Lutron Electronics 0020 HRD-5KP User Manual RF KP Instr

Lutron Electronics Company Inc HRD-5KP RF KP Instr

USERS MANUAL FOR HRD TRANCEIVER

Please Read Before InstallingRF Designer-Style KeypadsHRD-5KP, -5RL, -10KP, -10RL120/127VAC, 50/60Hz Installation InstructionsOverviewThe HRD-5KP, -5RL and HRD-10KP, -10RL keypadsare for use with HomeWorks systems. The keypadbuttons are programmed with a personal computerusing the HomeWorks Utility. Up to 32 keypads, each with a unique address, can beassigned to each HomeWorks RF Processor. HRD-5KPHRD-10KP HRD-10RLHRD-5RLImportant NotesCodes: Install in accordance with all local and nationalelectrical codes.Environment: Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing.Indoor use only.Wallplates: Lutron Claro®and Satin ColorsTM wallplatesare recommended for best color match and clean aes-thetic appearance. Do not paint controls or wallplates.Cleaning: Clean with a soft damp cloth only. Do not useany chemical or abrasive cleaners.Wallboxes: Lutron recommends using 3.5" (89mm) deepwallboxes for easier installation. RF Device Placement: RF Keypads must be locatedwithin 30 feet (9m) of an RF Signal Repeater or an RFProcessor. RF Keypads will not function until they are addressedand programmed. See the HomeWorks Utility onlinehelp.
Mounting DiagramWallboxWallplateAdapter* Wallplate*KeypadMountingScrewsKeypadAdapterMountingScrews2* Wallplate and Adapter are purchased separately.1. Turn power OFF at fusebox or circuit breaker.2. Prepare wires. When making wire connections, fol-low the recommended strip lengths and combina-tions for the supplied wire connectors. Note: Wireconnectors provided are suitable for copper wireonly. Small: Strip insulation .375" (10mm) for14AWG (2.5mm2). Strip insulation .5" (13mm) for 16AWG(2.5mm2).Use to join one 14AWG supply wirewith one 16 or 18AWG (1.0mm2) con-trol wire.3. Wiring: See Wiring Diagram (page 3)4. Push all wires back into the wallbox and loosely fastenthe control to the wallbox using the screws provided.Do not pinch the wires.5. Attach Lutron Claro®or Satin ColorsTM wallplateadapter and wallplate. a. Loosely install keypad mounting screws.b. Tighten adapter mounting screws snug.c. Tighten keypad mounting screws until keypadis flush to wall (do not over-tighten).d. Snap wallplate onto adapter.6. Restore power.Included:Wire Connectors (3)Mounting Screws (2)InstallationDanger - Locate and remove fuse or lock circuitbreaker in the OFF position before proceeding.Wiring with power ON may result in personalinjury.Small
3Troubleshooting GuideRF Keypads will not function until they are addressed and programmed. See the HomeWorks Utility online help.Keypad is working properly when LEDs light up and loads respond as buttons are pressed.Symptom Cause and ActionPower not present at keypad• Circuit breaker OFF. Turn ON breaker.• Wiring error. Check wiring to be sure it agrees with installationinstructions and wiring diagram.LEDs don't light up.Wiring Diagram120/127V50/60HzHot/Live BlackGreenEarth/GroundNeutral WhiteLEDs cycle from top to bottom sequentially. Keypad is properly powered but...• Keypad has not been addressed. See the HWI Utility online helpfor addressing details.LEDs light when pressed, but the system response is not correct. Improper programming • Check programming in HWI Utility.Keypad is properly powered but...• Keypad has not been programmed. See the HWI Utility onlinehelp for programming details.Keypad is out of RF communications range.• Move RF Repeater or RF Processor to within 30 feet of keypad.LEDs blink twice while cycling from top to bottom sequentially.Keypad cannot be addressed.
Lutron Electronics Co., Inc. 7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 11/02 P/N 043-111 Rev. ALIMITED WARRANTYLutron will, at its option, repair or replace any unit that is defective in materials or manufac-ture within two years after purchase. For warranty service, return unit to place of purchase ormail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephonethe Lutron Technical Support Center toll free at 800-523-9466. After the two year period, apro-rated warranty applies to this product until eight years after the purchase. For more infor-mation regarding this warranty contact your Lutron representative.THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THEIMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING ORINSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUTOF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.This warranty gives you specific legal rights, and you may also have other rights which varyfrom state to state. Some states do not allow limitations on how long an implied warranty lasts,so the above limitation may not apply to you. Some states do not allow the exclusion or limi-tation of incidental or consequential damages, so the above limitation or exclusion may notapply to you.This product may be covered by one or more of the following U.S. patents:4,835,343; 4,889,999; 5,170,068; 5,237,207; D378,814; D436,579 and corresponding foreignpatents. U.S. and foreign patents pending. Lutron, Claro, and HomeWorks are registeredtrademarks and Satin Colors is a trademark of Lutron Electronics Co., Inc.© 2002 Lutron Electronics Co., Inc.Technical and Sales AssistanceIf you need assistance, call the toll-free LutronTechnical Support Center. Please provide exactmodel number when calling.(800) 523-9466 (U.S.A., Canada and the Caribbean)Other countries call:Tel: (610) 282-3800Fax: (610) 282-3090Visit our Web site at www.lutron.comFCC InformationNote: This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed in accordancewith the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by Lutron Electronics Co. couldvoid the user’s authority to operate this equipment.Industry Canada InformationThe term “IC:” before the radio certification number only signifies that Industry Canada tech-nical specifications were met.

Navigation menu