights which vary from state to
state. The seller’s employees are not qualified to advise on the use of the fixture. Any oral representations made will
not be binding on seller or its employees.
For questions regarding this product, call toll-free at 1-800-887-6326.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
Page 3 / 8
160607
User Guide
Setting for single light through mobile device (Take IOS for example as below.
Android will be slightly different).
Fig.1
1. Search “Robbie LED” at Apple
store or Android Google Play.
Download the “Robbie LED” APP
onto the device. Start the APP.
Fig.2
2. Turn on Bluetooth to allow
“Robbie LED” to connect to
accessories. Press “Settings”
and turn on Bluetooth.
Fig.5
Fig.4
4. Select the top right “
” icon,
then turn on the power of light
fixture. Bluetooth searches the
light which needs be selected.
Select “OK” and then select
top left “
” icon.
5. Select the Bluetooth device.
Fig.3
3. Turn off the power for light
fixture at this time, and then
select the “Add” icon.
Fig.6
6. Select “Dimming” to control on/
off, color temperature and
brightness.
Page 4 / 8
160607
Fig.8
Fig.7
7. Select “Scene” to choose default
scenes or customize your own.
8. Select “Settings” to set on/off schedule,
change the name of the light, and find
the latest APP version to upgrade.
Setting for multiple lights through mobile device (Take Android system for
example as below. IOS will be slightly different)
Fig.9
1. Select the multiple lights that
have been found, then press
“OK”.
Fig.10
2. Press and hold one light, then
drag to another light to creat
a group. The fixtures grouped
will flash 3 times.
Fig.11
3. The group you have created
is now shown in the list.
Page 5 / 8
160607
4. Press and hold group light icon
to rename Group.
Fig.14
Fig.13
Fig.12
6. Select “ ” icon to change the
setting of single light or Group.
5. Select Group1 to control on/off,
color temperature and
brightness. Also scenes and
setting for group lights.
Sharing light fixtures with another user.
User may share or receive existing light fixtures with another user through following
instructions:
A: Share My Lamps
Fig.15
1. Select top left “
” icon and
select “ Share My Lamps”.
Fig.16
2. QR code will be generated,
allow another user to scan.
Page 6 / 8
160607
B: Add Lamps by Share
Fig.17
1. Select top left “ ” icon and
select “Add Lamps By Share”.
Fig.18
2. Scan the QR code generated from
another user to gain access of their
light fixtures.
Reset Light Fixture
Fig.19
1. Turn off the power of light
fixture then select “Add”
icon.
Fig.20
2. Select top right “ ” icon, then
turn back on the power of light
fixture.
Page 7 / 8
160607
Fig.22
Fig.21
3. Select the light fixtures you want
to reset by pressing “Reset”, and
press “OK” to proceed.
4. Select “I Know” then turn the
light fixture “OFF” and “ON”
immediately to complete the
reset.
Page 8 / 8
160607

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2015:06:26 16:51:53+08:00
Creator                         : Adobe Illustrator CS5
Modify Date                     : 2016:08:08 17:34:41+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : 351-1542
Creator Tool                    : Adobe Illustrator CS5
Metadata Date                   : 2016:08:08 17:34:41+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 32
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 3911 bytes, use -b option to extract)
Rendition Class                 : proof:pdf
Original Document ID            : uuid:65E6390686CF11DBA6E2D887CEACB407
Document ID                     : xmp.did:2B2762CFC91BE5118C30DA54463D1F1B
Instance ID                     : uuid:a2fef126-1e83-4265-aba6-6ed25b38158b
Derived From Instance ID        : uuid:761113f0-7e39-4a2b-923b-12bf5f7f2c44
Derived From Document ID        : xmp.did:7810F6C98B19E511913B939BAC1D3D3E
Derived From Original Document ID: uuid:65E6390686CF11DBA6E2D887CEACB407
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved
History Instance ID             : xmp.iid:BDBAA6CE4904E5118B1FECC7A029A8A6, xmp.iid:7810F6C98B19E511913B939BAC1D3D3E, xmp.iid:2B2762CFC91BE5118C30DA54463D1F1B
History When                    : 2015:05:27 16:24:35+08:00, 2015:06:23 17:39:48+08:00, 2015:06:26 16:51:51+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\16.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\9.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\7.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\5.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\reset\5.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\reset\4.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\reset\3.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\reset\1.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\11-2.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\11-1.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\11.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\11.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\5-1.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\4-1.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\4.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\3-1.jpg, D:\phoebe document\instruction\MN\2016\Jersy\多等黑白图片\2.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\6.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\5.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\4.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\2.jpg, D:\phoebe document\instruction\MN\2016\Jersy\黑白图片\1.jpg
Startup Profile                 : Web
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 210.001652
Max Page Size H                 : 296.999959
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT
Font Family                     : Arial, Arial
Font Face                       : Regular, Bold
Font Type                       : Open Type, Open Type
Font Version                    : Version 2.95, Version 5.06
Font Composite                  : False, False
Font File Name                  : Arial_0.ttf, Arial Bold.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Web 颜色组
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: R=189 G=204 B=212
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Red     : 189
Swatch Groups Colorants Green   : 204
Swatch Groups Colorants Blue    : 212
Producer                        : Adobe PDF library 9.90
Page Count                      : 8

EXIF Metadata provided by EXIF.tools